Next Article in Journal
Kinetic Parameter Determination for Depolymerization of Biomass by Inverse Modeling and Metaheuristics
Next Article in Special Issue
Special Issue on “Energy, Economy and Environment for Industrial Production Processes”
Previous Article in Journal
Preparation and Characterization of Cinnamomum Essential Oil–Chitosan Nanocomposites: Physical, Structural, and Antioxidant Activities
Previous Article in Special Issue
Novel Concept of Cogeneration-Integrated Heat Pump-Assisted Fractionation of Alkylation Reactor Effluent for Increased Power Production and Overall CO2 Emissions Decrease
 
 
Correction to Processes 2019, 7(1), 7.
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Formation Mechanism of Trailing Oil in Product Oil Pipeline. Processes 2019, 7, 7

Petroleum Engineering School, Southwest Petroleum University, Chengdu 610500, China
*
Author to whom correspondence should be addressed.
Processes 2020, 8(7), 835; https://doi.org/10.3390/pr8070835
Submission received: 1 June 2020 / Accepted: 28 June 2020 / Published: 13 July 2020
(This article belongs to the Special Issue Energy, Economic and Environment for Industrial Production Processes)
We were not aware of some errors made in the proofreading phase; therefore, we wish to make the following corrections to the mathematical equations in the text in [1].
(1)
Figure 14 shows that the volume fraction of gasoline at 6 s to 9 s was less than 1%. The distance between the two interfaces with 99% and 1% forward batch concentration is defined as the length of the contamination. Equation (9) can be modified to yield
C = 9 [ 0.21 ln ( N ) + 0.96 ] V
(2)
When the Reynolds number was larger than the critical Reynolds number of contamination, the formula for calculating the contamination length is
C = 11.75 d 0.5 L 0.5 Re 0.1 + 9 [ 0.21 ln ( N ) + 0.96 ] V

References

  1. Liu, E.; Li, W.; Cai, H.; Peng, S. Formation mechanism of trailing oil in product oil pipeline. Processes 2019, 7, 7. [Google Scholar] [CrossRef] [Green Version]

Share and Cite

MDPI and ACS Style

Liu, E.; Li, W.; Cai, H.; Peng, S. Correction: Formation Mechanism of Trailing Oil in Product Oil Pipeline. Processes 2019, 7, 7. Processes 2020, 8, 835. https://doi.org/10.3390/pr8070835

AMA Style

Liu E, Li W, Cai H, Peng S. Correction: Formation Mechanism of Trailing Oil in Product Oil Pipeline. Processes 2019, 7, 7. Processes. 2020; 8(7):835. https://doi.org/10.3390/pr8070835

Chicago/Turabian Style

Liu, Enbin, Wensheng Li, Hongjun Cai, and Shanbi Peng. 2020. "Correction: Formation Mechanism of Trailing Oil in Product Oil Pipeline. Processes 2019, 7, 7" Processes 8, no. 7: 835. https://doi.org/10.3390/pr8070835

APA Style

Liu, E., Li, W., Cai, H., & Peng, S. (2020). Correction: Formation Mechanism of Trailing Oil in Product Oil Pipeline. Processes 2019, 7, 7. Processes, 8(7), 835. https://doi.org/10.3390/pr8070835

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop