1. Introduction
Porcine epidemic diarrhea (PED) lethally affects newborn piglets during their first week of life, causing severe watery diarrhea, fatal dehydration, and high mortality [
1,
2]. PED virus (PEDV), an etiological agent responsible for PED, is a swine coronavirus belonging to the subgenus
Pedacovirus of the genus Alphacoronavirus within the family
Coronaviridae of the order
Nidovirales [
3]. The virus has a single-stranded, positive-sense RNA genome of about ~28 kb comprising at least seven open reading frames (ORFs). The first large ORF1a and ORF1b encode the polyproteins 1a and lab, which proteolytically mature to produce 16 nonstructural proteins (nsp1–16). Conversely, the remaining ORFs encode four canonical coronaviral structural proteins, the spike (S), envelope (E), membrane (M), and nucleocapsid (N) proteins, and a single accessory gene, ORF3 [
1,
4,
5]. Based on S gene phylogeny, PEDV strains can be grouped into two main genotypes with two sub-genotypes: low pathogenic (LP) genotype 1 (classical G1a and recombinant G1b) and highly pathogenic (HP) genotype 2 (local epidemic G2a and global epidemic or pandemic G2b) [
1,
2].
Since the 2013–2014 PEDV pandemic originating in North America, this swine enteric coronavirus has posed a major health and economic threat to the global pig population [
1]. Thus, a large amount of research effort has been invested into controlling PED in the field, and accordingly, substantial information about the molecular epidemiology and genetic evolution of PEDV has been gathered [
1,
2]. However, the mechanisms underlying PEDV replication and pathogenesis have not yet been fully deciphered. Because laboratory procedures to isolate epidemic PEDV strains in cell culture and to manipulate the PEDV genome have proven challenging, a better understanding of such key viral processes has been hampered. In recent years, the latter task has been achieved by targeted RNA recombination technology [
6] or reverse genetic approaches [
7,
8,
9,
10].
The reverse genetics (RG) system is a robust technological advancement in modern virology for studying virus molecular biology and pathogenic mechanisms, as well as for developing new and effective viral vectors and vaccines. To date, some RG methods have been developed for both LP-G1a and HP-G2b PEDV strains, in which infectious cDNA clones were constructed by in vitro ligation under the T7 promoter [
7,
8] or engineered into a bacterial artificial chromosome (BAC) plasmid under the cytomegalovirus (CMV) immediate-early promoter [
9,
10]. However, a versatile RG platform is not yet available for the Korean field strains of PEDV. In this study, we generated the first infectious cDNA clones of an HP-G2b Korean prototype strain, KNU-141112 [
11], and its live attenuated vaccine (LAV) strain, S DEL5/ORF3 [
12,
13], in BAC under the control of a eukaryotic CMV promoter. Transfection of each BAC plasmid into Vero cells recovered progeny infectious PEDVs, icKNU-141112, and icS DEL5/ORF3, with phenotypic and genotypic characteristics comparable to each respective parental virus. In addition, using the DNA-launched HP-G2b PEDV infectious cDNA clone, pBAC-CMV-KNU-141112, as a backbone, two recombinant viruses were constructed that had either the ORF3 or S gene swapped with a reporter gene expressing the enhanced green fluorescent protein (EGFP) or a heterologous S gene expressing the variant S protein, respectively. Our BAC-based RG system will serve as a next-generation vaccine platform for PED, as well as for other emerging veterinary or human diseases.
2. Materials and Methods
2.1. Cells, Virus, and Antibodies
Vero cells (ATCC CCL-81) were cultured in alpha minimum essential medium (α-MEM; Invitrogen, Carlsbad, CA, USA) with 5% fetal bovine serum (FBS; Invitrogen) and Penicillin–Streptomycin (PS, 100×; Invitrogen). The cells were maintained at 37 °C in an atmosphere of humidified air containing 5% CO
2 incubator. The Korean HP-G2b PEDV strain KNU-141112 and its LAV strain S DEL5/ORF3 were propagated in Vero cells with virus growth medium (α-MEM supplemented with 1% PS and 0.3% tryptose phosphate broth (TPB; Sigma-Aldrich, St. Louis, MO, USA), 0.02% yeast extract (Difco, Detroit, MI, USA), 10 mM HEPES (Invitrogen), and 5 µg/mL trypsin (USB, Cleveland, OH, USA) as described previously [
13]. Each viral stock from the fifth passage in cell culture (KNU-141112-P5 and S DEL5/ORF3-P5) was prepared and served independently as a parental virus in this study. The PEDV N protein-specific monoclonal antibody (MAb) was obtained from ChoogAng Vaccine Laboratory (CAVAC; Daejeon, South Korea). The anti-ORF3 MAb was prepared in our laboratory using the recombinant ORF3 protein from PEDV strain KNU-141112 as the immunogen, which was produced using a mammalian cell-based transient gene expression system as described previously [
14,
15]. Antibodies specific for EGFP and β-actin were purchased from Abcam (Cambridge, UK) and Santa Cruz Biotechnology (Santa Cruz, CA, USA), respectively. The horseradish peroxidase (HRP)-conjugated goat anti-mouse IgG secondary antibody was obtained from Cell Signaling Technology (Danvers, MA, USA). Alexa Fluor 488-conjugated and Alexa Flour 594-conjugated goat anti-mouse secondary antibodies were acquired from Invitrogen.
2.2. Assembly of Full-Length PEDV cDNA Clones in BAC
The full-length nucleotide (nt) sequences of PEDV KNU-141112 and S DEL5/ORF3 (GenBank accession numbers KR873434 and KY825243, respectively) were independently used as a reference for the construction of each infectious cDNA clone in the BAC system using a three-step strategy as described previously [
16]. In the first step, the whole genome of KNU-141112-P5 was divided into seven continuous fragments (1F to 7F) flanked by compatible restriction sites as follows: 1F, nt 1–2806; 2F, nt 2806–6808; 3F, nt 6808–13009; 4F, nt 13009–15880; 5F, nt 15880–23570; 6F, nt 23570–27185; 7F, nt 27185–28038 (
Figure 1a). Since the large-sized fragment may be inherently unstable in the bacteria, the 3F and 5F were further subdivided into two (3F-1, nt 6808–9502; 3F-2, nt 9502–13009) or three (5F-1, nt 15880–19042; 5F-2, nt 19042–21540; 5F-3, nt 21540–23570) sub-fragments, respectively. The restriction sites, namely
MluI,
AvrII,
PacI,
AatII,
ClaI, and
BspT104I, which naturally occurred in the KNU-141112 genome, were selected, whereas two unique
FseI (15880) and
AscI (23570) sites in the fragment 5F were newly created at each terminus by introducing silent mutations (A15883C/A15884G and A23570G/T23573G/A23574C/A23576C, respectively), which were maintained as rescue markers. The locations of each enzyme site at the two ends of each fragment or sub-fragment are shown in
Figure 1a. In addition, the CMV promoter sequence, with a
BamHI restriction site at its 5′ end, was added to the 5′ terminus of fragment 1F by overlapping PCR. The synthesized essential element sequences, including the 26-nt adenine sequence (26 pA), the hepatitis delta virus (HDV) ribozyme self-cleavage site (Rz), the bovine growth hormone (BGH) transcription terminal sequence, and a
HindIII restriction site, were appended to the 3′ terminus of fragment 7F. Each of the fragments flanked by the respective restriction sites was PCR amplified using Platinum SuperFi Green PCR Master Mix (Invitrogen) and specific primer sets (available upon request), gel purified using the QIAEX II Gel Extraction Kit (Qiagen, Hilden, Germany), and then individually subcloned into the pCR-XL-2-TOPO vector (Invitrogen). All the subclones were verified by Sanger sequencing. Second, as a backbone to harbor the full-length PEDV clone, the plasmid pBeloBAC11 (NEB, Ipswich, MA, USA) was modified to insert a synthesized linker consisting of the unique restriction enzyme sites (
MluI,
PacI,
FseI,
AscI, and
BspT104I), between
BamHI and
HindIII sites (
Figure 1a), and the resulting BAC plasmid was named pBAC-CMV. Lastly, each subclone was digested from the corresponding pCR-XL-2-TOPO plasmid with specific enzymes collected with a gel extraction kit and sequentially assembled into the pBAC-CMV cassette vector step by step in an order (7F, 1F, 3F, 2F, 4F, 5F, 6F) using available restriction sites with DNA Ligation Kit LONG (TaKaRa, Otsu, Japan). The ligation mixture was electroporated into E. coli DH10B using a MicroPulser Electroporator (Bio-Rad Laboratories, Hercules, CA, USA). All the intermediate constructs were purified with NucleoBond Xtra Maxi Kit (Macherey-Nagel, Düren, Germany) and verified by restriction analysis and DNA sequencing before proceeding to the next assembly, and the resultant BAC plasmid was designated as pBAC-CMV-KNU-141112. An identical strategy was used to generate the full-length cDNA clone of S DEL5/ORF3 in the BAC system, named pBAC-CMV-S DEL5/ORF3 (
Figure 1b). The genetic integrity of both PEDV infectious clones was verified by extensive restriction analysis and full-length nucleotide sequencing. DNA manipulation and cloning were performed according to standard procedures [
17].
2.3. Rescue of Infectious PEDVs
The final BAC plasmids were prepared using the NucleoBond Xtra Maxi Kit (Macherey-Nagel, Düren, Germany). In addition, the pBud-PEDV N plasmid was constructed by cloning the PCR-amplified KNU-141112 N gene into the pBudCE4.1 expression vector (Invitrogen) and used to supplement the N gene in trans for increased virus recovery from the cDNA clone as described previously [
7]. For in vitro transfection, Vero cells were seeded into a 6-well tissue culture plate at 3.5 × 10
5 cells/well in Opti-MEM (Invitrogen) containing 10% FBS and then maintained in a humidified incubator at 37 °C and 5% CO
2 for 24 h until approximately 90% confluency. The cells were co-transfected with 2 µg of the corresponding BAC plasmid (pBAC-CMV-KNU-141112 or pBAC-CMV-S DEL5/ORF3) and 1 µg of the pBud-PEDV N plasmid using 9 µl of FuGENE HD (Promega, Madison, WI, USA), according to the manufacturer’s protocols. At 18 h post-transfection, the cells were washed twice and then replenished with Opti-MEM supplemented with 5 µg/mL trypsin to assist in virus recovery and spread. The culture supernatants were harvested at 4–7 days post-transfection upon the visual observation of cytopathic effects (CPE) characterized by syncytium formation as described previously [
11], and each infectious-clone-derived (ic) “passage 0 (P0)” PEDV was designated icKNU-141112-P0 or icS DEL5/ORF3-P0. The rescued P0 viruses were then subjected to plaque purification. A single, well-isolated plaque was picked, resuspended in virus growth medium, and stored as the P1 icPEDV stocks at −80 °C. Subsequently, each icPEDV-P1 was serially passaged on Vero cells for10 passages (P10), as described previously [
13]. Each passage icPEDV was aliquoted and stored at −80 °C until use. The full-length genome of each P5 and P10 icPEDV stock was verified by Sanger sequencing, as previously described by our group [
11,
13,
18,
19].
2.4. Immunofluorescence Assay (IFA)
Vero cells grown on microscope coverslips placed in 6-well tissue culture plates were infected with parental (P5) and rescued (P10) PEDVs at a multiplicity of infection (MOI) of 0.1 for 1 h. At 24 h post-infection (hpi), infected cells were fixed with 4% paraformaldehyde for 10 min at room temperature (RT) and permeabilized with 0.2% Triton X-100 in PBS at RT for 10 min. The cells were blocked with 1% bovine serum albumin in PBS at RT for 30 min and then stained with PEDV N- or ORF3-specific MAb for 2 h. After washing five times in PBS, the cells were incubated at RT for 1 h with the Alexa Fluor 488-conjugated or 594-conjugated (only for icPEDV-EGFP) secondary antibody, followed by counterstaining with 4′,6-diamidino-2-phenylindole (DAPI; Sigma-Aldrich). The coverslips were mounted on glass microscope slides in a mounting buffer, and the stained cells were visualized under a Leica DM IL LED fluorescence microscope (Leica, Wetzlar, Germany).
2.5. Quantitative Real-Time RT-PCR (qRT-PCR)
For genomic RNA (gRNA) and subgenomic mRNA (sg mRNA) detection, Vero cells grown in 6-well tissue culture plates were infected with parental (P5) and rescued (P10) PEDVs at an MOI of 0.1. Total RNA was extracted from the lysates of infected cells at 24 hpi using the TRIzol Reagent (Invitrogen) and treated with DNase I (TaKaRa), according to the manufacturer’s instructions. The concentrations of the extracted RNA were measured using a NanoVue spectrophotometer (GE Healthcare, Piscataway, NJ, USA). The viral RNA was subjected to quantitative RT-PCR using a One Step PrimeScript RT-PCR Kit (TaKaRa) with primer/probe sets targeting gRNA and sg mRNA, as described previously [
12,
20,
21]. The reaction was performed using a CronoSTAR 96 Real-Time System (Clontech, Mountain View, CA, USA) according to the manufacturer’s protocol. Copy numbers of each amplicon were determined by standard curves as described previously [
12] and normalized with the mass of total cellular RNA. sg mRNA6 encoding N (sg mRNA-N) was also amplified in the sample as a control. The quantities of sg mRNAs were expressed as copies per 10
7 copies of gRNA.
2.6. Identification of Rescue Markers in icKNU-141112 and icS DEL5/ORF3
Total RNA was extracted from the lysates of cells infected with parental (P5) and rescued (P10) PEDVs at 24 hpi using the TRIzol Reagent and treated with DNase I. RT-PCR was independently conducted to amplify 1800 bp (genomic positions 15277–17076) and 1000 bp (genomic positions 23008–24007 and 22993–23992 in KNU-141112 and S DEL5/ORF3, respectively) fragments spanning FseI (15880) and AscI (23570 and 23555), respectively, that had been created as molecular markers in the rescued icPEDV, but not in the parental virus. The presence of rescue markers in the PCR amplicons was determined by restriction enzyme analysis with FseI and AscI and nucleotide sequencing.
2.7. Virus Titration
Vero cells were infected with parental (P5) and rescued (P10) PEDVs in the presence of trypsin at an MOI of 0.1. The culture supernatant was collected at various time points (6, 12, 24, 36, and 48) and stored at −80 °C. Virus titers were measured by plaque assay using Vero cells and defined as plaque-forming units (PFU) per ml, as described previously [
13]. In brief, Vero cells grown in 6-well plates were inoculated with 200 µL/well of 10-fold serially diluted virus suspensions containing trypsin and adsorbed for 1 h at 37 °C. The inoculated cells were overlaid with 2 mL of premixed virus growth medium and 1.5% Bacto Agar (Difco) and incubated at 37 °C for 2 days until appropriately-sized plaques were observed. At 48 hpi, the medium was removed, and the plaques were fixed with 7% paraformaldehyde and stained with 1% crystal violet in 5% ethanol.
2.8. Construction and Rescue of a Recombinant PEDV Expressing EGFP
The EGFP gene was inserted into the KNU-141112 genome by replacing ORF3, following the strategy described previously [
9]. Briefly, the EGFP gene was PCR amplified with flanking PEDV sequences and then exchanged with the ORF3 coding region of fragment 6F by overlapping PCR to generate the ORF3 deletion (DEL) EGFP 6F construct. Due to the presence of the transcriptional regulatory sequence (TRS) of the E subgenomic mRNA (sg mRNA) in the 3′ terminus of ORF3, the 3′-terminal 22-nt sequences remained preserved in the fragment 6F to prevent interference with the expression of the E protein. The modified fragment 6F, named 6F-OFR3 DEL-EGFP, was subcloned into the pCR-XL-2-TOPO vector. The subclone 6F-ORF3 DEL-EGFP was digested with
AscI and
BspT104I and gel purified. The pBAC-CMV-KNU-141112 plasmid was also digested with the same enzymes, and the original fragment 6F was replaced with the 6F-ORF3 DEL-EGFP harboring the EGFP gene via
AscI and
BspT104I restriction sites. The final recombinant clone was verified by full-length nucleotide sequencing and designated pBAC-CMV-KNU-141112-EGFP. The rescue and subsequent cell culture passage of pBAC-CMV-KNU-141112-EGFP were performed as described above. The recombinant PEDV rescued from this BAC plasmid was named icPEDV-EGFP. The full-length genome of each P5 and P10 icPEDV-EGFP stock was verified by Sanger sequencing, and icPEDV-EGFP-P10 virus was subjected to fluorescence microscopy and virus titration, as described above.
2.9. Western Blot Analysis
Vero cells were grown in 6-well tissue culture plates for 1 day and were infected with icKNU-141112-P10 and icPEDV-EFGP harvested at the indicated passage history (P2–P10) at an MOI of 0.1. At 48 hpi, the cells were harvested in 80 µL of lysis buffer (0.5% Triton X-100, 60 mM β-glycerophosphate, 15 mM ρ-nitrophenyl phosphate, 25 mM MOPS, 15 mM MgCl2, 80 mM NaCl, 15 mM EGTA [pH 7.4], 1 mM sodium orthovanadate, 1 µg/mL E64, 2 µg/mL aprotinin, 1 µg/mL leupeptin, and 1 mM PMSF) and sonicated on ice five times each for 1 s. The homogenates were lysed on ice for 30 min and clarified by centrifugation at 15,800× g (Eppendorf centrifuge 5415R, Hamburg, Germany) for 30 min at 4 °C. In addition, cells were infected with icKNU-141112-P10 and icPEDV-EGFP-P10 and lysed at the indicated time points as described above. The total protein concentrations in the supernatants were estimated using a BCA protein assay (Pierce, Rockford, IL, USA). The cell lysates were mixed with 4× NuPAGE sample buffer (Invitrogen) and boiled at 70 °C for 10 min. Equal amounts of total protein were separated on a NuPAGE 4–12% Gradient Bis-Tris Gel (Invitrogen) under reducing conditions and electrotransferred onto an Immobilon-P membrane (Millipore, Bedford, MA, USA). The membranes were subsequently blocked with 3% powdered skim milk (BD Biosciences, San Jose, CA, USA) in TBS (10 mM Tris-HCl [pH 8.0], 150 mM NaCl) containing 0.05% Tween-20 (TBST) at 4 °C for 2 h and reacted with the primary antibody against EGFP, N, or β-actin at 4 °C overnight. The blots were then incubated with the HRP-labeled secondary antibody at a dilution of 1:5000 for 2 h at 4 °C. Finally, the proteins were visualized using enhanced chemiluminescence (ECL) reagents (GE Healthcare), according to the manufacturer’s instructions.
2.10. Detection of EGFP Fluorescence Intensity
Vero cells at 2 × 104 cells/well were grown in 96-well tissue culture plates for 24 h and were mock infected or infected with icPEDV-EGFP-P10 at an MOI of 0.1. At the indicated time points, the cells were examined with a Leica DM IL LED fluorescence microscope, and pictures of the EGFP fluorescence images were obtained. Subsequently, the fluorescence intensity of EGFP was measured at 485/538 nm using a microplate fluorometer (Fluoroskan FL; Thermo Scientific, Waltham, MA, USA).
2.11. Clinical Sample Collection and Nucleotide Sequence Analysis
Clinical samples (feces and small intestine) submitted for laboratory diagnosis were collected from PED-affected swine farms located in eight different provinces nationwide from 2019 to 2022. The procedures for sample processing and RT-PCR for PEDV detection are described elsewhere [
18,
21,
22,
23].
The S glycoprotein gene sequences of PEDV-positive samples (
n = 97) were determined using Sanger sequencing. Two overlapping cDNA fragments spanning the entire S gene of each isolate were amplified by RT-PCR as previously described [
24]. The individual cDNA amplicons were gel-purified, cloned using the pGEM-T Easy Vector System (Promega), and sequenced in both directions using two commercial vector-specific T7 and SP6 primers and gene-specific primers. A total of 97 full S genes of PEDVs identified in this study have been deposited in the GenBank database under the accession numbers ON263410–ON263414, ON263422–ON263463, and OP186873–186932.
The sequences of fully sequenced S genes of global PEDV isolates were aligned using the ClustalX 2.0 program [
25], and the percentages of amino acid sequence divergences were assessed using the same software. Phylogenetic trees were constructed from an alignment of the amino acid sequences using the neighbor-joining method and were subjected to bootstrap analysis with 1000 replicates to determine the percentage reliability values for each internal node of the tree [
26]. A phylogenetic tree was generated using the Mega X software [
27].
2.12. Construction and Rescue of a Recombinant PEDV Harboring a Heterologous S Gene
The variant S gene was introduced into the KNU-141112 genome by replacing the S gene following the strategy as described below. Since the S gene spans the two sub-fragments, 5F-2 and 5F-3, and the fragment 6F in the BAC plasmid, these three (sub)fragments were independently used as a template to replace the KNU-141112 S gene coding sequence with that of the heterologous GNU-2110 S gene, designated S51, as described below, using overlapping PCR. Each modified fragment, namely 5F-2-S51, 5F-3-S51, and 6F-S51, was subcloned into the pCR-XL-2-TOPO vector. To construct a recombinant KNU-141112 clone with the variant S51 gene, three sub-fragments, 5F-1, 5F-2-S51, and 5F-3-S51, were first digested from the corresponding pCR-XL-2-TOPO plasmid with their specific enzymes and ligated with the pBAC-CMV-KNU-141112 plasmid pre-digested with FseI and AscI. The fragment 6F-S51, harboring the remaining S51 gene and the KNU-141112 structural genes, was then swapped with the original 6F fragment in the above-modified BAC plasmid via AscI and BspT104I restriction sites. The final recombinant plasmid exchanging the entire S gene sequence with that of GNU-2110 was named pBAC-CMV-KNU-141112-S51 and verified by full-length nucleotide sequencing. The rescue and subsequent cell culture passage of pBAC-CMV-KNU-141112-S51 were performed as described above. The nomenclature of a recombinant PEDV rescued from pBAC-CMV-KNU-141112-S51 was icPEDV-S51. The full-length genome of each P5 and P10 icPEDV-S51 stock was verified by Sanger sequencing, and icPEDV-S51-P10 virus was subjected to IFA and virus titration, as described above.
2.13. Serum Neutralization
The cross-neutralizing activity of antisera collected from sows vaccinated using second-generation G2b vaccines [
12,
21] was evaluated using a conventional virus neutralization test (VNT) in 96-well microtiter plates against icKNU-141112 and isPEDV-S51 as previously described [
21], with minor modifications. In brief, Vero cells at 2 × 10
4 cells/well were grown in 96-well tissue culture plates for 24 h. Each recombinant PEDV P10 stock was diluted in serum-free α-MEM to achieve 200 50% tissue culture infective doses (TCID
50) in a 50 μL volume. Inactivated antiserum samples were serially diluted in α-MEM (1:4 to 1:512) and mixed with an equal volume of each virus at 37 °C for 1 h. One hundred microliters of the mixture were added to Vero cells and incubated at 37 °C for 1 h. After removing the mixture, the cells were rinsed with PBS five times and maintained in a virus growth medium at 37 °C in a 5% CO
2 incubator for 2 days. The neutralizing endpoint titers were calculated as the reciprocal of the highest serum dilution that inhibited the virus-specific CPE by ≥80% relative to the controls in duplicate wells. The serum samples with neutralizing endpoint titers of ≥1:4 were considered to be positive for the PEDV-specific neutralizing antibody (NAb).
2.14. Structural Modeling and Sequence Alignment
The S glycoprotein 3-dimensional (3D) structure models of KNU-141112 and GNU-2110 were created based on the cryo-electron microscopy structure template with PDB accession code of 6vv5.1 using the SWISS-MODEL (
https://swissmodel.expasy.org, accessed on 19 August 2022) online tool [
28]. The S structure alignment of KNU-141112 and GNU-2110 was also performed by using the SWISS-MODEL server. In addition, the N-glycosylation sites were predicted by the NetNGlyc 1.0 server (
http://www.cbs.dtu.dk/services/NetNGlyc/, accessed on 31 July 2022).
2.15. Statistical Analysis
All values are expressed as the mean ± standard deviation of the mean difference (SDM). Statistical analyses were conducted using the GraphPad Prism 7 software package (GraphPad Software, San Diego, CA, USA). p-values less than 0.05 were considered to be statistically significant.
4. Discussion
The emergence or re-emergence of PEDV poses a significant global threat to animal health and long-lasting financial consequences for pork producers, which require cutting-edge research to improve our knowledge of virus biology and pathogenesis and to provide the basis for the development of intervention strategies. The advent of RG systems for most RNA viruses has aided viral genome manipulation and mutant construction for multiple purposes, ranging from the functional study of viral genes and protein to the development of vaccines. Due to the large size of the genome and the presence of the bacterial toxic domain, establishing such a state-of-the-art molecular tool for coronaviruses remains challenging. However, various alternatives to many traditional plasmid-based methods have been developed over the last decade [
30]. Likewise, two different RG approaches have been reported for PEDV, and PEDV research has benefited from these availabilities [
7,
8,
9,
10,
20]. The first approach is the T7 RNA polymerase-driven system, which comprises the in vitro ligation-based assembly of the full-length PEDV genome placed under the T7 promoter and in vitro transcription (IVT) and IVT RNA transfection [
31]. Two research groups have recently used this technique to successfully produce infectious cDNA clones for Chinese and US HP-G2b strains [
7,
8]. However, this method has several inconveniences, including the costs and degradation risks involved in IVT and RNA manipulation [
32]. The second approach is the DNA-launched BAC system that overcomes such drawbacks and is the most commonly used method, especially for viruses with large genomes [
10]. Jengarn et al. and Li et al. independently managed to establish such a system for the Thai LP-G1a and Chinese LP-G1a and HP-G2b PEDV strains, respectively [
9,
10]. In this paper, we report the construction of two BAC-based DNA-launched molecular clones for a HP-G2b Korean strain of PEDV, KNU-141112, isolated in November 2014 [
11], and its LAV strain, S DEL5/ORF3 [
13]. The recovery of infectious PEDV was performed by transfecting each full-length cDNA clone directly into Vero cells, demonstrating that both recombinant cloned viruses, icKNU-141112 and icS DEL5/ORF3, were genetically stable and phenotypically comparable in vitro to their respective parental strains.
In previous studies, two PEDV isolates belonging to LP-G1a, designated AVCT12 (Thai strain) and CHM2013 (Chinese strain), were successfully recovered from their respective DNA-launched full-length cDNA clones in BAC [
9,
33]. Both AVCT12 and CHM2013 strains identically contain a 52-nt DEL in an IGR between S and ORFS (22-nt DEL at the end of S and 30-nt DEL at the start of ORF3), thereby encoding the C-terminal 7-aa truncated S gene and the impaired ORF3 [
9,
33]. Unexpectedly, RG failed to rescue the recombinant AVCT12 virus bearing full-length functional ORF3, suggesting an inhibitory role of ORF3 in PEDV replication in vitro [
9]. In this study, however, the rescued icKNU-141112 efficiently produced an ORF3 protein comparable to its parental virus. Considering similar growth kinetics, the discrepancy between the two results is most likely related to the backbone sequence of the two AVCT12 and KNU-141112 strains. The Korean LAV strain, S DEL5/ORF3, which was obtained through serial passages and plaque cloning of HP-G2b KNU-141112 in cell culture, also possesses a 6-nt shorter DEL in S-ORF3 IGR than that in AVCT12 and CHM2013 strains, which removes the last 5-aa from the C-terminus of S and may interfere with ORF3 expression [
13]. It is worth noting that the complete synthesis of the sg mRNA-ORF3 occurred since the TRS of ORF3 is unaffected by the DEL in S-ORF3 IGR. However, ORF3 protein production in cells infected with S DEL5/ORF3 and icS DEL5/ORF3 was ablated, indicating that the 46-nt DEL in S-ORF3 IGR truly interrupts the ORF3 gene reading frame. Although current knowledge on ORF3 function remains limited, ORF3 is proposed to be a multifuntional protein that acts as an ion channel and modulates host responses, which may contribute to virus replication and pathogenicity [
34,
35]. Notwithstanding the loss of ORF3, icS DEL5/ORF3 had a relatively faster replication kinetics than that of icKNU-141112, the same as shown in their respective parental viruses. The difference in growth phenotype is consistent with the observation that S DEL5/ORF3 and icS DEL5/ORF3 mostly made larger plaques than those of wild-type KNU-141112 and icKNU-141112. Collectively, the high growth of ORF3-null icS DEL5-ORF3 shown in this study confirmed that ORF3 is dispensable for PEDV propagation in vitro.
Using the parental KNU-141112 infectious clone, we successfully generated the recombinant PEDV, icPEDV-EGFP, harboring EGFP at the ORF3 position that expresses EGFP instead of ORF3. The recombinant icPEDV-EGFP robustly produced EGFP and stably retained its intensity in infected cells for 10 serial passages while preserving a comparable growth ability relative to the parental icKNU-141112 virus. Consistent with previous studies [
7,
9], our results indicate that PEDV can tolerate the insertion of a foreign gene without negative selection. It is important to mention that despite comparable growth kinetics, ORF3-null icPEDV-EGFP produced syncytia and plaques greater than those from icKNU-141112. Our data from ORF3-null recombinant viruses (icS DEL5/ORF3 and icPEDV-EGFP) may dispute the nonessential role of ORF3 in cultured cells, as described above, suggestive of its relevance to PEDV cytopathology. Although we did not perform animal challenge experiments to assess pathogenic outcomes in vivo using icPEDV-EGFP, which can provide insights into understanding the correlation between ORF3 and PEDV virulence, accumulating evidence suggests that ORF3 may be an indispensable viral component to determine the pathogenic trait but insufficient to give rise to an attenuated phenotype of PEDV [
7,
12,
13]. Nevertheless, the precise function of the PEDV ORF3 protein in vitro and in vivo remains to be further elucidated in future studies. More importantly, the current results demonstrate that the DNA-launched RG platform for BAC-based PEDV established in this study can make the construction of recombinant PEDV expressing foreign antigens possible, which is invaluable for comprehending fundamental viral processes as well as for pioneering vaccine or viral vector development. However, this platform could be hindered by potential hurdles regarding the genetic instability of the foreign gene since the loss of exogeneous inserts is highly frequent in positive-sense RNA viruses, including coronaviruses [
9,
36,
37]. Although the molecular mechanism underlying exogeneous gene acceptance remains undetermined, several lines of evidence [
6,
9,
36], including the present study, have demonstrated that the size (e.g., EGFP, mCherry, and luciferase) and location (e.g., ORF3) of the gene of interest introduced is a crucial factor for the genetic retention of recombinant coronaviruses. Thus, our ongoing task includes extensive investigations to replace ORF3 with various external non-coronaviral genes in the PEDV genome without transforming the stability and suppressing the replication of the recombinant viruses. In addition, the recombinant icPEDV-EGFP expressing EGFP can be useful in high-throughput screening in cell cultures for detecting NAb levels and evaluating therapeutic compounds.
PEDV isolation in cell cultures from clinical samples of infected pigs can be fastidious and labor extensive [
11]. The virus isolation rate from PEDV-positive samples varies but is relatively very low, ranging from 2 to 10% [
11,
38]. In addition to difficulties in virus isolation, even isolated PEDV is often prone to lose infectivity upon further passages in cell culture [
11,
39]. The restricted success of the efficient isolation and propagation of PEDV in vitro is one of the key obstacles in performing varied PEDV research as well as developing effective vaccines in a timely manner. To overcome this basic constraint, the RG platform for BAC-based KNU-141112 was used to generate a recombinant icVOI by exchanging the S coding sequence of KNU-141112 with that of the field VOI (GNU-2110). We could then recover a VOI-like recombinant, icPEDV-S51, which encodes the full S gene from the field isolate GNU-2110 in the backbone of KNU-141112. GNU-2110 was selected as the candidate VOI because its S gene (named S51) was found to be the most genetically and phylogenetically divergent from that of KNU-141112, possibly leading to potential antigenic shifting. Remarkably, the antisera against KNU-141112 (NAb titers of ≥64) showed relatively weak reactivity and cross-neutralization toward heterologous S-expressing icPEDV-S51, suggesting that 51-aa variations in S51 are responsible for escaping from virus neutralization. Given that more than 30% of genetic drift in S51 was accumulated in NTD/S0 and COE neutralizing epitopes, some of these changes might contribute to the poor neutralization capacity of icPEDV-S51, albeit contributions from other mutations arising elsewhere in S cannot be excluded. Further structural analysis of PEDV S revealed that partial regions (residues 55–74 and 130–147) of the NTD/S0 neutralizing epitope on the S51 of GNU-2110 are conformationally heterologous to the counterpart in the S of KNU-141112. Compared to the KNU-141112 S protein, two other S glycan motifs were gained at sites N130 and N1195 on the GNU-2110 S protein (S51), and one “NKT” sequon at positions 130–132 was mapped within the conformation change on residues 130–147. More importantly, despite residing in a hypervariable region of the NTD/S0 domain, the “NKT” sequon (residues 130–132) is completely absent in the genome sequences of the other G2b strains identified, except for GNU-2110, but is often present in the LP-G1 strains. In addition, Li et al. (2017) described NAb escape mutants obtained by serial passaging of PEDV in vitro with high concentrations of S-specific neutralizing MAbs [
10]. In this previous study, escape mutants resistant to each neutralizing MAb were found to display 3-aa substitutions in S at positions 100 (F100L), 129 (P129L), or 638 (V638G) that resided in NTD/S0 (residues 19–220) and COE (residues 502–641) domains on the S1 subunit [
10]. Although none of these substitutions exist in S51, the “NKT” sequon (positions 130–132) is located next to a proline residue at position 129. Moreover, the glycan shield plays a critical role in the coronaviral S architecture, which is key to immune evasion and virus transmissibility [
40,
41]. Collectively, in addition to high mutations (almost 4% variation), the gaining of the glycan motif on the NTD/S0 neutralizing epitope domain may coat the S51 with the altered glycan shield topology and modify the S protein conformation, which in turn can afford some advantages (e.g., antigenic shift) that may allow the virus (i.e., GNU-2110) to evade host immune defenses, such as neutralizing antibodies, causing disease in immune animals.
In conclusion, this is the first report to describe the establishment of virulent and attenuated full-length cDNA clones of Korean HP-G2b PEDV in the BAC system, and it has been proven that DNA-launched molecular clones offer an effective recovery of infectious particles exhibiting phenotypic and genotypic traits analogous to parental viruses. Since the identification of virulence determinants or genes is key to understanding viral pathogenesis, the RG system for both HP and fully attenuated strains will aid future studies in investigating the importance of each genotypic DEL signature uncovered in S DEL5/ORF3 for the pathogenesis of PEDV. Given the continued emergence of new viral pathogens that endanger animal or/and human health, it seems obvious that the development of innovative, swift-responsive, and applicable intervention measures for disease control is necessitated. In this regard, our data documents that this RG platform can be used as a recombinant coronaviral vector vaccine that delivers a foreign antigen derived from any emerging veterinary or zoonotic viral pathogens in order to elicit protective immune responses. In South Korea, culturable Korean PEDV HP-G2b strains were unavailable until late 2014, one year after the HP-G2b virus was introduced into South Korea [
11,
42,
43], and subsequently, new G2b-based killed vaccines and LAV were developed and marketed in 2017 and 2020, respectively. Considering this timeline, difficult and time-consuming virus isolation and attenuation will be the main hindrances to be surmounted for the rapid development of new vaccines against prospective variants emerging in the near future. Since the molecular clone was proven to be a rational backbone to embark the S gene of VOI, this platform will conquer such challenges associated with virus isolation and attenuation. This technical breakthrough furnishes a promising tool to enable the genetic engineering of any recombinant VOI with specific genetic markers that are predicted to affect an immune escape. This will serve as a template for the prompt generation of new live and killed vaccines and usher in a new era of PEDV vaccine research.