Correction: Khan et al. Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan. Buildings 2021, 11, 276

1. Additional Affiliation

In the published paper [1], the additional affiliation of the home university was missing for Nisar Ali Khan. In addition to affiliation 1, 2 should be Department of Civil Engineering, Faculty of Engineering & Technology, International Islamic University, Sector H-10, Islamabad 44000, Pakistan.

2. Missing a Term “$t_w$” in Equation (1)

There was a mistake in the original publication, in Equation (1); the term “$t_w$” is missing in Equation (1).

The correct equation is as follows:

$${\lambda }_h=h_c{\left[\frac{E_m·t_w· \sin 2\theta }{4E_c· I_c· h_w}\right]}^{\frac{1}{4}}$$

(1)

3. Text Correction

There was an error in the original publication in the Section 2.1; after Equation (4), the word “diagonal” should be deleted. The correct sentence is as follows: where, $f_w$, $t_w$, and $w_w$ are the compression strength of the masonry wall, wall thickness, and strut width, respectively.

The authors apologize for any inconvenience caused and would like to clarify that the scientific conclusions are unaffected. The original publication has also been updated.