1. Introduction
The Gauss–Bonnet theorem and the definition of Gaussian curvature for surfaces which are non-horizontal in sub-Riemannian Heisenberg space
have been introduced by Diniz-Veloso in [
1]. The notion of Gaussian curvature for non-horizontal surfaces in sub-Riemannian Heisenberg space
was similar to Gauss curvature of surfaces in
with Hausdorff measure of area and particular normal to surface. The image of Gauss map was in the cylinder which has a radius of one. For Euclidean surface, which is
-smooth in the first Heisenberg group
, the suitable candidate for the definition of intrinsic Gaussian curvature has been given by Balogh–Tyson–Vecchi in [
2]. Taking advantage of these results, the Gauss–Bonnet theorem on Heisenberg group was proved. In M. Diniz and Z. Balogh [
1,
2], Gaussian curvature of surfaces and normal curvature of curves in surfaces in Heisenberg space
have been introduced respectively. In M. Veloso [
3], Veloso applied the above definitions respectively to prove that the Gauss–Bonnet theorem on Hesenberg groups
were not equal. Veloso then used the same formalism of reference [
1] to obtain the curvatures of reference [
2]. Using the obtained formulas, Gauss–Bonnet theorem in reference [
2] is possible as an application of Stokes theorem. In P. Gilkey [
4], P. Gilkey and J. H. Park use analytic continuation to derive the Chern–Gauss–Bonnet theorem for pseudo-Riemannian manifolds with boundary directly from the corresponding result in the Riemannian setting. In this paper, we will use similar methods to get the Gauss–Bonnet theorem in the Lorentzian Heisenberg group and the Lorentzian group of rigid motions of the Minkowski plane.
In Z. Balogh [
2], the scheme which is called Riemannian approximation scheme was gave. Moreover, the scheme depends on the choice of the complement to the horizontal distribution. In Z. Balogh [
2], the choice is rather natural in
. The existence of the limit of the intrinsic curvature of a surface is closely related to the cancellation of some divergent quantities in the limit. This cancellation is related to the specific choice of the frame bundle that is adapted on the surface. On the other hand, the cancellation stems from the symmetries that is of the underlying left-invariant group structure on the Heisenberg group.
In Z. Balogh [
2], they want to get to what extant similar phenomena hold in other spaces. In this paper, we have solved this question. In Y. Wang [
5], we study Gauss–Bonnet theorems in the affine group and the group of rigid motions of the Minkowski plane. The main results of this paper are Gauss–Bonnet type theorems for the spacelike surfaces and Lorentzian surfaces in Lorentzian Heisenberg group and the Lorentzian group of rigid motions of the Minkowski plane (see Theorems 2, 4, 6 and 8).
In Lorentzian Heisenberg group, we investigate the sub-Lorentzian limit of curvature of curves in
Section 2. Secondly, we study sub-Lorentzian limits of geodesic curvature of curves on Lorentzian surfaces, and give the Riemannian Gaussian curvature of surfaces in
Section 3. Moreover, we obtain sub-Lorentzian limits of geodesic curvature of curves on spacelike surfaces, and get the Riemannian Gaussian curvature of surfaces in
Section 4. On the other hand, we also get Gauss–Bonnet theorems in
Section 3 and
Section 4.
In the Lorentzian group of rigid motions of the Minkowski plane, we investigate the sub-Lorentzian limit of curvature of curves in
Section 5. We then give sub-Lorentzian limits of geodesic curvature of curves on Lorentzian surfaces, and obtain the Riemannian Gaussian curvature of surfaces and a Gauss–Bonnet theorem in
Section 6. In
Section 7, firstly, we study the sub-Lorentzian limit of curvature of curves. Secondly, we compute sub-Lorentzian limits of geodesic curvature of curves on spacelike surfaces and the Riemannian Gaussian curvature of surfaces. Moreover, we also get another Gauss–Bonnet theorem.
2. The Sub-Lorentzian Limit of Curvature of Curves in the Lorentzian Heisenberg Group
In this section, some basic notions in the Lorentzian Heisenberg group will be introduced. Let
be the first Heisenberg group. The non-commutative group law in
is given by
Let
then
and
Let
be the horizontal distribution on
. Let
Therefore,
. For
, where
L is a constant, let
be the Lorentzian metric on
. We call
a
Lorentzian Heisenberg group and write
instead of
. Therefore,
form an orthonormal basis on
with respect to
. Then
For a non-zero vector , is called to be , or if , or respectively. For , is called to be the norm of the vector . Let be a regular curve, where I is an open interval in . The regular curve is called a spacelike curve, timelike curve or null curve if is a spacelike vector, timelike vector or null vector at any , respectively.
We assume that
is the Levi–Civita connection with respect to
on
. Using the Koszul formula, we have
where
. Taking advantage of (3) and (4), we obtain
Lemma 1. Letbe Lorentzian Heisenberg group, then Definition 1. Letbe a-smooth curve. Iffor every, then γ is called regular. Moreover,is called a horizontal point of γ if As is well know, if is a curve with arc length parametrization, then the standard definition of curvature for in Riemannian geometry is . If is a curve with an arbitrary parametrization, then we give the definitions as follows:
Definition 2. Letbe a-smooth regular curve.
(1) Ifis a spacelike vector, we define the curvatureof γ atby(2) Ifis a timelike vector, we define the curvatureof γ atby Lemma 2. Letbe a-smooth regular curve. Ifis a spacelike vector, then In particular, ifis a horizontal point of γ, then Proof. Using (2), we get the following equation
Combining Lemma 1 and (10), we obtain
Using (10) and (11), we get
By Definition 2, (10) and (12), we get Lemma 2. □
Lemma 3. Letbe a-smooth regular curve. Ifis a timelike vector, then In particular, ifis a horizontal point of γ, then Proof. Similar to Lemma 2, combining (2) and Definition 2, (10) and (12), we obtain Lemma 3. □
Definition 3. Letbe a-smooth regular curve. The intrinsic curvatureof γ atis define asif the limit exists. The following notation is introduced: for
,
where
are continuous function.
Lemma 4. Letbe a-smooth regular curve. Ifis a spacelike vector and, then Proof. By (15), if
, then we get the following conclusions
Thus,
Using Definition 2, we have (16). By (9) and
, it further concludes that (17). If
and
, then
By (6), we get (18). □
Lemma 5. Letbe a-smooth regular curve. Ifis a timelike vector and, then Proof. By (15). Similar to Lemma 4. Using Definition 2, we have (19). Combining (14) and , we have (20). □
Example 1. Letbe Lorentzian Heisenberg group,be a-smooth regular curve, where I is a open interval inand. Letbe the Levi–Civita connection onwith respect toandBy (12), we haveandNow let us assume thatbe a-smooth regular curve and. Then we haveandTherefore, we haveIt implies thatis a spacelike vector and. By Lemma 2.7 (2.16), we have Definition 3 could use the example above to illustrate what it means, in the case where the limit exists.
3. Lorentzian Surfaces and a Gauss–Bonnet Theorem in the Lorentzian Heisenberg Group
A surface
is called regular if
is a
-smooth compact and oriented surface. In particular, we consider that there is a
-smooth function
such that
and
We will say that a point
is
characteristic if
. At local and away from characteristic points of
, we give our all computations.
If
, we say that
is a Horizontal spacelike surface. Let
. When
, then
. Then, we define
In particular,
. At every non-characteristic point, the functions above are well defined. Secondly, let
then
is the unit spacelike normal vector to
and
is the unit timelike vector,
is the unit spacelike vector.
are the orthonormal basis of
.
is called to be a Lorentzian surface in Lorentzian Hersenberg group.
Let . If be a -smooth timelike curve, then we define . If be a -smooth spacelike curve, then . Then and has the same orientation with .
We then define the projection by
. For every
, let
. Therefore, the Levi–Civita connection with respect to the metric
on
is define as
. Combining (12), (21) and
we have
Therefore, when
, we have
Definition 4. Letbe a regular Lorentzian surface. Letbe a-smooth regular curve.
(1) Ifis spacelike vectors, we define the geodesic curvatureof γ atby (2) Ifis timelike vectors, we define the curvatureof γ atby Definition 5. Letbe a regular Lorentzian surface. We assume thatis a-smooth regular curve. The intrinsic geodesic curvatureof γ atis defined as if the limit exists.
Lemma 6. Letbe a regular Lorentzian surface. Letbe a-smooth regular curve.
(1) Ifis a timelike vector, we have(2) Ifis a spacelike vector, then Proof. Combining (10) and
, then
Similarly, if
, then we have
By (23) and (30), we have
where
does not depend on
L. By Definition 4, (31)–(33), (27) holds.
If
and
, then
By (34)–(36) and Definition 4, we get .
If
and
, then
so (26) holds. □
Example 2. We assume that there exists a-smooth functionsuch thatThenLetSo we haveTherefore,, sois a Horizontal spacelike surface. By (20), we haveBy (21), we haveThen,,
. Thus, it is concluded that Σ
is a Lorentzian surface in Lorentzian Hersenberg group. Letbe the circle centered at the origin on. Byand, we haveBy (23), we haveThenIf, then. In this case,. Then we haveis a timelike vector. By Lemma 6 (27), we have at the point θ which satisfiesWe know that we do not usein the Gauss–Bonnet theorem. Definition 6. Letbe a regular surface. We assume thatis a-smooth regular curve. We define the signed geodesic curvatureof γ atby Definition 7. Letbe a regular surface. Letbe a-smooth regular curve. We define the intrinsic geodesic curvatureof γ at the non-characteristic pointto beif the limit exists. Lemma 7. Letbe a regular Lorentzian surface.
(1) Ifbe a timelike-smooth regular curve, thenand(2) Letbe a spacelike-smooth regular curve, thenand Proof. For (1), by (30), we have
By (23) and (41), we have
If
and
then
So
If
and
, then
So (39) holds. Similarly, we have (2). □
Example 3. We takeandas in the Example 2. ThenBy (30), we haveThenSo we have when, thenfor the large L and we haveis a spacelike vector. If, by Lemma 7 (2), we have In the Lorentzian Heisenberg space, we then investigate the sub-Lorentzian limit of the Riemannian Gaussian curvature of surfaces. The
second fundamental form of the embedding of
into
is defined by
Similarly to Theorem 4.3 in [
6], we have
Theorem 1. For the embedding of Σ
into , the second fundamental form of Σ is given by We define the mean curvature
of
by
The curvature of a connection
∇ is defined as
Taking advantage of the Gauss equation, we obtain
Proposition 1. The horizontal mean curvatureofaway from characteristic points is the following form: By Lemma 1 and (48), then we get the following lemma.
Lemma 8. Letbe the Lorentzian Heisenberg space, then Proposition 2. Away from characteristic points, we have the following assertionwhere Proof. By (21), we have
By Lemma 8, we have
By (46) and
we get
By (48), (55), (56) we get (52). □
For the case of a spacelike curve , the Riemannian length measure is defined as
Lemma 9. Letbe a-smooth spacelike curve. LetThen,If, thenIf, then Proof. Since
, similar to the proof of Lemma 6.1 in [
2], (58) holds. If
, then
By the Taylor expansion, (59) holds. Combining the definition of
and
, (60) holds. □
Proposition 3. Letbe a regular Lorentzian-smooth surface. Letdenote the surface measure on Σ
with respect to the Lorentzian metric . LetThenIf withthen Proof. We know that
so
Then,
By
and the Taylor expansion
we obtain (58). Using (2), then we get
and
Let
We know that
by the dominated convergence theorem, (64) holds. □
Theorem 2. (The Gauss–Bonnet theorem for the Lorentzian surface in) Letbe a regular Lorentzian surface. We assume that Σ
is with finitely many boundary components , given by -smooth regular and closed spacelike curves . Let the characteristic set be the empty set. Suppose that A is defined by (53) and is defined by (61) and is the sub-Lorentzian signed geodesic curvature of relative to Σ.
Thus Proof. By the discussions in [
2], suppose that all points satisfy
on
. Therefore, using Lemma 7, we obtain
By the Gauss–Bonnet theorem (see [
4] page 90 Theorem 1.4), we have
Therefore, by (71), (72), (60), (53), (61), we get
Let
L go to the infinity. By the dominated convergence theorem, (69) holds. □
4. Spacelike Surfaces and a Gauss–Bonnet Theorem in the Lorentzian Heisenberg Group
The geodesic curvature of spacelike curves on spacelike surface in the Lorentzian Heisenberg group is investigated in this section.
Let
Let
, when
, we have
. We then define
In particular,
. At every non-characteristic point, the functions above are well defined. Let
then
is the unit timelike normal vector to
,
and
is the unit spacelike vector.
are the orthonormal basis of
. We call
a spacelike surface in Lorentzian Hersenberg group. We define a linear transformation on
by
and the transformation is well defined.
We then define the projection by
. For every
, let
. Therefore, the Levi–Civita connection with respect to the metric
on
is defined as
. Combining (14), (74) and
we have
When
, then
Definition 8. Letbe a regular spacelike surface. Letbe a-smooth regular curve, we define the geodesic curvatureof γ atby Definition 9. Letbe a regular spacelike surface. Letbe a-smooth regular curve. The intrinsic geodesic curvatureof γ atis defined as if the limit exists.
Lemma 10. Letbe a regular spacelike surface. Letbe a-smooth spacelike curve, then we have the following assertions Proof. By (10) and
, we have
By (78), we have
Similarly, if
,
By (78) and (82), we have
where
does not depend on
L. Combining (79), (83)–(85), (80) holds.
If
and
, then
By (86)–(88) and (79),
holds.
If
and
, then
so we get (81). □
Lemma 11. Letbe a regular spacelike surface. Letbe a-smooth spacelike curve, then Proof. By (75) and (82), we have
By (77) and (92), we have
Therefore, (91) holds. If
and
then
So
If
and
, then
So (89) holds. □
In the Lorentzian Heisenberg group, the sub-Lorentzian limit of the Riemannian Gaussian curvature of spacelike surfaces is investigated next. The
second fundamental form of the embedding of
into
is defined as:
Similarly to Theorem 4.3 in [
6], we have
Theorem 3. For the embedding of Σ
into , the second fundamental form of Σ
is Proof. Combining
and
By direct calculation, we obtain
Since
, we get
. Then
Similarly, we have
Thus, (98) holds. □
By the Gauss equation, we have
Proposition 4. The horizontal mean curvatureofaway from characteristic points is Proposition 5. Away from characteristic points, we get the following assertionwhere Proof. By (21), we have
By Lemma 8, we have
By (98) and
we get
By (99), (104) and (105), we get (101). □
Proposition 6. Letbe a spacelike-smooth surface. We assume thatis the surface measure on Σ
with respect to the metric . Suppose thatThen, Proof. We know that
so
Then,
By
and the Taylor expansion
so (109) holds. □
Theorem 4. (The Gauss–Bonnet theorem for the spacelike surface in the Lorentzian Heisenberg group) Letbe a regular spacelike surface. We assume that Σ
is with finitely many boundary components , given by -smooth regular and closed curves . Let the characteristic set be the empty set. Suppose that A is defined by (102) and is defined by (106) and is the sub-Lorentzian signed geodesic curvature of relative to Σ.
Thus, we get Proof. By the discussions in [
2], we may assume that there is no points satisfying
and
on
. Using Lemma 11, we get
By the Gauss–Bonnet theorem, we obtain
So by (59), (60), (101), (109), (112) and (113), we get
Let
L go to the infinity. By the dominated convergence theorem, (110) holds. □
5. The Sub-Lorentzian Limit of Curvature of Curves in the Lorentzian Group of Rigid Motions of the Minkowski Plane
Let
be the group of rigid motions of the Minkowski plane.
is a unimodular Lie group with a natural sub-Lorentzian structure. For the reason of studying
, we choose the underlying manifold
as a model of
. On
, let
Then,
and
Let
be the horizontal distribution on
. Let
Then
. For
, let
be the Riemannian metric on
, where
L is a constant. We call
the Lorentzian group of rigid motions of the Minkowski plane and write
instead of
. Then
are orthonormal basis on
with respect to
. Therefore,
A non-zero vector is called to be , or if , or respectively. We define the norm of the vector by .
Let be a regular curve, where I is an open interval in . The regular curve is called a spacelike curve, timelike curve or null curve if is a spacelike vector, timelike vector or null vector at any , respectively.
We assume that is the Levi–Civita connection on with respect to . Using the Koszul formula and (116), we have
Lemma 12. We assume thatis the Lorentzian group of rigid motions of the Minkowski plane. Thus, Definition 10. Letbe a-smooth curve.is called a horizontal point of γ when Similar to the Definitions 2 and 3, and for the Lorentzian group of rigid motions of the Minkowski plane can be defined, then we obtain
Lemma 13. Suppose thatis a-smooth regular curve in the Riemannian manifold.
(1) Ifis a spacelike vector, then(2) Ifis a timelike vector, then Proof. Using (115), we get
Combining Lemma 12 and (123), we obtain
Combining (123) and (124), we have
By (123) and (125), if
, then
Thus,
So using (6), we get (118) and (121). Combining (123), (125), (6) and
and
, (119) and (122) hold. If
and
, then
By (6), we get (120). □
6. Lorentzian Surfaces and a Gauss–Bonnet Theorem in the Lorentzian Group of Rigid Motions of the Minkowski Plane
For a regular surface
and regular curve
, suppose that there is a
-smooth function
such that
Similar to
Section 3, we define
,
. We call
a Lorentzian surface in the Lorentzian group of rigid motions of the Minkowski plane.
By (22) and (125), we have
Combining (123) and
, we obtain
We have
Lemma 14. Letbe a regular Lorentzian surface. Letbe a-smooth regular curve.
(1) Ifis a timelike vector, then(2) Ifis a spacelike vector, then Proof. Using (126), we get
Using (127), if
,
Combining (126) and (127), we get
where
does not depend on
L. Using Definition 4 and (130)–(132), (128) holds. If
and
, we obtain
By (133)–(135) and Definition 4, we obtain
. If
and
, then
so we get (129). □
Lemma 15. Letbe a regular Lorntzian surface.
(1) Ifbe a timelike-smooth curve, thenand(2) Ifbe a spacelike-smooth curve, thenand Proof. For (1), by (22) and (127), we have
Combining (126) and (139), we have
If
and
then
So
If
and
, then
Therefore, (137) holds. □
In the Lorentzian group of rigid motions of the Minkowski plane, the sub-Lorentzian limit of the Riemannian Gaussian curvature of surfaces is computed nextly. Similarly to Theorem 4.3 in [
6], we obtain
Theorem 5. The second fundamental formof the embedding ofintois given bywhere Proof. Combining
and
By direct calculation, we obtain
Since
, we get
. Then
Similarly, we have
Thus, (143) holds. □
Similar to Proposition 1, we have
Proposition 7. The horizontal mean curvatureofaway from characteristic points is By Lemma 12, we have
Lemma 16. We assume thatis the Lorentzian group of rigid motions of the Minkowski plane. Then Proposition 8. Away from characteristic points, we have Proof. Combining (54) and Lemma 16, we have
Similar to (58), we obtain
Combining (147) and (148), (146) holds. □
Similar to (59) and (62), for the Lorentzian group of rigid motions of the Minkowski plane. We assume that
is a spacelike
-smooth curve, then we get
Combining (146), (149) and Lemma 15, similar to the proof of Theorem 2, we have
Theorem 6. (Gauss–Bonnet theorem for the Lorentzian surface in) We assume thatis a regular Lorentzian surface. Letbe with finitely many boundary components, given by-smooth regular and closed spacelike curves. Let the characteristic setsatisfyandbe locally summable with respect to the 2-dimensional Hausdorff measure near the characteristic set, then we get 7. Spacelike Surfaces and a Gauss–Bonnet Theorem in the Lorentzian Group of Rigid Motions of the Minkowski Plane
For a regular surface
and regular curve
, suppose that there is a
-smooth function
such that
Similar to
Section 4, we give
,
. We call
a spacelike surface in the Lorentzian group of rigid motions of the Minkowski plane. By (125), we have
By (121) and
, we have
We have
Lemma 17. Letbe a regular Lorentzian surface. Letbe a-smooth spacelike curve, then Proof. Using (152), we obtain
Using (153), if
,
By (152) and (153), we have
where
does not depend on
L. By Definition 4, (156)–(158), we have (154). If
and
, then
and
By (159)–(161) and Definition 4, we obtain
. If
and
, then
so (155) holds. □
Lemma 18. Letbe a regular Lorentzian surface. Letbe a spacelike-smooth regular curve, then Proof. By (75) and (153), we have
Combining (152) and (164), we have
Therefore, we get (163). If
and
then
So
If
and
, then
So (162) holds. □
In the Lorentzian group of rigid motions of the Minkowski plane, the sub-Lorentzian limit of the Riemannian Gaussian curvature of surfaces is computed. Similarly to Theorem 4.3 in [
6], we have
Theorem 7. For the embedding ofinto, the second fundamental formofiswhere Similar to Proposition 1, we have
Proposition 9. The horizontal mean curvatureofaway from characteristic points is Proposition 10. Away from characteristic points, we have Proof. By (103) and Lemma 16, we have
Similar to (148), we have
Combining (171) and (172), (170) holds. □
Similar to (61) and (111), for the Lorentzian group of rigid motions of the Minkowski plane, we assume that
is a spacelike
-smooth curve, then we obtain
Combining (170), (173) and Lemma 18, similar to the proof of Theorem 4, we have
Theorem 8. (Gauss–Bonnet theorem for the spacelike surface in) We assume thatis a regular spacelike surface. Letbe with finitely many boundary components, given by-smooth regular and closed spacelike curves. Let the characteristic setbe the empty set. Suppose thatis defined by (106) andis defined by (57) andis the sub-Lorentzian signed geodesic curvature ofrelative to.
where 8. Conclusions
This work has addressed the interesting question of Gauss–Bonnet type theorems in other spaces, especially in Lorentzian Heisenberg group and the Lorentzian group of rigid motions of the Minkowski plane. In Lorentzian Heisenberg group, the main results of this paper are Theorem 2, Theorem 4, which are Gauss–Bonnet type theorem for the Lorentzian surfaces and Gauss–Bonnet type theorem for the spacelike surfaces, respectively.
On the other hand, in the Lorentzian group of rigid motions of the Minkowski plane, the main results of this paper are Theorem 6 and Theorem 8, which are Gauss–Bonnet type theorem for the Lorentzian surfaces and Gauss–Bonnet type theorem for the spacelike surfaces, respectively.