Solvency II and IDD Directives are two principal EU insurance regulations covering (re-)insurance activity and insurance distribution respectively. The undertakings subject to these regulations range from traditional big (re-)insurance undertakings providing coverage to thousands of policyholders to small, specific captive insurance undertakings with only one policyholder. The selection of the insurance distributors is also fairly diversified as it includes the insurance undertakings, brokers, tied and independent agents, coverholders, and ancillary insurance intermediary. When the same regulation governs such a diversified market, to provide a business-friendly environment that is to the mutual benefit of both customers and regulated undertakings, it must be designed in a way that accommodates all different market participants. In other words, the regulation must avoid creating unnecessary burden that can discourage undertakings to take up business or to develop by, for example, employing innovations (
Harbo 2015, p. 37). In this vein, the principle of proportionality was introduced to Solvency II (
Van Hulle 2019, p. 171). Later on, proportionality was also adopted in IDD (see recitals 72, 17, 23 of IDD). Because the directives cover different areas of insurance law, the principle of proportionality embedded therein slightly differs, however, its function remains the same. Namely, in both directives,
proportionality serves to adjust the regulation to the specificity of an individual undertaking by allowing to increase or decrease the intensity of the regulation and supervision (see more in
Ostrowska 2020, p. 39;
Löfvendahl and Yong 2018, p. 4).
4.3.1. Proportionality in Solvency II—Insurance Activity
Since Solvency II imposes requirements regarding the insurance activity and the requirements are risk-based (
Purves 2011, p. 641),
the intensification of the regulation and supervision is adjusted to the risk profile of a regulated undertaking. The risk profile is defined by three criteria: nature, scale and complexity of the risks inherent in the business of an undertaking. Thus, in practice, application of proportionality comes down to calibrate a requirement to those three criteria.
Although nature, scale and complexity of a risk are not legally defined, the supervisory authorities made an effort to explain their meaning by issuing guidelines and other nonbinding instructions (see for instance
CEIOPS 2008;
EIOPA 2015a;
IAIS 2008). Based on these guidelines,
nature of the risk refers to the insurance risk of an undertaking. The insurer should consider whether it underwrites long- or short-tail business, whether it is a low frequency and high severity business or consists of high frequency and low severity risks and who are the policyholders (
CEIOPS 2008, p. 6).
Complexity of the risks refers to all the risks borne by the undertaking, including e.g., operational risk or market risk. The nature and complexity of the risks should thus provide a picture of the undertaking resulting from the analysis of the origination of the risks, the correlation between the types of risks and the mitigations and diversifications (
Grima 2020, p. 226). The full picture of a risk profile must be completed with
the scale of the risks which depends on the scale of the undertaking’s balance sheet and materiality of the risks (
CEIOPS 2008, p. 6).
Now, if an InsurTech company seeks to obtain an insurance license, it means that the business it wishes to pursue falls within the scope of the definition of the insurance activity and as such it presents the risks associated with the insurance activity. In other words, it results that the core of the activity of InsurTechs does not differ from the activity of the traditional insurance undertakings. Consequently, it is justified to subject the InsurTech company to the risk-based Solvency II Directive as the regulation introduced therein is appropriate and necessary to achieve the objectives of insurance regulation (see recital 133 of Solvency II Directive). At the same time, taking into account the specificity of InsurTechs as well as the role of proportionality, the principle should be considered instrumental in applying the regulation to the InsurTech companies.
There is no doubt that proportionality is an adequate tool to address the concerns regarding a too strict system of governance requirements or the excessive supervisory reporting and bring the InsurTech companies a regulatory relief, at least technically (see
Commission of the EC 2007, pp. 24–26). The following paragraphs will now demonstrate how proportionality may be of help for the InsurTechs on their way to adapt to Solvency II Directive as it stands today.
We start with the system of governance where Solvency II Directive does not prescribe any specific system of governance. This is because there is no one system that would work well for all undertakings. The variety of (re-)insurers subject to the EU insurance regulatory framework makes it impossible to create common rules on the organization of the system of governance, not to mention that neither would it be the best solution from the high-quality legislation perspective (i.e., criticized ‘one-size-fits-all’ approach). It is only possible to outline the results that are expected of the system of governance that is recognized as proportional, which EIOPA did by issuing Guidelines on system of governance (
EIOPA 2015a). For this reason, the regulation on system of governance is mostly principle-based which allows insurance undertakings to freely decide on their own system of governance as long as it is proportionate to the nature, scale and complexity of the operations of the insurers (Article 41(2) of Solvency II Directive). The principle of proportionality has been introduced here as a general principle ruling the whole regulation of the system of governance which means that all provisions on system of governance should be interpreted according to the nature, scale and complexity of the operations of the insurance undertakings. If an InsurTech is small or medium-sized, or if its business is relatively simple and straightforward, a less sophisticated governance system should be sufficient (
Van Hulle 2019, p. 400). What is meant by a less sophisticated governance system must be of course specified individually. I will, however, present issues which may be common for many InsurTechs, taking as an example an InsurTech startup with an innovative technology-led business model wishing to enter the EU insurance market. First, Solvency II Directive introduces a requirement that an undertaking must organize at least four key governance functions: risk management, internal control, internal audit and actuarial (Articles 44, 46, 47, 48 of Solvency II) where each function is operationally independent (Article 268(1) of Commission Delegated Regulation (EU) 2015/35 of 10 October 2014 (Delegated Regulation)). Establishment of four independent functions was proved to be burdensome for small and less complex undertakings, such as (re-)insurance captives, which for their size tend to outsource most of the functions (
AON 2011, p. 3). This may be the case of most of the small-sized companies or companies that are entering the market, including InsurTech startups. The principle of proportionality helps to ease this burden by allowing the insurance undertakings to outsource the key functions (Article 49 of Solvency II Directive) or to combine them (recital 32 of Solvency II Directive). If the functions are combined, it should be ensured that the conflicts of interests are avoided, and the judgement is independent. One key function that, in principle, cannot be combined with other functions is the internal audit function (Article 271(1) of Delegated Regulation). Article 271(2) of Delegated Regulation provides however for a very narrow exclusion to this prohibition, according to which a person carrying out the internal audit function may also carry out other key functions if (i) this is appropriate with respect to the nature, scale and complexity of the risks inherent in the undertaking’s business and (ii) no conflict of interest arises for the person carrying out the internal audit function and (iii) the costs of maintaining person for the internal audit function that do not carry out other key functions would impose costs on the undertaking that would be disproportionate with respect to the total administrative expenses. EIOPA further specifies what is meant by this exclusion and states that the performance of the internal audit function by the same person or persons which perform the compliance, risk management or actuarial function is only possible where the undertaking has a risk profile that does not entail large or complex risks, i.e., where the undertaking only writes standard lines of business on a limited scale and where the undertaking is not invested in complex investment products (
EIOPA 2015b, p. 83). If this description corresponds with an InsurTech startup’s risk profile, it would be justified for that InsurTech to apply the exclusion. In such a case, the InsurTech would need to be able to demonstrate to the supervisory authority, on request, that the conflicts of interest are properly dealt with and no concerns remain that the objectivity and independence of the internal audit function is compromised (
EIOPA 2015b, p. 83). If combination of functions is not an option, it is also possible to outsource them. In principle, there is no qualitative limitation to outsourcing, i.e., as to which functions or activities can be outsourced. Yet, if the outsourced function or activity is critical or considered important operational function, the outsourcing of such function cannot put at risk the InsurTech’s quality of governance, increase its operational risk, hinder the supervisory process or undermine the service to the policyholder (Article 49(2) of Solvency II Directive). The part of key activities or functions that must be retained in the InsurTech compared with tasks outsourced should be assessed having regard to the nature, scale and complexity of its business. Obviously, the InsurTech cannot outsource all its functions and activities. It must retain sufficient expertise and resources to monitor and manage its risks. The part of key activities and functions that the insurer retains must be such that the insurer will be in a position to resume direct control over an outsourced activity either by insourcing or through an alternative outsourcing arrangement (
Van Hulle 2019, p. 460). This must be assessed having regard to the nature, scale and complexity of the InsurTech.
The proportionality of the system of governance is also relevant where the InsurTechs use AI within their organization. In the recent EIOPA’s report, it is underlined that the governance measures that the insurance undertakings must implement (e.g., transparency and explainability policies, human oversight, data management) should be proportionate to the AI use case and its impact on both consumers and those insurance undertakings (
EIOPA 2021, pp. 8, 17). To help InsurTech assess the impact and justify the choice of the governance measures, the report suggests following the AI use case impact assessment which determines the impact by the potential harm caused by the use of AI to an individual and to the insurance undertaking (
EIOPA 2021, p. 18). If, according to the impact assessment, a concrete AI use case has low impact, there is no need for the InsurTech to implement sophisticated measures but instead, they can be limited to the minimum required.
Besides the system of governance, proportionality is also instrumental for the supervisory reporting duties. The regular reporting obligations include the Solvency and Financial Condition Report, the regular supervisory report, Own Risk and Solvency Assessment and annual and quarterly quantitative report templates (Article 304(1) of the Delegated Regulation). Submission of these reports is obligatory and the frequency of reporting varies from quarterly to at least every three years. Both big-sized and small-sized insurance undertakings complain that the supervisory reporting in its current form is unnecessarily costly for its intended purposes and often overlaps with other disclosure requirements (
European Commission 2018, pp. 7, 10). If the issue is raised by experienced big-sized insurers, most likely it will also be a challenge for a small-sized InsurTech startup. The principle of proportionality may help to minimize the burden of the reporting in at least two ways. First, instead of submitting annual and quarterly report templates, the InsurTech could limit the reporting duties to the annual quantitative templates only if proves the following: (i) the submission of quarterly information is overly burdensome in relation to the nature, scale and complexity of the risks inherent in its business and (ii) the quarterly information is reported at least annually (Article 35(6) of Solvency II Directive). Second, NSA may limit regular supervisory reporting or exempt the InsurTech from reporting on an item-by-item basis, where (i) the submission of that information would be overly burdensome in relation to the nature, scale and complexity of the risks inherent in its business, (ii) the submission of that information is not necessary for the effective supervision of the InsurTech, (iii) the exemption does not undermine the stability of the financial systems concerned in the EU and (iv) the InsurTech is able to provide the information on an ad-hoc basis (Article 35(7) of Solvency II Directive). Although in both cases, the limitation of the reporting duties depends on the prior approval of the NSA, it is worth noticing that the small-sized InsurTechs should be prioritized when determining the eligibility of the undertakings for those exemptions (Article 35(6) of Solvency II Directive).
As seen in the above examples, the principle of proportionality does offer a general possibility to adjust the Solvency II framework to the InsurTech specificity (particularly size of the business and the use of IA). Each time the InsurTech would wish to apply proportionality, it will be key to specify its risk profile and, most importantly, if (and how) the innovative business models and the technology used by that InsurTech affect the risk profile. Do certain business models increase or decrease the risk of insolvency? Does the technology used by InsurTech companies expose the policyholders to higher risks or provides greater safety? For instance, the risk mitigation techniques applied within the peer-to-peer arrangements or application of the technology that allows for controlling the risk may decrease the overall complexity of the risks inherent to the business. In turn, if the InsurTech adopts new technologies or innovates processes or products where they represent the supervisory concerns mentioned earlier, it would perhaps increase the complexity and therefore the InsurTech should make sure that the appropriate internal control or security measures are in place.
Although, technically, proportionality enables to adjust the regulation to the specificity of the InsurTech companies, it should be underlined that the history of the principle in the insurance industry shows that the mere fact the principle exists is not enough. Namely, the practical application of proportionality revealed to be too troublesome both for the NSAs and the insurance companies. It is complained that the proportionality is not applied to its fullest extent or is not applied at all (
Batten and Di Capua 2020;
Insurance Europe 2018;
Insurance Europe and AMICE 2019) which leads to the situation where in fact ‘one-size-fits-all’ approach persists. It should be stressed, however, that the criticism does not question proportionality as such. The principle is commonly recognized as
indispensable to apply the EU regulatory framework (see e.g.,
Insurance Europe 2018, p. 3;
ECIROA 2008, p. 5). Rather, the criticism focuses on the procedural aspects of the application of proportionality.
The insufficient and inconsistent application of the principle is a general problem, however, it may be particularly damaging to innovative business models. Based on experiences in the German and French markets, the InsurTech companies faced the difficulties relating to licensing exactly for this reason (
Insurance Europe 2018, p. 1). The principle of proportionality is now being revised within the Solvency II review and different ways to improve its application and supervision are being analyzed. The accounts are also taken of the InsurTechs needs and interests (the proportionality toolbox suggested by the Dutch Association of Insurers facilitates activity of small and medium-sized insurers as well as InsurTechs (see
Dutch Association of Insurers and Insurance Ireland 2019, p. 3).
4.3.2. Proportionality in IDD Insurance Distribution
Since most of the InsurTech companies are active in the insurance intermediation area, the conduciveness of the regulation on the insurance distribution is particularly important in terms of the InsurTech regulation. Meanwhile, the Geneva Association survey shows that the insurance distribution regulation is considered a barrier by 44% of respondents, including Germany (
The Geneva Association 2021, p. 12) (IDD Directive is also claimed to be burdensome by Insurance Europe (see
Insurance Europe 2021, p.10)).
IDD Directive follows the suit of Solvency II and implements the principle of proportionality to accommodate different insurance distributors and thereby create a level playing field (Marano, p. 6). Here, however, proportionality refers not only to the risk profile of an undertaking (recital 23 of IDD Directive) but primarily to the activities performed, the nature of the insurance products sold and the nature of the distributor (Article 25(2) of IDD).
The intensity of the regulation is adjusted to the activities performed, nature of the products offered and type of the distributor. The intensity of supervision is additionally adjusted to the nature, scale and complexity of the risks inherent in the business of a particular distributor. There are no general guidelines on how to calibrate specific requirements to the activities performed, nature of the products offered or type of the distributor. Occasionally, EIOPA explains what impactful elements are considered when assessing proportionality of individual requirements. For example, with respect to the product oversight and governance, the NSAs should consider whether the distribution activity is the principal professional activity or an ancillary activity, whether the distributor is acting as a tied agent or an independent broker (type of the distributor) (
EIOPA 2020, p. 7), manufacturers’ business model, activities pursued (designing and manufacturing of insurance products and/or distribution of insurance products) and kinds of product offered (their complexity), distribution and outsourcing arrangements, characteristics of the different target markets (
EIOPA 2020, p. 8).
Similarly to Solvency II Directive, there seems to be nothing against application of proportionality to the InsurTech companies. Quite the opposite, in fact. The element to which the regulation should be adjusted are so broad and generic that they can embrace the specifics of InsurTech. Again, however, what may be problematic is the practical application of proportionality. Besides, the uncertainty about how to calibrate a requirement to e.g., complexity of the product sold, application of proportionality is virtually impossible. This is because some of the requirements set out by IDD Directive are rule-based and leave no room for the proportional adjustment. The problem regards e.g., Article 23 of IDD Directive which imposes obligation to provide the relevant information to the customer on paper. The industry argues that the InsurTechs should be exempted from this obligation. However, nonapplication of the obligation cannot be justified by the application of proportionality. This is because according to the idea behind the principle of proportionality, proportionality can never lead to the non-application of a requirement (
Van Hulle 2019, p. 172). It is explained that because all the measures (requirements) are appropriate and necessary, if application of proportionality allowed for nonapplication of a requirement, it would question its necessity. On a separate note, it is interesting to notice here that the principle of proportionality in the bank regulation slightly differs in this respect. Namely, proportionality applied in the bank regulation allows to apply certain regulations only to those institutions which are relevant to the issue being addressed by those regulations (e.g., a regulation intended to be addressed to systemically significant banking institutions which at the same time should not be applied to other institutions which are not deemed to be systemically significant). As a result, proportionality allows to waive certain rules, rather than apply them in a simplified or less prescriptive way, whenever an institution is only marginally exposed to the risks that those rules are designed to control (
EBA Banking Stakeholder Group 2015, p. 29). Perhaps the same concept transposed to the insurance regulation could address the problem of the default paper requirements.