Next Article in Journal
Enhanced Photocatalytic Activity of ZnO-Graphene Oxide Nanocomposite by Electron Scavenging
Next Article in Special Issue
The Efficacy of Silver Nitrate (AgNO3) as a Coating Agent to Protect Paper against High Deteriorating Microbes
Previous Article in Journal
Study of Phase Transitions Occurring in a Catalytic System of ncFe-NH3/H2 with Chemical Potential Programmed Reaction (CPPR) Method Coupled with In Situ XRD
Previous Article in Special Issue
Catalytic Activity of Beta-Cyclodextrin-Gold Nanoparticles Network in Hydrogen Evolution Reaction
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Catalysts
Volume 11
Issue 2
10.3390/catal11020185
catalysts-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles

by
Ivy L. Librando
1,
Abdallah G. Mahmoud
1,2,*,
Sónia A. C. Carabineiro
1,3,*,
M. Fátima C. Guedes da Silva
1,
Carlos F. G. C. Geraldes
4,5 and
Armando J. L. Pombeiro
1,6
1
Centro de Química Estrutural, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal
2
Department of Chemistry, Faculty of Science, Helwan University, Ain Helwan, Cairo 11795, Egypt
3
LAQV-REQUIMTE, Department of Chemistry, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
4
Department of Life Sciences, Faculty of Science and Technology, Calçada Martim de Freitas, 3000-393 Coimbra, Portugal
5
Coimbra Chemistry Center, University of Coimbra, Rua Larga Largo D. Dinis, 3004-535 Coimbra, Portugal
6
Research Institute of Chemistry, Peoples’ Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya Street, 117198 Moscow, Russia
*
Authors to whom correspondence should be addressed.
Catalysts 2021, 11(2), 185; https://doi.org/10.3390/catal11020185
Submission received: 7 January 2021 / Revised: 24 January 2021 / Accepted: 27 January 2021 / Published: 31 January 2021
(This article belongs to the Special Issue Gold, Silver and Copper Catalysis)
Browse Figures
Versions Notes

Abstract

:
A set of Cu(I) complexes with 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo-[3.3.1]nonane (DAPTA) phosphine ligands viz. [CuX(κP-DAPTA)3] (1: X = Br; 2: X = I) and [Cu(μ-X)(κP-DAPTA)2]2 (3: X = Br; 4: X = I) were immobilized on activated carbon (AC) and multi-walled carbon nanotubes (CNT), as well as on these materials after surface functionalization. The immobilized copper(I) complexes have shown favorable catalytic activity for the one-pot, microwave-assisted synthesis of 1,2,3-triazoles via the azide-alkyne cycloaddition reaction (CuAAC). The heterogenized systems with a copper loading of only 1.5–1.6% (w/w relative to carbon), established quantitative conversions after 15 min, at 80 °C, using 0.5 mol% of catalyst loading (relative to benzyl bromide). The most efficient supports concerning heterogenization were CNT treated with nitric acid and NaOH, and involving complexes 2 and 4 (in the same order, 2_CNT-ox-Na and 4_CNT-ox-Na). The immobilized catalysts can be recovered and recycled by simple workup and reused up to four consecutive cycles although with loss of activity.

1. Introduction

The interesting properties of 1,2,3-triazole based heterocycles have been a focus of scientific interest due to their manifold potential to interact with diverse systems, not only from a synthetic point of view but also in the context of biological and pharmacological applications [1]. The triazole ring system has been shown to be compatible with many functional groups and to exhibit good stability under several reaction conditions [2].
The copper catalyzed azide−alkyne cycloaddition approach (CuAAC) established by Meldal [3] and Sharpless [4] constitutes the most important protocol to obtain 1,4-disubstituted triazoles in a completely regioselective manner. Enormous efforts have been devoted to maximize the general efficiency of the CuAAC reaction during the last two decades [5,6]. However, the presence of a significant amount of expensive copper complexes in the end products remains a main challenge hampering the utilization of the CuAAC reaction for large scale applications [7,8]. A way to overcome this difficulty is to support the catalyst on solid matrices, a method that was revealed to be effective in achieving more sustainable processes, by preventing not only the accumulation of metal particles, but also the excessive use of reagents [9,10,11]. By attaching the complex to a solid support, it is possible to efficiently recover and reuse it in consecutive catalytic reactions and improve both catalytic activity and stability [12,13,14]. Many solid supporting matrices have been successfully utilized for catalytic applications [15,16], among which carbon structures have been privileged due to their high surface area, thermal stability and porous surface [17,18]. Commercially available activated carbon and carbon nanotubes (CNTs) have already been applied as scaffold materials for a variety of metal-based catalysts including copper [19,20,21,22,23].
A significant interest has been directed to the application of transition metal complexes based on the neutral, water-soluble and air-stable 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo [3.3.1] nonane (DAPTA) ligand in aqueous medium catalysis [24]. In this context, our group has reported the set of copper(I)-DAPTA complexes [CuBr(κP-DAPTA)3] (1), [CuI(κP-DAPTA)3] (2), [Cu(μ-Br)(κP-DAPTA)2]2 (3) and [Cu(μ-I)(κP-DAPTA)2]2 (4) (Scheme 1) that demonstrated to be efficient homogeneous catalysts for the microwave-assisted CuAAC reaction [25]. The use of microwave heating, as compared to conventional methods, has been shown to dramatically reduce reaction times, increase product yields and enhance product purity by reducing unwanted side reactions [26,27,28,29]. In continuation of our efforts to develop efficient catalytic CuAAC systems [25,30,31,32] compounds 1–4 were heterogenized in carbon materials (AC and CNT) and utilized as heterogeneous catalysts for the microwave-assisted synthesis of triazoles. The catalytic potential of the supported species are compared with the previously studied homogeneous counterparts [25].

2. Results and Discussion

2.1. Characterization of the Carbon Materials

The carbon materials used were the commercially purchased AC and CNT. They were subjected to chemical treatments in order to modify the nature and concentration of the surface functional groups. Surface modification was done by nitric acid treatment, by the addition of 5 M HNO3 and reflux, to give the oxidized AC-ox and CNT-ox materials. These could subsequently be treated with 20 mM NaOH under reflux to produce the AC-ox-Na and CNT-ox-Na carbon supports.
Table 1 shows the BET surface area, pore volume, and pore size of the commercial AC and CNT materials and their treated forms AC-ox, CNT-ox, AC-ox-Na and CNT-ox-Na. Indeed, the treatments have made significant structural modifications to the carbon materials [10,33,34,35,36,37]. In the case of AC there was a significant decrease of the surface area, pore volume and pore size. Nitric acid treatment has been proved to be effective for the creation of surface oxygen-containing functionalities such as carboxylic groups which could inhibit the access of N2 to the micropores [10,33]. The subsequent NaOH treatment (AC-ox-Na) further reduced the surface area of the material. For CNTs, having a cylindrical structure and the pores result from the free space in the bundles, and the acid treatment opens the CNT end tips (as seen for CNT-ox). Surface oxygen functionalities such as carboxylic groups can be introduced on the outer and possibly the inner walls which result in the formation of edges and steps on the graphene sheets [9,38]. The oxidant effectively opened the carbon nanotubes, and aggregation of the individual CNTs results in a lower value of pore volume and size than in the untreated sample [10,39,40]. Subsequent NaOH treatment (to achieve CNT-ox-Na) appeared not to revert the effect since the essential features were still present at the end of the treatment.

2.2. Heterogenization Efficiency

The copper compounds 1–4 were heterogenized on the six carbon materials in attempts to obtain ~2% Cu. The surface treatments were proved to provide significant structural modifications on the carbon supports and to enhance the immobilization process. Anchoring of the metal-containing species to the carbon materials was done by the wet impregnation method, whereby a solution containing the precursor of the active phase (the copper complex) is contacted with the solid support. The suspension was continuously stirred for 24 h, after which the solid was separated by filtration and dried to remove the absorbed solvent.
As shown in Table 2, the different treatments affect the porous structure and surface chemistry of the supports, but the obtained materials were able to anchor the Cu complexes, although with different efficiencies. Heterogenization of the complexes was better observed in the ox-Na supports, followed by the -ox and the least effective were the original materials. This suggests that the increase in the number of surface groups brought by the treatments acts as a scaffold that increases the capacity of the complex to anchor effectively. The formation of phenolate and carboxylate groups obtained with the -ox-Na treatment can probably explain the higher heterogenization levels considering that these groups might act as coordination sites for the copper complexes [11,14]. Possible coordination and other interacting modes of Cu(I)-phosphine complexes onto the carbon materials are shown in Figures S10–S13. They can involve replacement of the halo (X) ligand by a carboxylate or phenolate group of the carbon matrix (Figure S10), addition of one of these groups to the Cu atom (Figure S11), or a non-covalent interaction such as H-bonding (Figure S12) or ionic interaction (Figure S13).
The nature of the surface groups and the immobilization of the copper complexes were further investigated using FTIR spectroscopy. Figures S7–S9 show the corresponding FTIR spectra of the CNT-ox-Na support and the heterogenized complexes 2 and 4, respectively. The presence of the peak at ~1720 cm−1 is related to C=O carboxylate group vibrations from the HNO3 treatment to increase the functionalization of the nanotubes. These functional groups are usually found attached to the ends of the nanotubes due to the enhanced reactivity of these areas [41]. By comparing the FTIR spectra before and after heterogenization, an observed shift in the peak of the carbonyl group from 1631 cm−1 to 1613 and 1618 cm−1 could be related to the chemical bond formed between the carboxylate group and Cu+ [42,43]. The peak at ~1400–1450 cm−1, present in the heterogenized samples but not on the support, suggests that there is O–H bending deformation in carboxylic and phenolic groups while the peak at ~1160–1200 cm−1 may be associated with the C–O stretching in the same functionalities [44]. Hence, these observations may indicate that the Cu(I)-phosphine complex is immobilized on CNT-ox-Na support via interactions between the terminal carboxylate groups on the surface of CNT-ox-Na.
The main advantages of the immobilization technique include the absence of any complication in the heterogenization process, the widespread availability of carbon materials, the lack of any tedious procedure to alter the catalyst to facilitate the immobilization, the rapidity and experimental simplicity of the methodology by which heterogenization can be completed.

2.3. Microwave-Assisted One-Pot Synthesis of 1,2,3-Triazoles

To exploit the activity of the Cu complexes 1–4 immobilized on the different carbon materials, the solid systems were used as catalysts for the one-pot synthesis of 1,4-disubstituted-1,2,3-triazoles.
The reaction of benzyl bromide, sodium azide and phenylacetylene was chosen as model (Table 3). The heterogenized materials with 1.2–1.6% Cu loadings (see Table 2) were tested as catalysts for this reaction. The initial experimental conditions included a catalyst loading of 0.5% (relative to benzyl bromide), the temperature of 80 °C, 1.5 mL of H2O:MeCN 1:1 solvent mixture, 30 W microwave (MW) irradiation and a reaction time of 15 min (Table 3, entries 1–8). Raising the temperature to the previously chosen value of 125 °C for the homogeneous systems [25] did not significantly improve the results (Table 3, entries 9–14). Different reaction times, catalyst loadings, and volumes of solvent were then screened to determine the optimum reaction conditions (Table 3, entries 15–24).
The product was isolated by extraction with ethyl acetate followed by solvent removal to obtain the solid product. Structural assignments were determined by comparing the 1H- and 13C NMR spectra of the obtained triazole with those reported previously. In particular, the resonance of the proton in the 5-position of the 1,2,3-triazole ring as shown in the 1H NMR spectrum perfectly agrees with literature data [25,42] (see the Supporting Information for details).
According to the data given in Table 3, the catalysts bearing the mononuclear complexes 1 and 2 are more active than those containing the dinuclear compounds 3 and 4 when immobilized on AC-ox-Na support (Table 1, entries 1–4). The substantially lower BET surface area and micropore volume of AC-ox-Na materials in comparison with the others and the bulkiness of the dinuclear compounds could have been possible causes of inaccessibility of the reactants to the active centers resulting in the decreased yields obtained from complexes 3 and 4 on the AC-ox-Na support. However, when the complexes 1–4 were immobilized on the CNT-ox-Na support, those bearing the iodo ligand (2 and 4) gave higher product yields regardless of their nuclearity (Table 1, entries 5–8). A plausible justification concerns the higher metal loading of complexes 2 and 4 on the CNT-ox-Na support (shown in Table 2) which eventually can result from a higher lability of the Cu-I bond (than that of Cu-Br) which would be favorable to the immobilization of the catalyst on this support or to the accessibility of the reagents to the metal centers upon iodo-ligand displacement. A related finding was observed with NHC-complexes [(NHC)CuX] (NHC = N-heterocyclic carbene; X = Cl, Br, I), as catalysts for CuAAC reaction with the general trend iodine> bromine> chlorine [45]. This can be accounted for by the formation, in the catalytic cycle, of copper-acetylide and -acetylide-azide intermediate species that requires the replacement of labile co-ligands [46].
Among the carbon materials used as support, the CNT-Ox-Na (Table 3, entries 6 and 8) gave the most satisfactory yields. Regardless of the type of carbon support being used for 2 (Table 3, entries 2 and 6) the yields (31.4% and 41%) and TONs (63 and 82) are higher than those obtained homogeneously (26% and TON of 52) [25] under identical experimental conditions.
Significant effects of attaching the catalytic complex to a solid support include confinement, site-isolation, prevention of dimerization, cooperative effect of support, among others [47]. The presence of phenolate and carboxylate surface groups, due to the -ox-Na treatment, might explain the increased conversion since these moieties act as a scaffold for the complexes to anchor effectively [9,10,11,12,13,14].
The CNT materials gave the most satisfactory yields among the supports. Possible reasons might be due to the nature and concentration of surface functional groups, the absence of porosity for easy access to the active centers by the reactants, or an electronic effect caused by the graphitic structure of CNT that can lead to enhanced interactions with the reactants or intermediate radicals [9,14].
Since the CNT-ox-Na anchored complexes 2 and 4 (hereafter denoted as 2_CNT-ox-Na and 4_CNT-ox-Na) gave the highest yields for the CuAAC reaction under the initial experimental conditions (Table 3, entries 6 and 8), they were further used to explore the effect of variation of other experimental factors i.e., catalyst loading, irradiation time, and total volume of solvent. In the case of 2_CNT-ox-Na, an increase in both the total volume of solvent and irradiation time (Table 3, entry 18) dropped the yield to 27%. A drop in yield to 21% or to 17% was observed when the catalyst loading or the solvent volume was decreased (Table 3, entries 16 and 19, respectively). The solvent effect in the reaction yield may be tentatively explained by substrate-solvent interactions and concentration effects. Decreasing the solvent volume to 1.0 mL gave a poor yield possibly due to the low solubility of the reactants with partial precipitation, while increasing to 2.0 mL would dilute the reaction mixture and eventually hinder the interaction between substrates, with a decrease in the kinetics of the reaction. With 4_CNT-ox-Na, the yield significantly improved to 42% when the irradiation time was increased to 60 min (Table 3, entry 23), and to 48% when the catalyst loading was set to 1.0 mol% (Table 3, entry 24). Further increases of catalyst loading were not explored since it would defeat the TON values and the purpose of doing away with stoichiometric excess of expensive catalysts, which is one of the main fundamentals of heterogenization.
To investigate the generality and versatility of 2_CNT-ox-Na and 4_CNT-ox-Na as catalysts for the CuAAC reaction to furnish the triazole derivatives, we explored the effect of substituted benzyl bromides using the aforementioned optimized experimental conditions (Table 3, entries 6 and 23). The results are shown in Table 4.
The effect of the benzyl substituents on the yield of the reaction depended on the catalyst. With 2_CNT-ox-Na the use of 2-bromobenzyl bromide instead of the non-substituted aromatic substrate decreased the yield of the corresponding triazole product (compare entry 1 in Table 4 with entry 6 in Table 3). However, when nitrobenzyl bromides were used, the yields increased regardless of the substituent position (ortho or meta) in the aromatic ring (Table 4, entries 2–3). The opposite was observed for catalyst 4_CNT-ox-Na (Table 4, entries 4–8): when 2-bromobenzyl bromide was used the yield increased from 48% (Table 3, entry 22) to 51% (Table 4, entry 4), but with 3-bromobenzyl bromide it decreased to 37% (Table 4, entry 5); with the nitro group, a stronger electron-withdrawing moiety, the obtained yields of product dropped with a decreasing trend conceivably following the ortho > meta > para group position (Table 4, entries 6–8). Further details on the characterization of compounds can be found in the Supporting Information.
The 1,3-dipolar cycloaddition is a well-known reaction that can be catalyzed by heterogeneous copper metal such as copper nanoparticles, nanoclusters, or copper wire [7]. Carbon nanomaterials with immobilized copper complexes based on N-heterocyclic carbenes (NHC) have been reported as recyclable catalysts for CuAAC reactions by Nia et al. [48]. Specifically, Cu(I) nanoparticles immobilized on CNT only achieved a 30% conversion with 2–5 mol% catalyst loading at 40 °C for 96 h. Yields improved to 60% with an 8 mol% catalyst loading for 24 h reaction time. Nasrollahzadeh et al. [49] prepared a heterogeneous catalyst consisting of copper nanoparticles on amorphous carbon to be used for the click reaction to synthesize 1,2,3-triazoles. Despite the long reaction time of 4 h, the best result gave the product with a yield of 97%, obtained with 1.0 mmol of starting materials with a catalyst loading of 0.5 mol% at 70 °C. Hosseinzadeh et al. [50] employed Cu(OAc)2/MCM-41 (Mobil Composition of Matter No.41) catalyst for the one-pot synthesis of 1,2,3-triazoles in water. The optimum product yield of 98% was achieved at 90 °C for 15 min. Yet, the need for 45 mol% sodium ascorbate as reducing agent for Cu(II) to Cu(I) makes it an unattractive procedure. Shargi et al. [42] attempted to immobilize copper nanoparticles on charcoal for the multicomponent catalytic synthesis of 1,2,3-triazole derivatives. The use of 1 mol% of Cu/C in water as catalyst for the CuAAC reaction, furnished the 1,4-disubstituted triazole product in 91% yield after stirring for 45 min at 100 °C. Although the catalyst loading was low, the metal loading used for Cu/C was found to contain ~10% (w/w) of Cu based on ICP analysis [42].
Despite the numerous publications on the heterogeneous copper-catalyzed azide-alkyne coupling reaction, the carbon-supported Cu-DAPTA complexes with a copper loading of only 1.5–1.6% immobilized on the carbon materials were able to establish quantitative conversions, which were obtained at a shorter reaction time of 15 min, a lower temperature of 80 °C, a lower catalyst loading of 0.5 mol%, and no additional reducing agent.
A proposed mechanism for the CuAAC reaction is depicted in Scheme 2, based on several studies that have been reported toward its elucidation [51,52]. Subsequent kinetic experiments [53] and theoretical investigations [54,55] have been carried out leading basically to similar qualitative conclusions that reflect the up-to-date understanding of this reaction. In the first step of the mechanism, a terminal alkyne binds to a copper(I) center as a π-ligand. This coordination increases the acidity of the alkyne terminal proton, hence a stable σ,π-di(copper) acetylide complex can be formed upon deprotonation [31,56]. The reaction of azide replaces one of the ligands and binds reversibly to the copper atom via the nitrogen proximal to carbon, forming a bridging dicopper µ-acetylide intermediate [53,57]. Subsequently, the distal nitrogen of the azide attacks the C-2 carbon of the acetylide forming an intermediate six-membered cupracycle [58]. The next step involves reductive ring contraction to afford the triazolide intermediate. The last step corresponds to a fast protonation of the copper(I) triazolide leading to the release of the triazole product and the active copper species catalyst is regenerated, thereby completing the catalytic cycle.
By attaching the catalytic complex to a solid support, it is possible to efficiently recover the catalyst to be used for further catalytic cycles. The recyclabilities of 2_CNT-ox-Na and 4_CNT-ox-Na were explored for up to 4 consecutive cycles (Figure 1 and Figure 2). On completion of each stage, the triazole product was analyzed and the heterogenized solid catalyst was recovered by filtration, washed thoroughly with distilled water, and dried overnight. The subsequent cycle was initiated upon the addition of new standard portions of all other reagents. As shown in Figure 1 and Figure 2, the yields and corresponding TON values decrease in each successive cycle, conceivably due to leaching of the catalyst from the support. Indeed, the triazole functionality of the product of the azide-alkyne click reaction has a strong complexing ability for Cu catalyst and can compete with the solid support. Hence, this release-recapture reaction mechanism could invoke some leaching and explain the decrease in the yield [7].
The 2_CNT-ox-Na recyclability is limited but still represents a considerable progress in view of the ca.19% yield obtained after the 4th cycle, as compared to only a value of 5.1% yield achieved after the 4th recycling process of complex 2 working homogeneously as a catalyst for the CuAAC reaction [25].

3. Materials and Methods

3.1. General Procedures

All procedures were performed in air. Reagents and solvents were obtained from commercial sources and used without further purification. Infrared spectra (4000–400 cm−1) were recorded on a Vertex 70 (Bruker) instrument in KBr pellets. 1H, 13C and DEPT NMR spectra were obtained using Bruker Avance II 300 MHz and 400 MHz spectrometers at ambient temperature. The chemical shifts were reported in ppm using tetramethylsilane as an internal reference. Electrospray mass (ESI-MS) spectra were obtained on a Varian 500-MS LC Ion Trap Mass Spectrometer equipped with an electrospray ion source. The compounds were observed and reported in the positive mode (capillary voltage = 80–105 V). The microwave irradiation was done using the Anton Paar Monowave 300 microwave reactor. The loading of Cu on the carbon materials was determined by Inductively Coupled Plasma (ICP) at the Laboratório de Análises of Instituto Superior Técnico. The carbon materials were characterized by N2 adsorption at 77 K in Micrometrics ASAP 2060 gas sorption instrument. Materials were previously degassed at 150 °C for 48 h. The multi-point Brunauer–Emmett–Teller (BET) theory and the t-plot method procedure were used for estimating the total and the external surface areas of the materials. The complexes [CuBr(κP-DAPTA)3] (1), [CuI(κP-DAPTA)3] (2), [Cu(μ-Br)(κP-DAPTA)2]2 (3) and [Cu(μ-I)(κP-DAPTA)2]2 (4) were prepared according to the literature methods [25].

3.2. Treatments of the Carbon Materials

Two different carbon materials were employed as starting supporting matrices, activated carbon (AC) and multi-walled carbon nanotubes (CNT), used as such or subjected to surface treatments. These included oxidation by refluxing for 3 h 1 g of carbon in 75 mL of a 5 M HNO3 solution, followed by filtration and washing with distilled water until neutral pH [9,11,12,37,59,60] in this way, the AC-ox and CNT-ox supports were obtained. When AC-ox or CNT-ox were mixed with 75 mL of a 20 mM NaOH solution, refluxed for 1 h followed by filtration and washing with distilled water until neutral pH [10,11,12,13,37,47,59,60,61], the set of AC-ox-Na and CNT-ox-Na supports were attained. In this way, a total of six different carbon materials were used in the work.

3.3. Heterogenization Protocol

Immobilization of complexes 1–4 on the carbon supports was carried out by dissolving a calculated amount of each complex in 20 mL of a 1:1 (v/v) H2O:MeCN solvent mixture and, subsequently, 0.15 g of the carbon material were added so as to achieve 2 wt% Cu per mass of carbon. The mixture was stirred continuously for 24h and then filtered, washed with water, and dried overnight at 120 °C.

3.4. Catalytic Essays

In a typical procedure, a tightly capped 10 mL borosilicate glass vial equipped with a magnetic stir bar and containing the heterogenized catalysts (0.5 mol% relative to benzyl bromide), benzyl bromide (0.30 mmol), phenylacetylene (0.33 mmol), and NaN3 (0.33 mmol, 0.0215 g) in 1.5 mL of the solvent mixture (H2O:MeCN, 1:1 v/v), was placed in a microwave reactor. This was stirred (600 rpm) and simultaneously irradiated (30 W) for 15 min at 80 °C. After the set reaction time, the mixture was allowed to cool at room temperature and two phases were observed. After extraction with ethyl acetate, the organic phase was collected and taken to dryness to afford the corresponding triazole product; it was washed with petroleum ether and no further purification step was performed. The heterogenized catalyst was separated by filtration, washed with water, oven-dried, and reused as suitable.

4. Conclusions

A simple and reproducible synthetic method for recyclable heterogeneous catalysts based on Cu(I)-DAPTA complexes (1–4) on carbon materials (AC and CNT) was developed. The carbon nanotubes treated with nitric acid and NaOH (CNT-ox-Na) provided the most effective support concerning heterogenization. The treatments with HNO3 and NaOH have modified the nature and concentration of surface functional groups of the carbon solid support. The total surface area of all materials was reduced by NaOH treatment and the surface modification brought by ox-Na surface oxidation was favorable in terms of catalytic activity.
It is noteworthy that all the reactions were done without using an inert atmosphere. The immobilized iodo-Cu(I)-DAPTA complexes 2 and 4 on CNT-ox-Na affording the 2_CNT-ox-Na and 4_CNT-ox-Na supports have shown particularly favorable catalytic activity for the multicomponent synthesis of 1,2,3-triazoles, which can eventually relate to a higher lability of the Cu-I bond. The conditions and yields of the heterogenized systems with a copper loading of only 1.5–1.6% (w/w) concern a promising route to establish quantitative conversions obtained at 15 min, 80 °C, 0.5 mol% catalyst loading. Furthermore, the process avoids the isolation of organic azides and affords the products without tedious purification steps. The 2_CNT-ox-Na and 4_CNT-ox-Na can be recovered and recycled by simple filtration of the reaction solution and reused for up to four consecutive cycles.

Supplementary Materials

The following are available online at https://www.mdpi.com/2073-4344/11/2/185/s1, Characterization NMR data and spectra of the triazoles, Figure S1: ESI-MS+ spectrum of 1-benzyl-4-phenyl-1H-1,2,3-triazole, Figure S2: ESI-MS+ spectrum of bromobenzyl-4-phenyl-1H-1,2,3-triazole, Figure S3: ESI-MS+ spectrum of nitrobenzyl-4-phenyl-1H-1,2,3-triazole, Figure S4: FTIR spectrum of 1-benzyl-4-phenyl-1H-1,2,3-triazole, Figure S5: FTIR spectrum of bromobenzyl-4-phenyl-1H-1,2,3-triazole, Figure S6: FTIR spectrum of nitrobenzyl-4-phenyl-1H-1,2,3-triazole, Figure S7: FTIR spectrum of CNT-ox-Na support (2000-400 cm−1), Figure S8: FTIR spectrum of 2_CNT-ox-Na (2000-400 cm-1), Figure S9: FTIR spectrum of 4_CNT-ox-Na (2000-400 cm−1), Figure S10: Coordination at the Cu centre through a carboxylate group upon replacement of an iodo ligand, Figure S11: Coordination at the Cu centre through a carboxylate or a phenolate group, Figure S12: Via hydrogen bonding from a carboxylic or a phenolic group, Figure S13: Via ionic interactions.

Author Contributions

Conceptualization, A.G.M., S.A.C.C. and M.F.C.G.d.S.; methodology, I.L.L., A.G.M., S.A.C.C. and M.F.C.G.d.S.; validation, M.F.C.G.d.S., C.F.G.C.G. and A.J.L.P.; formal analysis, I.L.L. and A.G.M.; investigation, I.L.L., A.G.M. and S.A.C.C.; resources, M.F.C.G.d.S. and C.F.G.C.G.; data curation, I.L.L.; writing—original draft preparation, I.L.L., A.G.M. and S.A.C.C.; writing—review and editing, M.F.C.G.d.S., C.F.G.C.G. and A.J.L.P.; visualization, I.L.L., S.A.C.C., M.F.C.G.d.S. and A.J.L.P.; supervision, S.A.C.C., M.F.C.G.d.S., C.F.G.C.G. and A.J.L.P.; project administration, S.A.C.C. and A.J.L.P.; funding acquisition, S.A.C.C. and A.J.L.P. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by Fundação para a Ciência e a Tecnologia (FCT), Portugal, through project UIDB/00100/2020 of the Centro de Química Estrutural. It was also funded by national funds though FCT, under the Scientific Employment Stimulus-Institutional Call (CEECINST/00102/2018). We also acknowledge the Associate Laboratory for Green Chemistry—LAQV financed by national funds from FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020). I.L.L. is grateful to the CATSUS Ph.D. Program for her grant (PD/BD 135555/2018). AGM is grateful to Instituto Superior Técnico, Portugal for his post-doctoral fellowship through the project CO2usE-1801P.00867.1.01 (Contract No. IST-ID/263/2019). It was also supported by the RUDN University Strategic Academic Leadership Program.

Acknowledgments

The authors acknowledge the Portuguese NMR Network (IST-UL Centre) for access to the NMR facility and the IST Node of the Portuguese Network of Mass-spectrometry for the ESI-MS measurements. The authors are also grateful to the support of RUDN University Strategic Academic Leadership Program.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Dheer, D.; Singh, V.; Shankar, R. Medicinal attributes of 1,2,3-triazoles: Current developments. Bioorg. Chem. 2017, 71, 30–54. [Google Scholar] [CrossRef] [PubMed]
  2. Victoria Gil, M.; José Arévalo, M.; López, Ó. Click chemistry-what’s in a name? Triazole synthesis and beyond. Synthesis (Stuttg). 2007, 1589–1620. [Google Scholar] [CrossRef]
  3. Tornøe, C.W.; Christensen, C.; Meldal, M. Peptidotriazoles on Solid Phase: [1,2,3]-Triazoles by Regiospecific Copper(I)-Catalyzed 1,3-Dipolar Cycloadditions of Terminal Alkynes to Azides. J. Org. Chem. 2002, 67, 3057–3064. [Google Scholar] [CrossRef] [PubMed]
  4. Rostovtsev, V.V.; Green, L.G.; Fokin, V.V.; Sharpless, K.B. A Stepwise Huisgen Cycloaddition Process: Copper(I)-Catalyzed Regioselective “Ligation” of Azides and Terminal Alkynes. Angew. Chemie 2002, 114, 2708–2711. [Google Scholar] [CrossRef]
  5. Díez-González, S. Well-defined copper(i) complexes for Click azide–alkyne cycloaddition reactions: One Click beyond. Catal. Sci. Technol. 2011, 1, 166–178. [Google Scholar] [CrossRef] [Green Version]
  6. Hein, J.E.; Fokin, V.V. Copper-catalyzed azide–alkyne cycloaddition (CuAAC) and beyond: New reactivity of copper(i) acetylides. Chem. Soc. Rev. 2010, 39, 1302–1315. [Google Scholar] [CrossRef]
  7. Dervaux, B.; Du Prez, F.E. Heterogeneous azide-alkyne click chemistry: Towards metal-free end products. Chem. Sci. 2012, 3, 959–966. [Google Scholar] [CrossRef]
  8. Chassaing, S.; Bénéteau, V.; Pale, P. When CuAAC “Click Chemistry” goes heterogeneous. Catal. Sci. Technol. 2016, 6, 923–957. [Google Scholar] [CrossRef]
  9. De Almeida, M.P.; Martins, L.M.D.R.S.; Carabineiro, S.A.C.; Lauterbach, T.; Rominger, F.; Hashmi, A.S.K.; Pombeiro, A.J.L.; Figueiredo, J.L. Homogeneous and heterogenised new gold C-scorpionate complexes as catalysts for cyclohexane oxidation. Catal. Sci. Technol. 2013, 3, 3056–3069. [Google Scholar] [CrossRef] [Green Version]
  10. Martins, L.M.D.R.S.; De Almeida, M.P.; Carabineiro, S.A.C.; Figueiredo, J.L.; Pombeiro, A.J.L. Heterogenisation of a C-scorpionate FeII complex on carbon materials for cyclohexane oxidation with hydrogen peroxide. ChemCatChem 2013, 5, 3847–3856. [Google Scholar] [CrossRef]
  11. Sutradhar, M.; Martins, L.M.D.R.S.; Carabineiro, S.A.C.; Guedes da Silva, M.F.C.; Buijnsters, J.G.; Figueiredo, J.L.; Pombeiro, A.J.L. Oxidovanadium(V) Complexes Anchored on Carbon Materials as Catalysts for the Oxidation of 1-Phenylethanol. ChemCatChem 2016, 8, 2254–2266. [Google Scholar] [CrossRef]
  12. Martins, L.M.D.R.S.; Ribeiro, A.P.C.; Carabineiro, S.A.C.; Figueiredo, J.L.; Pombeiro, A.J.L. Highly efficient and reusable CNT supported iron(ii) catalyst for microwave assisted alcohol oxidation. Dalton Trans. 2016, 45, 6816–6819. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  13. Wang, J.; Martins, L.M.D.R.S.; Ribeiro, A.P.C.; Carabineiro, S.A.C.; Figueiredo, J.L.; Pombeiro, A.J.L. Supported C-Scorpionate Vanadium(IV) Complexes as Reusable Catalysts for Xylene Oxidation. Chem. An Asian J. 2017, 12, 1915–1919. [Google Scholar] [CrossRef] [PubMed]
  14. Carabineiro, S.A.C.; Martins, L.M.D.R.S.; Pombeiro, A.J.L.; Figueiredo, J.L. Commercial Gold(I) and Gold(III) Compounds Supported on Carbon Materials as Greener Catalysts for the Oxidation of Alkanes and Alcohols. ChemCatChem 2018, 10, 1804–1813. [Google Scholar] [CrossRef]
  15. Nasrollahzadeh, M.; Mohammad Sajadi, S.; Rostami-Vartooni, A.; Khalaj, M. Green synthesis of Pd/Fe3O4 nanoparticles using Euphorbia condylocarpa M. bieb root extract and their catalytic applications as magnetically recoverable and stable recyclable catalysts for the phosphine-free Sonogashira and Suzuki coupling reactions. J. Mol. Catal. A Chem. 2015, 396, 31–39. [Google Scholar] [CrossRef]
  16. Fakhri, P.; Jaleh, B.; Nasrollahzadeh, M. Synthesis and characterization of copper nanoparticles supported on reduced graphene oxide as a highly active and recyclable catalyst for the synthesis of formamides and primary amines. J. Mol. Catal. A Chem. 2014, 383–384, 17–22. [Google Scholar] [CrossRef]
  17. Figueiredo, J.L. Functionalization of porous carbons for catalytic applications. J. Mater. Chem. A 2013, 1, 9351–9364. [Google Scholar] [CrossRef]
  18. Figueiredo, J.L.; Pereira, M.F.R. Synthesis and functionalization of carbon xerogels to be used as supports for fuel cell catalysts. J. Energy Chem. 2013, 22, 195–201. [Google Scholar] [CrossRef]
  19. Alonso, F.; Moglie, Y.; Radivoy, G.; Yus, M. Multicomponent synthesis of 1,2,3-triazoles in water catalyzed by copper nanoparticles on activated carbon. Adv. Synth. Catal. 2010, 352, 3208–3214. [Google Scholar] [CrossRef] [Green Version]
  20. Sharghi, H.; Beyzavi, M.H.; Safavi, A.; Doroodmand, M.M.; Khalifeh, R. Immobilization of porphyrinatocopper nanoparticles onto activated multi-walled carbon nanotubes and a study of its catalytic activity as an efficient heterogeneous catalyst for a click approach to the three-component synthesis of 1,2,3-triazoles in water. Adv. Synth. Catal. 2009, 351, 2391–2410. [Google Scholar] [CrossRef]
  21. Silva, A.R.; Figueiredo, J.L.; Freire, C.; De Castro, B. Copper(II) acetylacetonate anchored onto an activated carbon as a heterogeneous catalyst for the aziridination of styrene. Catalysis Today 2005, 102–103, 154–159. [Google Scholar] [CrossRef]
  22. Silva, A.R.; Freitas, M.M.A.; Freire, C.; De Castro, B.; Figueiredo, J.L. Heterogenization of a functionalized copper(II) Schiff base complex by direct immobilization onto an oxidized activated carbon. Langmuir 2002, 18, 8017–8024. [Google Scholar] [CrossRef]
  23. Silva, A.R.; Martins, M.; Freitas, M.M.A.; Figueiredo, J.L.; Freire, C.; de Castro, B. Anchoring of Copper(II) Acetylacetonate onto an Activated Carbon Functionalised with a Triamine. Eur. J. Inorg. Chem. 2004, 2004, 2027–2035. [Google Scholar] [CrossRef]
  24. Mahmoud, A.G.; Guedes da Silva, M.F.C.; Pombeiro, A.J.L. 3,7-Diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA) and derivatives: Coordination chemistry and applications. Coord. Chem. Rev. 2020, 213614. [Google Scholar] [CrossRef]
  25. Mahmoud, A.G.; Guedes da Silva, M.F.C.; Sokolnicki, J.; Smoleński, P.; Pombeiro, A.J.L. Hydrosoluble Cu(I)-DAPTA complexes: Synthesis, characterization, luminescence thermochromism and catalytic activity for microwave-assisted three-component azide-alkyne cycloaddition click reaction. Dalton Trans. 2018, 47, 7290–7299. [Google Scholar] [CrossRef]
  26. Kappe, C.O. Microwave dielectric heating in synthetic organic chemistry. Chem. Soc. Rev. 2008, 37, 1127–1139. [Google Scholar] [CrossRef]
  27. Appukkuttan, P.; Dehaen, W.; Fokin, V.V.; Van der Eycken, E. A Microwave-Assisted Click Chemistry Synthesis of 1,4-Disubstituted 1,2,3-Triazoles via a Copper(I)-Catalyzed Three-Component Reaction. Org. Lett. 2004, 6, 4223–4225. [Google Scholar] [CrossRef]
  28. Özçubukçu, S.; Ozkal, E.; Jimeno, C.; Pericàs, M.A. A highly active catalyst for huisgen 1, 3-dipolar cycloadditions based on the tris(triazolyl)methanol-Cu(I) structure. Org. Lett. 2009, 11, 4680–4683. [Google Scholar] [CrossRef]
  29. Cintas, P.; Martina, K.; Robaldo, B.; Garella, D.; Boffa, L.; Cravotto, G. Improved Protocols for Microwave-Assisted Cu(I)-Catalyzed Huisgen 1,3-Dipolar Cycloadditions. Collect. Czechoslov. Chem. Commun. 2007, 72, 1014–1024. [Google Scholar] [CrossRef]
  30. Mahmoud, A.G.; Martins, L.M.D.R.S.; Guedes da Silva, M.F.C.; Pombeiro, A.J.L. Copper complexes bearing C-scorpionate ligands: Synthesis, characterization and catalytic activity for azide-alkyne cycloaddition in aqueous medium. Inorganica Chim. Acta 2018, 483, 371–378. [Google Scholar] [CrossRef]
  31. Mahmoud, A.G.; Guedes da Silva, M.F.C.; Mahmudov, K.T.; Pombeiro, A.J.L. Arylhydrazone ligands as Cu-protectors and -catalysis promoters in the azide–alkyne cycloaddition reaction. Dalton Trans. 2019, 48, 1774–1785. [Google Scholar] [CrossRef] [PubMed]
  32. Mahmoud, A.G.; Smolénski, P.; Guedes Da Silva, M.F.C.; Pombeiro, A.J.L. molecules Water-Soluble O-, S-and Se-Functionalized Cyclic Acetyl-triaza-phosphines. Synthesis, Characterization and Application in Catalytic Azide-alkyne Cycloaddition. Molecules 2020, 25, 5479. [Google Scholar] [CrossRef] [PubMed]
  33. Fuerte, A.; Iglesias, M.; Sánchez, F. New chiral diphosphinites: Synthesis of Rh complexes. Heterogenisation on zeolites. J. Organomet. Chem. 1999, 588, 186–194. [Google Scholar] [CrossRef]
  34. Benvenuti, F.; Carlini, C.; Raspolli Galletti, A.M.; Sbrana, G.; Marchionna, M.; Patrini, R. 1,3-Butadiene telomerization with methanol catalyzed by heterogenized palladium complexes. J. Mol. Catal. A Chem. 1999, 137, 49–63. [Google Scholar] [CrossRef]
  35. Gerber, I.; Oubenali, M.; Bacsa, R.; Durand, J.; Gonçalves, A.; Pereira, M.F.R.; Jolibois, F.; Perrin, L.; Poteau, R.; Serp, P. Theoretical and Experimental Studies on the Carbon-Nanotube Surface Oxidation by Nitric Acid: Interplay between Functionalization and Vacancy Enlargement. Chem. A Eur. J. 2011, 17, 11467–11477. [Google Scholar] [CrossRef]
  36. Figueiredo, J.L.; Pereira, M.F.R.; Freitas, M.M.A.; Órfão, J.J.M. Modification of the surface chemistry of activated carbons. Carbon N. Y. 1999, 37, 1379–1389. [Google Scholar] [CrossRef]
  37. Mahata, N.; Pereira, M.F.R.; Suárez-García, F.; Martínez-Alonso, A.; Tascón, J.M.D.; Figueiredo, J.L. Tuning of texture and surface chemistry of carbon xerogels. J. Colloid Interface Sci. 2008, 324, 150–155. [Google Scholar] [CrossRef]
  38. Serp, P.; Corrias, M.; Kalck, P. Carbon nanotubes and nanofibers in catalysis. Appl. Catal. A Gen. 2003, 253, 337–358. [Google Scholar] [CrossRef]
  39. Martínez, M.T.; Callejas, M.A.; Benito, A.M.; Cochet, M.; Seeger, T.; Ansón, A.; Schreiber, J.; Gordon, C.; Marhic, C.; Chauvet, O.; et al. Sensitivity of single wall carbon nanotubes to oxidative processing: Structural modification, intercalation and functionalisation. Carbon N. Y. 2003, 41, 2247–2256. [Google Scholar] [CrossRef]
  40. Romanos, G.E.; Likodimos, V.; Marques, R.R.N.; Steriotis, T.A.; Papageorgiou, S.K.; Faria, J.L.; Figueiredo, J.L.; Silva, A.M.T.; Falaras, P. Controlling and quantifying oxygen functionalities on hydrothermally and thermally treated single-wall carbon nanotubes. J. Phys. Chem. C 2011, 115, 8534–8546. [Google Scholar] [CrossRef]
  41. Barros, E.B.; Filho, A.G.S.; Lemos, V.; Filho, J.M.; Fagan, S.B.; Herbst, M.H.; Rosolen, J.M.; Luengo, C.A.; Huber, J.G. Charge transfer effects in acid treated single-wall carbon nanotubes. Carbon N. Y. 2005, 43, 2495–2500. [Google Scholar] [CrossRef]
  42. Sharghi, H.; Khalifeh, R.; Doroodmand, M.M. Copper nanoparticles on charcoal for multicomponent catalytic synthesis of 1,2,3-triazole derivatives from benzyl halides or alkyl halides, terminal alkynes and sodium azide in water as a “green” solvent. Adv. Synth. Catal. 2009, 351, 207–218. [Google Scholar] [CrossRef]
  43. Samim, M.; Kaushik, N.K.; Maitra, A. Effect of size of copper nanoparticles on its catalytic behaviour in Ullman reaction. Bull. Mater. Sci. 2007, 30, 535–540. [Google Scholar] [CrossRef]
  44. Shaffer, M.S.P.; Fan, X.; Windle, A.H. Dispersion and packing of carbon nanotubes. Carbon N. Y. 1998, 36, 1603–1612. [Google Scholar] [CrossRef]
  45. Díez-González, S.; Escudero-Adán, E.C.; Benet-Buchholz, J.; Stevens, E.D.; Slawin, A.M.Z.; Nolan, S.P. [(NHC)CuX] complexes: Synthesis, characterization and catalytic activities in reduction reactions and Click Chemistry. On the advantage of using well-defined catalytic systems. Dalton Trans. 2010, 39, 7595–7606. [Google Scholar] [CrossRef]
  46. Bock, V.D.; Hiemstra, H.; Van Maarseveen, J.H. Cu I-catalyzed alkyne-azide “click” cycloadditions from a mechanistic and synthetic perspective. European J. Org. Chem. 2006, 51–68. [Google Scholar] [CrossRef]
  47. Choong, E.S. Immobilisation of chiral catalysts: Easy recycling of catalyst and improvement of catalytic efficiencies. Annu. Reports Prog. Chem. Sect. C 2005, 101, 143–173. [Google Scholar] [CrossRef]
  48. Shaygan Nia, A.; Rana, S.; Döhler, D.; Jirsa, F.; Meister, A.; Guadagno, L.; Koslowski, E.; Bron, M.; Binder, W.H. Carbon-Supported Copper Nanomaterials: Recyclable Catalysts for Huisgen [3+2] Cycloaddition Reactions. Chem. A Eur. J. 2015, 21, 10763–10770. [Google Scholar] [CrossRef]
  49. Nasrollahzadeh, M.; Jaleh, B.; Fakhri, P.; Zahraei, A.; Ghadery, E. Synthesis and catalytic activity of carbon supported copper nanoparticles for the synthesis of aryl nitriles and 1,2,3-triazoles. RSC Adv. 2015, 5, 2785–2793. [Google Scholar] [CrossRef]
  50. Hosseinzadeh, R.; Sepehrian, H.; Shahrokhi, F. Preparation of Cu(OAc)2/MCM-41 catalyst and its application in the one-pot synthesis of 1,2,3-triazoles in water. Heteroat. Chem. 2012, 23, 415–421. [Google Scholar] [CrossRef]
  51. Himo, F.; Lovell, T.; Hilgraf, R.; Rostovtsev, V.V.; Noodleman, L.; Sharpless, K.B.; Fokin, V.V. Copper(I)-catalyzed synthesis of azoles. DFT study predicts unprecedented reactivity and intermediates. J. Am. Chem. Soc. 2005, 127, 210–216. [Google Scholar] [CrossRef] [PubMed]
  52. Rodionov, V.O.; Fokin, V.V.; Finn, M.G. Mechanism of the Ligand-Free CuI-Catalyzed Azide-Alkyne Cycloaddition Reaction. Angew. Chemie 2005, 117, 2250–2255. [Google Scholar] [CrossRef]
  53. Rodionov, V.O.; Presolski, S.I.; Díaz, D.D.; Fokin, V.V.; Finn, M.G. Ligand-accelerated Cu-catalyzed azide-alkyne cycloaddition: A mechanistic report. J. Am. Chem. Soc. 2007, 129, 12705–12712. [Google Scholar] [CrossRef] [PubMed]
  54. Straub, B.F. μ-Acetylide and μ-alkenylidene ligands in “click” triazole syntheses. Chem. Commun. 2007, 3868–3870. [Google Scholar] [CrossRef] [PubMed]
  55. Özen, C.; Tüzün, N.Ş. The mechanism of copper-catalyzed azide-alkyne cycloaddition reaction: A quantum mechanical investigation. J. Mol. Graph. Model. 2012, 34, 101–107. [Google Scholar] [CrossRef]
  56. Baxter, C.W.; Higgs, T.C.; Bailey, P.J.; Parsons, S.; McLachlan, F.; McPartlin, M.; Tasker, P.A. Copper(I) alkynyl clusters, [Cux+y(hfac)x(C≡CR) y], with Cu10-Cu12 cores. Chem. A Eur. J. 2006, 12, 6166–6174. [Google Scholar] [CrossRef]
  57. Ben El Ayouchia, H.; Bahsis, L.; Anane, H.; Domingo, L.R.; Stiriba, S.E. Understanding the mechanism and regioselectivity of the copper(i) catalyzed [3 + 2] cycloaddition reaction between azide and alkyne: A systematic DFT study. RSC Adv. 2018, 8, 7670–7678. [Google Scholar] [CrossRef] [Green Version]
  58. Berg, R.; Straub, B.F. Advancements in the mechanistic understanding of the copper-catalyzed azide-alkyne cycloaddition. Beilstein J. Org. Chem. 2013, 9, 2715–2750. [Google Scholar] [CrossRef] [Green Version]
  59. Ribeiro, A.P.C.; Martins, L.M.D.R.S.; Carabineiro, S.A.C.; Figueiredo, J.L.; Pombeiro, A.J.L. Gold Nanoparticles Deposited on Surface Modified Carbon Xerogels as Reusable Catalysts for Cyclohexane C-H Activation in the Presence of CO and Water. Molecules 2017, 22, 603. [Google Scholar] [CrossRef] [Green Version]
  60. Ribeiro, A.P.C.; Martins, L.M.D.R.S.; Carabineiro, S.A.C.; Figueiredo, J.L.; Pombeiro, A.J.L. Gold nanoparticles deposited on surface modified carbon materials as reusable catalysts for hydrocarboxylation of cyclohexane. Appl. Catal. A Gen. 2017, 547, 124–131. [Google Scholar] [CrossRef]
  61. Maia, F.; Mahata, N.; Jarrais, B.; Silva, A.R.; Pereira, M.F.R.; Freire, C.; Figueiredo, J.L. Jacobsen catalyst anchored onto modified carbon xerogel as enantioselective heterogeneous catalyst for alkene epoxidation. J. Mol. Catal. A Chem. 2009, 305, 135–141. [Google Scholar] [CrossRef]
Catalysts 11 00185 sch001 550
Scheme 1. Synthesis of Cu(I)-DAPTA complexes. Adapted from [25] with permission from The Royal Society of Chemistry.
Scheme 1. Synthesis of Cu(I)-DAPTA complexes. Adapted from [25] with permission from The Royal Society of Chemistry.
Catalysts 11 00185 sch001
Catalysts 11 00185 sch002 550
Scheme 2. Postulated mechanism of the Cu–AAC reaction.
Scheme 2. Postulated mechanism of the Cu–AAC reaction.
Catalysts 11 00185 sch002
Catalysts 11 00185 g001 550
Figure 1. Effect of catalyst recycling on the yield of the product for the MW-assisted synthesis of 1,2,3-triazole catalyzed by 2_CNT-ox-Na (■) and 4_CNT-ox-Na (■). Reaction conditions: 0.5 mol% of 2_CNT-ox-Na vs. benzyl bromide, 1.0 mol% of 4_CNT-ox-Na vs. benzyl bromide, 15 min, 30 W microwave irradiation, 80 °C.
Figure 1. Effect of catalyst recycling on the yield of the product for the MW-assisted synthesis of 1,2,3-triazole catalyzed by 2_CNT-ox-Na (■) and 4_CNT-ox-Na (■). Reaction conditions: 0.5 mol% of 2_CNT-ox-Na vs. benzyl bromide, 1.0 mol% of 4_CNT-ox-Na vs. benzyl bromide, 15 min, 30 W microwave irradiation, 80 °C.
Catalysts 11 00185 g001
Catalysts 11 00185 g002 550
Figure 2. Effect of catalyst recycling on the overall TON of the product for the MW-assisted synthesis of 1,2,3-triazole catalyzed by 2_CNT-ox-Na (■) and 4_CNT-ox-Na (■). Reaction conditions: 0.5 mol% of 2_CNT-ox-Na vs. benzyl bromide, 1.0 mol% of 4_CNT-ox-Na vs. benzyl bromide, 15 min, 30 W microwave irradiation, 80 °C.
Figure 2. Effect of catalyst recycling on the overall TON of the product for the MW-assisted synthesis of 1,2,3-triazole catalyzed by 2_CNT-ox-Na (■) and 4_CNT-ox-Na (■). Reaction conditions: 0.5 mol% of 2_CNT-ox-Na vs. benzyl bromide, 1.0 mol% of 4_CNT-ox-Na vs. benzyl bromide, 15 min, 30 W microwave irradiation, 80 °C.
Catalysts 11 00185 g002
Table
Table 1. Characterization of carbon materials using BET analysis.
Table 1. Characterization of carbon materials using BET analysis.
Carbon MaterialSBET, m2 g−1Pore Volume, cm3 g−1Pore Size, nm
AC8660.455.2
AC-ox2230.225.0
AC-ox-Na1910.154.9
CNT2562.5430.9
CNT-ox2881.3717.4
CNT-ox-Na2531.1616.3
Table
Table 2. Metal loading of Cu on the carbon materials a.
Table 2. Metal loading of Cu on the carbon materials a.
Carbon MaterialCu Complex
1234
g/L%g/L%g/L%g/L%
AC0.010.10.020.3000.010.1
AC-ox0.070.90.060.80.050.60.040.5
AC-ox-Na0.111.50.111.50.091.20.121.6
CNT000.010.10000
CNT-ox0.060.80.020.30.030.400
CNT-ox-Na0.060.80.111.50.060.80.101.3
a Values obtained from ICP analysis.
Table
Table 3. The 1,3-dipolar azide-alkyne cycloaddition catalyzed by Cu(I)-DAPTA complexes (1–4) anchored on different carbon supports a.
Table 3. The 1,3-dipolar azide-alkyne cycloaddition catalyzed by Cu(I)-DAPTA complexes (1–4) anchored on different carbon supports a.
Catalysts 11 00185 i001
EntryComplexSupportCatalyst Loading b, mol%Time, minTotal Volume of Solvent, mLYield c, %TON d
11AC-ox-Na0.5151.530.561
22AC-ox-Na0.5151.531.463
33AC-ox-Na0.5151.52244
44AC-ox-Na0.5151.52039
51CNT-ox-Na0.5151.52346
62CNT-ox-Na0.5151.54182
73CNT-ox-Na0.5151.52959
84CNT-ox-Na0.5151.53366
91AC-ox-Na0.5151.527 e54
102AC-ox-Na0.5151.532 e65
112CNT-ox-Na0.5151.540 e80
123AC-ox-Na0.5151.529 e59
134AC-ox-Na0.5151.538 e75
144CNT-ox-Na0.5151.540 e80
152CNT-ox-Na0.5301.52959
162CNT-ox-Na0.1151.521207
172CNT-ox-Na0.5152.03265
182CNT-ox-Na0.5302.02755
192CNT-ox-Na0.5151.01734
202CNT-ox-Na0.5301.02346
214CNT-ox-Na0.1301.523230
224CNT-ox-Na0.5301.52550
234CNT-ox-Na0.5601.54284
244CNT-ox-Na1.0151.54848
a Reaction conditions: benzyl bromide (0.30 mmol), phenylacetylene (0.33 mmol), NaN3 (0.33 mmol), H2 O: MeCN (1:1 v/v), 80 °C. b Calculated vs. benzyl bromide. c Isolated yield. d Turnover number = moles of product per mol of metal content in the catalyst (as obtained from ICP). e Reaction temperature: 125 °C.
Table
Table 4. Synthesis of triazoles using phenylacetylene and substituted benzyl bromides a.
Table 4. Synthesis of triazoles using phenylacetylene and substituted benzyl bromides a.
EntryCatalystBenzyl BromideProductTime, minYield b, %TON
12_CNT-ox-Na Catalysts 11 00185 i002 Catalysts 11 00185 i003153876
22_CNT-ox-Na Catalysts 11 00185 i004 Catalysts 11 00185 i005154897
32_CNT-ox-Na Catalysts 11 00185 i006 Catalysts 11 00185 i007154998
44_CNT-ox-Na Catalysts 11 00185 i008 Catalysts 11 00185 i0096051101
54_CNT-ox-Na Catalysts 11 00185 i010 Catalysts 11 00185 i011603774
64_CNT-ox-Na Catalysts 11 00185 i012 Catalysts 11 00185 i013603979
74_CNT-ox-Na Catalysts 11 00185 i014 Catalysts 11 00185 i015603774
84_CNT-ox-Na Catalysts 11 00185 i016 Catalysts 11 00185 i017603264
a Reaction conditions: benzyl bromide (0.30 mmol), phenylacetylene (0.33 mmol), NaN3 (0.33 mmol), H2O: MeCN (1.5 mL, 1:1 v/v), 80 °C, 0.5 mol% of catalysts (2_CNT-ox-Na and 4_CNT-ox-Na) vs. benzyl bromide derivatives. b Isolated yield.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Librando, I.L.; Mahmoud, A.G.; Carabineiro, S.A.C.; Guedes da Silva, M.F.C.; Geraldes, C.F.G.C.; Pombeiro, A.J.L. The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles. Catalysts 2021, 11, 185. https://doi.org/10.3390/catal11020185

AMA Style

Librando IL, Mahmoud AG, Carabineiro SAC, Guedes da Silva MFC, Geraldes CFGC, Pombeiro AJL. The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles. Catalysts. 2021; 11(2):185. https://doi.org/10.3390/catal11020185

Chicago/Turabian Style

Librando, Ivy L., Abdallah G. Mahmoud, Sónia A. C. Carabineiro, M. Fátima C. Guedes da Silva, Carlos F. G. C. Geraldes, and Armando J. L. Pombeiro. 2021. "The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles" Catalysts 11, no. 2: 185. https://doi.org/10.3390/catal11020185

APA Style

Librando, I. L., Mahmoud, A. G., Carabineiro, S. A. C., Guedes da Silva, M. F. C., Geraldes, C. F. G. C., & Pombeiro, A. J. L. (2021). The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles. Catalysts, 11(2), 185. https://doi.org/10.3390/catal11020185

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop