Next Article in Journal
Preparation and Catalytic Performance of Metal-Rich Pd Phosphides for the Solvent-Free Selective Hydrogenation of Chloronitrobenzene
Next Article in Special Issue
Efficient Biodiesel Conversion from Microalgae Oil of Schizochytrium sp.
Previous Article in Journal
Comprehensive Comparison between Nanocatalysts of Mn−Co/TiO2 and Mn−Fe/TiO2 for NO Catalytic Conversion: An Insight from Nanostructure, Performance, Kinetics, and Thermodynamics
Previous Article in Special Issue
Efficient Catalytic Dehydration of High-Concentration 1-Butanol with Zn-Mn-Co Modified γ-Al2O3 in Jet Fuel Production
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Catalysts
Volume 9
Issue 2
10.3390/catal9020176
catalysts-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications

by
Chunyang Zhang
1,
Sanket Bhoyate
1,
Chen Zhao
1,
Pawan K. Kahol
2,
Nikolaos Kostoglou
3,*,
Christian Mitterer
3,
Steven J. Hinder
4,
Mark A. Baker
4,
Georgios Constantinides
5,
Kyriaki Polychronopoulou
6,7,
Claus Rebholz
8 and
Ram K. Gupta
1,*
1
Department of Chemistry, Pittsburg State University, Pittsburg, KS 66762, USA
2
Department of Physics, Pittsburg State University, Pittsburg, KS 66762, USA
3
Department of Materials Science, Montanuniversitӓt Leoben, 8700 Leoben, Austria
4
Department of Mechanical Engineering Sciences, University of Surrey, Guildford, Surrey GU2 7XH, UK
5
Department of Mechanical Engineering and Materials Science and Engineering, Cyprus University of Technology, 3036 Lemesos, Cyprus
6
Department of Mechanical Engineering, Khalifa University of Science and Technology, P.O. Box 127788 Abu Dhabi, UAE
7
Center for Catalysis and Separation, Khalifa University of Science and Technology, P.O. Box 127788 Abu Dhabi, UAE
8
Department of Mechanical and Manufacturing Engineering, University of Cyprus, 1678 Nicosia, Cyprus
*
Authors to whom correspondence should be addressed.
Catalysts 2019, 9(2), 176; https://doi.org/10.3390/catal9020176
Submission received: 20 January 2019 / Revised: 5 February 2019 / Accepted: 12 February 2019 / Published: 13 February 2019
(This article belongs to the Special Issue Catalysis for Energy Production)
Browse Figures
Versions Notes

Abstract

:
To contribute to solving global energy problems, a multifunctional CoFe2O4 spinel was synthesized and used as a catalyst for overall water splitting and as an electrode material for supercapacitors. The ultra-fast one-step electrodeposition of CoFe2O4 over conducting substrates provides an economic pathway to high-performance energy devices. Electrodeposited CoFe2O4 on Ni-foam showed a low overpotential of 270 mV and a Tafel slope of 31 mV/dec. The results indicated a higher conductivity for electrodeposited compared with dip-coated CoFe2O4 with enhanced device performance. Moreover, bending and chronoamperometry studies suggest excellent durability of the catalytic electrode for long-term use. The energy storage behavior of CoFe2O4 showed high specific capacitance of 768 F/g at a current density of 0.5 A/g and maintained about 80% retention after 10,000 cycles. These results demonstrate the competitiveness and multifunctional applicability of the CoFe2O4 spinel to be used for energy generation and storage devices.

1. Introduction

According to the report presented by the International Renewable Energy Agency (IRENA), the Renewable Energy Policy Network for the 21st Century (REN21), and the International Energy Agency, transport is the second largest energy end-use sector, accounting for 29% of the total final energy consumption in the year 2015 [1]. About 96% of this energy comes from petroleum products, making it heavily reliant on fossil fuels. Several companies such as Tesla, Toyota, Nissan, Mercedes-Benz, Hyundai, Honda, and others have targeted their automotive market in the way that global dependence on petroleum resources is reduced [2,3]. Thus, major research focuses on multifunctional materials for green energy applications to be used for electric motor and fuel cell vehicles.
Spinels have recently attracted considerable research attention for energy applications [4,5,6]. They represent a group of composite metals with such multifunctional capabilities, having a formula of AB2O4 (A and B are metal ions) [7]. Mixed phase composition of transition metals into spinel structure provides advantageous electrical and catalytic properties required characteristics for energy conversion and storage [4,5,6]. Previously, electroactive materials such as structured carbons [8,9,10,11,12,13,14], transition metal oxides, and sulfides [15,16,17,18] have been studied for applications in batteries, supercapacitors, and fuel cells, as well as for water splitting. However, the lower activity of carbon-based materials, the inferior electronic conductivity of transition metal oxides, and the poor stability of transition metal sulfides limit their applicability for future energy devices [14,19,20,21]. Transition metal-based systems including oxides, hydroxides, or sulfides of cobalt and iron have been studied in the past few years for energy conversion or storage applications [22,23,24,25,26,27]. However, these materials show limited electrochemical performance. Various studies suggest that spinels of cobalt and iron provide better electronic conductivity, a higher population of active sites, and thus better electrochemical performance. For example, Kumbhar et al. synthesized spinel CoFe2O4 nano-flakes on a stainless steel substrate by a simple chemical route using an alkaline bath containing Co2+ and Fe2+ ions for supercapacitor application [28]. An impedance test of spinel electrodes showed the low equivalent series resistance of about 1.1 Ω. Yu et al. reported a novel hierarchical Cu on a CoFe layered double hydroxide (LDH) core-shell nanostructured catalyst for oxygen and hydrogen evolution reaction [29]. The unique structure of LDH provides more active sites, leading to better catalytic performance. Another report suggests the use of iron–cobalt oxide nanosheets (FexCoy-ONSs) as a stable water oxidation catalyst [30]. Excellent oxygen evolution reaction (OER) activity was observed as a result of mass diffusion/transport of OH- ions facilitated by ultrathin nanosheets, improved electronic conductivity, and adsorption of H2O onto close Co3+ sites.
Several methods such as solvothermal, hydrothermal, chemical co-precipitation, and solution reduction reaction are reported for the synthesis of iron–cobalt oxide [30,31,32,33,34,35]. Most of the synthesized iron–cobalt oxide samples were powders, which are coated onto conductive substrates by dip-coating. The use of electrically insulating binders reduces the conductivity and thus affects the electronic activity of the material. Furthermore, the stability and flexibility of the electrodes are also compromised. However, direct electrodeposition of materials on conductive substrates could overcome this problem. For example, Lu et al. fabricated a hierarchically structured three-dimensional nickel-iron composite on Ni-foam for efficient oxygen evolution catalyst electrode using a one-step electrodeposition [36]. Higher conductivity and active surface area of the material over the electrode resulted in better electrochemical performance.
In this work, CoFe2O4 was deposited on Ni-foam and carbonized cotton cloth using a facile electrodeposition method. The synthesized CoFe2O4 on Ni-foam exhibited high electrocatalytic activity for OER and hydrogen evolution reaction (HER) with small overpotential. In addition, the CoFe2O4 electrode showed high specific capacitance of 768 F/g at the current density of 0.5 A/g, maintaining stable performance with 80% retention up to 10,000 charge–discharge cycles. Our results suggest that electrodeposited CoFe2O4 on Ni-foam could be used as a multifunctional material for both water splitting and supercapacitor applications.

2. Results and Discussion

X-ray diffraction (XRD) was used to study phase purity and crystallinity of the synthesized samples. Figure S1 shows the XRD patterns of CoFe2O4, CoFe2O4 ED@NF, and CoFe2O4 ED@carbonized cotton cloth (CCC). The XRD pattern of CoFe2O4 shows characteristic peaks of (111), (220), (311), (400), (422), (511), (440), and (533) planes, corresponding to the cubic structure of FeCo2O4. No peaks other than those stemming from CoFe2O4 were observed, confirming phase purity of the synthesized CoFe2O4. The XRD patterns of CoFe2O4 ED@NF and CoFe2O4 ED@CCC do not show any peaks attributable to CoFe2O4, indicating either the amorphous nature of the electrodeposited CoFe2O4 layer or the lack of sufficient diffracted X-ray signal from the coating on the porous Ni-foam structure.
An X-ray photoelectron spectroscopy (XPS) wide scan of the CoFe2O4 surface is presented in Figure S2. The Co 2p and O 1s peaks are given in Figure 1. Considering the Co 2p peak shape, this is very consistent with spectra of Co3O4 standards given by Gu et al. [37] and Yang et al. [38], showing a 2p3/2 peak binding energy of 779.9 eV and a broad plateau-like satellite structure to higher binding energies between the 2p3/2 and 2p1/2 peaks. Thus, this peak shape and satellite structure is representative of mixed Co2+/Co3+ chemical states. Compared with the Co 2p spectrum for CoFe2O4 given by Gu et al. [37] and Sagu et al. [39], the peak shape of the electrodeposited CoFe2O4 shows a peak shape that is more consistent with that of Co3O4, and hence a 1:1 stoichiometric Co2+/Co3+ fraction rather than the Co2+ rich compound observed in these other studies. However, it should be noted that quantification of the XPS spectra shows an enrichment of Co at the surface, indicating that the XPS spectra and outermost surface composition are not fully representative of the bulk material. The O 1s spectrum (Figure 1b) shows a peak at 530.1 eV corresponding to the metal oxide, with peaks at 531.6 and 532.7 eV corresponding to hydroxyl and adsorbed water species, respectively.
Figure 2a–c present scanning electron microscopy (SEM) images of electrodeposited CoFe2O4 over Ni-foam at different magnifications. The coating over the Ni-foam is relatively uniform and dense, as observed from the images. The cracks in the coating are most likely the result of dehydration, associated with removal of the electrode from solution. The energy dispersive X-ray spectroscopy (EDS) O elemental image in Figure 3 confirms the general uniform distribution and composition of CoFe2O4 over the Ni-foam substrate. However, the Fe and Co images in Figure 3 show that there are differences in the Fe/Co ratio between the ‘smoother’ surface regions and underlying ‘mottled’ areas of the coating. Considering the XPS results, it seems most likely that the smooth outer layer is CoFe2O4 and this predominantly covers the Ni-foam. However, in some areas, this layer has become detached (possibly because of stresses associated with dehydration or transfer to the analytical laboratory), exposing a more Co-rich underlying layer. SEM images for CoFe2O4 electrodeposited on CCC are given in Figure S3a–c, evidencing evenly coated fibers.
The OER activity of the CoFe2O4 samples was studied by linear sweep voltammetry (LSV). The polarization curves for CoFe2O4 ED@NF, CoFe2O4@NF, and CoFe2O4 ED@CCC in 1M NaOH are shown in Figure 4a. The CoFe2O4 ED@NF electrode required a low overpotential of 270 mV to achieve a current density of 10 mA/cm2. This value is significantly lower than for CoFe2O4@NF (308 mV) and CoFe2O4 ED@CCC (410 mV) electrodes. The observed difference could be the result of the high conductive pathway between the CoFe2O4 catalyst and the Ni-foam, compared with the electrode synthesized by dip-coating. The Nyquist plot in Figure 4c at 0.5 V (versus SCE) shows lower charge transfer resistance for the CoFe2O4 ED@NF electrode, which could be responsible for better catalytic performance over other synthesized electrodes. The reduced impedance over increasing potential can be observed from the Nyquist plot for the CoFe2O4 ED@NF electrode given in Figure S4. The kinetics of the OER reaction were analyzed using Tafel slopes (Figure 4b). The Tafel slope for CoFe2O4 ED@NF, CoFe2O4@NF, and CoFe2O4 ED@CCC was calculated to be 31, 47, and 119 mV/dec, respectively. The low Tafel slope value for the CoFe2O4 ED@NF electrode indicates faster OER kinetics and can be correlated to the high electrocatalytic surface area of the electrodeposited Ni-foam electrode [15]. The electrochemical effective surface area was calculated using cyclic voltammetry (CV) curves in the non-faradic region (Figure S5) and the plotting relation of current density with respective scan rate is given in Figure 4d. A linear relationship was observed, showing a higher slope for CoFe2O4 ED@NF (65 mC/cm2) than CoFe2O4@NF (40 mC/cm2) and CoFe2O4 ED@CCC (3 mC/cm2), thus indicating a larger effective electrochemical surface area. The higher surface area of CoFe2O4 ED@NF is consistent with the excellent OER performance. The CoFe2O4 ED@NF electrode of this study required a lower overpotential for achieving a current density of 10 mA/cm2 compared with other FeCo-based reports. For example, Yan et al. synthesized a CoFe2O4 hybrid strongly coupled with carbon nanotubes and observed a higher overpotential (>0.6 V) to achieve 5 mA/cm2 in 0.1 M KOH [31]. Another hybrid of CoFe2O4 nanoparticles supported on nitrogen/sulfur dual-doped three-dimensional (3D) reduced graphene oxide networks (CFO/NS-rGO) showed an overpotential of about 0.55 V to achieve the current density of 10 mA/cm2 [32]. The iron–cobalt oxide nanosheets (FeCo-ONS) prepared by Zhuang et al. required an overpotential of 308 mV to reach 10 mA/cm2 with a Tafel slope of 36.8 mV/dec [30]. Table S1 shows a detailed comparison of catalytic electrodes synthesized within this work with previously reported CoFe2O4 samples. It can be observed that the CoFe2O4 ED@NF electrode requires a low overpotential and shows higher kinetics of reaction compared with all the other reported values.
The effect of bending on the OER properties of the CoFe2O4 ED@NF electrode was studied to investigate its potential to be used as a flexible electrode. The polarization curves in Figure 5a show almost identical behavior for curves before and after bending the electrode by a 60o angle. Moreover, the durability of the electrode was assessed for 17 h using chronoamperometry (Figure 5b). The chronical current measurement showed almost constant values without any detriment over the catalytic performance of the electrodes, suggesting the durable performance of the electrode for long-term use.
As several reports suggest the use of spinels for multifunctional catalytic application [7,31,40], herein we evaluated the performance of the CoFe2O4 ED@NF electrode for HER catalysis. Figure S6a shows the LSV polarization curves. A small overpotential of −270 mV was required to achieve the current density of −10 mA/cm2. Moreover, the reaction kinetics using the Tafel slope yielded a low value of 94 mV/dec (Figure S6b). The value observed for the CoFe2O4 electrode as HER catalyst was lower compared with other similar catalytic systems. For example, a hydrothermally synthesized CoFe2O4 NPs-on-CFP electrode by Kargar and co-workers required an overpotential of −356 mV to achieve a current of −10 mA/cm2 [41]. The comparison table of other reports based on Fe, Co, and other non-precious transition metals in alkaline media can be observed from Table S2. Moreover, the chronoamperometry test indicated a stable HER performance of the catalyst electrode for 17 h, suggesting long-term durability of the electrode (Figure S6c). This indicates that the CoFe2O4 ED@NF electrode could be used as a bifunctional water-splitting catalyst.
An electrolyzer cell was fabricated using a two-electrode system to study water-splitting of catalytic electrodes. In this study, the CoFe2O4 ED@NF electrode was used as an anode and a standard platinum carbon (Pt–C) electrode was used as a cathode. Figure 6a shows polarization curves using the LSV test for different electrolyzer cells. The CoFe2O4//Pt-C electrolyzer system required a low potential of 1.56 V to obtain a current density of 10 mA/cm2 compared with benchmark electrolyzer cells such as IrO2//Pt–C (1.57 V), IrO2//IrO2 (1.77 V), and Pt–C//Pt–C (1.64 V), which all required higher potentials. Moreover, the chronoamperometry test yielded stable performance of the CoFe2O4//Pt–C electrolyzer system for more than 17 h, as evidenced by Figure 6b.
The energy storage capacity of the CoFe2O4 ED@NF electrode was measured using CV. The specific capacitance values can be predicted based on the area under the CV curves. Figure 7a depicts the specific capacitance values as a function of varying scan rates. Higher specific capacitance values were observed with decreasing scan rates. A similar behavior was observed in other reports of energy storage systems [28,42,43,44]. The CV curves of CoFe2O4 ED@NF in 3M KOH electrolyte at various scan rates are given in Figure S7a. Pairs of redox peaks in the CV curves indicate the pseudocapacitive behavior of the material. This resulted in a high specific capacitance of 2246 F/g at a scan rate of 1 mV/s. The charge storage behavior was further analyzed using the galvanostatic charge–discharge test. Figure 7b shows the relationship of specific capacitance at different current densities. At lower charging current, high capacitance values were obtained. A similar relation of current density with discharge time can be observed from Figure S7b. This could be the result of sufficient time provided for redox reactions at low current densities. Redox reactions promoted at low current densities lead to better charge storage compared with other non-faradic systems [43,44,45,46]. At a current density of 0.5 A/g, a high specific capacitance of 768 F/g was observed. This result is comparable to other reported values for electrodes within an Co–Fe based system, as summarized in Table S3. Moreover, the stability test of the electrode showed high capacitance retention of about 80% after 10,000 cycles (Figure S8), which is better compared with other reports based on Co–Fe systems. For example, flower-like CoFe2O4/FeOOH nanocomposites maintain 91.3% retention after 1000 cycles [47]. For reduced graphene oxide–CoFe2O4 composites, the capacitance retention is about 78.1% after 1000 cycles [35]. This suggests that the synthesized CoFe2O4 ED@NF electrodes showed higher charge storage capacities and stable performance to be used as energy storage electrode materials.

3. Materials and Methods

3.1. Materials

All chemicals were of analytical grade purity and were used without any further purification. Cobalt (II) nitrate and iron (III) nitrate (99.9%) were purchased from Sigma Aldrich, USA. All other chemicals were purchased from Fisher Scientific, USA.

3.2. Preparation of Electrodeposited CoFe2O4 Electrodes

Nanostructured CoFe2O4 was electrodeposited on Ni-foam and carbonized cotton cloth (CCC) using a standard three-electrode system. Before electrodeposition, Ni-foam was thoroughly cleaned [15]. In the three-electrode system, Ni-foam as a working electrode, a platinum plate as a counter electrode, and an Ag/AgCl electrode as a reference electrode were used. The electrolyte consists of an aqueous solution of 0.582 g of cobalt nitrate and 1.616 g of iron nitrate in 20 ml deionized water. The electrodeposition was carried out at −1.0 V (vs. Ag/AgCl) for a period of 5 min to obtain a thin brown film covering the Ni-foam [48]. The average weight of the deposited material was 1.2 mg/cm2.
Electrodeposition of CoFe2O4 on the CCC was carried out using the above setup, where CCC was used instead of Ni-foam as a substrate. The CCC was prepared by calcination of carbon cloth in a tube furnace at 800 °C for two hours under N2 atmosphere (at 5 °C/min) [49]. Electrodeposition of CoFe2O4 on CCC was carried out under similar conditions, but for 50 min to achieve 1.2 mg/cm2 of the deposited material.

3.3. Preparation of Dip-Coated CoFe2O4 Electrode

To compare the effect of the direct growth of CoFe2O4 on a conducting surface, we have dip-coated CoFe2O4 powders on the Ni-foam after synthesizing CoFe2O4. For this reason, CoFe2O4 was synthesized by a simple hydrothermal method, where 0.582 g of cobalt nitrate, 1.616 g of iron nitrate, and 7.2 g of urea were dissolved in a mixture of 30 ml of isopropyl alcohol and 6 ml of water. The mixture was stirred for 30 min and transferred into a 45 mL Teflon-lined stainless-steel autoclave. The reaction was carried out at 120 °C for 12 h. The resultant precipitates were washed several times using water and ethanol. The separation was carried out using centrifugation at 10,000 rpm, followed by drying under vacuum at 80 °C for 6 h and calcination at 350 °C in air for 2 h (5 °C/min). The CoFe2O4 electrode was prepared by dipping the Ni-foam in a slurry of CoFe2O4 powder (80 wt.%), acetylene black (10 wt.%), and polyvinylidene difluoride (10 wt.%) in N-methyl pyrrolidinone. The material loading on the Ni-foam was about 1.2 mg/cm2. Sample electrodes fabricated by deposition of CoFe2O4 over Ni-foam using electrodeposition and dip-coating are termed in the following as CoFe2O4 ED@NF and CoFe2O4@NF, respectively, while the sample electrodeposited over carbonized carbon cloth is referred to as CoFe2O4 ED@CCC.

3.4. Characterization

The synthesized samples were characterized using using various methods. X-ray diffraction (XRD) was used to study the crystallinity and phase purity of the samples. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS) was used to investigate structural, chemical, and morphological properties. XRD patterns were recorded using a Shimadzu X-ray diffractometer (Lenexa, Kansas, USA). CuKα1 radiation (λ = 1.5406 Å) in the 2θ-θ mode was used to study the crystallinity and phase purity of the synthesized samples. Microstructural properties of the samples were investigated using a Quanta 200 SEM (FEI, Hillsboro, Oregon, USA). The elemental compositions and elemental mapping of the synteized samples were recorded for the sysnthesized samples using EDS. The chemical composition of the synthesized samples was determined using XPS analysis using a ThermoFisher Scientific Instruments (East Grinstead, UK). A monochromated Al Kα radiation source (hν = 1486.6 eV) and an X-ray spot of ~400 μm in radius were used for data recording. The elemental survey spectra were recorded using a pass energy of 200 eV. A passing energy of 50 eV was used for recording high-resolution core level spectra for all the elements. The Advantage software was used for the peak fittings.
Electrochemical performance was studied using a standard three-electrode system and a Versastat4-500 electrochemical workstation (Princeton Applied Research, TN, USA). CoFe2O4 electrodes were used as working electrodes. Cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) measurements were performed to examine the energy storage performance of electrodes in 3M KOH electrolyte. The electrocatalytic behavior of the CoFe2O4 electrodes for OER and HER was measured in 1M NaOH electrolyte. Electrocatalytic testing includes linear sweep voltammetry (LSV), cyclic voltammetry (CV), chronoamperometry, and electrochemical impedance spectroscopy (EIS). LSV was performed at a scan rate of 1 mV/s in both the OER and HER region. The potential was converted to a reversible hydrogen electrode (RHE) using the Nernst equation. All the EIS measurements were recorded in a frequency range of 0.05 Hz to 10 kHz with an applied 10 mV of AC amplitude.

4. Conclusions

In summary, we synthesized an efficient catalyst and energy storage material using a facile, ultra-fast, and one-step electrodeposition method to grow CoFe2O4 over Ni-foam and carbon cloth. A uniform distribution of CoFe2O4 electrochemically deposited over the surface of the substrate was observed through SEM and EDX. A low overpotential of 270 mV was calculated for OER when CoFe2O4 was grown over Ni-foam using electrodeposition. The obtained low Tafel slope of 31 mV/dec compared with a dip-coated sample represents excellent reaction kinetics. This could be attributed to a high conductive pathway stemming from the CoFe2O4 deposited over Ni-foam. Flexibility and chronoamperometry evidenced the stable catalytic performance of the electrodes. The energy storage capacity of the material using galvanostatic charge–discharge test show high specific capacitance of 768 F/g at a current density of 0.5 A/g. Stability of electrodes after 10,000 cycles showed capacitance retention of 80%. The obtained results reveal the promising potential of efficient, multi-functional, and cost-effective CoFe2O4 catalysts for energy generation and storage systems.

Supplementary Materials

The following are available online at https://www.mdpi.com/2073-4344/9/2/176/s1, Figure S1. XRD patterns of (a) CoFe2O4, (b) CoFe2O4 ED@CCC and CoFe2O4 ED@NF. Figure S2. XPS wide scan of the CoFe2O4. Figure S3. SEM images of electrodeposited CoFe2O4 on carbonized carbon cloth. Figure S4. Nyquist plots for the CoFe2O4 ED@NF sample at various potentials (vs. SCE). Figure S5. CV curves in non-faradic region for (a) CoFe2O4 ED@NF, (b) CoFe2O4@NF, and (c) CoFe2O4 ED@CCC. Figure S6. (a): Polarization curves, (b) Tafel slopes, and (c) chronoamperometry data for CoFe2O4 ED@NF in HER range. Figure S7. (a) CV curves and (b) GCD curves of CoFe2O4 ED@NF obtained at various scan rates and current densities in 3M KOH electrolyte. Figure S8. Cyclic stability plot for CoFe2O4 ED@NF sample using 10,000 galvanostatic charge-discharge measurements. Table S1. Comparison of OER performance of some recently reported FeCo-based electrocatalysts. Table S2. Comparison of HER performance of some recently reported electrocatalysts in alkaline media. Table S3. Comparison of specific capacitances of some reported FeCo-based samples.

Author Contributions

R.K.G. conceived the project, designed the experiments, interpreted the data, and finalized the manuscript. The first draft of the manuscript was written by C.Z. (Chunyang Zhang) and S.B. C.Z. (Chunyang Zhang) and S.B. performed all the electrochemical measurements and recorded the X.R.D. data. G.C. provided SEM/EDS images and analysis. M.B. and S.H. provided X.P.S. data and analysis. All authors reviewed and commented on the manuscript.

Funding

This research received no external funding. The APC was funded by the Abu Dhabi Education and Knowledge (ADEK) Department, Award for Research Excellence, AARE 2017.

Acknowledgments

Ram K. Gupta expresses his sincere acknowledgment to the Polymer Chemistry Program and the Kansas Polymer Research Center, Pittsburg State University, for providing financial and research support to complete this project.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. IRENA; IEA; REN21. Renewable Energy Policies in a Time of Transition. 2018. Available online: https://www.irena.org/publications/2018/Apr/Renewable-energy-policies-in-a-time-of-transition.
  2. Mitch Jacoby. Fuel-Cell Cars Finally Drive off the Lot. Chem. Eng. News Arch. 2017, 95, 28. [Google Scholar]
  3. Rissman, J. The Future Of Electric Vehicles In The U.S., Part 1: 65%-75% New Light-Duty Vehicle Sales By 2050. Forbes, 14 September 2017; 1. [Google Scholar]
  4. Hu, H.; Guan, B.; Xia, B.; Lou, X.W. Designed Formation of Co3O4/NiCo2O4 Double-Shelled Nanocages with Enhanced Pseudocapacitive and Electrocatalytic Properties. J. Am. Chem. Soc. 2015, 137, 5590–5595. [Google Scholar] [CrossRef] [PubMed]
  5. Fu, W.; Zhao, C.; Han, W.; Liu, Y.; Zhao, H.; Ma, Y.; Xie, E. Cobalt Sulfide Nanosheets Coated on NiCo2S4 Nanotube Arrays as Electrode Materials for High-Performance Supercapacitors. J. Mater. Chem. A 2015, 3, 10492–10497. [Google Scholar] [CrossRef]
  6. Chauhan, M.; Reddy, K.P.; Gopinath, C.S.; Deka, S. Copper Cobalt Sulfide Nanosheets Realizing a Promising Electrocatalytic Oxygen Evolution Reaction. ACS Catal. 2017, 7, 5871–5879. [Google Scholar] [CrossRef]
  7. Zhao, Q.; Yan, Z.; Chen, C.; Chen, J. Spinels: Controlled Preparation, Oxygen Reduction/Evolution Reaction Application, and Beyond. Chem. Rev. 2017, 117, 10121–10211. [Google Scholar] [CrossRef] [PubMed]
  8. Kostoglou, N.; Koczwara, C.; Prehal, C.; Terziyska, V.; Babic, B.; Matovic, B.; Constantinides, G.; Tampaxis, C.; Charalambopoulou, G.; Steriotis, T.; et al. Nanoporous Activated Carbon Cloth as a Versatile Material for Hydrogen Adsorption, Selective Gas Separation and Electrochemical Energy Storage. Nano Energy 2017, 40, 49–64. [Google Scholar] [CrossRef]
  9. Talapaneni, S.N.; Lee, J.H.; Je, S.H.; Buyukcakir, O.; Kwon, T.; Polychronopoulou, K.; Choi, J.W.; Coskun, A. Chemical Blowing Approach for Ultramicroporous Carbon Nitride Frameworks and Their Applications in Gas and Energy Storage. Adv. Funct. Mater. 2017, 27, 1604658. [Google Scholar] [CrossRef]
  10. Li, Y.; Samad, Y.A.; Polychronopoulou, K.; Alhassan, S.M.; Liao, K. From Biomass to High Performance Solar–thermal and Electric–thermal Energy Conversion and Storage Materials. J. Mater. Chem. A 2014, 2, 7759–7765. [Google Scholar] [CrossRef]
  11. Chen, S.; Bi, J.; Zhao, Y.; Yang, L.; Zhang, C.; Ma, Y.; Wu, Q.; Wang, X.; Hu, Z. Nitrogen-Doped Carbon Nanocages as Efficient Metal-Free Electrocatalysts for Oxygen Reduction Reaction. Adv. Mater. 2012, 24, 5593–5597. [Google Scholar] [CrossRef]
  12. Balogun, M.-S.; Qiu, W.; Yang, H.; Fan, W.; Huang, Y.; Fang, P.; Li, G.; Ji, H.; Tong, Y. A Monolithic Metal-Free Electrocatalyst for Oxygen Evolution Reaction and Overall Water Splitting. Energy Environ. Sci. 2016, 9, 3411–3416. [Google Scholar] [CrossRef]
  13. Li, W.; Liang, C.; Qiu, J.; Zhou, W.; Han, H.; Wei, Z.; Sun, G.; Xin, Q. Carbon Nanotubes as Support for Cathode Catalyst of a Direct Methanol Fuel Cell. Carbon N. Y. 2002, 40, 791–794. [Google Scholar] [CrossRef]
  14. Zheng, Y.; Liu, J.; Liang, J.; Jaroniec, M.; Qiao, S.Z. Graphitic Carbon Nitride Materials: Controllable Synthesis and Applications in Fuel Cells and Photocatalysis. Energy Environ. Sci. 2012, 5, 6717–6731. [Google Scholar] [CrossRef]
  15. Ranaweera, C.K.; Zhang, C.; Bhoyate, S.; Kahol, P.K.; Ghimire, M.; Mishra, S.R.; Perez, F.; Gupta, B.K.; Gupta, R.K. Flower-Shaped Cobalt Oxide Nano-Structures as an Efficient, Flexible and Stable Electrocatalyst for the Oxygen Evolution Reaction. Mater. Chem. Front. 2017, 1, 1580–1584. [Google Scholar] [CrossRef]
  16. Chen, J.; Xu, L.; Li, W.; Gou, X. Fe2O3 Nanotubes in Gas Sensor and Lithium-Ion Battery Applications. Adv. Mater. 2005, 17, 582–586. [Google Scholar] [CrossRef]
  17. Zhang, C.; Wang, Z.; Bhoyate, S.; Morey, T.; Neria, B.L.; Vasiraju, V.; Gupta, G.; Palchoudhury, S.; Kahol, P.K.; Mishra, S.R.; et al. MoS2 Decorated Carbon Nanofibers as Efficient and Durable Electrocatalyst for Hydrogen Evolution Reaction. C 2017, 3, 33. [Google Scholar] [CrossRef]
  18. Shi, J.; Li, X.; He, G.; Zhang, L.; Li, M. Electrodeposition of High-Capacitance 3D CoS/Graphene Nanosheets on Nickel Foam for High-Performance Aqueous Asymmetric Supercapacitors. J. Mater. Chem. A 2015, 3, 20619–20626. [Google Scholar] [CrossRef]
  19. Joo, S.H.; Choi, S.J.; Oh, I.; Kwak, J.; Liu, Z.; Terasaki, O.; Ryoo, R. Ordered Nanoporous Arrays of Carbon Supporting High Dispersions of Platinum Nanoparticles. Nature 2001, 412, 169–172. [Google Scholar] [CrossRef] [PubMed]
  20. Transition-metal-oxide, B.; Carbon, N.S.; Chen, P.; Shen, G.; Shi, Y.; Chen, H.; Zhou, C. Preparation and Characterization of Flexible Asymmetric Supercapacitors. ACS Nano 2010, 4, 4403–4411. [Google Scholar]
  21. Shen, L.; Wang, J.; Xu, G.; Li, H.; Dou, H.; Zhang, X. NiCo2S4 Nanosheets Grown on Nitrogen-Doped Carbon Foams as an Advanced Electrode for Supercapacitors. Adv. Energy Mater. 2015, 5, 2–8. [Google Scholar] [CrossRef]
  22. 22. Zaquine, C.; Bhoyate, S.; Wang, F.; Li, X.; Siam, K.; Kahol, P.K.; Gupta, R.K. Effect of Solvent for Tailoring the Nanomorphology of Multinary CuCo2S4 for Overall Water Splitting and Energy Storage. J. Alloys Compd. 2019, 784, 1–7. [Google Scholar] [CrossRef]
  23. Liu, R.; Jiang, Z.; Liu, Q.; Zhu, X.; Liu, L.; Ni, L.; Shen, C. Novel Red Blood Cell Shaped α-Fe2O3 Microstructures and FeO(OH) Nanorods as High Capacity Supercapacitors. RSC Adv. 2015, 5, 91127–91133. [Google Scholar] [CrossRef]
  24. Guan, C.; Liu, J.; Wang, Y.; Mao, L.; Fan, Z.; Shen, Z.; Zhang, H.; Wang, J. Iron Oxide-Decorated Carbon for Supercapacitor Anodes with Ultrahigh Energy Density and Outstanding Cycling Stability. ACS Nano 2015, 9, 5198–5207. [Google Scholar] [CrossRef] [PubMed]
  25. Lorkit, P.; Panapoy, M.; Ksapabutr, B. Iron Oxide-Based Supercapacitor from Ferratrane Precursor via Sol–gel-Hydrothermal Process. Energy Procedia 2014, 56, 466–473. [Google Scholar] [CrossRef]
  26. Liu, J.; Nai, J.; You, T.; An, P.; Zhang, J.; Ma, G.; Niu, X.; Liang, C.; Yang, S.; Guo, L. The Flexibility of an Amorphous Cobalt Hydroxide Nanomaterial Promotes the Electrocatalysis of Oxygen Evolution Reaction. Small 2018, 14, 1703514. [Google Scholar] [CrossRef] [PubMed]
  27. Numan, A.; Duraisamy, N.; Saiha Omar, F.; Mahipal, Y.K.; Ramesh, K.; Ramesh, S. Enhanced Electrochemical Performance of Cobalt Oxide Nanocube Intercalated Reduced Graphene Oxide for Supercapacitor Application. RSC Adv. 2016, 6, 34894–34902. [Google Scholar] [CrossRef]
  28. Kumbhar, V.S.; Jagadale, A.D.; Shinde, N.M.; Lokhande, C.D. Chemical Synthesis of Spinel Cobalt Ferrite (CoFe2O4) Nano-Flakes for Supercapacitor Application. Appl. Surf. Sci. 2012, 259, 39–43. [Google Scholar] [CrossRef]
  29. Yu, L.; Zhou, H.; Sun, J.; Qin, F.; Luo, D.; Xie, L.; Yu, F.; Bao, J.; Li, Y.; Yu, Y.; Chen, S.; Ren, Z. Hierarchical Cu@CoFe Layered Double Hydroxide Core-Shell Nanoarchitectures as Bifunctional Electrocatalysts for Efficient Overall Water Splitting. Nano Energy 2017, 41, 327–336. [Google Scholar] [CrossRef]
  30. Zhuang, L.; Ge, L.; Yang, Y.; Li, M.; Jia, Y.; Yao, X.; Zhu, Z. Ultrathin Iron-Cobalt Oxide Nanosheets with Abundant Oxygen Vacancies for the Oxygen Evolution Reaction. Adv. Mater. 2017, 29, 1606793-1–1606793-7. [Google Scholar] [CrossRef]
  31. Yan, W.; Bian, W.; Jin, C.; Tian, J.H.; Yang, R. An Efficient Bi-Functional Electrocatalyst Based on Strongly Coupled CoFe2O4/Carbon Nanotubes Hybrid for Oxygen Reduction and Oxygen Evolution. Electrochim. Acta 2015, 177, 65–72. [Google Scholar] [CrossRef]
  32. Yan, W.; Cao, X.; Tian, J.; Jin, C.; Ke, K.; Yang, R. Nitrogen/Sulfur Dual-Doped 3D Reduced Graphene Oxide Networks-Supported CoFe2O4 with Enhanced Electrocatalytic Activities for Oxygen Reduction and Evolution Reactions. Carbon N. Y. 2016, 99, 195–202. [Google Scholar] [CrossRef]
  33. Lee, S.; Kang, J.S.; Leung, K.T.; Lee, W.; Kim, D.; Han, S.; Yoo, W.; Yoon, H.J.; Nam, K.; Sohn, Y. Unique Multi-Phase Co/Fe/CoFe2O4 by Water–gas Shift Reaction, CO Oxidation and Enhanced Supercapacitor Performances. J. Ind. Eng. Chem. 2016, 43, 69–77. [Google Scholar] [CrossRef]
  34. Lv, L.; Xu, Q.; Ding, R.; Qi, L.; Wang, H. Chemical Synthesis of Mesoporous CoFe2O4 Nanoparticles as Promising Bifunctional Electrode Materials for Supercapacitors. Mater. Lett. 2013, 111, 35–38. [Google Scholar] [CrossRef]
  35. He, P.; Yang, K.; Wang, W.; Dong, F.; Du, L.; Deng, Y. Reduced Graphene Oxide-CoFe2O4 Composites for Supercapacitor Electrode. Russ. J. Electrochem. 2013, 49, 359–364. [Google Scholar] [CrossRef]
  36. Lu, X.; Zhao, C. Electrodeposition of Hierarchically Structured Three-Dimensional Nickel–iron Electrodes for Efficient Oxygen Evolution at High Current Densities. Nat. Commun. 2015, 6, 6616. [Google Scholar] [CrossRef]
  37. Gu, D.; Jia, C.-J.; Weidenthaler, C.; Bongard, H.-J.; Spliethoff, B.; Schmidt, W.; Schüth, F. Highly Ordered Mesoporous Cobalt-Containing Oxides: Structure, Catalytic Properties, and Active Sites in Oxidation of Carbon Monoxide. J. Am. Chem. Soc. 2015, 137, 11407–11418. [Google Scholar] [CrossRef]
  38. Yang, J.; Liu, H.; Martens, W.N.; Frost, R.L. Synthesis and Characterization of Cobalt Hydroxide, Cobalt Oxyhydroxide, and Cobalt Oxide Nanodiscs. J. Phys. Chem. C 2010, 114, 111–119. [Google Scholar] [CrossRef]
  39. Sagu, J.S.; Wijayantha, K.G.U.; Tahir, A.A. The Pseudocapacitive Nature of CoFe2O4 Thin Films. Electrochim. Acta 2017, 246, 870–878. [Google Scholar] [CrossRef]
  40. Yuan, C.; Wu, H.B.; Xie, Y.; Lou, X.W.D. Mixed Transition-Metal Oxides: Design, Synthesis, and Energy-Related Applications. Angew. Chemie Int. Ed. 2014, 53, 1488–1504. [Google Scholar] [CrossRef]
  41. Kargar, A.; Yavuz, S.; Kim, T.K.; Liu, C.H.; Kuru, C.; Rustomji, C.S.; Jin, S.; Bandaru, P.R. Solution-Processed CoFe2O4 Nanoparticles on 3D Carbon Fiber Papers for Durable Oxygen Evolution Reaction. ACS Appl. Mater. Interfaces 2015, 7, 17851–17856. [Google Scholar] [CrossRef] [PubMed]
  42. Shanmugavani, A.; Kalpana, D.; Selvan, R.K. Electrochemical Properties of CoFe2O4 Nanoparticles as Negative and Co(OH)2 and Co2Fe(CN)6 as Positive Electrodes for Supercapacitors. Mater. Res. Bull. 2015, 71, 133–141. [Google Scholar] [CrossRef]
  43. Bhoyate, S.; Kahol, P.K.; Sapkota, B.; Mishra, S.R.; Perez, F.; Gupta, R.K. Polystyrene Activated Linear Tube Carbon Nanofiber for Durable and High-Performance Supercapacitors. Surf. Coatings Technol. 2018, 345, 113–122. [Google Scholar] [CrossRef]
  44. Bhoyate, S.; Ranaweera, C.K.; Zhang, C.; Morey, T.; Hyatt, M.; Kahol, P.K.; Ghimire, M.; Mishra, S.R.; Gupta, R.K. Eco-Friendly and High Performance Supercapacitors for Elevated Temperature Applications Using Recycled Tea Leaves. Glob. Challenges 2017, 1, 1700063. [Google Scholar] [CrossRef] [Green Version]
  45. Bhoyate, S.; Mensah-Darkwa, K.; Kahol, P.K.; Gupta, R.K. Recent Development on Nanocomposites of Graphene for Supercapacitor Applications. Curr. Graphene Sci. 2017, 1, 26–43. [Google Scholar] [CrossRef]
  46. Adhikari, H.; Ghimire, M.; Ranaweera, C.K.; Bhoyate, S.; Gupta, R.K.; Alam, J.; Mishra, S.R. Synthesis and Electrochemical Performance of Hydrothermally Synthesized Co3O4 Nanostructured Particles in Presence of Urea. J. Alloys Compd. 2017, 708, 628–638. [Google Scholar] [CrossRef]
  47. Zhang, Y.X.; Hao, X.D.; Diao, Z.P.; Li, J.; Guan, Y.M. One-Pot Controllable Synthesis of Flower-like CoFe2O4/FeOOH Nanocomposites for High-Performance Supercapacitors. Mater. Lett. 2014, 123, 229–234. [Google Scholar] [CrossRef]
  48. Zhang, C.; Bhoyate, S.; Kahol, P.K.; Siam, K.; Poudel, T.P.; Mishra, S.R.; Perez, F.; Gupta, A.; Gupta, G.; Gupta, R.K. Highly Efficient and Durable Electrocatalyst based on Nanowires of Cobalt Sulfide for Overall Water Splitting. Chem. Nano Mat. 2018, 4, 1240–1246. [Google Scholar] [CrossRef]
  49. Zhang, C.; Bhoyate, S.; Hyatt, M.; Neria, B.L.; Siam, K.; Kahol, P.K.; Ghimire, M.; Mishra, S.R.; Perez, F.; Gupta, R.K. Nitrogen-Doped Flexible Carbon Cloth for Durable Metal Free Electrocatalyst for Overall Water Splitting. Surf. Coatings Technol. 2018, 347, 407–413. [Google Scholar] [CrossRef]
Catalysts 09 00176 g001 550
Figure 1. X-ray photoelectron spectroscopy (XPS) core level spectra of (a) Co 2p and (b) O 1s.
Figure 1. X-ray photoelectron spectroscopy (XPS) core level spectra of (a) Co 2p and (b) O 1s.
Catalysts 09 00176 g001
Catalysts 09 00176 g002 550
Figure 2. Scanning electron microscopy (SEM) images of electrodeposited CoFe2O4 on Ni-foam.
Figure 2. Scanning electron microscopy (SEM) images of electrodeposited CoFe2O4 on Ni-foam.
Catalysts 09 00176 g002
Catalysts 09 00176 g003 550
Figure 3. EDX elemental maps of electrodeposited CoFe2O4 on Ni-foam revealing the distribution of Co, Fe, and O.
Figure 3. EDX elemental maps of electrodeposited CoFe2O4 on Ni-foam revealing the distribution of Co, Fe, and O.
Catalysts 09 00176 g003
Catalysts 09 00176 g004 550
Figure 4. (a) Polarization curves, (b) Tafel slopes, (c) Nyquist plot at 0.5 V (vs. SCE), and (d) current density vs. scan rate plots for CoFe2O4 electrodes. RHE—reversible hydrogen electrode; CCC—carbonized cotton cloth.
Figure 4. (a) Polarization curves, (b) Tafel slopes, (c) Nyquist plot at 0.5 V (vs. SCE), and (d) current density vs. scan rate plots for CoFe2O4 electrodes. RHE—reversible hydrogen electrode; CCC—carbonized cotton cloth.
Catalysts 09 00176 g004
Catalysts 09 00176 g005 550
Figure 5. (a) Bending test and (b) chronoamperometry data for CoFe2O4 ED@NF in oxygen evolution reaction (OER) range.
Figure 5. (a) Bending test and (b) chronoamperometry data for CoFe2O4 ED@NF in oxygen evolution reaction (OER) range.
Catalysts 09 00176 g005
Catalysts 09 00176 g006 550
Figure 6. (a) Polarization and (b) chronoamperometry plots for overall water splitting of a two-electrode electrolyzer.
Figure 6. (a) Polarization and (b) chronoamperometry plots for overall water splitting of a two-electrode electrolyzer.
Catalysts 09 00176 g006
Catalysts 09 00176 g007 550
Figure 7. Variation of specific capacitance as a function of (a) scan rate and (b) current density for FeCo2O4 ED @ Ni-foam.
Figure 7. Variation of specific capacitance as a function of (a) scan rate and (b) current density for FeCo2O4 ED @ Ni-foam.
Catalysts 09 00176 g007

Share and Cite

MDPI and ACS Style

Zhang, C.; Bhoyate, S.; Zhao, C.; Kahol, P.K.; Kostoglou, N.; Mitterer, C.; Hinder, S.J.; Baker, M.A.; Constantinides, G.; Polychronopoulou, K.; et al. Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications. Catalysts 2019, 9, 176. https://doi.org/10.3390/catal9020176

AMA Style

Zhang C, Bhoyate S, Zhao C, Kahol PK, Kostoglou N, Mitterer C, Hinder SJ, Baker MA, Constantinides G, Polychronopoulou K, et al. Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications. Catalysts. 2019; 9(2):176. https://doi.org/10.3390/catal9020176

Chicago/Turabian Style

Zhang, Chunyang, Sanket Bhoyate, Chen Zhao, Pawan K. Kahol, Nikolaos Kostoglou, Christian Mitterer, Steven J. Hinder, Mark A. Baker, Georgios Constantinides, Kyriaki Polychronopoulou, and et al. 2019. "Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications" Catalysts 9, no. 2: 176. https://doi.org/10.3390/catal9020176

APA Style

Zhang, C., Bhoyate, S., Zhao, C., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M. A., Constantinides, G., Polychronopoulou, K., Rebholz, C., & Gupta, R. K. (2019). Electrodeposited Nanostructured CoFe2O4 for Overall Water Splitting and Supercapacitor Applications. Catalysts, 9(2), 176. https://doi.org/10.3390/catal9020176

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop