Next Article in Journal
Immunoexpression of Macroh2a in Uveal Melanoma
Previous Article in Journal
Applying Eye-Tracking Technology to Measure Interactive Experience Toward the Navigation Interface of Mobile Games Considering Different Visual Attention Mechanisms
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Applied Sciences
Volume 9
Issue 16
10.3390/app9163243
applsci-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds

by
Mattia Bartoli
1,
Luca Rosi
1,*,
Benedetta Mini
1,
Giorgio Petrucci
1,
Elisa Passaglia
2 and
Marco Frediani
1,*
1
Department of Chemistry “Ugo Schiff”, University of Florence, Via della Lastruccia 3–13, 50019 Sesto Fiorentino, Italy
2
Italian National Council for Research - Institute for the Chemistry of OrganoMetallic Compounds, Secondary Station of Pisa (CNR-ICCOM SS Pisa), Via Moruzzi 1, 56124 Pisa, Italy
*
Authors to whom correspondence should be addressed.
Appl. Sci. 2019, 9(16), 3243; https://doi.org/10.3390/app9163243
Submission received: 27 June 2019 / Revised: 24 July 2019 / Accepted: 7 August 2019 / Published: 8 August 2019
(This article belongs to the Section Chemical and Molecular Sciences)
Browse Figures
Review Reports Versions Notes

Abstract

:
The synthesis of a bipyridine poly(lactic acid) carboxylic end-capped macroligand coordinated to a platinum center was reported. The reaction between the metal ion and the polymeric ligand was run in a very efficient way through a one-step synthesis and the complex was tested for selective hydrogenation of α,β-carbonyl compounds. High selectivity was proven for double bond hydrogenation of 2-cyclohexen-1-one (up to 99%) and the production of 1-butanol from (E)-but-2-enal. Moreover, the catalytic system was still active after three catalytic cycles.

Graphical Abstract

1. Introduction

The development of new catalysts is one of the breakthroughs of applied chemistry [1]. In the field of catalysis, hydrogenation plays a relevant role because this kind of process is largely used in the oil [2,3,4] and pharmaceutical [5,6] industries for refining or synthetic purposes. Furthermore, great interest has also been devoted to enantio [7] and chemo [8] selective conversions. Among all substrates, the multifunctional ones are quite challenging due to the possibility of the simultaneous transformation of one or all of the functionalities present. This normally induces a severe decrement of the hydrogenation selectivity and an interesting case study is represented by the α,β-unsaturated carbonyl compounds [9]. Over the years, several systems have been developed for the selective hydrogenation of these substrates based on a plethora of metal frameworks (i.e., Cu [10], Au [11], Ni [12], Rh [13], Ru [14], Pd [15], and Pt [16,17]) with the aim to obtain a selective reduction of carbon–carbon or carbon–oxygen double bond or both. Among all available catalysts, noble metal based nanoparticles have astonishing properties of selectivity but still require a complex multi-step synthesis [18,19,20,21]. Recently, Bartoli et al. [22] proposed a new approach focused on the use of palladium bonded to a poly(lactic acid) macroligand. The catalytic system showed the same time advantages of a homogenous catalyst and the easy recyclability of a heterogeneous one. The use of Pd containing poly(lactic acid) systems is a well-established practice for selective hydrogenation of carbon–carbon double bonds [23,24,25], achieving great results for its selectivity and reusability.
In this paper, the use of a carboxylic end-capped poly(lactic acid) called macroligand was employed for the synthesis of platinum-based recyclable catalysts. The catalytic system was tested for selective hydrogenation of α,β-unsaturated carbonyl compounds under several conditions to extend the use of macrocyclic ligands to the synthesis of other transition metal-containing catalysts.

2. Materials and Methods

2.1. Materials and Instrumentations

2-Cyclohexen-1-one, (E)-but-2-enal, dry CH2Cl2 (≥99%), n-hexane (≥98%), acetonitrile (≥99%), chloroform (≥99%), deuterochloroform (CDCl3, 100%, 99.9 D) toluene (≥99%), hexadeuterodimethylsulfoxide (DMSO-d6, 100%, 99.9 D), THF (HPLC grade, ≥99.8%), and PtCl2 were purchased from Aldrich. l-lactide was purchased from Purac. 4-Methyl-4′-(hydroxymethyl)-2,2′-bipyridine (Bipy) was purchased from Imperial Chemical Industries(I.C.I. )(≥99.8%).
GC analyses were carried out on a Shimadzu 2010 (VFWAX column 30 m × 0.25 mm × 0.25 μm) and GC-MS analyses were run using a Shimadzu GC-MS QP5050A (Petrocol™ column 100 m × 0.25 mm × 0.5 μm).
NMR analyses were performed with a Varian model GEMINI 400 MHz using CDCl3 or DMSO-d6 as the solvent. Integral errors were ±5%.
GPC analyses were carried out with a Waters model binary HPLC 1525 system equipped with three columns (Shodex KF-802.5, KF-803, KF-804) and a refractive index detector Wyatt T-REX Optilab. Analyses were performed with THF as the eluant.
UV–Vis analysis was carried out using a Varian model Cary 4000 UV–Vis spectrophotometer.
Fourier transform infrared spectroscopy (FTIR) was performed using a Shimadzu model IR Affinity-1, equipped with a Golden Gate single reflection diamond ATR accessory supplied by Specac.
Elemental analysis was carried out using a Perkin-Elmer 240 CHN model.
Differential calorimetric analyses were carried out using a Perkin Elmer Pyris-1-dsc. Samples were tested from 40 °C to 180 °C with a heating rate of 10 °C/min.
Catalytic reactions: Homogeneous catalytic hydrogenations of α,β-unsaturated substrates were carried out in a 150 mL stainless steel homemade autoclave thermostated in an oil bath (±1 °C) containing a glass vessel. The substrate, solvent, and catalyst were introduced in the glass vessel, under a nitrogen atmosphere, then the autoclave was closed. The autoclave was pressurized at room temperature with hydrogen, then stirred and heated at the prefixed temperature for the established time. At the end of the reaction, the autoclave was rapidly cooled to room temperature, the gas vented, and the solution collected and transferred into a 50 mL Schlenk tube. A sample of the solution was taken for the GC and GC-MS analyses. Each test was repeated three times, and the mean value was reported.

2.2. Synthesis of Macroligand, Macrocomplex, and Reference Catalyst

2.2.1. Synthesis of Macroligand PLLA-Bipy

In a Schlenk tube, l-lactide (4.00 g, 28.0 mmol) was heated at 135 °C under a nitrogen atmosphere in the presence of Sn(Oct)2 (56.3 mg, 0.139 mmol) and Bipy (0.400 mmol) for 3 h. Afterward, the reaction mixture was allowed to cool to room temperature and residual crystalline l-lactide, which sublimated during the reaction, was removed mechanically from the Schlenk tube. The crude reaction product was then dissolved in CH2Cl2 (20 mL) and precipitated upon the addition of n-hexane (30.0 mL), giving an off-white solid powder, which was separated from the solution by filtration, washed several times with n-hexane, and dried in vacuum at room temperature for 12 h.
1H-NMR (CDCl3, 400 MHz, ppm): δ = 8.67 (d, 1H, J = 1.7 Hz, H 6′), 8.53 (d, 1H, J = 1.7 Hz, H 6), 8.52 (s,1H, H 3), 8.23 (s,1H, H 3′), 7.21 (d, 1H, J = 2.1 Hz, H 5′), 7.19 (d, 1H, J = 2.6 Hz, H 5), 5.29 (s, 2H, CH2 on C4 of Bipy), 5.24–4.96 (bs, 135 CH, in chain), 4.37 (q, 1H, J = 2.3 Hz, CH end chain), 2.47 (s, 3H, CH3 of Bipy), 1.86–1.05 (bs, 406, CH3 PLA).
FT-IR (cm−1): 3007–2953 (w, νCH), 1748 (s, νCO), 1452 (m, νasHCH), 1382 (m, νCH), 1359 (m, νHCH), 1180 (s, νasCOC), 1128–1043 (s, νCO), 995 (w, νCCH3), 871 (m, νOCC).
Molecular weight (g/mol): 11,590, Polydispersity index: 1.9, Yields (wt.%): 93, Tg: 55 °C, Tf: 161 °C.

2.2.2. Synthesis of the Macrocomplex Pt(PLLA-Bipy)Cl2

In a single neck round bottom flask, PLLA-Bipy (2.00 g, 0.14 mmol) and PtCl2 (45 mg, 0.17 mmol) were dissolved in acetonitrile (20 mL) and refluxed for 16 h. Afterward, the reaction mixture was cooled to room temperature and the crude reaction product was recovered through filtration and washed three times with n-hexane. The yellow powder was dried in vacuum at room temperature for 12 h.
1H-NMR (CDCl3, 400 MHz, ppm): δ = 9.70 (d, 1H, J = 1.7 Hz, H 6′), 9.54 (d, 1H, J = 1.7 Hz, H 6), 7.95 (s, 1H, H 3), 7.91 (s, 1H, H 3′), 7.42 (d, 1H, J = 2.1 Hz, H 5′), 7.37 (d, 1H, J = 2.6 Hz, H 5), 5.29 (s, 2H, CH2 on C4 of Bipy), 5.26–5.05 (bs, 133CH, CH in chain), 4.37 (q, 1H, J = 2.3 Hz, CH end chain), 2.47 (s, 3H, CH3 of Bipy), 1.86–1.05 (bs, 400 CH3 end chain of PLA).
FT-IR (cm−1): 3012–2956 (w, νCH), 1749 (s, νCO), 1456 (m, νasHCH), 1384 (m, σCH3), 1359 (m, νHCH), 1182 (s, νasCOC), 1130–1041 (s, νCO), 966 (w, νCCH3), 871 (m, νOCC).
Yields (wt.%): 57 Tg: 59 °C Tf: 166 °C.

2.2.3. Synthesis of the Complex Pt(Bipy)Cl2

In a single neck round bottom flask, Bipy (80.0 mg, 0.4 mmol) and PtCl2 (104 mg, 0.4 mmol) were dissolved in acetonitrile (20 mL) and refluxed for 16 h. Afterward, the reaction mixture was cooled to room temperature and the crude reaction product was recovered through filtration and washed three times with n-hexane. The yellow powder was dried in vacuum at room temperature for 12 h.
1H-NMR (DMSO, 400 MHz, ppm): δ = 9.16 (d, 1H, H6′, J = 1.5 Hz), 8.92 (d, 1H, H6, J = 1.2 Hz), 8.48 (s, 1H, H3′), 8.42 (s, 1H, H3), 7.43 (d, 1H, H5, J = 1.2 Hz), 7.19 (d, 1H, H5′, J = 1.5 Hz), 4.61 (s, 2H, CH2), 3.65 (OH), 2.36 (s, 3H, CH3).
13C-NMR (DMSO, 75 MHz, ppm): δ = 157.3 (s, C 4′), 153.1 (s, C 2,2′), 148.4 (s, C 6,6′), 147.8 (s, C 4), 128.5 (s, C 3), 125.1 (s, C 3′), 124.7 (s, C 5′), 121.2 (s, C5), 61.7 (s, CH2), 21.5 (s, CH3).
FT-IR (cm−1): 3421 (bs, νOH), 3066 (w, νCH aromatic), 2897 (w, νCH aliphatic), 1616 (s, νC=C), 1427 (s, ring breathing mode), 1056 (s, νCO).
Elemental analysis found (calc.): C: 29.59% (30.91%), H 3.32% (2.59%), N 5.95% (6.01%).
Yields (wt.%): 57.6.

2.3. Catalytic Experiments

All the catalytic reactions were run with the formation of products according to the reaction scheme reported in Figure 1.
Experiments were carried out using the apparatus reported in the experimental methods using the conditions reported in Table 1. A 10 mL glass vessel was charged, under a nitrogen atmosphere with I or IV as the substrate (2.7 mmol), the catalyst (0.0027 mmol catalyst), and toluene (5 mL). The reactor was then pressurized with hydrogen and heated at 60 °C for the prefixed time, then cooled at room temperature. The reaction mixture was analyzed as above described. After three catalytic cycles, the catalyst was recovered by filtration and characterized.

3. Results

3.1. Platinum Containing Poly(Lactic Acid) Macrocomplex

Synthesis of bipyridine carboxylic end-capped poly(lactic acid) ligand is an advantageous procedure for the production of several molecular architectures [26]. In this work, the synthesis of Pt(PLLA-Bipy)Cl2 was reported, according to the scheme reported in Figure 2.
Synthesis of the ligand with carboxylic end-capped functionalization was proven by the presence of aromatic signals of Bipy in the region between 8.7–7.4 ppm (Figure 3a).
The formation of the platinum macromplex was detectable by 1H-NMR spectra, through a comparison of spectra (a) and (b) as reported in Figure 3. The formation of the Pt complex did not affect the number of lactic acid unities in the ligand because the reaction conditions were quite soft. The difference between hydrogen numbers was imputable to several issues: the first and the main relevant among them is the integral processing of the signals that were affected by noise and baseline correction. A% error in integral evaluations was reported in the experimental. Considering these points, the data for the macromplex and the macroligand are in good agreement among them. For a more precise molecular weight and fragment numbers, the value obtained from GPC analysis must be considered. After the coordination of the platinum ion, signals of aromatic hydrogen shifted to a higher ppm (Figure 3b) when compared with the non-coordinated ligand (Figure 3a). This behavior was in agreement with similar results observed for palladium coordination [26]. This phenomenon is due to the reduction of charge density on the aromatic ring caused by the modification of the π-orbitals of the Bipy due to the interaction of the electron doublet on the nitrogen atoms with the platinum orbital system as described by several theoretical studies [27,28]. Thermal properties of the complex were in good agreement with those previously reported for functionalized poly(lactic acid) [29].
The effect of orbitals interactions was also appreciable in the UV–Vis spectra reported in Figure 4. Pt(PLLA-Bipy)Cl2 (c) and Pt(Bipy)Cl2 (a) showed a maximum absorption at 287 nm and a secondary absorption at 314 and 384 nm while PLLA-Bipy (b) showed only the absorption at 287 nm. Additional absorption bands were an evident proof of the coordination of Pt to Bipy moieties, in agreement with the NMR spectra above reported.

3.2. Catalytic Experiments

The most important advantage for the use of Pt(PLLA-Bipy)Cl2 is the lack of solubility in the reaction medium at room temperature, while it was completely soluble under catalytic conditions (see Figure 5). This behavior, known as the “ponytail” effect, allows catalysis to be carried out in the homogeneous phase while the catalyst may be easily separated at the end of the process as a heterogeneous system. In contrast, the Pt(Bipy)Cl2 complex did not show this property.
Catalytic performances of Pt(PLLA-Bipy)Cl2 and Pt(Bipy)Cl2 were tested under different conditions of time and pressure as shown in Table 1.
First, Pt(Bipy)Cl2 was tested as a reference catalyst to evaluate its behavior in the hydrogenation of 2-cyclohexen-1-one as a model substrate. The results of ID 1 showed the total inactivity of this catalyst as shown by the absence of hydrogenation products after catalysis. In contrast, the reaction performed in the presence of Pt(PLLA-Bipy)Cl2 as the catalyst achieved a conversion of 73% and a total selectivity for the reduction of the carbon–carbon double bond in the same conditions. After increasing the reaction time from 3 to 6 h, the catalytic performances of Pt(PLLA-Bipy)Cl2 reached a conversion of 99% with a total selectivity toward the reduction of carbon–carbon unsaturation (ID3). The catalyst was still active and selective after three catalytic cycles, although the conversion dropped to 39%. This was probably due to the formation of higher hindered [Pt(PLLA-Bipy)Cl2]2 (Figure 6) instead of a merely Pt leaching, according to a theoretical study reported by Kawanishi et al. [30]. This hypothesis was supported by the NMR spectra of the recovered catalysts (Figure 3c), where the resonances of the Bipy ligands slightly shifted and the spectrum did not show any signal of free Bipy. A further increment of hydrogen pressure from 1.1 to 2.2 MPa gave a conversion of 95% with total selectivity. Under these conditions, the catalyst deactivation after three catalytic runs was the same as ID4. This result supports the deactivation mechanism above-mentioned and exclude the formation of nanoparticles that are more active than molecular complexes [31].
The solubility of the catalytic system Pt(PLLA-Bipy)Cl2 is very different from the behavior of other heterogeneous systems previously described [32,33] as it acts as a non-supported catalyst during the reaction, leaving the C=O functionality untouched.
Different results were obtained in the hydrogenation of (E)-but-2-enal using the complex Pt(PLLA-Bipy)Cl2 in the same conditions of the previously reported experiments. In these tests, a conversion of 96–97% was reached using a reaction time of 6 h and a hydrogen pressure of 2.2 MPa (ID7 and ID8). During the hydrogenation of an α,β-unsaturated aldehyde, a remarkable selectivity was achieved toward the complete hydrogenation of the C=C double bond, but also of the -CHO group with the formation of 1-butanol (selectivity 88–89%) and butanal (selectivity 3–4%).
The different products formed during the two hydrogenations may be attributed to the high reactivity of the aldehydic group (-CHO) of (E)-but-2-enal if compared with the carbonyl group (=CO) of 2-cyclohexen-1-one.
In the hydrogenation of (E)-but-2-enal the recyclability of the catalyst was very high, and the conversion was reduced by only 5% after three catalytic cycles.

4. Conclusions

In this research, the possibility of realizing the synthesis of bipyridine carboxylic end-capped poly(lactic acid) based macroligand was reported. The macroligand was used for the synthesis of a platinum-containing macrocomplex through a facile one-step coordination procedure The new Pt macrocomplex showed high activity and selectivity for the hydrogenation of the carbon–carbon double bond of 2-cyclohexen-1-one to the corresponding saturated ketone. In contrast, in the hydrogenation of (E)-but-2-enal, a very promising selectivity toward the formation of 1-butanol (up to 89%) was achieved.
Furthermore, the catalyst was easily recycled even if it underwent a partial deactivation, especially in the reduction of cyclohexanone, while it remained almost constant after three catalytic runs in the hydrogenation of (E)-but-2-enal.

Author Contributions

Conceptualization: M.B., L.R., and M.F.; Methodology: B.M., M.B., L.R., and G.P.; Formal analysis: B.M., G.P., and E.P.; Resources: L.R. and M.F.; Writing—original draft preparation: M.B.; Writing—review and editing: L.R., M.F., and E.P.; Supervision: M.F.; Funding Acquisition: M.F.

Funding

This research received no external funding

Acknowledgments

We thank MIUR-Italy (“Progetto Dipartimenti di Eccellenza 2018–2022” allocated to the Department of Chemistry “Ugo Schiff”).

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. Leach, B. Applied Industrial Catalysis; Elsevier: Amsterdam, The Netherlands, 2012. [Google Scholar]
  2. Pevere, E.F.; Vermillion, H.E. Recovery of Viscous Crude Oil. Google Patents. U.S. Patents No. 2,857,002, 21 October 1958. [Google Scholar]
  3. Kodera, Y.; Kato, J.; Ohse, H.; Ohshima, S.; Shimada, K.; Suzuki, M.; Kiriki, Y. Hydrogenation Treatment of Hydrocarbon Oil. Google Patents. U.S. Patents No. 3,716,478, 1973. [Google Scholar]
  4. Scherzer, J.; Gruia, A.J. Hydrocracking Science and Technology; CRC Press: Boca Raton, FL, USA, 1996. [Google Scholar]
  5. Nairoukh, Z.; Wollenburg, M.; Schlepphorst, C.; Bergander, K.; Glorius, F. The formation of all-cis-(multi) fluorinated piperidines by a dearomatization–hydrogenation process. Nat. Chem. 2019, 11, 264. [Google Scholar] [CrossRef] [PubMed]
  6. Campeau, L.-C.; Fogg, D.E. The Roles of Organometallic Chemistry in Pharmaceutical Research and Development; ACS Publications: Washington, DC, USA, 2019. [Google Scholar]
  7. Garbe, M.; Wei, Z.; Tannert, B.; Spannenberg, A.; Jiao, H.; Bachmann, S.; Scalone, M.; Junge, K.; Beller, M. Enantioselective Hydrogenation of Ketones using Different Metal Complexes with a Chiral PNP Pincer Ligand. Adv. Synth. Catal. 2019, 361, 1913–1920. [Google Scholar] [CrossRef]
  8. Lin, L.; Yao, S.; Gao, R.; Liang, X.; Yu, Q.; Deng, Y.; Liu, J.; Peng, M.; Jiang, Z.; Li, S. A highly CO-tolerant atomically dispersed Pt catalyst for chemoselective hydrogenation. Nat. Nanotechnol. 2019, 14, 354. [Google Scholar] [CrossRef]
  9. Nishimura, S. Handbook of Heterogeneous Catalytic Hydrogenation for Organic Synthesis; Wiley: New York, NY, USA, 2001. [Google Scholar]
  10. Zimmermann, B.M.; Kobosil, S.C.; Teichert, J.F. Catalytic hydrogenation of α, β-unsaturated carboxylic acid derivatives using copper (i)/N-heterocyclic carbene complexes. Chem. Commun. 2019, 55, 2293–2296. [Google Scholar] [CrossRef]
  11. Milone, C.; Crisafulli, C.; Ingoglia, R.; Schipilliti, L.; Galvagno, S. A comparative study on the selective hydrogenation of α, β unsaturated aldehyde and ketone to unsaturated alcohols on Au supported catalysts. Catal. Today 2007, 122, 341–351. [Google Scholar] [CrossRef]
  12. Yang, Y.; Chen, L.; Chen, Y.; Liu, W.; Feng, H.; Wang, B.; Zhang, X.; Wei, M. Selective hydrogenation of furfural on intermetallic compounds with outstanding catalytic performance. Green Chem. 2019. [Google Scholar] [CrossRef]
  13. Azran, J.; Buchman, O.; Amer, I.; Blum, J. Selective hydrogenation of α, β-unsaturated carbonyl compounds by rhodium trichloride and aliquat®-336 in a two-phase liquid system. J. Mol. Catal. 1986, 34, 229–234. [Google Scholar] [CrossRef]
  14. Ohta, T.; Miyake, T.; Seido, N.; Kumobayashi, H.; Akutagawa, S.; Takaya, H. Asymmetric hydrogenation of unsaturated carbonyl compounds catalyzed by BINAP-Ru (II) complexes. Enantioselective synthesis of γ-butyrolactones and cyclopentanones. Tetrahedron Lett. 1992, 33, 635–638. [Google Scholar] [CrossRef]
  15. Chen, P.; Li, W.; Wang, Y. Atmospheric hydrogenation of α, β-unsaturated ketones catalyzed by highly efficient and recyclable Pd nanocatalyst. Catal. Commun. 2019, 125, 10–14. [Google Scholar] [CrossRef]
  16. Ma, H.; Wang, L.; Chen, L.; Dong, C.; Yu, W.; Huang, T.; Qian, Y. Pt nanoparticles deposited over carbon nanotubes for selective hydrogenation of cinnamaldehyde. Catal. Commun. 2007, 8, 452–456. [Google Scholar] [CrossRef]
  17. Musselwhite, N.E.; Wagner, S.B.; Manbeck, K.A.; Carl, L.M.; Gross, K.M.; Marsh, A.L. Activity and selectivity of colloidal platinum nanocatalysts for aqueous phase cyclohexenone hydrogenation. Appl. Catal. A Gen. 2011, 402, 104–109. [Google Scholar] [CrossRef]
  18. Wu, B.; Huang, H.; Yang, J.; Zheng, N.; Fu, G. Selective hydrogenation of α, β-unsaturated aldehydes catalyzed by amine-capped platinum-cobalt nanocrystals. Angew. Chem. Int. Ed. 2012, 51, 3440–3443. [Google Scholar] [CrossRef] [PubMed]
  19. Tsang, S.C.; Cailuo, N.; Oduro, W.; Kong, A.T.; Clifton, L.; Yu, K.K.; Thiebaut, B.; Cookson, J.; Bishop, P. Engineering performed cobalt-doped platinum nanocatalysts for ultraselective hydrogenation. ACS Nano 2008, 2, 2547–2553. [Google Scholar] [CrossRef] [PubMed]
  20. Yuan, Y.; Yao, S.; Wang, M.; Lou, S.; Yan, N. Recent progress in chemoselective hydrogenation of α, β-unsaturated aldehyde to unsaturated alcohol over nanomaterials. Curr. Org. Chem. 2013, 17, 400–413. [Google Scholar] [CrossRef]
  21. Rioux, R.M.; Song, H.; Grass, M.; Habas, S.; Niesz, K.; Hoefelmeyer, J.D.; Yang, P.; Somorjai, G.A. Monodisperse platinum nanoparticles of well-defined shape: Synthesis, characterization, catalytic properties and future prospects. Top. Catal. 2006, 39, 167–174. [Google Scholar] [CrossRef]
  22. Bartoli, M.; Rosi, L.; Petrucci, G.; Armelao, L.; Oberhauser, W.; Frediani, M.; Piccolo, O.; Rathod, V.D.; Paganelli, S. An easily recoverable and recyclable homogeneous polyester-based Pd catalytic system for the hydrogenation of α, β-unsaturated carbonyl compounds. Catal. Commun. 2015, 69, 228–233. [Google Scholar] [CrossRef]
  23. Frediani, M.; Oberhauser, W.; Rosi, L.; Bartoli, M.; Passaglia, E.; Capozzoli, L. Palladium nanoparticles supported onto stereocomplexed poly (lactic acid)-poly (ε-caprolactone) copolymers for selective partial hydrogenation of phenylacetylene. Rendiconti Lincei 2017, 28, 51–58. [Google Scholar] [CrossRef]
  24. Oberhauser, W.; Evangelisti, C.; Jumde, R.; Petrucci, G.; Bartoli, M.; Frediani, M.; Mannini, M.; Capozzoli, L.; Passaglia, E.; Rosi, L. Palladium-nanoparticles on end-functionalized poly (lactic acid)-based stereocomplexes for the chemoselective cinnamaldehyde hydrogenation: Effect of the end-group. J. Catal. 2015, 330, 187–196. [Google Scholar] [CrossRef]
  25. Petrucci, G.; Oberhauser, W.; Bartoli, M.; Giachi, G.; Frediani, M.; Passaglia, E.; Capozzoli, L.; Rosi, L. Pd-nanoparticles supported onto functionalized poly (lactic acid)-based stereocomplexes for partial alkyne hydrogenation. Appl. Catal. A Gen. 2014, 469, 132–138. [Google Scholar] [CrossRef]
  26. Giachi, G.; Frediani, M.; Oberhauser, W.; Passaglia, E. Pd (II)-pyridine macrocomplexes based on poly (lactide). J. Polym. Sci. Part A Polym. Chem. 2011, 49, 4708–4713. [Google Scholar] [CrossRef]
  27. Rillema, D.P.; Stoyanov, S.R.; Cruz, A.J.; Nguyen, H.; Moore, C.; Huang, W.; Siam, K.; Jehan, A.; KomReddy, V. HOMO–LUMO energy gap control in platinum (ii) biphenyl complexes containing 2, 2’-bipyridine ligands. Dalton Trans. 2015, 44, 17075–17090. [Google Scholar] [CrossRef] [PubMed]
  28. Pazderski, L.; Szłyk, E.; Sitkowski, J.; Kamieński, B.; Kozerski, L.; Toušek, J.; Marek, R. Experimental and quantum-chemical studies of 15N NMR coordination shifts in palladium and platinum chloride complexes with pyridine, 2, 2’-bipyridine and 1, 10-phenanthroline. Magn. Reson. Chem. 2006, 44, 163–170. [Google Scholar] [CrossRef] [PubMed]
  29. Frediani, M.; Oberhauser, W.; Passaglia, E.; Rosi, L.; Bandelli, D.; Bartoli, M.; Petrucci, G. Pyridine and Bipyridine End-Functionalized Polylactide: Synthesis and Catalytic Applications. In Handbook of Composites from Renewable Materials, Functionalization; John Wiley & Sons: Hoboken, NJ, USA, 2017; Volume 4, p. 47. [Google Scholar]
  30. Kawanishi, Y.; Funaki, T.; Yatabe, T.; Suzuki, Y.; Miyamoto, S.; Shimoi, Y.; Abe, S. Spectral Evidence and DFT Calculations on the Formation of Bis (2, 2’-bipyridine) platinum (II)−N-Base Adducts. Inorg. Chem. 2008, 47, 3477–3479. [Google Scholar] [CrossRef] [PubMed]
  31. Oberhauser, W.; Evangelisti, C.; Jumde, R.P.; Psaro, R.; Vizza, F.; Bevilacqua, M.; Filippi, J.; Machado, B.F.; Serp, P. Platinum on carbonaceous supports for glycerol hydrogenolysis: Support effect. J. Catal. 2015, 325, 111–117. [Google Scholar] [CrossRef]
  32. Ji, X.; Niu, X.; Li, B.; Han, Q.; Yuan, F.; Zaera, F.; Zhu, Y.; Fu, H. Selective hydrogenation of cinnamaldehyde to cinnamal alcohol over platinum/graphene catalysts. ChemCatChem 2014, 6, 3246–3253. [Google Scholar] [CrossRef]
  33. Malathi, R.; Viswanath, R.P. Citral hydrogenation on supported platinum catalysts. Appl. Catal. A Gen. 2001, 208, 323–327. [Google Scholar] [CrossRef]
Applsci 09 03243 g001 550
Figure 1. Catalytic reaction pathways of (a) 2-Cyclohexen-1-one, (b) (E)-But-2-enal.
Figure 1. Catalytic reaction pathways of (a) 2-Cyclohexen-1-one, (b) (E)-But-2-enal.
Applsci 09 03243 g001
Applsci 09 03243 g002 550
Figure 2. Pathway for the synthesis of Pt(PLLA-Bipy)Cl2 macrocomplex.
Figure 2. Pathway for the synthesis of Pt(PLLA-Bipy)Cl2 macrocomplex.
Applsci 09 03243 g002
Applsci 09 03243 g003 550
Figure 3. Magnification of the NMR spectra in the aromatic region of (a) PLLA-Bipy, (b) Pt(PLLA-Bipy)Cl2 and (c) [Pt(PLLA-Bipy)Cl2]2 recovered after ID4.
Figure 3. Magnification of the NMR spectra in the aromatic region of (a) PLLA-Bipy, (b) Pt(PLLA-Bipy)Cl2 and (c) [Pt(PLLA-Bipy)Cl2]2 recovered after ID4.
Applsci 09 03243 g003
Applsci 09 03243 g004 550
Figure 4. UV–Vis spectra of (a) Pt(Bipy)Cl2, (b) PLLA-Bipy and (c) Pt(PLLA-Bipy)Cl2 collected in CH2Cl2 solution (M = 0.005 mol/L).
Figure 4. UV–Vis spectra of (a) Pt(Bipy)Cl2, (b) PLLA-Bipy and (c) Pt(PLLA-Bipy)Cl2 collected in CH2Cl2 solution (M = 0.005 mol/L).
Applsci 09 03243 g004
Applsci 09 03243 g005 550
Figure 5. The catalytic reaction mixture of (a) Pt(PLLA-Bipy)Cl2 under reaction conditions, (b) Pt(PLLA-Bipy)Cl2 before and after catalysis at room temperature, (c) Pt(Bipy)Cl2 at room and reaction temperature.
Figure 5. The catalytic reaction mixture of (a) Pt(PLLA-Bipy)Cl2 under reaction conditions, (b) Pt(PLLA-Bipy)Cl2 before and after catalysis at room temperature, (c) Pt(Bipy)Cl2 at room and reaction temperature.
Applsci 09 03243 g005
Applsci 09 03243 g006 550
Figure 6. Structure of the hypothesized dimeric specie [Pt(PLLA-Bipy)Cl2]2.
Figure 6. Structure of the hypothesized dimeric specie [Pt(PLLA-Bipy)Cl2]2.
Applsci 09 03243 g006
Table
Table 1. Catalytic performances of Pt(Bipy)Cl2 (A) and Pt(PLLA-Bipy)Cl2 (B) in the selective hydrogenation of 2-cyclohexen-1-one (I) and (E)-but-2-enal (IV) at 60 °C.
Table 1. Catalytic performances of Pt(Bipy)Cl2 (A) and Pt(PLLA-Bipy)Cl2 (B) in the selective hydrogenation of 2-cyclohexen-1-one (I) and (E)-but-2-enal (IV) at 60 °C.
RunCatSubstrateTime [h]Pressure [MPa]I [%]II [%]III [%]IV [%]V [%]VI [%]Conversion a [%]TOF b
ID1A Applsci 09 03243 i00131.110000---------
ID2B31.127730-----73243
ID3B61.11990-----99165
ID4B c31.161390-----39130
ID5B32.2595--------95317
ID6B d32.26040--------40133
ID7B Applsci 09 03243 i00232.2------488896320
ID8B62.2------388997161
ID10B e32.2------948791303
a 60 °C, substrate (2.7 mmol), catalyst (0.0027 mmol), toluene (5 mL), b TOF defined as mmol (product) × (mmol Pt × h)−1, c Catalyst recycled after three cycles using catalytic conditions of ID2, d Catalyst recycled after three cycles using catalytic conditions of ID5, e Catalyst recycled after three cycles using catalytic conditions of ID7.

Share and Cite

MDPI and ACS Style

Bartoli, M.; Rosi, L.; Mini, B.; Petrucci, G.; Passaglia, E.; Frediani, M. Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds. Appl. Sci. 2019, 9, 3243. https://doi.org/10.3390/app9163243

AMA Style

Bartoli M, Rosi L, Mini B, Petrucci G, Passaglia E, Frediani M. Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds. Applied Sciences. 2019; 9(16):3243. https://doi.org/10.3390/app9163243

Chicago/Turabian Style

Bartoli, Mattia, Luca Rosi, Benedetta Mini, Giorgio Petrucci, Elisa Passaglia, and Marco Frediani. 2019. "Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds" Applied Sciences 9, no. 16: 3243. https://doi.org/10.3390/app9163243

APA Style

Bartoli, M., Rosi, L., Mini, B., Petrucci, G., Passaglia, E., & Frediani, M. (2019). Catalytic Performances of Platinum Containing PLLA Macrocomplex in the Hydrogenation of α,β-Unsaturated Carbonyl Compounds. Applied Sciences, 9(16), 3243. https://doi.org/10.3390/app9163243

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop