Next Article in Journal
E3 Ubiquitin Ligase ASB17 Promotes Apoptosis by Ubiquitylating and Degrading BCLW and MCL1
Previous Article in Journal
Genome-Wide Identification and Characterization of Long Noncoding RNAs Involved in Chinese Wheat Mosaic Virus Infection of Nicotiana benthamiana
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant

1
Botany and Microbiology Department, Faculty of Science, Al-Azhar University, Nasr City, Cairo 11884, Egypt
2
Agriculture Research Centre, Plant Protection Research Institute, Dokki, Giza 12619, Egypt
3
Department of Biology, College of Science, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia
*
Author to whom correspondence should be addressed.
Biology 2021, 10(3), 233; https://doi.org/10.3390/biology10030233
Submission received: 23 February 2021 / Revised: 12 March 2021 / Accepted: 15 March 2021 / Published: 17 March 2021
(This article belongs to the Section Biotechnology)

Abstract

:

Simple Summary

In the current study, copper oxide nanoparticles (CuO-NPs) were successfully formed through the reduction of CuSO4·5H2O by the activity of Aspergillus niger strain (G3-1) metabolites. The as-formed CuO-NPs were characterized by UV–visible (UV–vis) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy–energy dispersive spectroscopy (SEM-EDX), Fourier-transform infra-red (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Data showed the efficacy of fungal metabolites to fabricate crystallographic, spherical CuO-NPs with sizes of 14.0 to 47.4 nm at varied bending energies. The biosynthesized CuO-NPs exhibited activity against two wheat grain insects, Sitophilus granarius and Rhyzopertha dominica, in a size- and dose-dependent manner. Moreover, the lower CuO-NP concentrations had beneficial effects on the morphological and physiological aspects of wheat plants, without displaying any toxicity or repression of growth.

Abstract

Herein, CuO-NPs were fabricated by harnessing metabolites of Aspergillus niger strain (G3-1) and characterized using UV–vis spectroscopy, XRD, TEM, SEM-EDX, FT-IR, and XPS. Spherical, crystallographic CuO-NPs were synthesized in sizes ranging from 14.0 to 47.4 nm, as indicated by TEM and XRD. EDX and XPS confirmed the presence of Cu and O with weight percentages of 62.96% and 22.93%, respectively, at varied bending energies. FT-IR spectra identified functional groups of metabolites that could act as reducing, capping, and stabilizing agents to the CuO-NPs. The insecticidal activity of CuO-NPs against wheat grain insects Sitophilus granarius and Rhyzopertha dominica was dose- and time-dependent. The mortality percentages due to NP treatment were 55–94.4% (S. granarius) and 70–90% (R. dominica). A botanical experiment was done in a randomized block design. Low CuO-NP concentration (50 ppm) caused significant increases in growth characteristics (shoot and root length, fresh and dry weight of shoot and root, and leaves number), photosynthetic pigments (total chlorophylls and carotenoids), and antioxidant enzymes of wheat plants. There was no significant change in carbohydrate or protein content. The use of CuO-NPs is a promising tool to control grain insects and enhance wheat growth performance.

1. Introduction

Nanotechnology is an interdisciplinary science, growing rapidly due to its incorporation into various scientific sectors, such as medicine, engineering, pharmacy, industry, wastewater treatment, paper preservation, and agriculture [1,2,3]. Nanoparticles (NPs) are aggregates of atoms or molecules at a nano-size, ranging from 1 to 100 nm [4]. Nanomaterials have unique physical and chemical properties that differ from their bulk forms [5]. These properties include a larger surface to volume ratio in comparison with bulk materials, size, shape, crystal structure, thermal stability, charge, and zeta potential [6,7]. NPs are synthesized using various approaches, including chemical, physical, and biological methods. Biological synthesis is preferred over chemical and physical methods [8]. The harnessing of metabolites generated from different biological entities, including prokaryotic and eukaryotic organisms (e.g., bacteria, actinomycetes, fungi, yeast, and plants), to fabricate metals and their oxide NPs has recently begun to generate more interest [8]. This may be attributed to the advantages that these methods offer, such as biocompatibility, safe and easy handling, large-scale production potential, rapid development, the avoidance of hazard by-products, and being environmentally friendly.
Copper oxide nanoparticles (CuO-NPs) are highly interactive nanomaterials that display various biological activities, such as antibacterial and antifungal activity, antioxidant properties, drug delivery, and cytotoxic efficacy against tumor and cancer cells [9,10]. CuO-NPs have been fabricated either extra- or intracellularly through different biological entities, such as bacterial, fungal, actinomycetes, algae, and plants. The harnessing of fungal species as reducing, capping, and stabilizing agents to fabricate NPs is most interesting, because of various secreted metabolites, high metal accumulation, and scalability [11].
Wheat (Triticum aestivum L.) crop belongs to the family Graminae (Poaceae) and is an annual, large shrub plant commonly used as food. It is the most valuable food and strategic cereal crop in Egypt and ranks third globally, after corn and rice, as the most productive grain [12]. Wheat can grow under different environmental conditions, and this allows for extensive cultivation as well as long-term food storage. In general, around 70% of wheat crops are used for human nutrition, 19% for animal feed, and the remaining 11% for industrial applications, including in biofuels [13].
Pest infestation of wheat crops can start in the field and continue through storage until the grains are processed for consumption. Stored grain pests cause high economic losses by feeding on stored grains, and they harm public health by contaminating food. Sitophylus granarius and Rhyzopertha dominica are major stored wheat pests worldwide that cause the most quantitative and qualitative losses [14]. Immature insects can develop inside the grain. The larvae and adults can feed on grain kernels and leave behind dust; thin brown shells or a musty odor are often associated with the infestations of these insects [15]. Since residues from synthetic insecticides are a potential hazard for mammals, and insect resistance to synthetic insecticides is an ongoing challenge [16], there is a need to search for a new, readily available, affordable substance that can act as an insecticide while being less toxic to mammals and less detrimental to the environment.
Copper (Cu) is a vital element when combined with specific proteins and enzymes that have essential functions in the growth and nutrition of plants [17]. It is involved in cell wall metabolism, mitochondrial respiration, photosynthetic electron transport, oxidative stress responses, and hormone signaling [18]. Copper can also cause enhanced production of bioactive compounds, reactive oxygen species (ROS) plant growth inhibition, and altered root systems [19,20,21].
This study aimed to synthesize CuO-NPs using an eco-friendly approach by using metabolites present in biomass filtrate of Aspergillus niger. Characterizations were performed with UV–vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), SEM-EDX, FT-IR, and X-ray photoelectron spectroscopy (XPS). The efficacy of green-synthesized CuO-NPs as insecticides against wheat grain insects Sitophylus granarius and Rhyzopertha dominica was evaluated. The treatment of wheat plants (Triticum aestivum L.) with biosynthesized CuO-NPs and their resultant growth performance was also investigated.

2. Materials and Methods

2.1. The Fungal Strain Used for Biosynthesis of CuO-NPs

Aspergillus niger strain G3-1 was isolated from desert soil samples from El-Wahat, Giza, Egypt (GPS N: 2°21′38″ E: 28°55′56.3″) and cultivated on potato dextrose (PD) agar media. The fungal strain was subjected to cultural, morphological, and molecular identification based on internal transcribed spacer (ITS) sequencing analysis, as previously described by Fouda et al. [22]. The gene sequence obtained from molecular identification was placed in the gene bank with accession number ky465752.

2.2. Biosynthesis of CuO-NPs

A three-disk (0.7 mm in diameter) sample of old culture A. niger strain G3-1 was inoculated onto 100 mL of PD broth media and incubated for 6 days at 28 °C ± 2 °C and under 150-rpm shaking conditions. At the end of the incubation period, the cultivated medium was subjected to centrifugation to separate fungal biomass, which was washed three times with distilled water to remove any medial components. Next, the washed fungal biomass (15 g) was mixed with 100 mL distilled water for 48 h, then centrifuged to collect biomass filtrate (i.e., supernatant without any fungal biomass), which was used later to fabricate CuO-NPs as follows: 2 mM of the metal precursor CuSO4·5H2O was mixed with 100 mL biomass filtrate for 24 h at 30 °C ± 2 °C and under 150-rpm shaking conditions. The resultant greenish dark NPs were collected and oven-dried at 200 °C for 24 h.

2.3. Characterization of Fungal-Mediated CuO-NPs

2.3.1. UV–Vis Spectroscopy Analysis

The resultant greenish color, which formed due to CuO-NP biosynthesis, was monitored by UV–vis spectroscopic analysis (Jenway 6305 Spectrophotometer) at wavelength 200–800 nm, to detect surface plasmon resonance (SPR).

2.3.2. X-ray Diffraction (XRD) Analysis

The crystallinity of the fungal-mediated CuO-NPs was analyzed using XRD patterns with the X-ray diffractometer X’Pert Pro (Philips, Eindhoven, Netherlands). The 2θ was in the range of 4 °C–70 °C. Ni-filtered Cu Ka radiation was used as the X-ray source, while the voltage and current were 40 kV and 30 mA, respectively [23].

2.3.3. Transmission Electron Microscopy (TEM) Analysis

The formed size and specific shape of the fungal-mediated CuO-NPs were examined using TEM (JEOL 1010 Japan) with an accelerating voltage of 200 KV, magnification mode of 600× to 500,000×, and tilt angles of X-tilt +/−60°. For this purpose, a drop of NP solution was loaded on a carbon-coated copper grid. The excess NP solution was removed by placing the grid on blotting paper. Afterward, the grid was left to dry before being placed on a specimen holder [24,25].

2.3.4. Energy-Dispersive Spectroscopic Analysis (SEM-EDX)

The quantitative elemental composition of the fungal-mediated CuO-NPs was explored using Quanta 250FEG (Thermo Fisher Scientific, Waltham, MA. USA) (accelerating voltage: 20.00 kV; magnification mode: 3000×; with detector BSED). The Quanta FEG is integrated with an energy dispersive spectroscopy (EDX) detector (FEI company subsidiary of Thermo Fischer Scientific, Inc., Backscattered electron (BSE) detector; high electron beam at 2.5 nm at 30 KV) [26].

2.3.5. Fourier-Transform Infrared (FT-IR) Spectroscopy

FT-IR analysis (Agilent system Cary630 FT-IR model) was used for the biomass filtrate of the fungal strain and the biosynthesized CuO-NPs, to detect the various functional groups accountable for reducing, capping, and stabilizing the NPs. The transmittance mode spectra were measured over a range of 4000–400 cm−1, with 12 scans.

2.3.6. X-ray Photoelectron Spectroscopy (XPS) Analysis

XPS spectra were analyzed using an ESCALAB 250XI+ instrument (Thermo Fischer Scientific, Inc., Waltham, MA, USA) connected with a monochromatic X-ray with Al Kα radiation (1486.6 eV). The analysis was conducted under the following conditions: spot size was set to 500 µm, samples were prepared under pressure adjusted to 10−8 mbar, the energy was calibrated with the Ag3d5/2 signal (∆BE: 0.45 eV) and the C 1s signal (∆BE: 0.82 eV), and the full- and narrow-spectrum pass energy were 50 eV and 20 eV, respectively [27].

2.4. Insecticidal Bioassay

The insects Sitophilus granarius (adult wheat weevil) and Rhyzopertha dominica (small grains borer) were reared for several generations without exposure to any insecticide on their food (wheat grains). The experiment and insect rear were performed in the laboratory of the Department of Stored Products and Grains Pests, Plant Protection Research Institute, Agriculture Research Centre, Dokki, Giza, Egypt. One hundred insects were placed in a 500-mL jar containing 200 g wheat grains. After one week, the adults were removed, and the jar was left unchanged until the next generation emerged. To start the experiment, the jar was covered with gauze and tightly closed with a rubber band. The wheat grains were sterilized at 55 °C for 6 h, to eliminate any hidden infestation. Five different concentrations (100, 150, 200, 250, and 300 mg) of CuO-NPs were mixed with 100 g of wheat grains. Twenty adults of each species were placed separately in each replicate, and three replicates were used for each treatment. Mortality rates were calculated after 2.0, 4.0, 6.0, 8.0, and 10.0 days; then, all treatments were left until the first (f1) progeny emerged.
The reduction percentages in the progeny offspring were calculated using the following equation [28]:
Reduction   percentages   ( % )   arcsin   θ = No . of   progeny   of   contol No . of   progeny   of   treated No . of   progeny   of   control

2.5. Effect of Biosynthesized CuO-NPs on Wheat Plant Growth Performance

2.5.1. Field Experiment Design

A field experiment was carried out during the winter of 2019/2020 to evaluate the impact of biologically-synthesized CuO-NPs on the growth and metabolism of wheat (Triticum aestivum L.) plants. The experiment took place in the botanical garden of the Botany and Microbiology Department, Faculty of Science, Al-Azhar University, Cairo, Egypt. Wheat grains (cv. Masr 1) were obtained from the Agriculture Research Center, Ministry of Agriculture, Giza, Egypt. Uniform grains were cultivated in 5 ridges. The first ridge represented the control plants. The second-ridge plants were foliar-sprayed with 50 ppm CuO-NPs, while the third-ridge plants were foliar-sprayed with 100 ppm CuO-NPs. The fourth ridge contained plants whose seeds were soaked in 50 ppm CuO-NPs before sowing. The fifth ridge had plants whose seeds were soaked in 100 ppm CuO-NPs before sowing. The plants were irrigated whenever required. The physicochemical characteristics of the soil used in the field experiments were classified as sandy soil, containing sand (94.26%), silt (4.35%), and clay (1.39%). The plant samples were collected at the vegetative stage after 6 weeks of sowing for analysis.

2.5.2. Morphological Measurements

Five plants were randomly collected from each treatment to estimate root length, shoot length, number of leaves, root fresh weight, root dry weight, shoot fresh weight, and shoot dry weight.

2.5.3. Physiological Measurements

Leaf pigments (chlorophylls and carotenoids) in the fresh leaves were assessed according to [29]. Briefly, one gram of fresh leaves was extracted using 100 mL of 80% acetone (v/v). The homogenate was filtered, and then the filtrate was diluted to a total volume of 100 mL using 80% acetone. The absorbance of the extract was measured in three replicates at 665, 649, and 470 nm using a spectrophotometer (Jenway 6305 Spectrophotometer).
The contents of the total soluble carbohydrates were estimated using the anthrone technique according to [30]. Briefly, 1 g of dried plant tissue was extracted with 5 mL of 2% phenol and 10 mL 30% trichloroacetic acid. The mixture was shaken and kept overnight before being filtered. Each sample filtrate was filtered with charcoal. The clear filtrate was diluted quantitatively with distilled water. Next, 2 mL of diluted filtrate was mixed with 4 mL of freshly prepared anthrone reagent (2 g anthrone/L of 95% pure sulfuric acid). The developed color was measured using a spectrophotometer at 620 nm. The experiment was performed in triplicate.
The method described by [31] was used to assay the contents of soluble proteins. Briefly, 1 g of the dried sample was extracted in 5 mL of 2% phenol and 10 mL distilled water. The mixture was shaken and kept overnight before being filtered. Each sample was filtered using charcoal. The reagents used were solution A (2% Na2CO3 in 0.1 N NaOH), solution B (0.5 g CuSO4 in 1% sodium potassium tartrate), solution C (50 mL of solution A were mixed with 1 mL of solution B), and solution D (diluting Folin reagent with distilled water in the proportion of 1:3). In a test tube, 1 mL of the clear filtrate of the plant sample was added to 5 mL of solution (C). The contents of the tube were mixed and left to stand for 10 min. Next, 0.5 mL of solution (D) was rapidly added and mixed with the tube contents, then left to stand for an additional 30 min. The optical density of the resultant color was read at the wavelength of 750 nm. The experiment was performed in triplicate.
Antioxidant enzyme superoxide dismutase (EC1.15.1.1) activity was determined by measuring the repression of pyrogallol auto-oxidation as described in [32]. The solution (10 mL) consisted of 3.6 mL of distilled water, 0.1 mL of enzyme, 5.5 mL of 50 mM phosphate buffer (pH 7.8), and 0.8 mL of 3 mM pyrogallol (dissolved in 10 mM HCl). The rate of pyrogallol reduction was measured at 325 nm with a UV spectrophotometer.
To estimate the activity of peroxidase (EC1.11.1.7), the method outlined by [33] was used as follows: 5.8 mL of 50 mM phosphate buffer (pH 7.0) was mixed with 0.2 mL of the enzyme extract and 2 mL of 20 mM H2O2, followed by adding 2 mL of 20 mM pyrogallol. The rate of increase in absorbance of pyrogallol was determined using a UV–vis spectrophotometer within 60 s at 470 nm.
The method provided by [34] was used to estimate the activity of ascorbate peroxidase (EC1.11.1.11) as follows: 0.5 mM ASA, 0.8 mL of potassium phosphate buffer (50 mM, pH 7), 0.1 mM H2O2, and 0.2 mL enzyme extract were mixed. The changes in absorbance were read at 290 nm.

2.6. Statistical Analysis

Data were statistically analyzed using SPSS v17 (SPSS Inc., Chicago, IL, USA). One-way analysis of variance (ANOVA) was used to investigate the efficacy of CuO-NPs on wheat growth performance. A posteriori multiple comparisons were done using Tukey’s range tests at p < 0.05. All results are the means of three to six independent replicates, as specified above.

3. Result and Discussion.

3.1. Aspergillus Niger-Mediated Biosynthesis of CuO-NPs

In this study, the metabolites of fungal isolate Aspergillus niger G3-1 were a catalyst to the formation of CuO-NPs. Once the fungal biomass was mixed with CuSO4·5H2O, its color was changed from colorless to greenish-brown. These color changes were due to the reduction of Cu+2 to nanoscale CuO via enzymes and proteins in the fungal biomass [35,36]. The bioreduction processes were dependent on the number of metabolites present in the biomass filtrate, which enhance the production process, decrease the aggregation, and produce a smaller size [37,38].

3.2. Characterization of CuO-NPs

3.2.1. UV–Vis Spectroscopy Analysis

A. niger-mediated biosynthesis of CuO-NPs was confirmed by UV–vis spectroscopic analysis, which showed two peaks. The first peak was related to cuprous oxide (Cu2O) at 245 nm, and the second was for cupric oxide (CuO) at 360 nm (Figure 1A). Data in this study are compatible with Rabiee et al. [39], who reported that the UV–vis spectra of CuO-NPs synthesized by Achillea millefolium leaf extract also had two peaks, with one at 250 nm for cuprous oxide and one at 365 nm for cupric oxide. In contrast, Yin et al. [40] showed that the UV–vis spectrum of CuO nanocrystals has three absorption peaks at 260 nm, 340 nm, and 630 nm. He reported that the observed peaks at 260 nm and 340 nm were due to the band-to-band transition of Cu2O nanocrystalline, while the peak at 630 nm was attributed to the bandgap transition of CuO. Moreover, the UV–vis spectrum of CuO-NPs fabricated by aqueous extract of brown algae Bifurcaria bifurcata showed two absorption bands at 260 nm and 650 nm, corresponding to the formation of Cu2O and CuO, respectively [41]. The results of the current study indicate the successful formation of Cu2O and CuO in the colloidal NP solution, which conforms with the various published studies [39,42], and this finding was confirmed by XPS analysis. These characteristic patterns of as-formed CuO-NPs were due to the efficacy of water-soluble metabolites present in the biomass filtrate to reduce copper ions [41]. The broadest peaks in UV–vis spectra could be due to the broad size distribution of CuO-NPs [39]. The color change was correlated with the surface plasmon resonance (SPR) of formed NPs, which confirms the efficacy of metabolites involved in A. niger biomass to reduce metal Cu+2 to the nanoscale [43,44].

3.2.2. XRD Analysis

XRD patterns are crucial tools for the confirmation of the crystalline nature of green-synthesized CuO-NPs. As seen in Figure 1B, XRD-based CuO-NP characterization exhibited eight peaks at 2θ values: 32.9°, 35.8°, 39.2°, 58.6°, 61.9°, 66.5°, 68.4°, and 72.8°. These were assigned to planes (110), (−111), (111), (−202), (202), (113), (311), and (221), respectively. The visualized XRD peaks were matched with JCPDS number 01-080-0076 for crystallographic CuO-NPs [36]. Gopinath et al. [45] reported the successful fabrication of the crystalline, monoclinic phase of CuO-NPs at the same XRD planes using Tribulus terrestris aqueous fruit extract, which is consistent with our study. The average size of crystalline CuO particles can be calculated using the Debye–Scherrer equation [46]:
D = 0.94 λ / β cos θ
where D is the average particle size; 0.94 is the Scherrer’s constant; λ is the X-ray wavelength; β and θ are the full widths at half maximum XRD line and half diffraction angle, respectively. In this study, the average CuO-NP size obtained from XRD analysis ranged between 3.0 and 14.1 nm. The presence of other peaks in the XRD pattern was due to impurities that could be attributed to the precipitation of metabolites in the biomass filtrate that acted as capping agents [47].

3.2.3. TEM, SEM-EDX Analyses

The biosynthesized CuO-NPs were characterized with TEM and SEM-EDX analysis to investigate their shape and size and to perform quantitative elemental analysis of NPs. Figure 2 shows the successful fabrication of spherical CuO-NPs by harnessing metabolites involved in the biomass filtrate of A. niger G3-1, with the average size ranging between 14.0 and 47.37 nm. According to XRD and TEM analysis, the size of biosynthesized CuO-NPs did not exceed 50 nm, which is considered a small size. This phenomenon could be useful for biotechnological and biomedical applications in which NP size needs to be consistently small. As NP size decreases, their potential application increases [26,43,48]. The obtained results are compatible with Manjari et al. [49], who successfully synthesized spherical CuO-NPs of 36–54 nm using the flower extract of Aglaia elaegnoidea. Recently, the metabolites secreted by fungal strain Aspergillus terreus AF-1 were utilized as a reducing and capping agent to synthesize spherical CuO-NPs with a size range of 11–47 nm [50].
In this study, the CuO-NP size obtained by TEM analysis was larger than that obtained by XRD. Each particle contains an amorphous and a crystal domain, and while TEM analysis results in the sum of these two domains as particle size, XRD only gives results for the crystal domain. Moreover, XRD measures the core of coated NPs, but not the surface coating, while TEM analysis measures overall NP size [51].
The qualitative and quantitative analyses of biosynthesized CuO-NPs were achieved using SEM-EDX to detect elemental compositions of the sample with relative percentages, such as weight and atomic % (Figure 2B,C). Notably, the highest EDX peaks reflected element concentrations. The EDX spectra contained mainly the elements Cu and O, with weight percentages of 62.96% and 22.93%, respectively. The presence of S may have been due to the conjugation of CuO-NPs with fungal biomolecules found in the biomass filtrate, such as amino acids (cysteine or methionine) and phospholipids [52]. In line with this, Hassan et al. [47] reported that the main EDX spectra peaks for CuO-NPs synthesized by endophytic actinomycetes were Cu and O, with the presence of other minor peaks related to biomolecules in the actinobacterial filtrate, which conjugated with CuO-NPs.

3.2.4. FT-IR Analysis

The functional groups responsible for reducing and stabilizing CuO-NPs, as well as those found in NPs, were characterized using FT-IR analysis. As seen in Figure 3, fungal biomass filtrate had varied peaks at 659, 1630, 2302, and 3331 cm−1. The broad absorption peaks at 3331 and 1630 cm−1 corresponded to N-H vibration bending amine and stretching C=C conjugated alkene, respectively [47]. A strong broad peak at 659 cm−1 referred to the C=C bending of alkene, while the peak at 2302 cm−1 corresponded to the stretching of the S-H thiol group in proteins [53]; meanwhile, IR of the biogenic CuO-NPs showed different peaks at 3595 cm−1 (O-H stretching, alcohol), 3378 cm−1, and 3305 cm−1 (N-H stretching, aliphatic primary amines, and O-H broad stretching alcohol, respectively) [54,55]. Other IR CuO-NPs peaks appeared at 2925 cm−1 (C-H stretching, medium, alkane), 2030 cm−1 (C=C=C, stretching, medium, allene), 1635 cm−1 (C=C, medium, alkene), 1087 cm−1 (strong C-O stretching, secondary alcohol), 1035 cm−1 (medium C-N, amine), and 871 cm−1 (strong C-H bending) [56,57]. Interestingly, the IR peaks at 477 and 596 cm−1 corresponded to the formation of metal oxide (Cu-O) [47,58]. The presence of functional groups in the biomass filtrate displayed by the FT-IR spectra could be responsible for reducing, capping, and stabilizing the biogenic CuO-NPs.

3.2.5. X-ray Photoelectron Spectroscopy (XPS)

XPS survey of the green-synthesized CuO-NPs is given in Figure 4. The presence of copper is confirmed by Cu 3p3, Cu 3s, Cu LM1, Cu LM2, Cu LM3, Cu 2p1, and Cu 2p2. Besides Cu, other peaks for different elements related to biomolecules in the biomass filtrate were investigated, including O (2s, 1s KL1, and KL2), carbon (as C1s and CKL1), Na (as Na 2s and Na KL1), and S (as S2p and S 2s). C1 was split into four individual peaks, which were identified as C(H, C) at 284.25 eV; C(S, NH, NH2) [59] at 285.25 eV; C(-O, =N) [60] at 286.15 eV; and C(-O-C, ≡N) [61] at 287.7 eV. O1s was deconvoluted into five peaks at 531.23 eV for O(Cu(II), C, H) [62,63,64]; 532.6 eV for O-(N); 535.75 eV for C-O-C; 529.25 eV for O-Cu(I); and 534.1 eV for Na KL1, which indicated the presence of Cu as +1 and +2 oxides. There were three individual peaks for N 1s at 399.42 eV, 398.5 eV, and 401.15 eV for N(C, =C, H), N≡C, and Ntert, respectively [65,66,67], which indicated that it was present as amine (i.e., 1°, 2°, and 3° amines). Cu2p was deconvoluted into six peaks at 934.58 eV and 936.9 eV for Cu(II) 2p3/2; 932.55 eV for Cu(I) 2p3/2; 937.95 eV, 938.6 eV, 939.15 eV, 940.7 eV, and 943.35 eV for Cu (II) Satellite; 950.2 eV, 951.25 eV, and 952.2 eV for Cu(I)2p1/2; 954.45 eV for Cu(II)2p1/2; and 959.4 eV, and 962.35 eV for Cu (II) satellite, which indicated the presence of Cu as (I and II) oxides.

3.3. The Assessment of Green-Synthesized CuO-NPs as an Insecticide

Insects are one of the main causes of damage to stored grains. In the past, control of these insects has been accomplished using various chemical compounds, which have negative impacts on grain and users in the long term [68]. Natural plant extractions, such as essential oils, can be used as alternatives to chemical insecticides [69]. Green insecticides are ecofriendly, safe, biocompatible, and easy to apply [70], particularly green insecticides made of metal and metal oxide NPs. In this study, the potentiality of as-formed CuO-NPs as an insecticide was investigated against two wheat grain insects.
Our data analysis showed the potential that CuO-NPs have as an insecticidal agent against S. granarius at different concentrations (Table 1). As CuO-NP concentration and exposure time increased, the mortality rate was also increased. The mortality percentages ranged from 55% to 94.4% at CuO-NP concentrations from 100 to 300 mg/100 g of wheat grains after 10 days. At these concentrations, there was a 65–80% reduction in the F1 generation.
Data represented in Table 2 display the effect of CuO-NPs as an insecticidal agent against R. dominica at different concentrations. Data analysis revealed that the mortality rates were in the range of 70% to 90% at NP concentrations 100 to 300 mg/100 g wheat after exposure time 10 days. At these concentrations, there was a 33–100% reduction in the F1 generation, which ranged from 33% to 100%.
It can be concluded from our results that biosynthesized CuO-NPs can be used as insecticides against stored grain insects, as the mortality of adults of both species was observed at all concentrations. These results coincide with El-Saadony et al. [71], who concluded that biosynthesized Cu-NPs were toxic against the stored grain pest Tribolium castaneum, with an LC50 value of 37 ppm after 5 days of treatment. A negligible effect was observed with the chemical synthesis of Cu-NPs at the same concentration. Malaikozhundan et al. [72] stated that the biopesticide effect of Bt-ZnO-NPs was tested against the pulse beetle (Callosobruchus maculatus). Treatment with Bt-ZnO-NPs reduced the fecundity (eggs laid) and hatchability of C. maculatus in a dose-dependent manner. Thus, Bt-ZnO-NPs were highly effective in the control of C. maculatus since they caused 100% mortality at 25 μg·mL−1.
It can also be concluded that the biological production of NPs could be considered an ecofriendly approach due to its avoidance of hazardous chemicals and harsh conditions used during chemical and physical fabrications. This conclusion is supported by Selvan et al. [73] and Gunalan et al. [74], who demonstrated that both biogenic and green synthesis of Cu-NPs was ecofriendly and inexpensive. Green manufacturing of CuO-NPs is a safe, cost-effective, and ecofriendly process against the most critical economic insects, such as Tribolium castaneum, which causes significant losses in crops that enter human and animal food chains [71]. The mechanism of mortality may be the entry of the NPs into the insect’s cuticle, which blocks skin pores’ respiratory openings and leads to suffocation and death. The toxic effect may also be the result of the particles entering the insect’s blood, which leads to poisoning and the loss of appetite. This phenomenon is consistent with Yamanaka et al. [75], who stated that toxicity may be attributed to the ability of NPs to pass through epithelial and endothelial cells via transcytosis. Furthermore, NPs can proceed easily along the dendrites, axons, blood, and lymphatic vessels, causing oxidative stress and other effects [76].

3.4. The Efficacy of Green-Synthesized CuO-NPs on Wheat Growth Behaviors

3.4.1. Morphological Measurements

The impact of soaking and foliar spray with biologically synthesized CuO-NPs on the morphological attributes of wheat plants was illustrated in Table 3. The application of 50 ppm and 100 ppm CuO-NPs (via foliar or soaking method) increased the growth indices (lengths, fresh weights and dry weights of roots and shoots, and the number of leaves) of wheat plants compared to the control. Data analysis showed that the root length of wheat plants treated with 50 and 100 ppm CuO-NPs via the foliar spray method (13.16 ± 0.57 and 12.94 ± 0.58 cm, respectively) was higher than plants treated with soaking methods at the same concentrations (10.6 ± 0.48 and 9.82 ± 0.63 cm). In the same regard, the foliar spray method was better than the soaking method in root fresh and dry weights and in shoot dry weight. In general, lower concentrations of CuO-NPs were markedly better than higher concentrations for both methods. The toxicity of high CuO-NP concentrations in plants has been recorded previously by [77,78]. Moreover, Rajput et al. [79] reported that the germination of Hordeum sativum L., as well as the shoot and root length, were decreased with increased doses of Cu bulk and CuO-NPs. Furthermore, they found that the high concentrations of Cu bulk and CuO-NPs have destructive effects on the cellular structure of Hordeum sativum L. and concluded that the CuO-NPs are better than the Cu bulk structure and a low concentration is preferred over a high concentration for plant treatment [79]. This finding increases the strength of our study of the use of low CuO-NP concentrations. The toxicity of high concentrations could be attributed to the liberation of Cu ions from CuO-NPs in aqueous solutions, which is a toxicity factor in plants [80]. Several studies have reported an increase in plant growth criteria in response to the application of CuO-NPs at small concentrations [81,82,83,84]. Additionally, Yasmeen et al. [85] have reported that the growth of wheat (Triticum aestivum) plants were increased when plants were soaked with Cu-NPs. Zuverza-Mena et al. [86] found that fresh and dry weights of cilantro (Coriandrum sativum) plants were increased when the plants were grown in soil amended with CuO-NPs at 80 mg/kg. Hafeez et al. [87] observed that soils amended with copper NPs at concentrations from 10 to 30 ppm significantly increased the growth of wheat. In another study, the root and shoot length of the eggplant seedlings was increased as compared to control plants due to treatment with a lower CuO-NP concentration (100 mg/L) [88]. The increased length of the seedlings at these concentrations indicates the growth-promoting ability of CuO-NPs at lower concentrations [88]. These positive results were probably due to copper’s role as an essential micronutrient for plant growth.

3.4.2. Leaf Pigments

Leaf pigments were also observed (Figure 5A,B). The results showed significant increases in the total chlorophylls and carotenoids in response to all treatments of CuO-NPs. At 50 ppm, the highest significant increases in total chlorophylls (23% and 10.5%) and carotenoids (20.2% and 12.3%) were observed. In a recent study by [83], lower concentrations of CuO-NPs showed increased leaf pigments (chlorophylls and carotenoids) in tomato plants (Lycioersicum esculentum). Moreover, lower concentrations of CuO-NPs stimulated photosynthesis up to 14%, as compared with the control level of tomato plants [82]. This increase in photosynthesis rate might be due to the increased biological and chemical activities of metals at the nanoscale and the correlative impact of nutrients (magnesium, iron, zinc, sulfur, etc.) on plants. Young [89] indicated that the promotion of carotenoids plays a significant role in scavenging ROS and protects the plant from the predicted stress. Metal NPs can also enhance the structure of chlorophyll and facilitate the formation of pigments and metabolic activities [90,91,92]. It has been noted that copper is a microelement needed in small quantities for normal plant growth, due to it being a structural element in regulatory proteins, an activator of several enzymatic reactions, and a participant in the photosynthetic electron transport chain [93].

3.4.3. Carbohydrate and Protein Contents

The carbohydrate and protein contents of wheat plants were also assessed (Figure 6A,B). Non-significant increases were found in response to the foliar or soaking treatments of CuO-NPs at 50 and 100 ppm. The foliar treatment at 50 ppm recorded the highest increase in carbohydrate (21%) and protein (13%) contents as compared to the control. Carbohydrate and protein contents were reduced with increased CuO-NP concentrations (100 ppm) but did not decline below the control level. It is well noted that Cu ions in small concentrations can stimulate plant growth due to its role as an essential crop micronutrient [94,95], its direct participation in redox enzymes, and its involvement in chlorophyll synthesis and protein and carbohydrate metabolism [96]. Our findings are in line with the investigation of Singh et al. [82] on tomato plants, who found that a lower concentration of CuO-NPs (10 mg·L−1) exhibited an increase (7%) in carbohydrate content. Additionally, Ochoa et al. [97] observed non-significant increases in the protein contents of green pea (Pisum sativum) plants after adding 50 and 100 mg/kg soil of CuO-NPs. Wheat plants subjected to CuO-NPs in concentrations ranging from 0.2 ppm to 1.0 ppm exhibited significant increases in different agronomic attributes [98].

3.4.4. Antioxidant Enzyme Activities

The activities of antioxidant enzymes were influenced in wheat plants exposed to 50 or 100 ppm of CuO-NPs for both application methods (Figure 7A–C). All tested concentrations of CuO-NPs caused improvements in the levels of superoxide dismutase (SOD), peroxidase (POD), and ascorbate peroxidase (APX). The most significant enhancements were recorded for the foliar treatment with CuO-NPs at 50 ppm in SOD activity (approximately 42.9%) and the foliar treatment with CuO-NPs at 100 ppm in POD and APX activities (approximately 42.4% and 41.9%, respectively). Our results are in harmony with several investigations that showed the promotional role of CuO-NPs in antioxidant enzymes [82,83,99]. In some previous studies, APX and POD activities were found to be increased because of CuO-NP application [100,101]. Recent results from Sarkar et al. [102] demonstrated that APX and SOD activities were increased in lentil (Lens culinaris) plants treated with different concentrations of CuO-NPs (0.01, 0.025, and 0.05 mg·mL−1). Copper, an important micronutrient, participates in several physiological and biochemical processes, is required as an activator for superoxide dismutase [103], and is integrated into various enzymes, and it thus has a critical role in plant growth and nutrition [98]. The increased activities of antioxidant enzymes displayed a protective role against oxidative damage in plants.
According to obtained data, we can conclude that 50 ppm of CuO-NPs exhibits more positive effects on the morphological and physiological traits of the wheat plant than 100 ppm. Foliar spraying appears to be more effective than soaking, which can be attributed to the spraying method ensuring a more uniform spread over the crop canopy, in addition to eliciting a more immediate response from the crops [104]. Foliar spray showed significant superiority compared with soaking and coating methods. Sarkar et al. [105] reported that the foliar application with micronutrients could be more effective than other methods because it overcomes deficiency problems in the soil amendment or grain soaking.

4. Conclusions

In our investigation, we successfully biosynthesized CuO-NPs using the biomass filtrate from the A. niger strain (G3-1) and characterized the CuO-NPs using UV–vis spectroscopy, XRD, TEM, SEM-EDX, FT-IR, and XPS analyses. Crystallographic, spherical CuO-NPs in sizes ranging from 14.0 to 47.37 nm were synthesized at different bending energies. We found that the biosynthesized CuO-NPs exhibited high efficacy against Sitophilus granarius and Rhyzopertha dominica insects, which cause damage to stored wheat grains. Moreover, the foliar or soaking treatment of wheat plants by CuO-NPs at different concentrations did not exhibit toxicity or inhibit the growth characteristics of the wheat plants but rather displayed some enhancements. The most significant plant enhancements were recorded at lower concentrations of CuO-NPs. Morphological attributes (lengths, fresh weight, and dry weight of root and shoot, as well as leaves number) and leaf pigments (chlorophylls and carotenoids) were increased in response to CuO-NP treatments. Soluble carbohydrates and proteins were insignificantly boosted. Biosynthesized CuO-NPs were found to markedly promote and induce the activities of antioxidant enzymes. Our study recommends the use of lower concentrations of CuO-NPs in agricultural fields as insecticides that do not inhibit plant growth. Therefore, we can conclude that the positive impact of green-synthesized CuO-NPs is a promising strategy for use against insects and to enhance plant growth.

Author Contributions

Conceptualization, A.A.B., N.A.H.A., S.S.S. and A.F.; methodology, A.A.B., N.A.H.A., S.S.S., M.F.A. and A.F.; software, A.A.B., N.A.H.A., S.S.S. and A.F.; validation, A.A.B., N.A.H.A., S.S.S. and A.F.; formal analysis, A.A.B., N.A.H.A., S.S.S. and A.F.; investigation, A.A.B., N.A.H.A., S.S.S. and A.F.; resources, A.A.B., N.A.H.A., S.S.S. and A.F.; data curation, A.A.B., N.A.H.A., S.S.S. and A.F.; writing—original draft preparation, A.A.B., N.A.H.A., S.S.S. and A.F.; writing—review and editing, A.A.B., N.A.H.A., S.S.S. and A.F.; visualization, A.A.B., N.A.H.A., S.S.S. and A.F.; supervision, A.A.B., N.A.H.A., S.S.S. and A.F.; project administration, A.A.B., N.A.H.A., S.S.S. and A.F.; funding acquisition, M.F.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available on request from the corresponding author.

Acknowledgments

The authors extend their appreciation to Taif University for funding the current work under Taif University Researchers Supporting Project (number TURSP—2020/111), Taif University, Taif, Saudi Arabia.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Mali, S.C.; Dhaka, A.; Githala, C.K.; Trivedi, R. Green synthesis of copper nanoparticles using Celastrus paniculatus Willd. leaf extract and their photocatalytic and antifungal properties. Biotechnol. Rep. 2020, 27, e00518. [Google Scholar] [CrossRef] [PubMed]
  2. Fouda, A.; Abdel-Maksoud, G.; Abdel-Rahman, M.A.; Salem, S.S.; Hassan, S.E.D.; El-Sadany, M.A.H. Eco-friendly approach utilizing green synthesized nanoparticles for paper conservation against microbes involved in biodeterioration of archaeological manuscript. Int. Biodeterior. Biodegrad. 2019, 142, 160–169. [Google Scholar] [CrossRef]
  3. Fouda, A.; Abdel-Maksoud, G.; Abdel-Rahman, M.A.; Eid, A.M.; Barghoth, M.G.; El-Sadany, M.A.H. Monitoring the effect of biosynthesized nanoparticles against biodeterioration of cellulose-based materials by Aspergillus niger. Cellulose 2019, 26, 6583–6597. [Google Scholar] [CrossRef]
  4. Pugazhendhi, A.; Prabhu, R.; Muruganantham, K.; Shanmuganathan, R.; Natarajan, S. Anticancer, antimicrobial and photocatalytic activities of green synthesized magnesium oxide nanoparticles (MgONPs) using aqueous extract of Sargassum wightii. J. Photochem. Photobiol. B Biol. 2019, 190, 86–97. [Google Scholar] [CrossRef]
  5. Lin, D.; Xing, B. Root uptake and phytotoxicity of ZnO nanoparticles. Environ. Sci. Technol. 2008, 42, 5580–5585. [Google Scholar] [CrossRef]
  6. Nel, A.; Xia, T.; Mädler, L.; Li, N. Toxic potential of materials at the nanolevel. Science 2006, 311, 622–627. [Google Scholar] [CrossRef] [Green Version]
  7. Shaheen, T.I.; Abd El Aty, A.A. In-situ green myco-synthesis of silver nanoparticles onto cotton fabrics for broad spectrum antimicrobial activity. Int. J. Biol. Macromol. 2018, 118, 2121–2130. [Google Scholar] [CrossRef]
  8. Salem, S.S.; Fouda, A. Green synthesis of metallic nanoparticles and their prospective biotechnological applications: An Overview. Biol. Trace Elem. Res. 2020, 199, 344–370. [Google Scholar] [CrossRef]
  9. Majumdar, T.D.; Singh, M.; Thapa, M.; Dutta, M.; Mukherjee, A.; Ghosh, C.K. Size-dependent antibacterial activity of copper nanoparticles against Xanthomonas oryzae pv. Oryzae—A synthetic and mechanistic approach. Colloid Interface Sci. Commun. 2019, 32, 100190. [Google Scholar] [CrossRef]
  10. Fouda, A.; Salem, S.S.; Wassel, A.R.; Hamza, M.F.; Shaheen, T.I. Optimization of green biosynthesized visible light active CuO/ZnO nano-photocatalysts for the degradation of organic methylene blue dye. Heliyon 2020, 6, e04896. [Google Scholar] [CrossRef] [PubMed]
  11. Cuevas, R.; Durán, N.; Diez, M.C.; Tortella, G.R.; Rubilar, O. extracellular biosynthesis of copper and copper oxide nanoparticles by Stereum hirsutum, a native white-rot fungus from Chilean forests. J. Nanomater. 2015, 2015, 789089. [Google Scholar] [CrossRef] [Green Version]
  12. Hammad, S.A.R.; Ali, O.A.M. Physiological and biochemical studies on drought tolerance of wheat plants by application of amino acids and yeast extract. Ann. Agric. Sci. 2014, 59, 133–145. [Google Scholar] [CrossRef] [Green Version]
  13. Abdullah, A.S.; Aziz, M.M.; Siddique, K.H.M.; Flower, K.C. Film antitranspirants increase yield in drought stressed wheat plants by maintaining high grain number. Agric. Water Manag. 2015, 159, 11–18. [Google Scholar] [CrossRef]
  14. Fields, P.G. Effect of Pisum sativum fractions on the mortality and progeny production of nine stored-grain beetles. J. Stored Prod. Res. 2006, 42, 86–96. [Google Scholar] [CrossRef]
  15. Edde, P.A. A review of the biology and control of Rhyzopertha dominica (F.) the lesser grain borer. J. Stored Prod. Res. 2012, 48, 1–18. [Google Scholar] [CrossRef]
  16. Casida, J.E. Pyrethrum flowers and pyrethroid insecticides. Environ. Health Perspect. 1980, 34, 189–202. [Google Scholar] [CrossRef]
  17. Yruela, I. Copper in plants. Braz. J. Plant. Physiol. 2005, 17, 145–156. [Google Scholar] [CrossRef] [Green Version]
  18. Da Costa, M.V.J.; Sharma, P.K. Effect of copper oxide nanoparticles on growth, morphology, photosynthesis, and antioxidant response in Oryza sativa. Photosynthetica 2016, 54, 110–119. [Google Scholar] [CrossRef]
  19. Lequeux, H.; Hermans, C.; Lutts, S.; Verbruggen, N. Response to copper excess in Arabidopsis thaliana: Impact on the root system architecture, hormone distribution, lignin accumulation and mineral profile. Plant. Physiol. Biochem. 2010, 48, 673–682. [Google Scholar] [CrossRef]
  20. Feigl, G.; Kumar, D.; Lehotai, N.; Tugyi, N.; Molnár, Á.; Ördög, A.; Szepesi, Á.; Gémes, K.; Laskay, G.; Erdei, L.; et al. Physiological and morphological responses of the root system of Indian mustard (Brassica juncea L. Czern.) and rapeseed (Brassica napus L.) to copper stress. Ecotoxicol. Environ. Saf. 2013, 94, 179–189. [Google Scholar] [CrossRef] [Green Version]
  21. Mourato, M.P.; Moreira, I.N.; Leitão, I.; Pinto, F.R.; Sales, J.R.; Martins, L.L. Effect of heavy metals in plants of the genus Brassica. Int. J. Mol. Sci. 2015, 16, 17975–17998. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  22. Fouda, A.; Mohamed, A.; Elgamal, M.S.; EL-Din-Hassan, S.; Salem-Salem, S.; Shaheen, T.I. Facile approach towards medical textiles via myco-synthesis of silver nanoparticles. Der Pharma Chemica 2017, 9, 11–18. [Google Scholar]
  23. Alsharif, S.M.; Salem, S.S.; Abdel-Rahman, M.A.; Fouda, A.; Eid, A.M.; El-Din Hassan, S.; Awad, M.A.; Mohamed, A.A. Multifunctional properties of spherical silver nanoparticles fabricated by different microbial taxa. Heliyon 2020, 6, e03943. [Google Scholar] [CrossRef]
  24. Rolim, W.R.; Pelegrino, M.T.; de Araújo-Lima, B.; Ferraz, L.S.; Costa, F.N.; Bernardes, J.S.; Rodigues, T.; Brocchi, M.; Seabra, A.B. Green tea extract mediated biogenic synthesis of silver nanoparticles: Characterization, cytotoxicity evaluation and antibacterial activity. Appl. Surf. Sci. 2019, 463, 66–74. [Google Scholar] [CrossRef]
  25. Soliman, A.M.; Abdel-Latif, W.; Shehata, I.H.; Fouda, A.; Abdo, A.M.; Ahmed, Y.M. Green approach to overcome the resistance pattern of Candida spp. using biosynthesized silver nanoparticles fabricated by Penicillium chrysogenum F9. Biol. Trace Elem. Res. 2020, 199, 800–811. [Google Scholar] [CrossRef]
  26. Shaheen, T.I.; Fouda, A. Green approach for one-pot synthesis of silver nanorod using cellulose nanocrystal and their cytotoxicity and antibacterial assessment. Int. J. Biol. Macromol. 2018, 106, 784–792. [Google Scholar] [CrossRef]
  27. Wei, Y.; Salih, K.A.M.; Lu, S.; Hamza, M.F.; Fujita, T.; Vincent, T.; Guibal, E. Amidoxime functionalization of algal/polyethyleneimine beads for the sorption of Sr(II) from aqueous solutions. Molecules 2019, 24, 3893. [Google Scholar] [CrossRef] [Green Version]
  28. El-Lakwah, F.; Darwish, A.; Halawa, Z. Toxic effect of extracts and powders of some plants against the cowpea beetle (Callosobruchus maculatus, F.). Ann. Agric. Sci. Moshtohor 1996, 34, 1849–1859. [Google Scholar]
  29. Licthenthaler, H. Chlorophylls and carotenoids: Pigments of photosynthetic apparatus biomembranes. Methods Enzymol. 1987, 148, 349–382. [Google Scholar]
  30. Umbreit, W.W.; Burris, R.H.; Stauffer, J.F. Manometric Techniques: A Manual Describing Methods Applicable to the Study of Tissue Metabolism; Burgess: Minneapolis, MN, USA, 1957. [Google Scholar]
  31. Lowry, O.H.; Rosebrough, N.J.; Farr, A.L.; Randall, R.J. Protein measurement with the Folin phenol reagent. J. Biol. Chem. 1951, 193, 265–275. [Google Scholar] [CrossRef]
  32. Marklund, S.; Marklund, G. Involvement of the superoxide anion radical in the autoxidation of pyrogallol and a convenient assay for superoxide dismutase. Eur. J. Biochem. 1974, 47, 469–474. [Google Scholar] [CrossRef]
  33. Bergmeyer, H. Methods of Enzymatic Analysis, 2nd ed.; Academic Press: Cambridge, MA, USA, 1974. [Google Scholar]
  34. Chen, G.-X.; Asada, K. Inactivation of ascorbate peroxidase by thiols requires hydrogen peroxide. Plant. Cell Physiol. 1992, 33, 117–123. [Google Scholar]
  35. Siddiqi, K.S.; Husen, A. Current status of plant metabolite-based fabrication of copper/copper oxide nanoparticles and their applications: A review. Biomater. Res. 2020, 24, 11. [Google Scholar] [CrossRef] [PubMed]
  36. Nagajyothi, P.C.; Muthuraman, P.; Sreekanth, T.V.M.; Kim, D.H.; Shim, J. Green synthesis: In-vitro anticancer activity of copper oxide nanoparticles against human cervical carcinoma cells. Arab. J. Chem. 2017, 10, 215–225. [Google Scholar] [CrossRef] [Green Version]
  37. Lashin, I.; Fouda, A.; Gobouri, A.A.; Azab, E.; Mohammedsaleh, Z.M.; Makharita, R.R. Antimicrobial and in vitro cytotoxic efficacy of biogenic silver nanoparticles (Ag-NPs) fabricated by callus extract of Solanum incanum L. Biomolecules 2021, 11, 341. [Google Scholar] [CrossRef] [PubMed]
  38. Fouda, A.; Hassan, S.E.-D.; Saied, E.; Azab, M.S. An eco-friendly approach to textile and tannery wastewater treatment using maghemite nanoparticles (γ-Fe2O3-NPs) fabricated by Penicillium expansum strain (K-w). J. Environ. Chem. Eng. 2021, 9, 104693. [Google Scholar] [CrossRef]
  39. Rabiee, N.; Bagherzadeh, M.; Kiani, M.; Ghadiri, A.M.; Etessamifar, F.; Jaberizadeh, A.H.; Shakeri, A. Biosynthesis of copper oxide nanoparticles with potential biomedical applications. Int. J. Nanomed. 2020, 15, 3983–3999. [Google Scholar] [CrossRef]
  40. Yin, M.; Wu, C.-K.; Lou, Y.; Burda, C.; Koberstein, J.T.; Zhu, Y.; O’Brien, S. Copper Oxide Nanocrystals. J. Am. Chem. Soc. 2005, 127, 9506–9511. [Google Scholar] [CrossRef] [PubMed]
  41. Abboud, Y.; Saffaj, T.; Chagraoui, A.; el Bouari, A.; Brouzi, K.; Tanane, O.; Ihssane, B. Biosynthesis, characterization and antimicrobial activity of copper oxide nanoparticles (CONPs) produced using brown alga extract (Bifurcaria bifurcata). Appl. Nanosci. 2014, 4, 571–576. [Google Scholar] [CrossRef] [Green Version]
  42. Udayabhanu-Nethravathi, P.C.; Pavan-Kumar, M.A.; Suresh, D.; Lingaraju, K.; Rajanaika, H.; Nagabhushana, H.; Sharma, S.C. Tinospora cordifolia mediated facile green synthesis of cupric oxide nanoparticles and their photocatalytic, antioxidant and antibacterial properties. Mater. Sci. Semicond. Process. 2015, 33, 81–88. [Google Scholar]
  43. Hassan, S.E.L.D.; Salem, S.S.; Fouda, A.; Awad, M.A.; El-Gamal, M.S.; Abdo, A.M. New approach for antimicrobial activity and bio-control of various pathogens by biosynthesized copper nanoparticles using endophytic actinomycetes. J. Radiat. Res. Appl. Sci. 2018, 11, 262–270. [Google Scholar] [CrossRef] [Green Version]
  44. Krithiga, N.; Jayachitra, A.; Rajalakshmi, A. Synthesis, characterization and analysis of the effect of copper oxide nanoparticles in biological systems. Ind. J. NS 2013, 1, 6–15. [Google Scholar]
  45. Gopinath, V.; Priyadarshini, S.; Al-Maleki, A.R.; Alagiri, M.; Yahya, R.; Saravanan, S.; Vadivelu, J. In vitro toxicity, apoptosis and antimicrobial effects of phyto-mediated copper oxide nanoparticles. RSC Adv. 2016, 6, 110986–110995. [Google Scholar] [CrossRef]
  46. Cullity, B. Elements of X-ray Diffraction, 2nd ed.; Addison-Wesley: Boston, MA, USA, 1978; pp. 99–106. [Google Scholar]
  47. Hassan, S.E.D.; Fouda, A.; Radwan, A.A.; Salem, S.S.; Barghoth, M.G.; Awad, M.A.; Abdo, A.M.; El-Gamal, M.S. Endophytic actinomycetes Streptomyces spp. mediated biosynthesis of copper oxide nanoparticles as a promising tool for biotechnological applications. J. Biol. Inorg. Chem. 2019, 24, 377–393. [Google Scholar] [CrossRef] [PubMed]
  48. Fouda, A.; Hassan, S.E.D.; Abdo, A.M.; El-Gamal, M.S. Antimicrobial, antioxidant and larvicidal activities of spherical silver nanoparticles synthesized by endophytic Streptomyces spp. Biol. Trace Elem. Res. 2020, 195, 707–724. [Google Scholar] [CrossRef]
  49. Manjari, G.; Saran, S.; Arun, T.; Vijaya-Bhaskara-Rao, A.; Devipriya, S.P. Catalytic and recyclability properties of phytogenic copper oxide nanoparticles derived from Aglaia elaeagnoidea flower extract. J. Saudi Chem. Soc. 2017, 21, 610–618. [Google Scholar] [CrossRef]
  50. Shaheen, T.I.; Fouda, A.; Salem, S.S. Integration of cotton fabrics with biosynthesized CuO nanoparticles for bactericidal activity in the terms of their cytotoxicity assessment. Ind. Eng. Chem. Res. 2021, 60, 1553–1563. [Google Scholar] [CrossRef]
  51. Lu, P.J.; Fang, S.W.; Cheng, W.L.; Huang, S.C.; Huang, M.C.; Cheng, H.F. Characterization of titanium dioxide and zinc oxide nanoparticles in sunscreen powder by comparing different measurement methods. J. Food Drug Anal. 2018, 26, 1192–1200. [Google Scholar] [CrossRef]
  52. Eltarahony, M.; Zaki, S.; Abd-El-Haleem, D. Concurrent synthesis of zero- and one-dimensional, spherical, rod-, needle-, and wire-shaped CuO nanoparticles by Proteus mirabilis 10B. J. Nanomater. 2018, 2018, 1849616. [Google Scholar] [CrossRef] [Green Version]
  53. Alhazmi, H.A. FT-IR Spectroscopy for the identification of binding sites and measurements of the binding interactions of important metal ions with bovine serum albumin. Sci. Pharm. 2019, 87, 5. [Google Scholar] [CrossRef] [Green Version]
  54. Mohamed, A.A.; Abu-Elghait, M.; Ahmed, N.E.; Salem, S.S. Eco-friendly mycogenic synthesis of ZnO and CuO nanoparticles for in vitro antibacterial, antibiofilm, and antifungal applications. Biol. Trace Elem. Res. 2020. [Google Scholar] [CrossRef]
  55. Saravanakumar, K.; Shanmugam, S.; Varukattu, N.B.; MubarakAli, D.; Kathiresan, K.; Wang, M.-H. Biosynthesis and characterization of copper oxide nanoparticles from indigenous fungi and its effect of photothermolysis on human lung carcinoma. J. Photochem. Photobiol. B Biol. 2019, 190, 103–109. [Google Scholar] [CrossRef] [PubMed]
  56. Gnanavel, V.; Palanichamy, V.; Roopan, S.M. Biosynthesis and characterization of copper oxide nanoparticles and its anticancer activity on human colon cancer cell lines (HCT-116). J. Photochem. Photobiol. B Biol. 2017, 171, 133–138. [Google Scholar] [CrossRef]
  57. Sankar, R.; Maheswari, R.; Karthik, S.; Shivashangari, K.S.; Ravikumar, V. Anticancer activity of Ficus religiosa engineered copper oxide nanoparticles. Mater. Sci. Eng. C 2014, 44, 234–239. [Google Scholar] [CrossRef]
  58. Sankar, R.; Manikandan, P.; Malarvizhi, V.; Fathima, T.; Shivashangari, K.S.; Ravikumar, V. Green synthesis of colloidal copper oxide nanoparticles using Carica papaya and its application in photocatalytic dye degradation. Spectrochimica Acta Part A Mol. Biomol. Spectrosc. 2014, 121, 746–750. [Google Scholar] [CrossRef] [PubMed]
  59. Hamza, M.F.; Wei, Y.; Mira, H.I.; Abdel-Rahman, A.A.H.; Guibal, E. Synthesis and adsorption characteristics of grafted hydrazinyl amine magnetite-chitosan for Ni(II) and Pb(II) recovery. Chem. Eng. J. 2019, 362, 310–324. [Google Scholar] [CrossRef] [Green Version]
  60. Jurado-Lopez, B.; Vieira, R.S.; Rabelo, R.B.; Beppu, M.M.; Casado, J.; Rodriguez-Castellon, E. Formation of complexes between functionalized chitosan membranes and copper: A study by angle resolved XPS. Mater. Chem. Phys. 2017, 185, 152–161. [Google Scholar] [CrossRef]
  61. Sun, Y.B.; Wang, X.X.; Ding, C.C.; Cheng, W.C.; Chen, C.L.; Hayat, T.; Alsaedi, A.; Hu, J.; Wang, X.K. Direct synthesis of bacteria-derived carbonaceous nanofibers as a highly efficient material for radionuclides elimination. ACS Sustain. Chem. Eng. 2016, 4, 4608–4616. [Google Scholar] [CrossRef]
  62. Lopez, E.O.; Rossi, A.L.; Archanjo, B.S.; Ospina, R.O.; Mello, A.; Rossi, A.M. Crystalline nano-coatings of fluorine-substituted hydroxyapatite produced by magnetron sputtering with high plasma confinement. Surf. Coat. Technol. 2015, 264, 163–174. [Google Scholar] [CrossRef]
  63. Yang, K.; Zhong, L.; Guan, R.; Xiao, M.; Han, D.; Wang, S.; Meng, Y. Carbon felt interlayer derived from rice paper and its synergistic encapsulation of polysulfides for lithium-sulfur batteries. Appl. Surf. Sci. 2018, 441, 914–922. [Google Scholar] [CrossRef]
  64. Zhang, Y.W.; Si, R.; Liao, C.S.; Yan, C.H. Facile alcohothermal synthesis, size-dependent ultraviolet absorption, and enhanced CO conversion activity of ceria nanocrystals. J. Phys. Chem. B 2003, 107, 10159–10167. [Google Scholar] [CrossRef]
  65. Lu, S.; Chen, L.; Hamza, M.F.; He, C.; Wang, X.; Wei, Y.; Guibal, E. Amidoxime functionalization of a poly(acrylonitrile)/silica composite for the sorption of Ga(III)—Application to the treatment of Bayer liquor. Chem. Eng. J. 2019, 368, 459–473. [Google Scholar] [CrossRef]
  66. Wang, F.; Li, H.; Liu, Q.; Li, Z.; Li, R.; Zhang, H.; Liu, L.; Emelchenko, G.A.; Wang, J. A graphene oxide/amidoxime hydrogel for enhanced uranium capture. Sci. Rep. 2016, 6, 19367. [Google Scholar] [CrossRef]
  67. Tas, S.; Kaynan, O.; Ozden-Yenigun, E.; Nijmeijer, K. Polyacrylonitrile (PAN)/crown ether composite nanofibers for the selective adsorption of cations. RSC Adv. 2016, 6, 3608–3616. [Google Scholar] [CrossRef] [Green Version]
  68. Regnault-Roger, C.; Philogène, B.J.R. Past and current prospects for the use of botanicals and plant allelochemicals in integrated pest management. Pharm. Biol. 2008, 46, 41–52. [Google Scholar] [CrossRef]
  69. Said-Al-Ahl, H.; Hikal, W.M.; Tkachenko, K.G. Essential oils with potential as insecticidal agents: A review. Int. J. Env. Plan. Manag. 2017, 3, 23–33. [Google Scholar]
  70. Paul, S.; Das, S. Natural insecticidal proteins, the promising bio-control compounds for future crop protection. Nucleus 2020, 64, 7–20. [Google Scholar] [CrossRef]
  71. El-Saadony, M.T.; El-Hack, A.; Mohamed, E.; Taha, A.E.; Fouda, M.M.; Ajarem, J.S.; Maodaa, S.N.; Allam, A.A.; Elshaer, N. Ecofriendly synthesis and insecticidal application of copper nanoparticles against the storage pest Tribolium castaneum. Nanomaterials 2020, 10, 587. [Google Scholar] [CrossRef] [Green Version]
  72. Malaikozhundan, B.; Vaseeharan, B.; Vijayakumar, S.; Thangaraj, M.P. Bacillus thuringiensis coated zinc oxide nanoparticle and its biopesticidal effects on the pulse beetle, Callosobruchus maculatus. J. Photochem. Photobiol. B Biol. 2017, 174, 306–314. [Google Scholar] [CrossRef] [PubMed]
  73. Selvan, S.M.; Anand, K.V.; Govindaraju, K.; Tamilselvan, S.; Kumar, V.G.; Subramanian, K.S.; Kannan, M.; Raja, K. Green synthesis of copper oxide nanoparticles and mosquito larvicidal activity against dengue, zika and chikungunya causing vector Aedes aegypti. IET Nanobiotechnology 2018, 12, 1042–1046. [Google Scholar] [CrossRef]
  74. Gunalan, S.; Sivaraj, R.; Venckatesh, R. Aloe barbadensis Miller mediated green synthesis of mono-disperse copper oxide nanoparticles: Optical properties. Spectrochimica Acta Part A Mol. Biomol. Spectrosc. 2012, 97, 1140–1144. [Google Scholar] [CrossRef] [PubMed]
  75. Yamanaka, K.; Chun, S.J.; Boillee, S.; Fujimori-Tonou, N.; Yamashita, H.; Gutmann, D.H.; Takahashi, R.; Misawa, H.; Cleveland, D.W. Astrocytes as determinants of disease progression in inherited amyotrophic lateral sclerosis. Nat. Neurosci. 2008, 11, 251–253. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  76. Oberdörster, G.; Oberdörster, E.; Oberdörster, J. Nanotoxicology: An emerging discipline evolving from studies of ultrafine particles. Environ. Health Perspect. 2005, 113, 823–839. [Google Scholar] [CrossRef]
  77. Mocquot, B.; Vangronsveld, J.; Clijsters, H.; Mench, M. Copper toxicity in young maize (Zea mays L.) plants: Effects on growth, mineral and chlorophyll contents, and enzyme activities. Plant. Soil 1996, 182, 287–300. [Google Scholar] [CrossRef]
  78. Khatun, S.; Ali, M.B.; Hahn, E.-J.; Paek, K.-Y. Copper toxicity in Withania somnifera: Growth and antioxidant enzymes responses of in vitro grown plants. Environ. Exp. Bot. 2008, 64, 279–285. [Google Scholar] [CrossRef]
  79. Rajput, V.; Chaplygin, V.; Gorovtsov, A.; Fedorenko, A.; Azarov, A.; Chernikova, N.; Barakhov, A.; Minkina, T.; Maksimov, A.; Mandzhieva, S.; et al. Assessing the toxicity and accumulation of bulk- and nano-CuO in Hordeum sativum L. Environ. Geochem. Health 2020. [Google Scholar] [CrossRef]
  80. Wang, Z.; von dem Bussche, A.; Kabadi, P.K.; Kane, A.B.; Hurt, R.H. Biological and environmental transformations of copper-based nanomaterials. ACS Nano 2013, 7, 8715–8727. [Google Scholar] [CrossRef] [Green Version]
  81. Maithreyee, M.; Gowda, R. Influence of nanoparticles in enhancing seed quality of aged seeds. Mysore J. Agric. Sci. 2015, 49, 310–313. [Google Scholar]
  82. Singh, A.; Singh, N.B.; Hussain, I.; Singh, H. Effect of biologically synthesized copper oxide nanoparticles on metabolism and antioxidant activity to the crop plants Solanum lycopersicum and Brassica oleracea var. botrytis. J. Biotechnol. 2017, 262, 11–27. [Google Scholar] [CrossRef]
  83. Ananda, S.; Shobha, G.; Shashidhara, K.; Mahadimane, V. Nano-cuprous oxide enhances seed germination and seedling growth in Lycopersicum esculentum plants. J. Drug Deliv. Ther. 2019, 9, 296–302. [Google Scholar]
  84. Yang, Z.; Xiao, Y.; Jiao, T.; Zhang, Y.; Chen, J.; Gao, Y. Effects of copper oxide nanoparticles on the growth of rice (Oryza Sativa L.) seedlings and the relevant physiological responses. Int. J. Environ. Res. Public Health 2020, 17, 1260. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  85. Yasmeen, F.; Razzaq, A.; Iqbal, M.N.; Jhanzab, H.M. Effect of silver, copper and iron nanoparticles on wheat germination. Int. J. Biosci. 2015, 6, 112–117. [Google Scholar]
  86. Zuverza-Mena, N.; Medina-Velo, I.A.; Barrios, A.C.; Tan, W.; Peralta-Videa, J.R.; Gardea-Torresdey, J.L. Copper nanoparticles/compounds impact agronomic and physiological parameters in cilantro (Coriandrum sativum). Environ. Sci. Process. Impacts 2015, 17, 1783–1793. [Google Scholar] [CrossRef] [PubMed]
  87. Hafeez, A.; Razzaq, A.; Mahmood, T.; Jhanzab, H.M. Potential of copper nanoparticles to increase growth and yield of wheat. J. Nanosci. Adv. Technol. 2015, 1, 6–11. [Google Scholar]
  88. Baskar, V.; Nayeem, S.; Kuppuraj, S.P.; Muthu, T.; Ramalingam, S. Assessment of the effects of metal oxide nanoparticles on the growth, physiology and metabolic responses in vitro grown eggplant (Solanum melongena). 3 Biotech. 2018, 8, 362. [Google Scholar] [CrossRef] [PubMed]
  89. Young, A.J. The photoprotective role of carotenoids in higher plants. Physiol. Plant. 1991, 83, 702–708. [Google Scholar] [CrossRef]
  90. Amin, M.A.; Badawy, A. Metabolic changes in common bean plants in response to zinc nanoparticles and zinc sulfate. Int. J. Innov. Sci. Eng. Technol. 2017, 4, 321–335. [Google Scholar]
  91. Ewais, E.; Ismail, M.; Badawy, A. Vegetative growth, photosynthetic pigments and yield of Phaseolus vulgaris (L.) plants in response to the application of biologically-synthesized zinc oxide nanoparticles and zinc sulfate. Al Azhar Bull. Sci. 2017, 9, 33–46. [Google Scholar]
  92. Mazaherinia, S.; Astaraei, A.R.; Fotovat, A.; Monshi, A. Nano iron oxide particles efficiency on Fe, Mn, Zn and Cu concentrations in wheat plant. World Appl. Sci. J. 2010, 7, 36–40. [Google Scholar]
  93. Shobha, G.; Moses, V.; Ananda, S. Biological synthesis of copper nanoparticles and its impact. Int. J. Pharm. Sci. Invent. 2014, 3, 6–28. [Google Scholar]
  94. Wierzbicka, M.; Obidzińska, J. The effect of lead on seed imbibition and germination in different plant species. Plant. Sci. 1998, 137, 155–171. [Google Scholar] [CrossRef]
  95. Karlsson, H.L.; Gustafsson, J.; Cronholm, P.; Möller, L. Size-dependent toxicity of metal oxide particles—A comparison between nano- and micrometer size. Toxicol. Lett. 2009, 188, 112–118. [Google Scholar] [CrossRef]
  96. Fageria, N.K.; Baligar, V.C.; Clark, R. Physiology of Crop Production; CRC Press: Boca Raton, FL, USA, 2006. [Google Scholar]
  97. Ochoa, L.; Zuverza-Mena, N.; Medina-Velo, I.A.; Flores-Margez, J.P.; Peralta-Videa, J.R.; Gardea-Torresdey, J.L. Copper oxide nanoparticles and bulk copper oxide, combined with indole-3-acetic acid, alter aluminum, boron, and iron in Pisum sativum seeds. Sci. Total Environ. 2018, 634, 1238–1245. [Google Scholar] [CrossRef] [PubMed]
  98. Kasana, R.C.; Panwar, N.R.; Kaul, R.K.; Kumar, P. Biosynthesis and effects of copper nanoparticles on plants. Environ. Chem. Lett. 2017, 15, 233–240. [Google Scholar] [CrossRef]
  99. Wang, S.-H.; Yang, Z.-M.; Yang, H.; Lu, B.; Li, S.-Q.; Lu, Y.-P. Copper-induced stress and antioxidative responses in roots of Brassica juncea L. Bot. Bull. Acad. Sin. 2004, 45, 203–212. [Google Scholar]
  100. Shaw, A.K.; Hossain, Z. Impact of nano-CuO stress on rice (Oryza sativa L.) seedlings. Chemosphere 2013, 93, 906–915. [Google Scholar] [CrossRef]
  101. Nair, P.M.G.; Chung, I.M. Impact of copper oxide nanoparticles exposure on Arabidopsis thaliana growth, root system development, root lignificaion, and molecular level changes. Environ. Sci. Pollut. Res. 2014, 21, 12709–12722. [Google Scholar] [CrossRef] [PubMed]
  102. Sarkar, J.; Chakraborty, N.; Chatterjee, A.; Bhattacharjee, A.; Dasgupta, D.; Acharya, K. Green synthesized copper oxide nanoparticles ameliorate defence and antioxidant enzymes in Lens culinaris. Nanomaterials 2020, 10, 312. [Google Scholar] [CrossRef] [Green Version]
  103. Bowler, C.; Montagu, M.V.; Inze, D. Superoxide dismutase and stress tolerance. Annu. Rev. Plant Biol. 1992, 43, 83–116. [Google Scholar] [CrossRef]
  104. Mortvedt, J. Bioavailability of micronutrients. In Handbook of Soil Science; CRC Press: Boca Raton, FL, USA, 2000. [Google Scholar]
  105. Sarkar, D.; Mandal, B.; Kundu, M.C. Increasing use efficiency of boron fertilisers by rescheduling the time and methods of application for crops in India. Plant. Soil 2007, 301, 77–85. [Google Scholar] [CrossRef]
Figure 1. (A) UV–vis spectroscopic analysis of CuO-NPs synthesized by A. niger G3-1; (B) X-ray diffraction pattern of CuO-NPs showed intense peaks at specific 2 theta values.
Figure 1. (A) UV–vis spectroscopic analysis of CuO-NPs synthesized by A. niger G3-1; (B) X-ray diffraction pattern of CuO-NPs showed intense peaks at specific 2 theta values.
Biology 10 00233 g001
Figure 2. Characterization of CuO-NPs synthesized by A. niger G3-1; (A) transmission electron microscopy (TEM); (B) and (C) denote SEM-EDX spectra of biosynthesized CuO-NPs.
Figure 2. Characterization of CuO-NPs synthesized by A. niger G3-1; (A) transmission electron microscopy (TEM); (B) and (C) denote SEM-EDX spectra of biosynthesized CuO-NPs.
Biology 10 00233 g002
Figure 3. FT-IR of fungal biomass filtrate and CuO-NPs synthesized by Aspergillus niger G3-1.
Figure 3. FT-IR of fungal biomass filtrate and CuO-NPs synthesized by Aspergillus niger G3-1.
Biology 10 00233 g003
Figure 4. XPS analysis of CuO-NPs synthesized by A. niger strain G3-1. (A) Overall survey; (B) core CuO-NPs; (CE) C 1s, O 1s, N 1s, respectively, of CuO-NPs.
Figure 4. XPS analysis of CuO-NPs synthesized by A. niger strain G3-1. (A) Overall survey; (B) core CuO-NPs; (CE) C 1s, O 1s, N 1s, respectively, of CuO-NPs.
Biology 10 00233 g004
Figure 5. Assessing the effect of CuO-NPs on the total chlorophyll (A) and carotenoid (B) contents (mg/g FW) in wheat plants. Data are statistically different at p ≤0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at the significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Figure 5. Assessing the effect of CuO-NPs on the total chlorophyll (A) and carotenoid (B) contents (mg/g FW) in wheat plants. Data are statistically different at p ≤0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at the significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Biology 10 00233 g005
Figure 6. The efficacy of CuO-NPs on soluble carbohydrate (A) and soluble protein (B) contents (mg/g DW) in wheat plants. Data are statistically different at p ≤ 0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at the significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Figure 6. The efficacy of CuO-NPs on soluble carbohydrate (A) and soluble protein (B) contents (mg/g DW) in wheat plants. Data are statistically different at p ≤ 0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at the significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Biology 10 00233 g006
Figure 7. Antioxidant enzymatic activities of a wheat plant treated with CuO-NPs at two concentrations (50 and 100 ppm) by foliar spray and soaking method. (A) Superoxide dismutase, (B) peroxidase, and (C) ascorbate peroxidase activities (unit/g FW). Data are statistically different at p ≤ 0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at a significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Figure 7. Antioxidant enzymatic activities of a wheat plant treated with CuO-NPs at two concentrations (50 and 100 ppm) by foliar spray and soaking method. (A) Superoxide dismutase, (B) peroxidase, and (C) ascorbate peroxidase activities (unit/g FW). Data are statistically different at p ≤ 0.05 by Tukey’s test, (n = 3); different letters on bars indicate that mean values are significantly different at a significant level of (p ≤ 0.05), error bars are means ± standard error (SE).
Biology 10 00233 g007
Table 1. The efficacy of CuO-NPs synthesized using A. niger G3-1 against S. granaries insect.
Table 1. The efficacy of CuO-NPs synthesized using A. niger G3-1 against S. granaries insect.
NP Conc. (mg)/100 g
Wheat Grains
Accumulated Mortality Percentages (%)Reduction in F1%
2 Days4 Days6 Days8 Days10 Days
3003.3 ± 1.636.7 ± 3.375.9 ± 6.790.8 ± 1.694.4 ± 2.980
2502.5 ± 1.435 ± 2.972.2 ± 5.886.1 ± 1.488.9 ± 067.5
2000 ± 030 ± 5.863.9 ± 4.366.7 ± 5.877.8 ± 065
1500 ± 030 ± 7.663 ± 1070.3 ± 1072.2 ± 8.765
1000 ± 025 ± 044.4 ± 055.6 ± 055.6 ± 070
Table 2. The efficacy of CuO-NPs synthesized using A. niger G3-1 against R. dominica insect.
Table 2. The efficacy of CuO-NPs synthesized using A. niger G3-1 against R. dominica insect.
NP Conc.
(mg)/100 g Wheat Grains
Accumulated Mortality Percentages (%)Reduction in F1%
2 Days4 Days6 Days8 Days10 Days
3001.7 ± 1.636.7 ± 8.670 ± 1585 ± 7.590 ± 5.8100
2505 ± 2.945 ± 8.765 ± 14.480 ± 11.585 ± 8.7100
2005 ± 2.937.5 ± 1.472.5 ± 1.477.5 ± 1.482.5 ± 1.4100
1500 ± 023.3 ± 6.355 ± 13.366.7 ± 1373.3 ± 11.533
1005 ± 523.3 ± 6.655 ± 12.565 ± 12.570 ± 10.433
Table 3. Assessing the effect of CuO-NPs on wheat plant growth parameters including root length (cm), shoot length (cm), leaves number, root fresh weight (g), root dry weight (g), shoot fresh weight (g), and shoot dry weight (g).
Table 3. Assessing the effect of CuO-NPs on wheat plant growth parameters including root length (cm), shoot length (cm), leaves number, root fresh weight (g), root dry weight (g), shoot fresh weight (g), and shoot dry weight (g).
Treatments/
ppm
Morphological Parameters
Root Length (cm)Shoot Length (cm)Leaves
Number
Root Fresh Weight (g)Root Dry
Weight (g)
Shoot Fresh Weight (g)Shoot Dry
Weight (g)
Control8.78 ± 0.21 b47.38 ± 0.82 b5.2 ± 0.2 b0.63 ± 0.04 b0.18 ± 0.01 c4.15 ± 0.04 b0.98 ± 0.03 c
Foliar CuO-NPs 5013.16 ± 0.57 a56.76 ± 0.68 a6.6 ± 0.4 a1.09 ± 0.07 a0.33 ± 0.02 a6.45 ± 0.05 a1.42 ± 0.04 a
Foliar CuO-NPs 10012.94 ± 0.58 a53.76 ± 1.97 a 5.8 ± 0.2 ab1.04 ± 0.09 a0.29 ± 0.03 a5.82 ± 0.03 ab1.4 ± 0.05 a
Soaking CuO-NPs 5010.6 ± 0.48 b56.96 ± 0.9 a6.6 ± 0.4 a0.92 ± 0.12 ab0.28 ± 0.02 ab6.13 ± 0.04 a1.39 ± 0.04 ab
Soaking CuO-NPs 1009.82 ± 0.63 b54.92 ± 1.02 a6.4 ± 0.25 ab0.69 ± 0.05 b0.24 ± 0.02 bc6.01 ± 0.05 a1.24 ± 0.03 b
Different letters in the same column indicate that mean values are significantly different (p ≤ 0.05) by Tukey’s test, means ±standard error (SE) (n = 5).
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Badawy, A.A.; Abdelfattah, N.A.H.; Salem, S.S.; Awad, M.F.; Fouda, A. Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant. Biology 2021, 10, 233. https://doi.org/10.3390/biology10030233

AMA Style

Badawy AA, Abdelfattah NAH, Salem SS, Awad MF, Fouda A. Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant. Biology. 2021; 10(3):233. https://doi.org/10.3390/biology10030233

Chicago/Turabian Style

Badawy, Ali A., Nilly A. H. Abdelfattah, Salem S. Salem, Mohamed F. Awad, and Amr Fouda. 2021. "Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant" Biology 10, no. 3: 233. https://doi.org/10.3390/biology10030233

APA Style

Badawy, A. A., Abdelfattah, N. A. H., Salem, S. S., Awad, M. F., & Fouda, A. (2021). Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant. Biology, 10(3), 233. https://doi.org/10.3390/biology10030233

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop