Next Article in Journal
Computation of Vascular Parameters: Implementing Methodology and Performance Analysis
Previous Article in Journal
Investigation of the Impact of Hydrogen Bonding Degree in Long Single-Stranded DNA (ssDNA) Generated with Dual Rolling Circle Amplification (RCA) on the Preparation and Performance of DNA Hydrogels
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Musa et al. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491

1
Institute of Bio-Sensing Technology (IBST), University of the West of England, Bristol BS16 1QY, UK
2
Centre for Research in Biosciences (CRIB), School of Applied Sciences, University of the West of England, Bristol BS16 1QY, UK
*
Author to whom correspondence should be addressed.
Biosensors 2023, 13(7), 756; https://doi.org/10.3390/bios13070756
Submission received: 28 June 2023 / Accepted: 30 June 2023 / Published: 24 July 2023
(This article belongs to the Section Biosensor and Bioelectronic Devices)

Error in Figure 8A

In the original publication [1], there is a mistake in Figure 8A as published. Figure 8A had an incorrect data range on the x-axis. The authors confirmed the mistake in Figure 8A’s x-axis, and a new Figure 8A, with a correct data range of 0.00 to 0.8V is now submitted. The corrected Figure 8A appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Biosensors 13 00756 i008

Reference

  1. Musa, A.M.; Kiely, J.; Luxton, R.; Honeychurch, K.C. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Musa, A.M.; Kiely, J.; Luxton, R.; Honeychurch, K.C. Correction: Musa et al. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491. Biosensors 2023, 13, 756. https://doi.org/10.3390/bios13070756

AMA Style

Musa AM, Kiely J, Luxton R, Honeychurch KC. Correction: Musa et al. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491. Biosensors. 2023; 13(7):756. https://doi.org/10.3390/bios13070756

Chicago/Turabian Style

Musa, Auwal M., Janice Kiely, Richard Luxton, and Kevin C. Honeychurch. 2023. "Correction: Musa et al. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491" Biosensors 13, no. 7: 756. https://doi.org/10.3390/bios13070756

APA Style

Musa, A. M., Kiely, J., Luxton, R., & Honeychurch, K. C. (2023). Correction: Musa et al. An Electrochemical Screen-Printed Sensor Based on Gold-Nanoparticle-Decorated Reduced Graphene Oxide–Carbon Nanotubes Composites for the Determination of 17-β Estradiol. Biosensors 2023, 13, 491. Biosensors, 13(7), 756. https://doi.org/10.3390/bios13070756

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop