Next Article in Journal
Sonochemical Synthesis, Characterization and Optical Properties of Tb-Doped CdSe Nanoparticles: Synergistic Effect between Photocatalysis and Sonocatalysis
Next Article in Special Issue
Ionic Transport in CsNO2-Based Nanocomposites with Inclusions of Surface Functionalized Nanodiamonds
Previous Article in Journal
Plasma-Enhanced Atomic Layer Deposition of TiN Thin Films as an Effective Se Diffusion Barrier for CIGS Solar Cells
Previous Article in Special Issue
Hydrothermal Activation of Porous Nitrogen-Doped Carbon Materials for Electrochemical Capacitors and Sodium-Ion Batteries
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 11
Issue 2
10.3390/nano11020377
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Preparation and Application of Fe-N Co-Doped GNR@CNT Cathode Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells

by
Man Zhang
,
Zhaokun Ma
* and
Huaihe Song
*
Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China
*
Authors to whom correspondence should be addressed.
Nanomaterials 2021, 11(2), 377; https://doi.org/10.3390/nano11020377
Submission received: 3 January 2021 / Revised: 24 January 2021 / Accepted: 25 January 2021 / Published: 2 February 2021
(This article belongs to the Special Issue Electrochemical Properties of Carbon Nanomaterials)
Browse Figures
Review Reports Versions Notes

Abstract

:
Through one-step pyrolysis, non-noble-metal oxygen reduction reaction (ORR) electrocatalysts were constructed from ferric trichloride, melamine, and graphene nanoribbon@carbon nanotube (GNR@CNT), in which a portion of the multiwall carbon nanotube is unwrapped/unzipped radially, and thus graphene nanoribbon is exposed. In this study, Fe-N/GNR@CNT materials were used as an air-cathode electrocatalyst in microbial fuel cells (MFCs) for the first time. The Fe-N/C shows similar power generation ability to commercial Pt/C, and its electron transfer number is 3.57, indicating that the ORR process primarily occurs with 4-electron. Fe species, pyridinic-N, graphitic-N, and oxygen-containing groups existing in GNR@CNT frameworks are likely to endow the electrocatalysts with good ORR performance, suggesting that a GNR@CNT-based carbon supporter would be a good candidate for the non-precious metal catalyst to replace Pt-based precious metal.

1. Introduction

Microbial fuel cells (MFCs) enable the degradation of sewage and produce useful electricity at the same time [1,2]. Therefore, they have created a research upsurge in the field of energy storage in recent years. Since oxygen is widely available and the product of the oxygen reduction reaction (ORR) is generally water, which does not cause secondary pollution, air-cathode MFC is considered a promising configuration. Until now, the low energy output has been the bottleneck restricting the practical application of MFCs [3].
Several factors affect MFC performance, including anode materials [4,5,6], MFC configurations [7,8,9], cathode catalysts [10,11,12], and electroactive bacteria [13,14]. Among them, the high overpotential loss and price of ORR catalysts play an important role in limiting the power generation capacity. Platinum (Pt)-based materials are still the most efficient ORR catalysts at present, despite their shortcomings, such as low reserves, high cost, poor durability, and inactivation caused by poisoning. Given these disadvantages of the noble metal catalysts, numerous scientists are exploring advanced, low-cost materials to replace Pt-based materials [15,16,17]. In particular, carbon-based electrocatalysts containing Fe and N elements (Fe-N/C) have been widely used as the most promising alternatives to noble metal Pt, due to the similar catalytic activity and abundant precursor species [18,19]. Pyridinic-N is commonly recognized as the dominant active site to catalyze the oxygen reduction reaction, and Fe-Nx species have also been suggested as active sites [20,21,22]. The catalytic mechanism and the precise active sites are still not fundamentally understood, owing to the heterogeneous moieties and surrounding environments within the electrocatalysts [22].
Generally speaking, Fe-N/C-based catalysts can be obtained by the direct pyrolysis of the precursors containing Fe, N, as well as C, at 600–1000 °C. In this way, a large amount of Fe and N co-doped materials equipped with considerable ORR catalytic properties were prepared [23,24,25,26]. Considering the unique physical and chemical properties of different carbon sources, such as morphology, conductivity, and specific surface area, carbon supporters have an important impact on the ORR at the triple-phase interface [27]. A range of carbon materials have been explored, containing covalent triazine framework [28], hierarchically porous carbon [29], carbon nanosheet [30], carbon nanotube (CNT) [31], graphene [32], etc. For example, Wang et al. prepared Fe-N co-doped hierarchical porous 2D carbon nanosheets using a top-down strategy. They showed high ORR activity when used as a cathode catalyst in an alkaline medium [30]. Kang and coworkers constructed Fe-N/CNT material via a direct growth method [33]. The prepared catalyst had a one-dimensional (1D) framework to increase electron transfer, and a large specific surface area to load the active sites, leading to good oxygen reduction ability in acid solution. Moreover, graphene is also suitable for catalytic applications because of its good conductivity and rich edge defects. Ma and his research group chose three kinds of graphene, including high-activity graphene (HAG), high-conductivity graphene (HCG), and single-layer graphene (SLG), as the carbon source to compare their performance [34]. They found that multiwall carbon nanotube (MW-CNT) were grown during the preparation of Fe-based catalysts using single-layer graphene as a carbon source. Both the onset potential (Eonset) and the half-wave potential (E1/2) of the obtained Fe-N/SLG nanocomposite were superior to that of Pt/C.
Graphene nanoribbon (GNR) is thin elongated strips of sp2-hybridized carbon atoms with quasi-one-dimensional structures [35]. Correspondingly, GNRs have a large aspect ratio/length–width ratio, and an abundance of non-tri-coordinate carbon atoms at the edges as well as defects, which is favorable for improving the density of reactive sites [36]. The variety of the edges of GNR results in different chemical and electronic characteristics, such as zigzag-edge and armchair-edge. Generally speaking, the easiest way to produce GNR is by longitudinally unwrapping carbon nanotube [37,38,39]. The edges can act as sites to anchor heteroatoms. It was reported that the doping amount of heteroatoms is positively correlated with the edge level [40,41]. Nevertheless, the conductivity of the material will inevitably be damaged. The pure GNR can more feasibly be restacked, resulting in lower utilization of reactive sites. Thus, the oxygen reduction activity of the electrocatalysts prepared from fully opened MW-CNT (pristine graphene nanoribbon) is not always satisfactory, as demonstrated by Shui et al. [42]. Accordingly, several heteroatom-doped partially unwrapped MW-CNT along the radical axis (GNR@CNT) have been explored as ORR catalysts, such as self-doping (O), N doping, [36], N, S co-doping, [40], and Fe, N co-doping [43]. Shui and his coworkers discovered that the zigzag carbon atom is the most active catalytic place among all of the carbon defects on GNR@CNT for the ORR in an alkaline medium for proton exchange membrane fuel cells. Zhou et al. prepared an Fe-N co-doped GNR@CNT composite to illustrate that longitudinally unwrapping MW-CNT material is rich in edge defects which can augment both the Fe-N-doping degree and reactive sites during the pyrolysis process [43]. The obtained FeN-uCNT-700 showed good oxygen reduction properties and durability in alkaline solution. Some of these catalysts revealed good performance in acidic or alkaline medium.
However, graphene-nanoribbon-based materials have not yet been studied in neutral media for microbial fuel cells. Within the scope of laboratory research, the nutrient of the MFCs usually consists of vitamins, minerals, phosphate buffer, and organic matter. In terms of practical application, the composition of municipal sewage is more complicated. In addition, electrogenic microorganisms not only produce some metabolites, but also adhere to the cathode surface to form biofilms, which affect the catalytic activity of the electrocatalysts. Thus, the electrolyte compositions of the MFCs are more complex than the acid or alkaline solutions used in other types of fuel cells.
Considering the above, GNR@CNT was first used as a carbon support herein to prepare cathode catalysts for MFCs. Accordingly, we fabricated Fe-N co-doped GNR@CNT (denoted as Fe-N/GNR@CNT) via one-pot pyrolysis, which served as a cathode catalyst to study its oxygen reduction reaction performance in a neutral solution for MFCs.

2. Materials and Methods

2.1. Synthesis of Fe-N/GNR@CNT Electrocatalysts

In this study, the GNR@CNT precursor was prepared by partially unwrapping multiwall carbon nanotubes in the longitudinal direction, as shown in Figure 1. The concrete step was the same as reported in the literature [42]. Firstly, we measured out 400 mg of pristine MW-CNTs (0.5–2 μm in length and 30–50 nm in outer diameter) into a beaker, and then added 72 mL of concentrated H2SO4 into the reaction system. Secondly, after stirring evenly, we slowly added 1.6 g KMnO4 into the above reaction vessel and continued stirring for 1 h. The process of adding KMnO4 required an ice bath. It was placed in a 55 °C water bath for 15 min, then transferred to a 70 °C water bath for 45 min. We stopped heating, and cooled down the mixture to room temperature. Subsequently, it was poured into 200 mL of iced water with 6 mL of hydrogen peroxide. It was centrifuged at 10,000 rpm, and the impurities were removed with diluted hydrochloric acid. Finally, after several days of dialysis, the oxidized GNR@CNT precursor was obtained.
The Fe-N/C materials with different Fe-doping ratios were prepared as follows: 100 mg of oxidized GNR@CNT and 100 mg of melamine were mixed with different amounts of FeCl3 (containing 25, 50, and 100 mg, respectively), followed by carbonization at 800 °C for 60 min in Ar atmosphere. Accordingly, they were denoted as Fe-N/C-1:4:4, Fe-N/C-1:2:2, and Fe-N/C-1:1:1, respectively. The MFCs using Fe-N/C-1:4:4, Fe-N/C-1:2:2, and Fe-N/C-1:1:1 materials as cathode catalysts were called MFC-Fe-N/C-1:4:4, MFC-Fe-N/C-1:2:2, and MFC-Fe-N/C-1:1:1, respectively.
Fe-N/C materials with different N-doping ratios were also synthesized. Oxidized GNR@CNT (100 mg) and 25 mg of FeCl3 were mixed with different amounts of melamine (containing 50, 200, and 400 mg, respectively), and the other steps were all the same as above. Accordingly, they were denoted as Fe-N/C-1:2:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4, respectively. The MFCs using Fe-N/C-1:2:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4 materials as cathode catalysts were named as MFC-Fe-N/C-1:2:4, MFC-Fe-N/C-1:8:4, and MFC-Fe-N/C-1:16:4, respectively.

2.2. MFC Construction and Setup

A single-chamber air-cathode MFC (Physics&Chemistry Co., Ltd., Kowloon, HK) was adopted as a reaction device, and the effective area of the carbon cloth cathode was 7 cm2. Detailed parameters can be found in the literature [44,45]. The catalyst loadings were all the same (2 mg·cm−2). Acid-treated carbon fiber brushes were used as an anode to attach microorganisms. The pitch-based carbon fibers were cut to 2.5 cm long, then weighed out to 500 mg of carbon fibers. The fibers were fixed and twisted with titanium wires.
Additionally, the external resistance was fixed at 1 kΩ. The sludge with mixed cultures came from the Gaobeidian Wastewater Treatment Plant, Beijing. For the battery setup phase, a 1:1 volume ratio of sewage and nutrients was added, and the medium was changed every 24 h. Each MFC was tested in parallel and kept at about 30 °C.

2.3. Analysis and Measures

The output voltages of each MFC loading with a 1 kΩ resister were measured by a data acquisition system (CT2001A, LANHE). The polarization data of the MFCs were tested by the pseudo-steady-state discharge method. The external resistors were decreased from 10 kΩ to 100 Ω, one step at a time. For each resistance, the potentials between anode and cathode, anode and reference electrode (Ag/AgCl), and cathode and reference electrode were measured every 10 min under transient-steady-state circumstances by a multitester. Furthermore, the slope of the linear part of the polarization curves was equivalent to the apparent internal resistance (Rint) of the MFCs.
The crystal structures of the materials were obtained by X-ray diffraction (XRD) spectra. The structure and morphology of the GNR@CNT-based composite were tested by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The graphitization degree of the catalyst was characterized by Raman spectra analysis. The functional groups on the surface of the sample were tested using X-ray photoelectron spectroscopy (XPS). The specific surface area was determined using the Brunauer-Emmett-Teller(BET) adsorption isotherm method.
The ORR catalytic activities were characterized by a rotating disk electrode (RDE) test. The reference electrode was Ag/AgCl, and the counter electrode was a carbon rod. For the working electrode, 5 mg of the catalysts was dispersed in 1 mL ethanol by the ultrasonic meter. Then, 10 μL of 5% Nafion was added and continued with sonication for 60 min to prepare a homogeneous suspension. The medium was 50 mM PBS (pH = 7).Catalyst ink (10 μL) was dripped to the working electrode. After drying, ORR tests were performed. The electron transfer number (n) towards the ORR was calculated from the Koutecky-Levich(K–L) plot:
1/J = 1/JK + 1/JL = 1/JK + 1/(Bω1/2)
B = 0.62nFAC0(D0)2/3ν−1/6
where J, JK, and JL represent the measured, kinetic, and diffusion-limited current density, respectively; ω is the rotating speed of the working elctrode; F is the Faraday constant; A is the area of the working electrode; D0 is the diffusion co-efficiency of oxygen; C0 is the bulk concentration of the dissolved oxygen in the solution; ν is the kinematic viscosity of the solution.

3. Results

3.1. The Identification of GNR@CNT

In Figure 2A–C, we can observe that the bare, multiwalled CNT materials were partially unzipped to form GNRs after being treated with concentrated H2SO4 and KMnO4. The GNR@CNT sample features rich edge contents. Compared with the pristine CNT, as can be seen from Figure 2D, the graphitic (002) peaks at 26° and (100) at 43° of the GNR@CNT hybrid become weakened, and the graphene-oxide (001) peak at about 10° appears. Meanwhile, as can be seen from Table S1, the oxygen content of GNR@CNT is increased from 2.54% to 38.28%. Oxygen-containing groups may help anchor iron ions and melamine, which is beneficial to improve the heteroatom-doping level of the catalysts. The increased sulfur content comes from the concentrated H2SO4.
Moreover, the destruction of the outside wall of the original CNT can also be demonstrated by Raman spectra (Figure 2E). The ID/IG ratio of pure CNT was 1.02. The unzipped sample shows an increased ID/IG ratio (1.14), indicating the reduced graphitization degree as well as the successful exfoliation of the CNT.

3.2. The Performance of the Fe-N/C Materials with Different Fe-Doping Contents

To explore the appropriate Fe-doping contents, we fixed the ratio of carbon support to melamine at 1:1 and gradually increased the additive content of FeCl3. XRD patterns (Figure 3) indicate that the oxidized GNR@CNT substrates were reduced to GNR@CNT with the graphene-oxide (001) peak vanishing. At the same time, the characteristic peaks of Fe3C nanoparticles emerged after heat treatment. Meanwhile, with the increase of FeCl3, more and more Fe3C nanoparticles were formed (Figure S1). According to the previous research results, metallic Fe/Fe3C provided good ORR activity, and the Fe-based nanoparticles were able to increase the catalytic ability of the N-Cx active sites due to the reduction of the working function that arises from the electrons transfer from Fe or Fe3C nanoparticles to the carbon planes [46,47,48].
The maximum power densities of MFC-Fe-N/C-1:4:4, MFC-Fe-N/C-1:2:2, and MFC-Fe-N/C-1:1:1 were about 801, 701, and 454 mW/m2, respectively (Figure 4A). With the ratio of FeCl3 increasing, the MFC performance worsened. From the slope of the polarization curves (Figure 4B), the internal resistances of MFC-Fe-N/C-1:4:4, MFC-Fe-N/C-1:2:2, and MFC-Fe-N/C-1:1:1 were ca. 193, 207, and 249 Ω, respectively. The potentials of the anodes are similar, so the difference in MFC performance was mainly brought about by the cathode catalysts (Figure 4C).

3.3. The Performance of the Fe-N/C Materials with Different N-Doping Contents

3.3.1. The Performance of Fe-N/C Catalysts with Different N-Doping Amounts

Subsequently, we prepared electrocatalysts with different N-doping amounts to explore the bioelectricity generation performance. In Figure S2, it can be seen that in addition to the characteristic peaks of amorphous carbon, the characteristic peaks of Fe3C were also present in the Fe-based catalysts with different nitrogen-doping amounts. After carbonization, aggregates of carbon nanotube derivatives were visible, and Fe-based nanoparticles could also be observed growing on the surface of the carbon matrix (Figure S3A–D). Meanwhile, the EDS mapping images of Fe-N/C-1:4:4 show that O, N, Fe, and S elements were evenly distributed on the surface (Figure S3E), indicating the successful doping of heteroatoms.
All the MFCs were set up successfully and the output voltages under 1000 Ω external resistance of MFC-Pt/C, MFC-Fe-N/C-1:2:4, MFC-Fe-N/C-1:4:4, MFC-Fe-N/C-1:8:4, and MFC-Fe-N/C-1:16:4 were approximately 547, 460, 580, 560, and 460 mV, respectively (Figure 5A). The maximum power densities of MFC-Pt/C, MFC-Fe-N/C-1:2:4, MFC-Fe-N/C-1:4:4, MFC-Fe-N/C-1:8:4, and MFC-Fe-N/C-1:16:4 after cycling for one week were ca. 851, 590, 801, 752, and 590 mW/m2, respectively (Figure 5B). The Fe-N/C-1:4:4 sample possessed the best electricity generation performance, which is only 5.6% less than that of Pt/C. From the slope of the ohmic polarization region (Figure 5C), we can see that the internal resistances of these MFCs were 183, 239, 193, 203, and 229 Ω, respectively. The anode polarization curves (Figure 5D) indicate that the potentials of the anodes were similar. All conditions are the same except for the cathode catalysts, so the difference in battery performance mainly came from the cathode electrocatalysts. Furthermore, we also tested the cycling stability of Pt/C and MFC-Fe-N/C-1:4:4. After cycling for four weeks, the power densities of MFC-Pt/C and MFC-Fe-N/C-1:4:4 were reduced to 722 and 704 mW/m2, respectively (Figure S4), suggesting similar cyclic stability.

3.3.2. XPS and BET Specific Surface Area Analysis

XPS measurements were further carried out to analyze the elemental composition and chemical states on the surface of these catalysts with different N-doping contents. XPS survey spectra of the as-obtained Fe-N/C samples also confirm the coexistence of C, N, O, Fe, and S elements on the samples’ surfaces (Figure S5). The ratio values of every kind of element are shown in Table 1. The Fe-N/C-1:4:4 sample exhibited the highest surface heteroatomic doping contents including N, O, Fe, and S. The N 1s spectra show an enlarged peak, which is deconvoluted in four peaks (i.e., 398.1, 399.3, 400.9, and 403.4 eV) related to pyridinic-N, pyrrolic-N, graphitic-N, and oxidized-N, respectively (Figure 6). The ratio values of each nitrogen species are summarized in Table 1. The Fe-N/C-1:4:4 sample not only exhibited the highest nitrogen-doping content but also showed the highest amount of pyridinic-N. The graphitic-N content in Fe-N/C-1:4:4 was also higher. According to the previous reports, pyridinic-N and graphitic-N may be the catalytic sites for the ORR [43,49]. The peak at ~285.8 eV indicates the C-N/C-S bonds in the fitted high-resolution C 1s spectra (Figure S6A). The O 1s XPS spectra are deconvoluted in two peaks related to C=O/O-C=O at 531.1 eV and C-O-H/C-O-C at ~532.8 eV (Figure S6B). Previous literature presumed that oxygen-containing functionalized species in the catalysts were likely to reduce the activation energy of the oxygen reduction process in neutral electrolyte [50,51]. The oxygen groups could make the catalyst surface more negative, which may serve as the active center to load iron atoms, comprising adsorption, coordination, and replacement [34]. The Fe 2p HR-XPS spectra in Figure S6C demonstrate the coexistence of Fe0 and Fe2+/Fe3+ [52]. Ferric ions can combine with pyridinic-N to form Fe-Nx species, which have better ORR catalytic activity. In short, the coexistence of active N and Fe species with relatively high O contents may give the Fe-N/C-1:4:4 catalyst a good catalytic activity [53].
The specific surface area of Fe-N/C electrocatalysts with different nitrogen-doping content was measured by nitrogen adsorption–desorption isotherms. All of the Fe-based catalysts exhibited type IV isotherms with an obvious hysteresis loop at P/P0 ranging from 0.4 to 1.0 (Figure 7A) [34]. This phenomenon is the typical symbol of mesoporous structure formed by the stacking of particles. Furthermore, at low relative pressure, the adsorption capacities increased rapidly, indicating that there were micropores in the materials as well. The pore size distribution curves (Figure 7B) also demonstrate that the pores in the materials were mainly micropores and mesopores. Pore channels guarantee the diffusion of electrolyte and oxygen to the active sites. The specific surface areas of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4 were 352.3, 197.4, 73.6, and 237 m2/g, respectively (Table 2), indicating that the ORR electrocatalytic activity of the Fe-N/C-1:4:4 sample was dominated by other factors, such as the heteroatom doping level and number of active sites.

3.3.3. RDE Tests

To study the catalytic characteristics of the Fe-N/C-1:4:4, an RDE test was conducted in 50 mM PBS electrolyte. Pt/C was measured for comparison as well. The E1/2 of Fe-N/C-1:4:4 was more negative than Pt/C (Figure 8A). The results of the RDE test corresponded with the MFC performance. Figure 8B,C display the linear sweep voltammetry(LSV) plots of the Fe-N/C-1:4:4 and Pt/C at different rotating speeds. From the slope of K–L plots, we can obtain the electron transfer numbers of Fe-N/C-1:4:4 and Pt/C were ca. 3.57 and 3.90, respectively, suggesting that Fe-N/C-1:4:4 mainly catalyzed the ORR process by a 4 e− reduction pathway.

4. Discussion

In summary, we synthesized GNR@CNT materials with abundant edges by chemical oxidation. Fe-N/GNR@CNT showed good catalytic activity towards oxygen reduction in neutral electrolyte, which can be attributed to the synergistic effect of Fe3C nanoparticles, pyridinic- and graphitic-N groups, and oxygen-containing species existing in the matrix of GNR@CNT. The MFC using Fe-N/C-1:4:4 as the cathode catalyst exhibited good bioelectricity generation ability, and it mainly catalyzed the oxygen reduction reaction procedure by the four-electron pathway. Although the MFC performance and catalytic activity of the Fe-N/GNR@CNT sample were slightly inferior to that of Pt/C, the cost of the GNR@CNT-based materials shows great potential for real-world application.

Supplementary Materials

The following is available online at https://www.mdpi.com/2079-4991/11/2/377/s1. Table S1: The element contents of CNT and GNR@CNT tested by Element analysis; Figure S1: SEM images of (A) Fe-N/C-1:4:4, (B) Fe-N/C-1:2:2, and (C) Fe-N/C-1:1:1, respectively; Figure S2: XRD patterns of GNR@CNT-based samples changing with the melamine-doping contents; Figure S3: SEM images of (A) Fe-N/C-1:2:4, (B) Fe-N/C-1:4:4, (C) Fe-N/C-1:8:4, and (D) Fe-N/C-1:16:4, respectively. (E) the EDS mapping image of (F) C, (G) O, (H) N, (I)Fe, and (J) S for Fe-N/C-1:4:4, respectively; Figure S4: The power density curves of MFC-Pt/C (A) and MFC-Fe-N/C-1:4:4 (B) after cycling for 1 week and 4 weeks, respectively; Figure S5: XPS survey spectra of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4 electrocatalysts, respectively; Figure S6: Deconvolution of C1s, O1s, and Fe2p XPS spectra of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4, respectively; Table S2: Summary of the application of Fe-N/C as cathode catalysts in MFCs.

Author Contributions

M.Z. completed the experiments and manuscripts. Z.M. and H.S. guided the experiments. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Tao, Y.; Liu, Q.; Chen, J.; Wang, B.; Wang, Y.; Liu, K.; Li, M.; Jiang, H.; Zhentan, L.; Wang, D.; et al. Hierarchically three-dimensional nanofiber based textile with high con-ductivity and biocompatibility as a microbial fuel cell anode. Environ. Sci. Technol. 2016, 50, 7889–7895. [Google Scholar] [CrossRef] [PubMed]
  2. Wu, S.; Li, H.; Zhou, X.; Liang, P.; Zhang, X.; Jiang, Y.; Huang, X. A novel pilot-scale stacked microbial fuel cell for efficient electricity gener-ation and wastewater treatment. Water Res. 2016, 98, 396–403. [Google Scholar] [CrossRef] [PubMed]
  3. Yang, Y.; Liu, T.; Liao, Q.; Ye, D.; Zhu, X.; Li, J.; Zhang, P.; Peng, Y.; Chen, S.; Li, Y. A three-dimensional nitrogen-doped graphene aerogel-activated carbon composite catalyst that enables low-cost microfluidic microbial fuel cells with superior performance. J. Mater. Chem. A 2016, 4, 15913–15919. [Google Scholar] [CrossRef]
  4. Khan, N.; Anwer, A.H.; Ahmad, A.; Sabir, S.; Sevda, S.; Khan, M.D. Investigation of CNT/PPy-modified carbon paper electrodes under anaerobic and aerobic conditions for phenol bioremediation in microbial fuel cells. ACS Omega 2019, 5, 471–480. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Liu, D.; Chang, Q.; Gao, Y.; Huang, W.; Sun, Z.; Yan, M.; Guo, C. High performance of microbial fuel cell afforded by metallic tungsten carbide decorated carbon cloth anode. Electrochim. Acta 2020, 330, 135243. [Google Scholar] [CrossRef]
  6. Li, M.; Ci, S.; Ding, Y.; Wen, Z. Almond shell derived porous carbon for a high-performance anode of microbial fuel cells. Sustain. Energy Fuels 2019, 3, 3415–3421. [Google Scholar] [CrossRef]
  7. Dessì, P.; Chatterjee, P.; Mills, S.; Kokko, M.; Lakaniemi, A.M.; Collins, G.; Lens, P.N. Power production and microbial community composition in thermophilic acetate-fed up-flow and flow-through microbial fuel cells. Bioresour. Technol. 2019, 294, 122115. [Google Scholar] [CrossRef]
  8. Zhang, M.; Ma, Z.; Zhao, N.; Zhang, K.; Song, H. Increased power generation from cylindrical microbial fuel cell inoculated with P. aeruginosa. Biosens. Bioelectron. 2019, 141, 111394. [Google Scholar] [CrossRef]
  9. Fraiwan, A.; Choi, S. A stackable, two-chambered, paper-based microbial fuel cell. Biosens. Bioelectron. 2016, 83, 27–32. [Google Scholar] [CrossRef] [Green Version]
  10. Li, M.; Zhou, J.; Bi, Y.-G.; Zhou, S.-Q.; Mo, C.-H. Transition metals (Co, Mn, Cu) based composites as catalyst in microbial fuel cells ap-plication: The effect of catalyst composition. Chem. Eng. J. 2020, 383, 123152. [Google Scholar] [CrossRef]
  11. Yang, R.; Li, K.; Lv, C.; Cen, B.; Liang, B. The exceptional performance of polyhedral porous carbon embedded nitrogen-doped carbon networks as cathode catalyst in microbial fuel cells. J. Power Sources 2019, 442, 227229. [Google Scholar] [CrossRef]
  12. Zhang, X.; Wang, Q.; Tang, C.; Wang, H.-F.; Liang, P.; Huang, X.; Zhang, Q. High-power microbial fuel cells based on a carbon–carbon composite air cathode. Small 2019, 16, 1905240. [Google Scholar] [CrossRef] [PubMed]
  13. Kondaveeti, S.; Lee, S.-H.; Park, H.-D.; Min, B. Specific enrichment of different Geobacter sp. in anode biofilm by varying interspatial distance of electrodes in air-cathode microbial fuel cell (MFC). Electrochim. Acta 2020, 331, 135388. [Google Scholar] [CrossRef]
  14. Li, W.; Liu, Y.; Wu, L.; Ren, R.; Lv, Y.K. Enhanced nitrogen removal of low C/N wastewater using a novel microbial fuel cell (MFC) with Cupriavidus sp. S1 as a biocathode catalyst (BCS1). J. Chem. Technol. Biotechnol. 2019, 95, 1203–1215. [Google Scholar] [CrossRef]
  15. Wu, J.-C.; Yan, W.-M.; Chiang, W.-H.; Thangavel, S.; Wang, C.-H.; Wang, C.-T. Innovative multi-processed N-doped carbon and Fe3O4 cathode for enhanced bioelectro-Fenton microbial fuel cell performance. Int. J. Energy Res. 2019, 43, 7594–7603. [Google Scholar]
  16. Ma, Y.; You, S.; Jing, B.; Xing, Z.; Chen, H.; Dai, Y.; Zhang, C.; Ren, N.; Zoua, J. Biomass pectin-derived N, S-enriched carbon with hierarchical porous structure as a metal-free catalyst for enhancing bio-electricity generation. Int. J. Hydrogen Energy 2019, 44, 16624–16638. [Google Scholar] [CrossRef]
  17. Xu, Y.; Zhou, S.; Li, M. Enhanced bioelectricity generation and cathodic oxygen reduction of air breathing microbial fuel cells based on MoS2 decorated carbon nanotube. Int. J. Hydrogen Energy 2019, 44, 13875–13884. [Google Scholar] [CrossRef]
  18. Liu, J.; Jin, Z.; Wang, X.; Ge, J.; Liu, C.; Xing, W. Recent advances in active sites identification and regulation of M-N/C electro-catalysts towards ORR. Sci. China Ser. B Chem. 2019, 62, 669–683. [Google Scholar] [CrossRef]
  19. Santoro, C.; Serov, A.; Gokhale, R.; Rojas-Carbonell, S.; Stariha, L.; Gordon, J.; Artyushkova, K.; Atanassov, P. A family of Fe-N-C oxygen reduction electrocatalysts for microbial fuel cell (MFC) application: Relationships between surface chemistry and performances. Appl. Catal. B Environ. 2017, 205, 24–33. [Google Scholar] [CrossRef]
  20. Kim, J.H.; Sa, Y.J.; Jeong, H.Y.; Joo, S.H. Roles of Fe−Nx and Fe−Fe3C@C species in Fe−N/C electrocatalysts for oxygen reduction re-action. ACS Appl. Mater. Interfaces 2017, 9, 9567–9575. [Google Scholar] [CrossRef]
  21. Chen, G.; Liu, P.; Liao, Z.; Sun, F.; He, Y.; Zhong, H.; Zhang, T.; Zschech, E.; Chen, M.; Wu, G.; et al. Zinc-mediated template synthesis of Fe-N-C electrocatalysts with densely accessible Fe-Nx active sites for efficient oxygen reduction. Adv. Mater. 2020, 32, 1907399. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  22. Asset, T.; Atanassov, P. Iron-nitrogen-carbon catalysts for proton exchange membrane fuel cells. Joule 2020, 4, 33–44. [Google Scholar] [CrossRef]
  23. Wei, Q.; Zhang, G.; Yang, X.; Chenitz, R.; Banham, D.; Yang, L.; Ye, S.; Knights, S.; Sun, S. 3D porous Fe/N/C spherical nanostructures as high-performance electrocatalysts for oxygen reduction in both alkaline and acidic media. ACS Appl. Mater. Interfaces 2017, 9, 36944–36954. [Google Scholar] [CrossRef] [Green Version]
  24. Jiang, L.; Duan, J.; Zhu, J.; Chen, S.; Antonietti, M. Iron-cluster-directed synthesis of 2D/2D Fe–N–C/MXene superlattice-like hetero-structure with enhanced oxygen reduction electrocatalysis. ACS Nano 2020, 14, 2436–2444. [Google Scholar] [CrossRef] [PubMed]
  25. Lai, Q.; Zheng, L.; Liang, Y.; Hea, J.; Zhao, J.; Chen, J. Metal–organic-framework-derived Fe-N/C electrocatalyst with five-coordinated Fe-Nx sites for advanced oxygen reduction in acid media. ACS Catal. 2017, 7, 1655–1663. [Google Scholar] [CrossRef]
  26. Wang, Y.-C.; Huang, L.; Zhang, P.; Qiu, Y.-T.; Sheng, T.; Zhou, Z.; Wang, G.; Liu, J.; Rauf, M.; Gu, Z.-Q.; et al. Constructing a triple-phase interface in micropores to boost performance of Fe/N/C catalysts for direct methanol fuel cells. ACS Energy Lett. 2017, 2, 645–650. [Google Scholar] [CrossRef]
  27. Wu, L.; Cao, X.; Hu, W.; Ji, Y.; Zhu, Z.Z.; Li, X.-F. Improving the oxygen reduction reaction activity of FeN4–graphene via tuning electronic characteristics. ACS Appl. Energy Mater. 2019, 2, 6634–6641. [Google Scholar] [CrossRef]
  28. Jena, H.S.; Krishnaraj, C.; Parwaiz, S.; Lecoeuvre, F.; Schmidt, J.; Pradhan, D.; Van Der Voort, P. Illustrating the role of quaternary-N of BINOL Co-valent triazine-based frameworks in oxygen reduction and hydrogen evolution reactions. ACS Appl. Mater. Interfaces 2020, 12, 44689–44699. [Google Scholar] [CrossRef]
  29. Feng, B.; Wu, X.; Niu, Y.; Li, W.; Yao, Y.; Hu, W.; Ming Li, C. Hierarchically porous Fe/N–C hollow spheres derived from mela-mine/Fe-incorporated polydopamine for efficient oxygen reduction reaction electrocatalysis. Sustain. Energy Fuels 2019, 3, 3455–3461. [Google Scholar] [CrossRef]
  30. Liang, Y.; Zhang, H.; Zhang, J.; Cheng, X.; Zhu, Y.; Luo, L.; Lu, S.; Wei, J.; Wang, H. Porous 2D carbon nanosheets synthesized via organic groups triggered polymer particles exfoliation: An effective cathode catalyst for polymer electrolyte membrane fuel cells. Electrochim. Acta 2020, 332, 135397. [Google Scholar] [CrossRef]
  31. Liu, D.; Li, J.-C.; Shi, Q.; Feng, S.; Lyu, Z.; Ding, S.; Hao, L.; Zhang, Q.; Wang, C.; Xu, M.; et al. Atomically isolated iron atom anchored on carbon nanotubes for oxygen reduction reaction. ACS Appl. Mater. Interfaces 2019, 11, 39820–39826. [Google Scholar] [CrossRef] [PubMed]
  32. Liu, D.; Li, J.; Ding, S.; Lyu, Z.; Feng, S.; Tian, H.; Huyan, C.; Xu, M.; Li, T.; Du, D.; et al. 2D single-atom catalyst with optimized iron sites produced by thermal melting of metal–organic frameworks for oxygen reduction reaction. Small Methods 2020, 4, 1900827. [Google Scholar] [CrossRef]
  33. Xia, D.; Yang, X.; Xie, L.; Wei, Y.; Jiang, W.; Dou, M.; Li, X.; Li, J.; Gan, L.; Kang, F. Direct growth of carbon nanotubes doped with single atomic Fe–N 4 active sites and neighboring graphitic nitrogen for efficient and stable oxygen reduction electrocatalysis. Adv. Funct. Mater. 2019, 29, 190617. [Google Scholar] [CrossRef]
  34. Wang, D.; Ma, Z.; Xie, Y.; Song, H. Characterization of Fe/N-doped graphene as air-cathode catalyst in microbial fuel cells. J. Energy Chem. 2017, 26, 1187–1195. [Google Scholar] [CrossRef]
  35. Kausar, A. Graphene nanoribbon: Fundamental aspects in polymeric nanocomposite. Polym. Technol. Mater. 2019, 58, 579–596. [Google Scholar] [CrossRef]
  36. Cardoso, E.S.F.; Fortunato, G.V.; Maia, G. Modification of C, O, and N groups for oxygen reduction reaction on an electrochemically stabilized graphene nanoribbon surface. J. Phys. Chem. C 2019, 123, 16308–16316. [Google Scholar] [CrossRef]
  37. Dong, H.; Ding, L.; Yan, F.; Ji, H.; Ju, H. The use of polyethylenimine-grafted graphene nanoribbon for cellular delivery of locked nucleic acid modified molecular beacon for recognition of microRNA. Biomaterials 2011, 32, 3875–3882. [Google Scholar] [CrossRef]
  38. Kim, K.; Sussman, A.; Zettl, A. Graphene nanoribbons obtained by electrically unwrapping carbon nanotubes. ACS Nano 2010, 4, 1362–1366. [Google Scholar] [CrossRef]
  39. Zhang, S.; Tang, S.; Lei, J.; Dong, H.; Ju, H. Functionalization of graphene nanoribbons with porphyrin for electrocatalysis and am-perometric biosensing. J. Electroanal. Chem. 2011, 656, 285–288. [Google Scholar] [CrossRef]
  40. Yang, Q.; Xiao, Z.; Kong, D.; Zhang, T.; Duan, X.; Zhou, S.; Niu, Y.; Shen, Y.; Sun, H.; Wang, S.; et al. New insight to the role of edges and heteroatoms in nanocarbons for oxygen reduction reaction. Nano Energy 2019, 66, 104096. [Google Scholar] [CrossRef]
  41. Zhang, J.; Sun, Y.; Zhu, J.; Gao, Z.; Li, S.; Mu, S.; Huang, Y. Ultranarrow graphene nanoribbons toward oxygen reduction and evolution reactions. Adv. Sci. 2018, 5, 1801375. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  42. Xue, L.; Li, Y.; Liu, X.; Liu, Q.; Shang, J.; Duan, H.; Dai, L.; Shui, J. Zigzag carbon as efficient and stable oxygen reduction electrocatalyst for proton exchange membrane fuel cells. Nat. Commun. 2018, 9, 1–8. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  43. Chen, C.; Zhang, X.; Zhou, Z.-Y.; Yang, X.-D.; Zhang, X.-S.; Sun, S.-G. Highly active Fe, N co-doped graphene nanoribbon/carbon nanotube composite catalyst for oxygen reduction reaction. Electrochim. Acta 2016, 222, 1922–1930. [Google Scholar] [CrossRef]
  44. Asensio, Y.; Fernandez-Marchante, C.M.; Lobato, J.; Cañizares, P.; Rodrigo, M.A. Influence of the ion-exchange membrane on the per-formance of double-compartment microbial fuel cells. J. Electroanal. Chem. 2018, 808, 427–432. [Google Scholar] [CrossRef] [Green Version]
  45. Penteado, E.D.; Fernandez-Marchante, C.M.; Zaiat, M.; Gonzalez, E.R.; Rodrigo, M. Influence of carbon electrode material on energy recovery from winery wastewater using a dual-chamber microbial fuel cell. Environ. Technol. 2016, 38, 1333–1341. [Google Scholar] [CrossRef]
  46. Hu, Y.; Jensen, J.O.; Zhang, W.; Cleemann, L.N.; Xing, W.; Bjerrum, N.J.; Li, Q. Hollow spheres of iron carbide nanoparticles encased in graphitic layers as oxygen reduction catalysts. Angew. Chem. Int. Ed. 2014, 53, 3675–3679. [Google Scholar] [CrossRef]
  47. Wen, Z.; Ci, S.; Zhang, F.; Feng, X.; Cui, S.; Mao, S.; Luo, S.; He, Z.; Chen, J. Nitrogen-enriched core-shell structured Fe/Fe3C-C nanorods as advanced electrocatalysts for oxygen reduction reaction. Adv. Mater. 2012, 24, 1399–1404. [Google Scholar] [CrossRef]
  48. Giordano, C.; Kraupner, A.; Fleischer, I.; Henrich, C.; Klingelhöfer, G.; Antonietti, M. Non-conventional Fe3C-based nanostructures. J. Mater. Chem. 2011, 21, 16963–16967. [Google Scholar] [CrossRef]
  49. Singh, K.P.; Bae, E.J.; Yu, J.-S. Fe–P: A new class of electroactive catalyst for oxygen reduction reaction. J. Am. Chem. Soc. 2015, 137, 3165–3168. [Google Scholar] [CrossRef]
  50. Liu, Y.; Liu, H.; Wang, C.; Hou, S.-X.; Yang, N. Sustainable energy recovery in wastewater treatment by microbial fuel cells: Stable power generation with nitrogen-doped graphene cathode. Environ. Sci. Technol. 2013, 47, 13889–13895. [Google Scholar] [CrossRef]
  51. Liu, Y.; Jin, X.-J.; Dionysiou, D.D.; Liu, H.; Huang, Y. Homogeneous deposition-assisted synthesis of iron–nitrogen composites on graphene as highly efficient non-precious metal electrocatalysts for microbial fuel cell power generation. J. Power Sources 2015, 278, 773–781. [Google Scholar] [CrossRef]
  52. Zhao, J.; Fu, N.; Liu, R. Graphite-wrapped fe core–shell nanoparticles anchored on graphene as pH-universal electrocatalyst for oxygen reduction reaction. ACS Appl. Mater. Interfaces 2018, 10, 28509–28516. [Google Scholar] [CrossRef] [PubMed]
  53. Jiang, W.-J.; Gu, L.; Li, L.; Zhang, Y.; Zhang, X.; Zhang, L.-J.; Wang, J.-Q.; Hu, J.-S.; Wei, Z.; Wan, L.-J. Understanding the high activity of Fe–N–C electrocatalysts in oxygen reduction: Fe/Fe3C nanoparticles boost the activity of Fe–Nx. J. Am. Chem. Soc. 2016, 138, 3570–3578. [Google Scholar] [CrossRef] [PubMed]
Nanomaterials 11 00377 g001 550
Figure 1. Illustration of the preparation process for Fe-N co-doped graphene nanoribbon@carbon nanotube (GNR@CNT precursor).
Figure 1. Illustration of the preparation process for Fe-N co-doped graphene nanoribbon@carbon nanotube (GNR@CNT precursor).
Nanomaterials 11 00377 g001
Nanomaterials 11 00377 g002 550
Figure 2. TEM images of: (A) pure multiwall carbon nanotube (MW-CNT) and (B,C) GNR@CNT; (D) XRD patterns of pure CNT and GNR@CNT; (E) Raman spectra of pristine CNT and GNR@CNT.
Figure 2. TEM images of: (A) pure multiwall carbon nanotube (MW-CNT) and (B,C) GNR@CNT; (D) XRD patterns of pure CNT and GNR@CNT; (E) Raman spectra of pristine CNT and GNR@CNT.
Nanomaterials 11 00377 g002
Nanomaterials 11 00377 g003 550
Figure 3. XRD patterns of Fe-N/GNR@CNT samples changing with the FeCl3 doping content.
Figure 3. XRD patterns of Fe-N/GNR@CNT samples changing with the FeCl3 doping content.
Nanomaterials 11 00377 g003
Nanomaterials 11 00377 g004 550
Figure 4. Electricity production performance of the microbial fuel cells (MFCs) using the catalysts with different Fe-doping contents: (A) power density curves; (B) polarization curves; and (C) the anode and cathode polarization curves.
Figure 4. Electricity production performance of the microbial fuel cells (MFCs) using the catalysts with different Fe-doping contents: (A) power density curves; (B) polarization curves; and (C) the anode and cathode polarization curves.
Nanomaterials 11 00377 g004
Nanomaterials 11 00377 g005 550
Figure 5. Electricity production performance of the MFCs using the catalysts with different N-doping contents. (A) The voltage output variation trend of the MFCs; (B,C) The power density and polarization curves of the MFCs, respectively; (D) The anode and cathode polarization curves.
Figure 5. Electricity production performance of the MFCs using the catalysts with different N-doping contents. (A) The voltage output variation trend of the MFCs; (B,C) The power density and polarization curves of the MFCs, respectively; (D) The anode and cathode polarization curves.
Nanomaterials 11 00377 g005
Nanomaterials 11 00377 g006 550
Figure 6. Deconvolution of N1s XPS spectra of: (A) Fe-N/C-1:2:4; (B) Fe-N/C-1:4:4; (C) Fe-N/C-1:8:4; and (D) Fe-N/C-1:16:4.
Figure 6. Deconvolution of N1s XPS spectra of: (A) Fe-N/C-1:2:4; (B) Fe-N/C-1:4:4; (C) Fe-N/C-1:8:4; and (D) Fe-N/C-1:16:4.
Nanomaterials 11 00377 g006
Nanomaterials 11 00377 g007 550
Figure 7. The N2 adsorption–desorption isotherms (A) and the corresponding pore size distributions (B) of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4.
Figure 7. The N2 adsorption–desorption isotherms (A) and the corresponding pore size distributions (B) of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4.
Nanomaterials 11 00377 g007
Nanomaterials 11 00377 g008 550
Figure 8. (A) The LSV curves of the Fe-N/GNR@CNT-1:4:4 and Pt/C; (B,C) The LSV curves of Fe-N/C-1:4:4 and Pt/C at different rotating speeds. Insets: K–L plots.
Figure 8. (A) The LSV curves of the Fe-N/GNR@CNT-1:4:4 and Pt/C; (B,C) The LSV curves of Fe-N/C-1:4:4 and Pt/C at different rotating speeds. Insets: K–L plots.
Nanomaterials 11 00377 g008
Table
Table 1. The content of surface elements and different N species of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4 materials tested by XPS.
Table 1. The content of surface elements and different N species of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4 materials tested by XPS.
Fe-N/C-1:2:4(at. %)Fe-N/C-1:4:4(at. %)Fe-N/C-1:8:4(at. %)Fe-N/C-1:16:4(at. %)
C85.4983.9485.3285.14
N7.578.447.958.42
Fe1.201.641.501.50
O5.595.685.034.77
S0.150.300.200.16
Pyridinic-N46.6749.5432.8241.95
Pyrrolic-N21.5724.3527.5435.57
Graphitic-N17.2920.9124.719.14
Oxidized-N14.475.2014.9312.34
Table
Table 2. The summary of the BET specific area of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4.
Table 2. The summary of the BET specific area of Fe-N/C-1:2:4, Fe-N/C-1:4:4, Fe-N/C-1:8:4, and Fe-N/C-1:16:4.
Micropore Area
(m2·g−1)		External Surface Area
(m2·g−1)		BET Surface Area
(m2·g−1)
Fe-N/C-1:2:479.4272.9352.3
Fe-N/C-1:4:422.5174.9197.4
Fe-N/C-1:8:49.763.973.6
Fe-N/C-1:16:443.7194.2237.9
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Zhang, M.; Ma, Z.; Song, H. Preparation and Application of Fe-N Co-Doped GNR@CNT Cathode Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells. Nanomaterials 2021, 11, 377. https://doi.org/10.3390/nano11020377

AMA Style

Zhang M, Ma Z, Song H. Preparation and Application of Fe-N Co-Doped GNR@CNT Cathode Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells. Nanomaterials. 2021; 11(2):377. https://doi.org/10.3390/nano11020377

Chicago/Turabian Style

Zhang, Man, Zhaokun Ma, and Huaihe Song. 2021. "Preparation and Application of Fe-N Co-Doped GNR@CNT Cathode Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells" Nanomaterials 11, no. 2: 377. https://doi.org/10.3390/nano11020377

APA Style

Zhang, M., Ma, Z., & Song, H. (2021). Preparation and Application of Fe-N Co-Doped GNR@CNT Cathode Oxygen Reduction Reaction Catalyst in Microbial Fuel Cells. Nanomaterials, 11(2), 377. https://doi.org/10.3390/nano11020377

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop