Next Article in Journal / Special Issue
Sensors Based on the Carbon Nanotube Field-Effect Transistors for Chemical and Biological Analyses
Previous Article in Journal
Strongly Improving the Sensitivity of Phosphorescence-Based Optical Oxygen Sensors by Exploiting Nano-Porous Substrates
Previous Article in Special Issue
A Highly Integrated and Diminutive Fluorescence Detector for Point-of-Care Testing: Dual Negative Feedback Light-Emitting Diode (LED) Drive and Photoelectric Processing Circuits Design and Implementation
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Biosensors
Volume 12
Issue 10
10.3390/bios12100775
biosensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets

by
Hao Huang
1,†,
Chuanxiang Zhang
2,†,
Jie Zhou
1,
Dan Wei
1,
Tingting Ma
1,
Wenfei Guo
1,
Xueying Liu
1,
Song Li
1,* and
Yan Deng
1,*
1
Hunan Key Laboratory of Biomedical Nanomaterials and Devices, Hunan University of Technology, Zhuzhou 412007, China
2
College of Packing and Materials Engineering, Hunan University of Technology, Zhuzhou 412007, China
*
Authors to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Biosensors 2022, 12(10), 775; https://doi.org/10.3390/bios12100775
Submission received: 23 July 2022 / Revised: 4 September 2022 / Accepted: 15 September 2022 / Published: 20 September 2022
(This article belongs to the Special Issue Materials and Techniques for Bioanalysis and Biosensing)
Browse Figures
Review Reports Versions Notes

Abstract

:
A label-free fipronil aptasensor was built based on Polylysine-black phosphorus nanosheets composition (PLL-BPNSs) and Au nanoparticles (AuNPs). A PLL-BP modified glassy carbon electrode (GCE) was fabricated by combining BP NSs and PLL, which included a considerable quantity of -NH2. Au nanoparticles (AuNPs) were placed onto the GCE, and PLL-BPNSs bonded to Au NPs firmly by assembling. The thiolated primers were then added and fixed using an S-Au bond, and competitive binding of the fipronil aptamer was utilized for fipronil quantitative assessment. The sensor’s performance was evaluated using differential pulse voltammetry (DPV) method. The linear equation is ΔI (μA) = 13.04 logC + 22.35, while linear correlation coefficient R2 is 0.998, and detection limit is 74 pg/mL (0.17 nM) when the concentration of fipronil is 0.1 ng/mL–10 μg/mL. This aptasensor can apply to quantitative detection of fipronil.

1. Introduction

Pesticides have made significant contributions to pest control and agricultural output [1]. Fipronil (FP) is a very effective phenylpyrazole insecticide and is now widely used in agriculture [2]. FP is a process-targeted pesticide that has remarkable insect selectivity. However, inadvertent contact, incorrect use of FP, or widespread use of FP may pollute water and soil, causing a range of harmful consequences in animals and people, including neurotoxicity, hepatotoxicity, nephrotoxicity, and reproductive and cytotoxic effects in vertebrates and invertebrates [3,4,5,6]. Headaches, dizziness, sweating, and other symptoms have been described because of fipronil poisoning in humans [7]. Currently, the most common techniques for detecting fipronil are gas chromatography-mass spectrometry (GC-MS), liquid chromatography-mass spectrometry (LC-MS), and gas chromatography (GC) [8,9,10]. However, these traditional methods have challenges, such as complex sample pretreatment, high cost, and dependence on trained staff. As a result, it is critical to design a technique for detecting fipronil residues that is both quick and easy. Biosensors, as an alternate tool for pesticide detection, have received a lot of attention in recent decades. Electrochemical biosensors, as a cost-effective and portable analytical approach, overcome the limitations of traditional methods by providing high sensitivity, selectivity, and response time, as well as demonstrating significant potential in field tests. Black phosphorus nanosheets (BPNSs) are a new two-dimensional material with several distinguishing characteristics, including great biocompatibility, outstanding anisotropy and conductivity, high carrier mobility, and a programmable energy band gap [11,12,13,14]. BPNSs are often used for sensor preparation and application due to their great performance, and can be prepared by mechanical exfoliation, liquid exfoliation, chemical synthesis, and electrochemical exfoliation [15,16,17,18]. However, black phosphorus is unstable and easily degraded in air and water, and this degradation will be intensified under visible light irradiation, which also limits the application of black phosphorus [19]. The modification and functionalization of BPNSs improved the sensor’s stability, sensitivity, selectivity, and biocompatibility. Polymer poly-L-lysine (PLL) is a cationic polymer with good biocompatibility. The non-covalent electrostatic interaction between BPNSs and PLL not only retains the original wrinkled honeycomb structure of BP, but also enhances the stability and dispersion of BP in aqueous solution, which provides the possibility for preparation of stable biosensors [20,21].
Aptamers (Apt) are a class of oligonucleotide fragments screened from the oligonucleotide library that can identify targets [22,23], which show a very high affinity for their targets, comparable to those of some monoclonal antibodies, sometimes even better [24]. The fitness has a number of advantages over antibodies, including ease of manufacture, cheap production costs, minimal batch differences, reversible folding properties, and low immunogenicity [25]. However, the true value of the aptamer lies in its simplicity; these molecules may be built to function as sensors, actuators, and other devices, which are typically at the heart of new innovations [26,27,28,29,30].
Au nanoparticles (AuNPs) are widely believed to improve the detection speed and stability of biosensors [31]. AuNPs can increase DNA immobilization and signal amplification on electrode surface, enhancing the modified surface’s hybridization capacity for sensitivity detection [32,33,34]. In summary, the goal of this study was to develop an aptamer sensor based on BPNSs with high sensitivity and specificity for detecting the presence of fipronil in agricultural residues, using PLL-BP and AuNPs modified glassy carbon electrodes to build a sensitive sensing platform. The Fipronil aptamer was efficiently fixed using a thiolated primer modified sensing platform, and then the fipronil aptamer was modified to precisely recognize fipronil in the sample. Differential pulse voltammetry (DPV) was used to determine the amount of fipronil in the sample. The sensor offers outstanding repeatability, stability, and specificity, as well as a wide range of applications.

2. Materials and Methods

2.1. Materials and Reagents

Mercaptoethanol (MCH) was purchased from Tokyo Chemical Industry Co., Ltd. (Shanghai, China). Fipronil (Fp), aldicarb sulfoxide (As), fenitrothion (Ft), carbofuran (Cf), and aldicarb (Ac) were obtained from Tanmo Quality Inspection Technology Co., Ltd. Tris-(2-carboxyethyl)-phosphine hydrochloride (TCEP), Tween 20, and polylysine (PLL) were obtained from Bioengineering Shanghai Co., Ltd. Potassium hexacyanoferrate(III) (K3Fe(CN)6), and potassium chloride (KCl) were obtained from Sinopharm Group Chemical Reagent Co., Ltd. (Shanghai, China). All the reagents were of analytical grade. The required aptamer sequence [TGTACCGTCTGAGCGATTCGTACAGTTTCTGGAGGACTGGGCGGGGTGACGGTTATGAGCAGTCAGTGTTAAGGAGTGC] and thiolated primers [GCACTCCTTAACACTGACTGGCT-SH] were synthesized by Sangon Biological Engineering Technology and Services Co., Ltd. (Shanghai, China). Ultrapure was purchased from A.S. Watson Group (Hong Kong, China).

2.2. Apparatus

The as-prepared BPNSs and PLL-BPNSs composition (PLL-BP) were observed on high resolution transmission electron microscopy (HR-TEM, Tecnai G2 F20, FEI Ltd., Natural Bridge Station, VA, USA) The combination comprising black phosphorus nanosheets and polylysine was characterized using Fourier transform infrared spectroscopy (FTIR, Tensor II, Bruker Ltd., Billerica, MA, USA) All electrochemical experiments were measured on a PGST AT302N Electrochemical Workstation (Metrohm, Herisau, Switzerland). A conventional three electrode system was used, in which a saturated calomel electrode, platinum wire electrode, and bare GCE or Au/PLL-BP/GCE (diameter: 3.0 mm) were adopted as the reference electrode, counter electrode and working electrode, respectively.

2.3. Preparation of BPNSs

BPNSs were prepared by exfoliation of BP crystals, as previously reported [35]. Briefly, 5.0 mg of BP crystals were added into 10 mL of ultrapure water solution (containing 1% (v/v) Tween-20), and sonicated in an ice bath for 8 h. Then, the obtained brown suspension was centrifuged at 3000× g rpm for 30 min, to remove the residual unexfoliated particles, and the supernatant was gathered in the atmosphere of argon. The gathered supernatant was further centrifuged at 8000× g rpm for 30 min, and brown-yellow supernatant was collected for future use.

2.4. Fabrication of PLL-BPNSs Composition

To synthesize PLL-BPNSs composition, the as-exfoliated BPNSs dispersion was combined with 2 mg/mL PLL (prepared with deoxygenated distilled water), and the resultant mixture solution was agitated for 2 h in a shaker, and then incubated for 12 h at 4 °C.

2.5. Preparation of Apt/AuNPs/PLL- BPNSs/GCE Electrode

Bare GCE (diameter: 3 mm) was polished on the polishing cloth with 0.05 μm alumina slurry, and completely cleaned by ultrasonication in ethanol and ultrapure water for 1 min in sequence, followed by drying with argon for later use. The prepared PLL-BPNSs suspension (3 μL) was directly pipetted onto the polished GCE and dried for 12 h at room temperature in an argon atmosphere to obtain PLL-BP/GCE. Then, 3 μL 1 mM AuNPs were dropped onto the PLL-BP complex membrane and dried to form AuNPs/PLL-BP/GCE electrodes under protection of argon. Next, 5 μL of 1 μM activated sulfhydryl primers by TCEP were dropped onto the AuNPs and incubated at room temperature for 40 min. The prepared electrode was placed at room temperature for a period of time, and 5 μL of 1 μM fipronil aptamer was added onto the electrode surface modified with sulfhydryl primer. After the fipronil aptamer reacted with the primer for 1 h, the non-specifically boundfipronil aptamer was gently washed off with PBS buffer (10 mM, pH 7.4) to obtain Apt/primer/AuNPs/PLL- BP/GCE electrodes, as shown in Scheme 1.

2.6. Electrochemical Detection of Fipronil

The surface of modified aptamer sensor was dripped with 5 μL of fipronil solution at different concentrations (10 pg.mL−1–10 μg. mL−1), and incubated at room temperature for 60 min. After the fipronil aptamer was fully combined with fipronil in the solution, it was rinsed slightly in phosphate buffer. The modified electrodes were characterized by electrochemical impedance spectroscopy (EIS). EIS was performed within the frequency range between 0.1 to 105 Hz, in 10 mM PBS buffer solutions containing 0.5 mM K3[Fe(CN)6] and 0.1 M KCl. The concentration of fipronil in the samples was determined by DPV method. The DPV parameters were: scanning range between −0.2 to −0.6 V, amplitude of 0.05 V, pulse width of 0.2 s, and pulse time of 0.5 s.

3. Results and Discussion

3.1. Characterization of PLL–BPNSs Nanocomposite

The structure of BPNSs prepared in Tween-20 aqueous solution before and after coating with polylysine was analyzed by transmission electron microscopy (TEM).
As shown in Figure 1A, the prepared BPNSs displays free-standing few layer nanosheets with an average sheet diameter of about 600 nm in the low magnification TEM images. Figure 1B–D depicts the fabricated PLL-BPNSs complexes under a low-power transmission electron microscope. BPNSs are scattered in polylysine and well coated with polylysine, and the surface roughness increased significantly when the BPNSs reacted with polylysine. The outer surface of the few-layer BPNSs was completely covered, resulting in morphological alterations.
The combination comprising of black phosphorus nanosheets and polylysine was characterized using Fourier transform infrared spectroscopy (FTIR). As shown in Figure 2, there are two prominent peaks at 1636.96 cm−1 and 3450.88 cm−1, which correspond to bending and stretching vibrations of NH, respectively. This is a critical indication of successful polylysine formation, and 679.35 cm−1 was the out-of-plane absorption peak for CH, suggesting that the black phosphorus nanosheets with polylysine were effectively coupled.

3.2. Electrochemical Characterization of Modified Electrodes

It is well known that graphene (GP) and AuNPs are traditional nanomaterials that are widely used in electrochemical sensors, due to their large specific surface area and high conductivity. In order to confirm that black phosphorus nanomaterials have better electron transfer performance compared with other nanomaterials, PLL-BP, PLL-AuNPs, and PLL-GP were obtained by mixing the same concentration of polylysine with the same mass concentration of black phosphorus nanosheet dispersion, gold nanoparticle concentrate, and graphene dispersion, respectively (this mass concentration is calculated from the absorbance of the dispersion). The GCE was modified with these three composite materials, respectively, and completely dried under argon environment. Cyclic voltammetry (CV) was used for characterization in the K3[Fe (CN)6] mixture system. As shown in Figure 3, the redox peak currents of three composite modified GCE are higher than the bare electrode, but that of PLL-BPNSs/GCE (red line) was much higher than the bare and PLL-Au NPs/GCE, PLL-GP/GCE for K3[Fe (CN)6] probe, and the peak potential difference (ΔE) was minimum. This means that the PLL-BP modified electrode surface was conducive to the transmission of probe ions on the electrode surface, and the conductivity was greatly enhanced. Thus, it can be shown that, compared with other traditional nanomaterials, black phosphorus nanomaterials have more superior electronic transmission performance, and can be used as an outstanding sensor preparation material in the sensing design strategy for effectively increasing electrical signals.
To investigate the interfacial transmission characteristics of the modified electrode, electrochemical impedance spectroscopy (EIS) tests were performed on GCE, PLL-BP/GCE, AuNPs/PLL-BP/GCE, primer/AuNPs/PLL-BP/GCE, and Apt/primer/AuNPs/PLL-BP/GCE in 10 mM PBS buffer containing 0.1 M KCl and 0.5 mM K3 [Fe (CN)6]. To match the experimental data, the Randles equivalent circuit model was employed, where Rs denotes the electrolyte resistance, Rct denotes the charge transfer resistance, C denotes the double capacitor, and W is the Warburg impedance. Generally, the semicircle diameter in Nyquist plots for the EIS is equal to the value of electron-transfer resistance (Rct). It can be observed from Figure 4. that the impedance value for the bare GCE decreased after modification by the PLL-BPNSs it decreased, which can be reflected by the reduction in the semicircle diameter (Rct) of the Nyquist curve. Due to the high electron mobility of the BPNSs, the electron transfer rate at the glassy carbon electrode interface increased, and the current hindrance decreased. After further modification with AuNPs, the electron transfer rate was further accelerated due to the huge quantity and large specific surface area of AuNPs, and the impedance semicircle diameter was further reduced. However, once the sulfhydryl primers were covalently modified to the electrode surface through Au-S bonds, the DNA primers were unable to transmit electricity, and the addition of DNA primers increased steric hindrance. This hindered the electron transfer, thus the measured impedance value for the electrode surface increased significantly. Finally, when the DNA primers were hybridized with free fipronil aptamers in the solution, the semicircle diameter of the Nyquist curve further increased, and the measured impedance was at maximum. This was because a specific combination of aptamers and primers further increased the steric hindrance of the electrode, and the sensor was successfully established and verified.

3.3. Optimization of Recognition Conditions

AuNPs and thiol primers interact through the formation stably Au-S covalent bond. In this study, AuNPs were modified on the electrode coated with PLL-BPNSs composite to further amplify the electrical signal. The large specific surface area of AuNPs makes for stable binding with thiol primers. Different doses of AuNPs, 100, 200, 300, 400, and 500 ng, were, respectively, added to the prepared PLL-BP/GCE electrode surface and dried, and DPV measurements were performed with electrodes in the K3 [Fe (CN)6] mixed system. The results are shown in Figure 5A. As can be seen, the current increases with increasing amounts of AuNPs, reaching a maximum at 300 ng, followed by a montonic decrease as the amount of gold is increased. This is an indication that at more than 300 ng, the AuNPs form a thick layer, which results in a decrease in the peak current.
Thethiol primers play the role of bridge between aptamer and electrode surface, so the incubation time for thiol primers on the electrode also determines the performance of the aptamer sensor. A total of 5 μL of 1 μM thiol primers activated by 1 mM TCEP were added onto AuNPs films on different AuNPs/PLL-BP/GCE electrodes, and then incubated on the electrode for 10–70 min, respectively. Similarly, DPV detection was performed in the K3[Fe (CN)6] mixture system. The ΔIpeak for DPV shown in Figure 5B is the difference between the actual measured value and the blank background current, which is an indication of the binding of the primers on the electrode surface. As can be seen in Figure 5B, the primer binds to the electrode surface in about 50 min, as shown by the leveling of the current value.
The aptamers and primers were effectively combined by hydrogen bonding, and the aptamers were enriched on the electrode surface via hydrogen bonding between base pairs. In order to reduce the preparation time for the sensor, the bonding time between fipronil aptamer and mercapto primer should also be optimized. The prepared Primer/AuNPs/PLL-BP/GCE electrode surface was blocked with MCH blocking solution for half an hour. The blocking solution blocked the remaining active sites on the electrode surface to prevent its non-specific adsorption. A total of 5 μL of 1 μM fipronil aptamers were dropped onto the modified electrode surface and incubated for 10–70 min, respectively, and the incubation progress was detected. As shown in Figure 5C, the peak change value for the DPV current steadily reduced with time in the K3[Fe (CN)6] mixed solution system, and stabilized after 50 min of incubation. It can be seen that, the primers on the electrode surface were sufficiently combined with the fipronil aptamer, and the bonding of the aptamer led to greater biological molecular weight on the electrode surface, which made the electrolysis system gradually stable. Therefore, it was concluded that the optimal incubation time for fipronil aptamer was 50 min.

3.4. Detection of Fipronil on Apt/Primer/AuNPs/PLL-BP/GCE

When the electrolyte solution contains fipronil pesticide, the fipronil aptamer can specifically recognize and capture fipronil in the solution, which makes the structure and morphology of the fipronil aptamer change. The binding of fipronil to aptamer generates the spatial conformation of aptamer. Due to the effect of spatial conformation, the aptamer is separated from the primer and results in the change of the surface state of the electrode. As a result, the electronic transmission obstacle decreases, and the peak current for the detection system increases. Figure 6A shows the current response of Apt/primer/AuNPs/PLL-BP/GCE to different concentrations of fipronil. The current gradually increased with increased fipronil concentration. The reason is that more aptamers were specifically bound to fipronil and separated from the primers with increased fipronil concentration, which accelerated the electron transfer on the sensor surface. As shown in Figure 6B, the logarithmic values for ∆IDPV and CFp for the fipronil aptamer sensor were positively correlated across concentration gradient of 0.1 ng/mL–10 μg/mL fipronil, and the sensor’s linear fitting equation was: ∆I (μA) = 13.04 logC + 22.35, with a linear correlation coefficient R2 of 0.998, and detection limit at 74 pg/mL (0.17 nM).

3.5. Stability, Reproducibility and Specificity

Under the parameters described above, fipronil concentrations of 1 ng/mL were measured six times in parallel, and the peak current for the detection resulted in a relative standard deviation of about 2.39%, with repeatability meeting the criteria of usage. To evaluate the stability of the aptasensor, the PLL-BP-Apt sensor was used to measure the current response at various time intervals, namely by adding 10 μg mL−1 fipronil to PBS samples on day 0, day 7, and day 14. These findings indicated that the current of fipronil in PBS did not substantially drop after 14 days (26.43%), suggesting that the developed aptasensor exhibited high storage stability.
The sensor’s specificity is also critical. If the aptamer sensor matches, the detector’s specificity for fipronil must be confirmed using other pesticide interferents. The blank was the sensor without fipronil in PBS buffer, and 10 ng/mL aldicarb sulfoxide (As), fenitrothion (Ft), carbofuran (Cf), aldicarb (Ac), and fipronil (Fp) were employed in the test. For the specificity study, the aptamer sensor was incubated with the four pesticides listed above and a mixture (Mix) comprising the target assay (Fp) and the mixture. The specificity was assessed by the difference between the peak DPV of each pesticide compared to the blank. As seen in Figure 7, the experimental group containing fipronil solution and a combination of pesticides, including fipronil, exhibited much greater fluctuations in the DPV peak than the other pesticides, showing that the sensor has a greater selectivity for fipronil.

3.6. Sample Analysis and Analyte Detection

To validate the sensor’s effectiveness in actual sample detection, we used the standard addition method to detect fipronil samples at the following concentrations; 10 ng/mL, 100 ng/mL, and 1 μg/mL in Shenlong Lake water samples. The recoveries were 107.9%, 100.69%, and 84.1%, respectively, with relative standard deviation (RSD) (n = 3) of 0.61%, 8.23%, and 5.58%, as shown in Table 1. The two-dimensional sensing platform created provides a high degree of selectivity and sensitivity. Simultaneously, we also compared the experimental results with those from other methods described in recent reports. As shown in Table 2, this method demonstrated a relatively wide linear range and a comparable limit of detection with the other methods. Although the sensor in the literature [36] has a low detection limit for fipronil, it uses a high-cost small molecule antigen antibody and is difficult to prepare. Another sensor with a lower detection limit in the literature [37] uses molecular imprinting, which can detect only a narrow range of concentrations. Thus, the developed method is well applicable for fipronil detection in real samples.

4. Conclusions

In summary, a new aptasensor based on PLL-BPNSs and AuNPs is fabricated. PLL-BPNSs was prepared using PLL, which functionalized the surface of BP nanosheets by non-covalent interaction. AuNPs bonded to PLL-BPNSs firmly to give AuNPs/PLL-BP by assembling. The assembled AuNPs/PLL-BP matrix is desirable for increasing electron transfer and bonding thio primers. The particular DNA aptamers were used targeting and binding fipronil. The chosen DNA aptamers were effectively combined with primers and enriched on the electrode surface via hydrogen bonding between base pairs. The AuNPs/PLL-BP nanostructure DNA aptasensor is a label-free electrochemical sensing platform for fipronil. The electron transport was detected on the primer/AuNPs/PLL-BP electrode in K3[Fe (CN)6] mixed liquid system. Through the synergistic impact of chosen high affinity aptamers and increased electrochemical performance of nanostructures, the sensor displayed great selectivity and sensitivity. The detection limit of the sensor was 74 pg/mL, and the linear range was 0.1 ng/mL–10 μg/mL. Our discovery brings up numerous fascinating options to develop improved rapid detection of fipronil.

Author Contributions

H.H. and C.Z., Conceptualization, Methodology, Supervision, Project administration, Funding acquisition, and Writing—Review and Editing. J.Z., Methodology, Validation, Investigation, and Writing—Original Draft. D.W., Methodology, Investigation, and Writing—Review and Editing. T.M. and W.G., Methodology, Investigation, and Writing—Review and Editing. X.L., Validation, Investigation, and Writing—Original Draft. S.L., Methodology, Validation, and Investigation. Y.D., Writing—Review and Editing, Project administration, and Funding acquisition. All authors have read and agreed to the published version of the manuscript.

Funding

This work was financially supported by the National Natural Science Foundation of China (Nos. 61871180, 61971187), Natural Science Foundation of Hunan Province of China (2022JJ30230, 2021JJ30213), Hunan Provincial Innovation Foundation for Postgraduate (CX20211074), and open Funding of State Key Laboratory of Oral Diseases (SKLOD2022OF05).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Yang, J.; Chen, S.W.; Zhang, B.W.; Tu, Q.; Wang, J.Y.; Yuan, M.S. Non-biological fluorescent chemosensors for pesticides detection. Talanta 2022, 240, 123200. [Google Scholar] [CrossRef] [PubMed]
  2. Tingle, C.C.; Rother, J.A.; Dewhurst, C.F.; Lauer, S.; King, W.J. Fipronil: Environmental fate, ecotoxicology, and human health concerns. Rev. Environ. Contam. Toxicol. 2003, 176, 1–66. [Google Scholar] [PubMed]
  3. Ichikawa, H. Neurotoxicology of pesticides. Brain Nerve 2015, 6739–6748. [Google Scholar] [CrossRef]
  4. Gutta, S.; Prasad, J.D.; Gunasekaran, K.; Iyadurai, R. Hepatotoxicity and neurotoxicity of Fipronil poisoning in human: A case report. J. Fam. Med. Prim. Care 2019, 8, 3437. [Google Scholar]
  5. Khalaf, A.A.; Ibrahim, M.A.; Galal, M.K.; Abdallah, A.A.; Mansour, R.; Afify, M.M. The protective effects of Terminalia laxiflora extract on hepato-nephrotoxicity induced by fipronil in male rats. Environ. Sci. Pollut. R. 2020, 27, 39507–39515. [Google Scholar] [CrossRef]
  6. Wang, X.; Martínez, M.A.; Wu, Q.H.; Ares, I.; Martinez-Larranaga, M.R.; Anadón, A.; Yuan, Z.H. Fipronil insecticide toxicology: Oxidative stress and metabolism. Crit. Rev. Toxicol. 2016, 46, 876–899. [Google Scholar] [CrossRef]
  7. Kim, Y.A.; Yoon, Y.S.; Kim, H.S.; Jeon, S.J.; Cole, E.; Lee, J.S.; Kho, Y.; Cho, Y.H. Distribution of fipronil in humans, and adverse health outcomes of in utero fipronil sulfone exposure in newborns. Int.J. Hyg. Environ. Health 2019, 222, 524–532. [Google Scholar] [CrossRef]
  8. Araujo, L.; Troconis, M.E.; Cubillán, D.; Mercado, J.; Villa, N.; Prieto, A. Single drop microextraction and gas chromatography–mass spectrometry for the determination of diflufenican, mepanipyrim, fipronil, and pretilachlor in water samples. Environ. Monit. Assess. 2013, 185, 10225–10233. [Google Scholar] [CrossRef]
  9. Wang, T.L.; Hu, J.Y.; Liu, C.L. Simultaneous determination of insecticide fipronil and its metabolites in maize and soil by gas chromatography with electron capture detection. Environ. Monit. Assess. 2014, 186, 2767–2774. [Google Scholar] [CrossRef]
  10. Cheng, Y.P.; Dong, F.S.; Liu, X.G.; Xu, J.; Meng, W.; Liu, N.; Chen, Z.L.; Tao, Y.; Zheng, Y.Q. Simultaneous determination of fipronil and its major metabolites in corn and soil by ultra-performance liquid chromatography-tandem mass spectrometry. Anal. Methods-UK 2014, 6, 1788–1795. [Google Scholar] [CrossRef]
  11. Ghambarian, M.; Ghashghaee, M.; Azizi, Z.; Balar, M. Molecular interactions of MeOH and EtOH with black phosphorus monolayer: A periodic density functional study. Phys. Chem. Res. 2019, 7, 435–447. [Google Scholar]
  12. Li, C.; Si, L.; Feng, X.W.; Wang, L.; Huang, X.; Tee, B.C.-K.; Ang, K.W. Gigahertz integrated circuits based on complementary black phosphorus transistors. Adv. Electron. Mater. 2018, 4, 1800274. [Google Scholar]
  13. Cho, S.Y.; Lee, Y.H.; Koh, H.J.; Jung, H.; Kim, J.S.; Yoo, H.W.; Kim, J.; Jung, H.T. Superior chemical sensing performance of black phosphorus: Comparison with MoS2 and graphene. Adv. Mater. 2016, 28, 7020–7028. [Google Scholar] [CrossRef]
  14. Rong, X.M.; Yu, Z.Z.; Wu, Z.W.; Li, J.J.; Wang, B.; Wang, Y. First principles modeling of pure black phosphorus devices under pressure. Beilstein J. Nanotech. 2019, 10, 1943–1951. [Google Scholar] [CrossRef]
  15. Luo, W.; Zemlyanov, D.Y.; Milligan, C.A.; Du, Y.C.; Yang, L.M.; Wu, Y.Q.; Peide, D.Y. Surface chemistry of black phosphorus under a controlled oxidative environment. Nanotechnology 2016, 27, 434002. [Google Scholar] [CrossRef]
  16. Brent, J.R.; Savjani, N.; Lewis, E.A.; Haigh, S.J.; Lewis, D.J.; O’Brien, P. Production of few-layer phosphorene by liquid exfoliation of black phosphorus. Chem. Commun. 2014, 50, 13338–13341. [Google Scholar] [CrossRef]
  17. Gusmao, R.; Sofer, Z.; Pumera, M. Black phosphorus rediscovered: From bulk material to monolayers. Angew. Chem. Int. Ed. 2017, 56, 8052–8072. [Google Scholar] [CrossRef] [PubMed]
  18. Liang, Q.; Wu, L.P.; Kattel, B.; Li, C.H.; Yong, Z.; Hou, Y.B.; Wu, J.; Chan, W.L. Using bulk heterojunctions and selective electron trapping to enhance the responsivity of perovskite–graphene photodetectors. Adv. Funct. Mater. 2017, 27, 1704173. [Google Scholar] [CrossRef]
  19. Favron, A.; Gaufrès, E.; Fossard, F.; Lévesque, P.L.; Phaneuf-L’Heureux, A.; Tang, N.Y.; Loiseau, A.; Leonelli, R.; Francoeur, S.; Martel, R. Photooxidation and quantum confinement effects in exfoliated black phosphorus. Nature Mater. 2015, 14, 826–832. [Google Scholar] [CrossRef]
  20. Zhao, Y.; Zhang, Y.H.; Zhuge, Z.; Tang, Y.H. Synthesis of a Poly-L-Lysine/Black Phosphorus Hybrid for Biosensors. Anal. Chem. 2018, 90, 3149–3155. [Google Scholar] [CrossRef]
  21. Kumar, V.; Brent, J.R.; Shorie, M.; Kaur, H.; Chadha, G.; Thomas, A.G.; Lewis, E.A.; Rooney, A.P.; Nguyen, L.; Zhong, X.L.; et al. Nanostructured Aptamer-Functionalized Black Phosphorus Sensing Platform for Label-Free Detection of Myoglobin, a Cardiovascular Disease Biomarker. ACS Appl. Mater. Interfaces 2016, 8, 22860–22868. [Google Scholar] [CrossRef] [PubMed]
  22. Ellington, A.D.; Szostak, J.W. In vitro selection of RNA molecules that bind specific ligands. Nature 1990, 346, 818–822. [Google Scholar] [CrossRef] [PubMed]
  23. Yang, G.J.; Liu, Y.; Deng, Y.; Chen, Z.; Chen, H.; Li, S.; He, N.Y. Selection of a high-affinity DNA aptamer for the recognition of cadmium ions. J. Biomed. Nanotechnol. 2021, 17, 2240–2246. [Google Scholar] [CrossRef] [PubMed]
  24. Tombelli, S.; Minunni, M.; Mascini, M. Analytical applications of aptamers. Biosens. Bioelectron. 2005, 20, 2424–2434. [Google Scholar] [CrossRef]
  25. Song, S.P.; Wang, L.H.; Li, J.; Fan, C.H.; Zhao, J.L. Aptamer-based biosensors. TrAC-Trends Anal. Chem. 2008, 27, 108–117. [Google Scholar] [CrossRef]
  26. Sun, H.G.; Zu, Y.L. A highlight of recent advances in aptamer technology and its application. Molecules 2015, 20, 11959. [Google Scholar] [CrossRef]
  27. Guo, W.F.; Zhang, C.X.; Ma, T.T.; Liu, X.Y.; Chen, Z.; Li, S.; Deng, Y. Advances in aptamer screening and aptasensors’ detection of heavy metal ions. J. Nanobiotechnol. 2021, 19, 166. [Google Scholar] [CrossRef]
  28. Liu, M.; Khan, A.; Wang, Z.F.; Liu, Y.; Yang, G.J.; Deng, Y.; He, N.Y. Aptasensors for pesticide detection. Biosens. Bioelectron. 2019, 130, 174–184. [Google Scholar] [CrossRef]
  29. Liu, Y.; Yang, G.J.; Li, T.T.; Deng, Y.; Chen, Z.; He, N.Y. Selection of a DNA aptamer for the development of fluorescent aptasensor for carbaryl detection. Chin. Chem. Lett. 2021, 32, 1957–1962. [Google Scholar] [CrossRef]
  30. Liu, Y.; Li, T.T.; Yang, G.J.; Deng, Y.; Mou, X.B.; He, N.Y. A simple AuNPs-based colorimetric aptasensor for chlorpyrifos detection. Chin. Chem. Lett. 2022, 33, 1913–1916. [Google Scholar] [CrossRef]
  31. Arduini, F.; Cinti, S.; Scognamiglio, V.; Moscone, D. Nanomaterials in electrochemical biosensors for pesticide detection: Advances and challenges in food analysis. Microchim. Acta 2016, 183, 2063–2083. [Google Scholar] [CrossRef]
  32. Wang, L.; Li, T.; Du, Y.; Chen, C.G.; Li, B.L.; Zhou, M.; Dong, S.J. Au NPs-enhanced surface plasmon resonance for sensitive detection of mercury (II) ions. Biosen. Bioelectron. 2010, 25, 2622–2626. [Google Scholar] [CrossRef] [PubMed]
  33. Liu, Y.; Li, T.T.; Ling, C.X.; Wang, Z.L.; Jin, L.; Zhao, Y.X.; Chen, Z.; Li, S.; Deng, Y.; He, N.Y. A simple visual method for DNA detection based on the formation of gold nanoparticles. Chin. Chem. Lett. 2019, 30, 2359–2362. [Google Scholar] [CrossRef]
  34. Liu, Y.; Deng, Y.; Li, T.T.; Chen, Z.; Chen, H.; Li, S.; Liu, H.N. Aptamer-based electrochemical biosensor for mercury ions detection using AuNPs-modified glass carbon electrode. J. Biomed. Nanotechnol. 2018, 14, 2156–2161. [Google Scholar] [CrossRef] [PubMed]
  35. Yang, G.J.; Huang, H.; Xiao, Z.Q.; Zhang, C.X.; Guo, W.F.; Ma, T.T.; Ma, L.; Chen, Z.; Deng, Y. A novel strategy for liquid exfoliation of ultrathin black phosphorus nanosheets. J. Biomed. Nanotechnol. 2020, 16, 548–552. [Google Scholar] [CrossRef] [PubMed]
  36. Kumar, S.; Vasylieva, N.; Singh, V.; Hammock, B.; Singh, S.G. A facile, sensitive and rapid sensing platform based on CoZnO for detection of fipronil; an environmental toxin. Electroanalysis 2020, 32, 2056–2064. [Google Scholar] [CrossRef] [PubMed]
  37. Liu, G.Y.; Li, S.Y.; Jiang, Z.J.; Li, J.P. A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues. Microchim. Acta 2022, 189, 33. [Google Scholar] [CrossRef]
  38. El-Akaad, S.; Morozov, R.; Golovin, M.; Bol’shakov, O.; Saeger, S.D.; Beloglazova, N. A novel electrochemical sensor for the detection of fipronil and its toxic metabolite fipronil sulfone using TiO2-polytriazine imide submicrostructured composite as an efficient electrocatalyst. Talanta 2022, 238, 123025. [Google Scholar] [CrossRef]
  39. Qin, T.Y.; Zhao, X.F.; Jia, T.H.; Du, X.F.; Lv, T.Y.; Tian, Y.Q.; Zhang, Z.X.; Liu, B.; Xu, H.H.; Zhao, C. A novel protein-based supramolecular recognition approach for ratiometric fluorescence detection of fipronil. Sens. Actuators B-Chem. 2022, 369, 132358. [Google Scholar] [CrossRef]
  40. El-Akaad, S.; Mohamed, M.A.; Elmasri, M.M.; Abdelwahab, N.S.; Abdelaleem, E.A.; Saeger, S.D.; Beloglazova, N. 3D bismuth ferrite microflowers electrochemical sensor for the multiple detection of pesticides. J. Electrochem. Soc. 2020, 167, 027543. [Google Scholar] [CrossRef]
  41. Zhang, J.X.; Feng, T.T.; Zhang, J.Y.; Liang, N.; Zhao, L.S. Fluorescence assay for the sensitive detection offipronil based on an “on–off” oxidized SWCNH/aptamer sensor. Anal. Methods 2021, 13, 3282. [Google Scholar] [CrossRef] [PubMed]
  42. Yin, J.H.; Chen, X.H.; Chen, Z.D. Quenched electrochemiluminescence sensor of ZnO@g-C3N4 modified glassy carbon electrode for fipronil determination. Microchem. J. 2019, 145, 295–300. [Google Scholar] [CrossRef]
  43. Maulidiyah, M.; Azis, T.; Lindayani, L.; Wibowo, D.; Salim, L.O.A.; Aladin, A.; Nurdin, M. Sol-gel TiO2/carbon paste electrode nanocomposites for electrochemical-assisted sensing of fipronil pesticide. J. Electrochem. Sci. Technol. 2019, 10, 394–401. [Google Scholar] [CrossRef] [Green Version]
  44. Yang, S.L.; Lu, J.N.; Zhang, S.J.; Zhang, C.X.; Wang, Q.L. 2D europium coordination polymer as a regenerable fluorescence probe for efficiently detecting fipronil. Analyst 2018, 143, 4901–4906. [Google Scholar] [CrossRef] [PubMed]
Biosensors 12 00775 sch001 550
Scheme 1. Schematic diagrams of experimental setup: the fabrication of Apt/primer/AuNPs/PLL−BP/GCE and its application in electrochemical recognition of fipronil.
Scheme 1. Schematic diagrams of experimental setup: the fabrication of Apt/primer/AuNPs/PLL−BP/GCE and its application in electrochemical recognition of fipronil.
Biosensors 12 00775 sch001
Biosensors 12 00775 g001 550
Figure 1. TEM of (A) BPNSs and (B–D) PLL−BPNSs. The dark-colored background of (B–D) is polylysine.
Figure 1. TEM of (A) BPNSs and (B–D) PLL−BPNSs. The dark-colored background of (B–D) is polylysine.
Biosensors 12 00775 g001
Biosensors 12 00775 g002 550
Figure 2. FTIR diagram of polylysine-coated few-layer black scale nanosheets.
Figure 2. FTIR diagram of polylysine-coated few-layer black scale nanosheets.
Biosensors 12 00775 g002
Biosensors 12 00775 g003 550
Figure 3. CV diagram of polylysine modified GCE electrode with black phosphorus nanosheets, graphene and gold nanoparticles in K3[Fe (CN)6] hybrid system.
Figure 3. CV diagram of polylysine modified GCE electrode with black phosphorus nanosheets, graphene and gold nanoparticles in K3[Fe (CN)6] hybrid system.
Biosensors 12 00775 g003
Biosensors 12 00775 g004 550
Figure 4. Nyquist plots for the electrodes in 10 mM K3Fe (CN)6 solution at open−circuit potential conditions (AC frequency range: 0.1 Hz to 105 Hz; AC amplitude: 5.0 mV).
Figure 4. Nyquist plots for the electrodes in 10 mM K3Fe (CN)6 solution at open−circuit potential conditions (AC frequency range: 0.1 Hz to 105 Hz; AC amplitude: 5.0 mV).
Biosensors 12 00775 g004
Biosensors 12 00775 g005 550
Figure 5. (A) The influence of the amount of AuNPs on the peak value for DPV current of PLL-BP/GCE. (B) Response of DPV to primer incubation. (C) The DPV response change graph of the aptamer incubation time in K3[Fe (CN)6] mixed liquid system. Every point in the graph represents the mean of three successive measurements (n = 3) at each weight or time. (The length of the error bar, also known as the size of the standard deviation, describes how clustered data points are around the mean).
Figure 5. (A) The influence of the amount of AuNPs on the peak value for DPV current of PLL-BP/GCE. (B) Response of DPV to primer incubation. (C) The DPV response change graph of the aptamer incubation time in K3[Fe (CN)6] mixed liquid system. Every point in the graph represents the mean of three successive measurements (n = 3) at each weight or time. (The length of the error bar, also known as the size of the standard deviation, describes how clustered data points are around the mean).
Biosensors 12 00775 g005
Biosensors 12 00775 g006 550
Figure 6. (A) DPV responses of the biosensor to fipronil at the concentration of 0 ng/mL, 0.1 ng/mL, 1 ng/mL, 10 ng/mL, 100 ng/mL, 1 μg/mL, 10 μg/mL in K3[Fe (CN)6] mixed liquid system. (B) The linear relationship between logarithmic value of fipronil concentration and ΔIpeak of DPV. Every point in the graph represents the mean of three successive measurements (n = 3) at each concentration. (The length of the error bar, also known as the size of the standard deviation, describes how clustered data points are around the mean).
Figure 6. (A) DPV responses of the biosensor to fipronil at the concentration of 0 ng/mL, 0.1 ng/mL, 1 ng/mL, 10 ng/mL, 100 ng/mL, 1 μg/mL, 10 μg/mL in K3[Fe (CN)6] mixed liquid system. (B) The linear relationship between logarithmic value of fipronil concentration and ΔIpeak of DPV. Every point in the graph represents the mean of three successive measurements (n = 3) at each concentration. (The length of the error bar, also known as the size of the standard deviation, describes how clustered data points are around the mean).
Biosensors 12 00775 g006
Biosensors 12 00775 g007 550
Figure 7. The effects of interfering substances on the detection of fipronil. ΔIpeak of DPV variation of aptamer sensor at 10 ng/mL As, Ft, Cf, Ac, 10 ng/mL Fp, and mixed group. Mix denotes the solution containing 10 ng/mL of the above interfering pesticide and 10 ng/mL fipronil.
Figure 7. The effects of interfering substances on the detection of fipronil. ΔIpeak of DPV variation of aptamer sensor at 10 ng/mL As, Ft, Cf, Ac, 10 ng/mL Fp, and mixed group. Mix denotes the solution containing 10 ng/mL of the above interfering pesticide and 10 ng/mL fipronil.
Biosensors 12 00775 g007
Table
Table 1. Analytes detected in real samples (n = 3).
Table 1. Analytes detected in real samples (n = 3).
SampleAdded (ng/mL)Found (ng/mL)Recovery (%)RSD (%)
River water1010.79107.9%0.61%
100100.69100.69%8.23%
10,000841084.1%5.58%
Table
Table 2. Comparison of the analytical performance with other methods.
Table 2. Comparison of the analytical performance with other methods.
MethodsSampleLinear Range (nM)LOD (nM)References
GCE/CoZnONF/Anti-fipronil_100 ag/mL–100 μg/mL, 0.23 fM–0.23 mM112 ag/mL, 0.25 fM[36]
Molecularly imprinted
electrochemiluminescence sensor		Egg, Banana, Oilseed rape, Orange10 fM–1 nM0.78 fM[37]
A screen-printed electrode (SPE)Eggs, Water0.01 to 10 μM8.42 nM[38]
Fluorescence detectionArabidopsis thaliana0–500 μM22 nM[39]
BiFeO3/CPEEnvironmental water1.0–100.0 μM0.81 μM[40]
Aptamer-based Fluorescence assayCorn, Honey, Tap water10–100 nM3 nM[41]
Electrochemiluminscence (ECL) sensorEggs5–1000 nM1.5 nM[42]
Electrochemical sensorFipronil pesticide-34 nM[43]
Fluorescent-based probeEggs1 μM–0.1 mM0.8 M[44]
PLL-BP-Apt sensorLake water0.1 ng/mL–10 μg/mL, 0.23 nM–0.23 μM74 pg/mL,
0.17 nM		This work
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Huang, H.; Zhang, C.; Zhou, J.; Wei, D.; Ma, T.; Guo, W.; Liu, X.; Li, S.; Deng, Y. Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets. Biosensors 2022, 12, 775. https://doi.org/10.3390/bios12100775

AMA Style

Huang H, Zhang C, Zhou J, Wei D, Ma T, Guo W, Liu X, Li S, Deng Y. Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets. Biosensors. 2022; 12(10):775. https://doi.org/10.3390/bios12100775

Chicago/Turabian Style

Huang, Hao, Chuanxiang Zhang, Jie Zhou, Dan Wei, Tingting Ma, Wenfei Guo, Xueying Liu, Song Li, and Yan Deng. 2022. "Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets" Biosensors 12, no. 10: 775. https://doi.org/10.3390/bios12100775

APA Style

Huang, H., Zhang, C., Zhou, J., Wei, D., Ma, T., Guo, W., Liu, X., Li, S., & Deng, Y. (2022). Label-Free Aptasensor for Detection of Fipronil Based on Black Phosphorus Nanosheets. Biosensors, 12(10), 775. https://doi.org/10.3390/bios12100775

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop