Next Article in Journal
Efficient Removal of Azlocillin Sodium from Water by Polystyrene Anion Exchange Resin Supported MIL-53
Next Article in Special Issue
Green Chemistry: From Wastes to Value-Added Products
Previous Article in Journal
Towards Computationally Guided Design and Engineering of a Neisseria meningitidis Serogroup W Capsule Polymerase with Altered Substrate Specificity
Previous Article in Special Issue
Microbial Fuel Cell for Energy Production, Nutrient Removal and Recovery from Wastewater: A Review
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Processes
Volume 9
Issue 12
10.3390/pr9122194
processes-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation

by
Chikashi Sato
1,*,
N. Evelin Paucar
1,
Steve Chiu
1,
Muhammad Z. I. M. Mahmud
1 and
John Dudgeon
2
1
Department of Civil and Environmental Engineering, Idaho State University, 921 South 8th Avenue, Stop 8060, Pocatello, ID 83209, USA
2
Department of Anthropology, Idaho State University, 921 South 8th Avenue, Stop 8060, Pocatello, ID 83209, USA
*
Author to whom correspondence should be addressed.
Processes 2021, 9(12), 2194; https://doi.org/10.3390/pr9122194
Submission received: 30 September 2021 / Revised: 29 November 2021 / Accepted: 3 December 2021 / Published: 6 December 2021
(This article belongs to the Special Issue Green Chemistry: From Wastes to Value-Added Products)
Browse Figures
Versions Notes

Abstract

:
In this study, three single-chamber microbial fuel cells (MFCs), each having Pt-coated carbon cloth as a cathode and four bamboo charcoal (BC) plates as an anode, were run in a fed-batch mode, individually and in series. Simulated potato-processing wastewater was used as a substrate for supporting the growth of a mixed bacterial culture. The maximum power output increased from 0.386 mW with one MFC to 1.047 mW with three MFCs connected in series. The maximum power density, however, decreased from 576 mW/m2 (normalized to the cathode area) with one MFC to 520 mW/m2 with three MFCs in series. The experimental results showed that power can be increased by connecting the MFCs in series; however, choosing low resistance BC is crucial for increasing power density.

1. Introduction

Microbial fuel cells (MFCs) are bio-electrochemical devices capable of directly converting chemical energy to electrical energy using microorganisms as a catalyst [1,2,3,4,5]. This ability has been explored to generate electricity using wastewater as an energy source, while simultaneously treating wastewater [6,7,8,9,10,11].
MFCs are fundamentally classified into dual-chamber (or two-chamber) and single-chamber MFCs. The dual-chamber MFC consists of an anode chamber and cathode chamber. The anode chamber contains an anode electrode, microorganisms (biocatalysts), and anolyte (substrate, fuel source), while the cathode chamber houses a cathode electrode and catholyte. The two chambers are interfaced by a cation-specific or proton exchange membrane (PEM), and connected with an external circuit (conductive wire). In the single-chamber MFC design, the cathode chamber, catholyte, and PEM are removed, and one side of the cathode is directly exposed to oxidants, usually to the atmosphere (air cathode), and the other side to the anolyte. The air cathode allows oxygen (O2) in the air to contact with protons (H+) to form water (H2O) at the cathode surface. The present study used the single-chamber air-cathode MFC, as it has several advantages over the dual-chamber MFC, including (i) reduced total MFC volume, (ii) reduced internal resistance, (iii) simpler operation and maintenance, (iv) lower construction costs, and (v) an enhanced O2 reduction rate on the cathode owing to freely available O2 in the air [12,13,14,15]. Although considerable progress and advancement has been made in recent years, the MFC performance is still insufficient for large-scale industrial applications.
Electrodes are key MFC components that have been heavily investigated to improve the performance and reduce manufacturing cost with the aim of scaling up of MFC systems [16]. Typically, conventional carbon-based materials, including graphite, carbon cloth, carbon felt, and carbon brush, are widely used for an anode as they can provide good biocompatibility [17]. Graphite has been used in various forms, including plates [18], paper [19], rods [6,20,21], foil [21], granules [22,23,24], particles [25], woven form [26], felt [27,28,29], foam [20], fiber [30], and fiber brush [31]. Other carbon-based materials that have been used in MFCs are carbon cloth [8,32,33,34,35,36,37,38], carbon felt [39,40], carbon paper ([7,21,41,42,43,44,45,46,47,48,49], carbonized cardboard [50,51,52,53,54], carbon rod [21], carbon mesh [55,56], carbon fiber veil [21], granular-activated carbon [57,58], biochar [57,59], reticulated vitreous carbon [60,61], graphene [19,62,63], carbon nanotubes [64,65], and bamboo charcoal [66,67].
Among many factors, the oxidation of substrate and transferring electrons to the anode by electroactive bacteria (EAB) have been conceived as the main rate-limiting steps [15,68]. To improve interactions between the EAB and anode surface, the electrodes were frequently prepared by various physical and/or chemical treatments that require laborious procedures. Examples of modified carbon materials that have been explored include graphite incorporated with manganese ion [26], carbon paper with coatings of vapor-deposited iron oxide [69], graphite with electrodeposition of platinum black, coated with polymer [70,71], heat-treated carbon cloth [10], ammonia-treated carbon cloth [34], polypyrrole-coated carbon [72], carbon felts doped with quinone derivatives [73], carbon nanofiber nonwovens [74], gold-sputtered carbon paper [75], and bamboo charcoal doped with ammonium phosphate [76]. The present study employed bamboo charcoal as an anode without treatment. It is desirable to use carbonized materials without chemical treatment because the effectiveness of chemically treated electrodes is likely short-lived, the treatment procedures are laborious and costly, and disposal of waste chemicals is burdensome. Although a multitude of carbon-based anode materials has been investigated, only a few studies have used bamboo charcoal as electrodes.

2. Materials and Methods

2.1. MFC Design and Construction

Three air-cathode single-chamber MFCs, namely MFC 1, MFC 2, and MFC 3, were constructed and operated in a fed-batch cyclic mode. Specifically, the body of each MFC was constructed using acrylic sheets (0.6 cm thickness), which were cut and fastened together (Figure 1a). The outside dimension of each fuel cell is 13 cm long, 9 cm wide, and 11 cm in height. The top and cathode side covers can be detached from the main body so that the MFC can be cleaned and the cathode can be replaced when needed. Two holes were tapped on the top of the MFC to allow for the removal of a spent substrate solution and the feeding of a fresh solution. These holes were obturated during the operation to maintain an anaerobic condition.
In order to expose the cathode to the atmosphere, a circular opening (3 cm diameter) was drilled into the acrylic sheet that holds the cathode. The cathode electrode was made of carbon cloth with platinum loadings of 0.3 mg/cm2 (Fuel Cell Earth, Woburn, MA, USA). The apparent surface area (one side) of the cathode was 6.7 cm2.
The anode electrode was made of bamboo charcoal (Mt Meru Pte, Singapore). Four plates of bamboo charcoal, namely BC1, BC2, BC3, and BC4, were placed as the anode inside the MFC body (Figure 1b). The BC plates were spaced 2 cm from each other, and the distance between the cathode and the nearest BC plate was 3 cm. Specifications of the BC anode plates are presented in Table S1, as supporting information. These BC plates were selected among the BC plates of different resistances on the basis of low resistance. The BC surface was visualized using a scanning electron microscope (SEM) (Quanta 200 FEG, FEI Co., Czech Republic). The apparent (geometric) surface area of each BC anode plate was typically 75 cm2 ranging from 64 to 81 cm2, and the lengthwise and widthwise resistance of the BC anode plates was 30 Ω on average in a range from 16 to 54 Ω. The average resistance of the BC electrodes of MFC 1, MFC 2, and MFC 3 were 26, 24, and 40 Ω, respectively. A stainless-steel wire lead was attached to each electrode using conductive epoxy adhesive (MG Chemicals, Ontario, Canada), and its surface was covered by nonconductive epoxy putty (J-B Weld, Coopersburg, PA, USA) for reinforcement. For each BC anode plate, a hole was drilled in the bottom of the MFC to allow the wire leads to pass through the bottom sheet to connect the electrodes externally. The anode and the cathode were connected through an external resistor to close the circuit. After the installation of the BC anode plates, the working volumes (or anolyte volumes) of MFC-1, MFC-2, and MFC-3 were 530, 530, and 500 mL, respectively.

2.2. Experimental Conditions and Analyses

Simulated potato-processing wastewater was used as a substrate (anolyte). To prepare the wastewater, concentrated potato extract obtained from a local food processing plant in Idaho Falls, Idaho, USA, was diluted to the desired concentration (approximately 1000 mg/L) of chemical oxygen demand (COD) using a pH-7 phosphate buffer solution. The potato extract was analyzed by ICP-MS (X-Series II, Thermo Scientific, Germany), and results are presented in Table S2, as supporting information. The wastewater was autoclaved at 121 °C for 20 min to assure that the substrate was free from active microbes, and stored in a refrigerator at 4 °C until used.
The bacterial culture used in this study originated from an anaerobic digester at the Wastewater Treatment Plant in the City of Pocatello, Idaho. The anaerobic mixed bacterial community was acclimated in sterilized synthetic potato-processing wastewater for more than 10 years by the feeding aforementioned sterilized substrate every two weeks to a month, and thus the inoculum was considered to be fully acclimated. The previous study revealed that microbial species present in the anode chamber were predominantly within the phyla of Proteobacteria, Firmicutes, and Bacteroidetes [77].
The organic strength of the wastewater (substrate solution) was measured as COD at the beginning and end of the run cycle. The loss of anolyte (wastewater) in the chamber was compensated by filling deionized water before taking samples. The COD measurement was carried out using the USEPA Reactor Digestion Method (HACH, USA). Wastewater samples were filtered using a 0.2 µm Millex-VV filter (Millipore, France) before the COD analysis. The removal efficiency of individual MFC was approximately 80% in one cycle run.

2.3. MFC Operation and Monitoring

The MFCs were run with five different settings: (1) MFC 1 only; (2) MFC 2 only; (3) MFC 3 only; (4) MFC 1 and MFC 2 in-series (noted as MFC 1-2), and (5) MFC 1, MFC 2, and MFC 3 in-series (noted as MFC 1-2-3). The MFCs were operated in a fed-batch mode at 30 ± 2 °C. The MFCs were considered to have reached a quasi-steady state when a stable voltage cycle was achieved, i.e., the MFCs produced similar voltage profiles and repeated at least three cycles. When the system reached a stable condition and voltage reached a high plateau region, the external resistance in the circuit was varied in a range from 20 to 800 Ω to obtain the maximum power output.
The voltage produced by the MFCs was measured using a data acquisition system (DAS) and continuously recorded every 15 min. The DAS consisted of a computer equipped with a data acquisition board (PCl-6024E, National Instrument, Austin, TX, USA) and an external connection block (SCB-6024E, National Instrument). The DAS was controlled by LabView-2014 (National Instruments, Austin, TX, USA). The potential difference between the cathode (+) and anode (−) is voltage (V) across a resistor (R). Current (I) was calculated from Ohm’s law: I = V/R. Power (P) was calculated by P = I·V or P = V2/R. To analyze the performance of MFC, power density and polarization curves were developed. Current and power densities were normalized to the cathode area, anode area, and effective chamber (anolyte) volume. The vales of internal resistance were determined according to the maximum power transfer theorem [78].

3. Results and Discussion

3.1. Bamboo Charcoal Anode

As was described previously, a large variety of carbon materials have been studied for anode electrodes to improve MFC performance. The present study used bamboo charcoal (BC) for the anode. In the MFC design, electrodes are desired to have the following characteristics: (i) high electrical conductivity and low resistance; (ii) high mechanical strength; (iii) strong biocompatibility, (iv) high chemical stability and corrosion resistance, (v) large surface area, (vi) low cost, and vii) environmental friendliness [1]. Bamboo charcoal meets most of the aforementioned characteristics [66,67,76,79,80,81,82,83,84,85,86,87,88]. Figure 2 shows SEM images of the external surface and cross-section of the BC anode. The electron micrographs show that the BC used in this study has a rough fiber-like external surface (Figure 2a) and is comprised of dense round to hexagonal tubes from 20 to 500 µm in diameter, arranged in a honeycomb-like pattern (Figure 2b). The interconnected porous architecture can provide a large surface area for microbial cell attachment and biofilm growth, and facilitates the diffusion of nutrients and protons. These characteristics are essential to the anode for high performance. The major drawback is that being a natural plant, the specifications of the BC such as the thickness and resistance can vary (Table S1). It should be noted that BC plates used in MFC 3 had noticeably larger resistances compared to those of MFC 1 and MFC 2.
In a study with BC and carbon fiber anodes, Moqsud et al. [67] found that bamboo charcoal was an effective anode material. A comparison of tubular BC with tubular graphite showed that BC was a better anode material in terms of surface roughness, biocompatibility, electron transfer, and total internal resistance [89]. Additional advantages of using bamboo charcoal are that bamboo is a fast-growing plant [90] and thus it sequesters CO2 rapidly from the atmosphere, stabilizing carbon in a solid form [91]. Bamboo charcoal can be easily manufactured at low cost and with minimal carbon footprint, reused, and disposed of safely (e.g., as biochar) as it is a natural material.

3.2. MFC Performance

The performance of MFCs is generally expressed in either power output or power density normalized to the cathode area, anode area, or effective anode chamber (or anolyte) volume. Preliminary examinations of the MFC 1, MFC 2, and MFC 3 runs in the present study showed that these four expressions are comparable (see Figure S1, supporting information). Hence, in this paper, the power density and current density were normalized to the projected cathode area. Note that all the MFCs used in this study had the same cathode area (6.7 × 10−4 m2).
The experimental results are analyzed in two stages. Firstly, the performance of MFC 1, MFC 2, and MFC 3 are analyzed individually. Figure 3a shows plots of power (mW) against corresponding current density (mA/m2) for MFC1 (circles), MFC 2 (squares), and MFC 3 (triangles). Lines are third-order polynomial fits to guide the eyes. As is seen, MFC 1 and MFC 2 produced similar power curves, while MFC 3 exhibited a considerably smaller power curve. The maximum power achieved by MFC 1 and MFC 2 is 0.386 and 0.383 mW at a current density of 3.27 × 103 and 2.67 × 103 mA/m2, respectively. The maximum power yielded by MFC 3 is 0.284 mW at a current density of 2.09 × 103 mA/m2. The trends of polarization for MFC 1, MFC 2, and MFC 3 are shown in Figure 3b. The polarization curves produced by MFC 1 and MFC 2 are nearly identical, whereas the voltage produced by MFC 3 is noticeably smaller, consistent with the power curves. This smaller voltage produced by MFC 3 is most likely attributed to the larger internal resistance of MFC 3.
Figure 4 shows the correlation between current (at the maximum power) and internal resistance. As is seen, current and internal resistance are inversely related. In a comparison of MFC 1 and MFC 3, a 51% increase in internal resistance resulted in a 28% decrease in current.
Secondly, the performance of the MFCs connected in series is examined. Figure 5a shows the power curves for MFC 1 (circle), MFC 1-2 (square), and MFC 1-2-3 (triangle). As the number of the MFCs was increased, the power output increased, and the maximum power shifted to the lower current density and larger voltage (Figure 5b). The maximum power output increased from 0.386 mW (at 3.27 × 103 mA/m2), 0.875 mW (at 1.75 × 103 mA/m2) to 1.047 mW (at 1.14 × 103 mA/m2) with the MFC 1, MFC 1-2, and MFC 1-2-3 settings, respectively. The increase of the power output from the MFC 1 to MFC 1-2 setting was 120%, whereas the power increase from the MFC 1-2 setting to the MFC 1-2-3 setting was only 20%. This smaller power increase in the MFC 1-2-3 setting is most likely attributed to the larger internal resistance of MFC 3. Theoretically, if two MFCs are connected in series, the system can increase the power output by increasing the voltage without increasing the current (92). However, MFC 1-2 produced approximately 15% less voltage than the theoretically available voltage, whereas it produced about 35% more current than the theoretical current. Overall, MFC 1-2 produced more than 20% greater power than the theoretical additive power. The decrease in the voltage is likely due to voltage reversal (VR), as this is a common phenomenon in stacked MFCs and MFCs in series [92]. The potential causes of VR are (a) kinetic imbalances between the MFCs in series [93], and (b) substrate limitation from microbial starving conditions [23,94]. Several VR control methods have been discussed and proposed by Kim et al. [92]. The increase in the current could be attributed to the properties of BC or the arrangement of the BC plates. A slightly super-linear increase in power output by stacking individual MFC units has been reported [95]. Nevertheless, the effects of the BC material and multiple BC plates on the MFC performance require further investigation.
Figure 6 shows the power density curves (mW/m2) for the MFC 1, MFC 1-2, and MFC 1-2-3 settings. As is seen, the power density increased from the MFC 1 to the MFC 1-2 setting but decreased in the MFC 1-2-3 setting. Although the power output was increased by adding MFCs in series, the increase in power by MFC 3 was not large enough to offset the increase in the cathode area. The cathode area increased from 6.7 × 10−4 m2 to 1.34 × 10−3 m2 to 2.01 × 10−3 m2 in the MFC 1, MFC 1-2, and MFC 1-2-3 runs, respectively. Consequently, MFC 1-2-3 exhibited the lowest power density (520 mW/m2 cathode at 1.14 × 103 mA/m2) as compared to MFC 1 (576 mW/m2 at 3.27 × 103 mA/m2) and MFC 1-2 (653 mW/m2 at 1.75 × 103 mA/m2). The results indicate that the power output increases with an increasing number of MFCs in-series; however, the MFC that behaves poorly affects negatively the overall performance of the MFC system.
One of the factors that limit power output by MFCs is their internal resistance, which is comprised of activation (or charge transfer) resistance, ohmic (or solution) resistance, and concentration (or diffusion) resistance [96]. The ohmic resistance represents the resistance of solution, electrode materials, and membrane. In a single-chamber air-cathode MFC, the sources of ohmic resistance are mainly the electrodes and anolyte. Figure 7 shows the relation between the internal resistance and BC plate resistance. Note that the BC anode resistances were measured before they were placed inside the MFC chamber. As is seen, the internal resistance was smaller than the BC anode resistance, indicating that the BC plates became more conductive, likely due to the establishment of EAB biofilm.

4. Conclusions

This study focused on the single-chamber air-cathode MFCs with the bamboo charcoal (BC) anode and Pt-coated carbon cloth cathode. Three MFCs were run in a fed-batch mode, individually and in series using synthetic potato-processing wastewater as an anolyte. The maximum power output increased from 0.386 mW (at 3.27 × 103 mA/m2) with one MFC to 1.047 mW (at 1.14 × 103 mA/m2) with three MFCs connected in series. The maximum power density, however, decreased from 576 mW/m2 (at 3.27 × 103 mA/m2) with one MFC to 520 mW/m2 cathode (at 1.14 × 103 mA/m2) with three MFCs in series. The experimental results showed that power can be increased by connecting MFCs in series; however, choosing high-quality (low resistance) BC charcoal is crucial for increasing power density.

Supplementary Materials

The following are available online at https://www.mdpi.com/article/10.3390/pr9122194/s1: Table S1: Dimensions and resistance of bamboo charcoal analysis; Table S2: Concentrations of inorganic constituents in potato extracts (ICP analysis results); Figure S1: Power and power density curves for MFC 1: (a) power; (b) power density normalized to the cathode area; (c) anode area, and (d) anolyte volume.

Author Contributions

Conceptualization, C.S.; methodology, C.S., N.E.P., M.Z.I.M.M. and J.D.; validation, C.S.; formal analysis, C.S.; investigation, C.S., N.E.P., S.C., M.Z.I.M.M. and J.D.; resources, C.S. and S.C.; data curation, C.S. and M.Z.I.M.M.; writing—original draft preparation, C.S.; writing—review and editing, C.S. and N.E.P.; visualization, C.S.; supervision, C.S. and S.C.; project administration, C.S. and S.C.; funding acquisition, C.S. and S.C. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available on request from the corresponding author. The data are not publicly available due to potential proprietary information.

Acknowledgments

The authors would like to express their sincere appreciation to the College of Science and Engineering at Idaho State University for their support.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Logan, B.E.; Hamelers, B.; Rozendal, R.; Schröder, U.; Keller, J.; Freguia, S.; Aelterman, P.; Verstraete, W.; Rabaey, K. Microbial fuel cells: Methodology and technology. Environ. Sci. Technol. 2006, 40, 5181–5192. [Google Scholar] [CrossRef] [PubMed]
  2. Rahimnejad, M.; Ghoreyshi, A.A.; Najafpour, G.D.; Younesi, H.; Shakeri, M. A novel microbial fuel cell stack for continuous production of clean energy. Int. J. Hydrogen Energy 2012, 37, 5992–6000. [Google Scholar] [CrossRef]
  3. Oon, Y.L.; Ong, S.A.; Ho, L.N.; Wong, Y.S.; Oon, Y.S.; Lehl, H.K.; Thung, W.E. Hybrid system up-flow constructed wetland integrated with microbial fuel cell for simultaneous wastewater treatment and electricity generation. Bioresour. Technol. 2015, 186, 270–275. [Google Scholar] [CrossRef]
  4. Callegari, A.; Cecconet, D.; Molognoni, D.; Capodaglio, A.G. Sustainable processing of dairy wastewater: Long-term pilot application of a bio-electrochemical system. J. Clean. Prod. 2018, 189, 563–569. [Google Scholar] [CrossRef]
  5. Ye, Y.; Ngo, H.H.; Guo, W.; Chang, S.W.; Nguyen, D.D.; Liu, Y.; Nghiem, L.D.; Zhang, X.; Wang, J. Effect of organic loading rate on the recovery of nutrients and energy in a dual-chamber microbial fuel cell. Bioresour. Technol. 2019, 281, 367–373. [Google Scholar] [CrossRef] [PubMed]
  6. Liu, H.; Ramnarayanan, R.; Logan, B.E. Production of electricity during wastewater treatment using a single chamber microbial fuel cell. Environ. Sci. Technol. 2004, 38, 2281–2285. [Google Scholar] [CrossRef]
  7. Oh, S.; Logan, B.E. Hydrogen and electricity production from a food processing wastewater using fermentation and microbial fuel cell technologies. Water Res. 2005, 39, 4673–4682. [Google Scholar] [CrossRef] [PubMed]
  8. Cheng, S.; Liu, H.; Logan, B.E. Increased performance of single-chamber microbial fuel cells using an improved cathode structure. Electrochem. Commun. 2006, 8, 489–494. [Google Scholar] [CrossRef]
  9. Ahn, Y.; Logan, B.E. Effectiveness of domestic wastewater treatment using microbial fuel cells at ambient and mesophilic temperatures. Bioresour. Technol. 2010, 101, 469–475. [Google Scholar] [CrossRef] [PubMed]
  10. Liu, G.; Yates, M.D.; Cheng, S.; Call, D.F.; Sun, D.; Logan, B.E. Examination of microbial fuel cell start-up times with domestic wastewater and additional amendments. Bioresour. Technol. 2011, 102, 7301–7306. [Google Scholar] [CrossRef] [PubMed]
  11. Oliveira, V.B.; Simões, M.; Melo, L.F.; Pinto, A.M.F.R. A 1D mathematical model for a microbial fuel cell. Energy 2013, 61, 463–471. [Google Scholar] [CrossRef]
  12. Ou, S.; Kashima, H.; Aaron, D.S.; Regan, J.M.; Mench, M.M. Multi-variable mathematical models for the air-cathode microbial fuel cell system. J. Power Sources 2016, 314, 49–57. [Google Scholar] [CrossRef] [Green Version]
  13. Singh, S.; Modi, A.; Verma, N. Enhanced power generation using a novel polymer-coated nanoparticles dispersed-carbon micro-nanofibers-based air-cathode in a membrane-less single chamber microbial fuel cell. Int. J. Hydrogen Energy 2016, 41, 1237–1247. [Google Scholar] [CrossRef]
  14. Li, M.; Zhang, H.G.; Xiao, T.F.; Zhang, B.P.; Yan, J.; Chen, D.Y.; Chen, Y.H. Rose flower-like nitrogen-doped NiCo2O4/carbon used as cathode electrocatalyst for oxygen reduction in air cathode microbial fuel cell. Electrochim. Acta 2017, 258, 1219–1227. [Google Scholar] [CrossRef]
  15. Geetanjali, R.; Rani, R.; Kumar, S. Enhanced performance of a single chamber microbial fuel cell using NiWO4/reduced graphene oxide coated carbon cloth anode. Fuel Cells 2019, 19, 299–308. [Google Scholar] [CrossRef]
  16. Baudler, A.; Schmidt, I.; Langner, M.; Greiner, A.; Schroder, U. Does it have to be carbon? Metal anodes in microbial fuel cells and related bioelectrochemical systems. Energy Environ. Sci. 2015, 8, 2048–2055. [Google Scholar] [CrossRef] [Green Version]
  17. Liu, X.; Zhao, X.; Yu, Y.Y.; Wang, Y.Z.; Shi, Y.T.; Cheng, Q.W.; Fang, Z.; Yong, Y.C. Facile fabrication of conductive polyaniline nanoflower modified electrode and its application for microbial energy harvesting. Electrochim. Acta 2017, 255, 41–47. [Google Scholar] [CrossRef]
  18. Mohan, S.V.; Raghavulu, S.V.; Peri, D.; Sarma, P.N. Integrated function of microbial fuel cell (MFC) as bio-electrochemical treatment system associated with bioelectricity generation under higher substrate load. Biosens. Bioelectron. 2009, 24, 2021–2027. [Google Scholar] [CrossRef]
  19. Srikanth, S.; Marsili, E.; Flickinger, M.C.; Bond, D.R. Electrochemical characterization of Geobacter sulfurreducens cells immobilized on graphite paper electrodes. Biotechnol. Bioeng. 2008, 99, 1065–1073. [Google Scholar] [CrossRef]
  20. Chaudhuri, S.K.; Lovley, D.R. Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells. Nat. Biotech. 2003, 21, 1229–1232. [Google Scholar] [CrossRef]
  21. Liu, Y.; Harnisch, F.; Fricke, K.; Schröder, U.; Climent, V.; Feliu, J.M. The study of electrochemically active microbial biofilms on different carbon-based anode materials in microbial fuel cells. Biosens. Bioelectron. 2010, 25, 2167–2171. [Google Scholar] [CrossRef] [PubMed]
  22. Clauwaert, P.; Van Der Ha, D.; Boon, N.; Verbeken, K.; Verhaege, M.; Rabaey, K.; Verstraete, W. Open air biocathode enables effective electricity generation with microbial fuel cells. Environ. Sci. Technol. 2007, 41, 7564–7569. [Google Scholar] [CrossRef] [PubMed]
  23. Aelterman, P.; Rabaey, K.; Pham, H.T.; Boon, N.; Verstraete, W. Continuous electricity generation at high voltages and currents using stacked microbial fuel cells. Environ. Sci. Technol. 2006, 40, 3388–3394. [Google Scholar] [CrossRef]
  24. Ryu, J.H.; Lee, H.L.; Lee, Y.P.; Kim, T.S.; Kim, M.K.; Anh, D.T.N.; Tran, H.T.; Ahn, D.H. Simultaneous carbon and nitrogen removal from piggery wastewater using loop configuration microbial fuel cell. Process Biochem. 2013, 48, 1080–1085. [Google Scholar] [CrossRef]
  25. Sell, D.; Kraemer, P.; Kreysa, G. Use of an oxygen gas diffusion cathode and a three-dimensional packed bed anode in a bioelectrochemical fuel cell. Appl. Microbiol. Biotechnol. 1989, 31, 211–213. [Google Scholar] [CrossRef]
  26. Park, D.; Zeikus, J. Impact of electrode composition on electricity generation in a single-compartment fuel cell using Shewanella putrefaciens. Appl. Microbiol. Biotechnol. 2002, 59, 58–61. [Google Scholar]
  27. Kim, H.J.; Park, H.S.; Hyun, M.S.; Chang, I.S.; Kim, M.; Kim, B.H. A mediator-less microbial fuel cell using a metal reducing bacterium, Shewanella putrefaciens. Enzym. Microb. Technol. 2002, 30, 145–152. [Google Scholar] [CrossRef]
  28. Kim, B.H.; Park, H.S.; Kim, H.J.; Kim, G.T.; Chang, I.S.; Lee, J.; Phung, N.T. Enrichment of microbial community generating electricity using a fuel-cell-type electrochemical cell. Appl. Microbiol. Biotechnol. 2004, 63, 672–681. [Google Scholar] [CrossRef]
  29. An, J.; Kim, D.; Chun, Y.; Lee, S.J.; How, Y.N.G.; Chang, I.S. Floating-type microbial fuel cell (FT-MFC) for treating organic-contaminated water. Environ. Sci. Technol. 2009, 43, 1642–1647. [Google Scholar] [CrossRef] [PubMed]
  30. Wrighton, K.C.; Thrash, J.C.; Melnyk, R.A.; Bigi, J.P.; Byrne-Bailey, K.G.; Remis, J.P.; Schichnes, D.; Auer, M.; Chang, C.J.; Coates, J.D. Evidence for direct electron transfer by a gram-positive bacterium isolated from a microbial fuel cell. Appl. Environ. Microbiol. 2011, 77, 7633–7639. [Google Scholar] [CrossRef] [Green Version]
  31. Logan, B.; Cheng, S.; Watson, V.; Estadt, G. Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. Environ. Sci. Technol. 2007, 41, 3341–3346. [Google Scholar] [CrossRef]
  32. Cheng, S.; Liu, H.; Logan, B.E. Increased power generation in a continuous flow MFC with advective flow through the porous anode and reduced electrode spacing. Environ. Sci. Technol. 2006, 40, 2426–2432. [Google Scholar] [CrossRef]
  33. Cheng, S.; Liu, H.; Logan, B.E. Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (Nation and PTFE) in single chamber microbial fuel cells. Environ. Sci. Technol. 2006, 40, 364–369. [Google Scholar] [CrossRef] [PubMed]
  34. Cheng, S.; Logan, B.E. Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells. Electrochem. Commun. 2007, 9, 492–496. [Google Scholar] [CrossRef]
  35. Ishii, S.; Watanabe, K.; Yabuki, S.; Logan, B.E.; Sekiguchi, Y. Comparison of electrode reduction activities of Geobacter sulfurreducens and an enriched consortium in an air-cathode microbial fuel cell. Appl. Environ. Microbiol. 2008, 74, 7348–7355. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  36. Wang, X.; Feng, Y.J.; Lee, H. Electricity production from beer brewery wastewater using single chamber microbial fuel cell. Water Sci. Technol. 2008, 57, 1117–1121. [Google Scholar] [CrossRef]
  37. Feng, Y.; Wang, X.; Logan, B.E.; Lee, H. Brewery wastewater treatment using air-cathode microbial fuel cells. Appl. Microbiol. Biotechnol. 2008, 78, 873–880. [Google Scholar] [CrossRef]
  38. Martinez-Conesa, E.J.; Ortiz-Martinez, V.M.; Salar-Garcia, M.J.; De Los Rios, A.P.; Hernandez-Fernandez, F.J.; Lozano, L.J.; Godinez, C. A Box-Behnken design-based model for predicting power performance in microbial fuel cells using wastewater. Chem. Eng. Commun. 2017, 204, 97–104. [Google Scholar] [CrossRef]
  39. Chae, K.J.; Choi, M.J.; Lee, J.W.; Kim, K.Y.; Kim, I.S. Effect of different substrates on the performance, bacterial diversity, and bacterial viability in microbial fuelcells. Bioresour. Technol. 2009, 100, 3518–3525. [Google Scholar] [CrossRef]
  40. Massaglia, G.; Margaria, V.; Sacco, A.; Tommasi, T.; Pentassuglia, S.; Ahmed, D.; Mo, R.; Pirri, C.F.; Quaglio, M. In situ continuous current production from marine floating microbial fuel cells. Appl. Energy 2018, 230, 78–85. [Google Scholar] [CrossRef]
  41. Liu, H.; Logan, B.E. Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. Environ. Sci. Technol. 2004, 38, 4040–4046. [Google Scholar] [CrossRef]
  42. Kim, J.R.; Cheng, S.; Oh, S.E.; Logan, B.E. Power generation using different cation, anion, and ultrafiltration membranes in microbial fuel cells. Environ. Sci. Technol. 2007, 41, 1004–1009. [Google Scholar] [CrossRef]
  43. Kim, J.R.; Jung, S.H.; Regan, J.M.; Logan, B.E. Electricity generation and microbial community analysis of alcohol powered microbial fuel cells. Bioresour. Technol. 2007, 98, 2568–2577. [Google Scholar] [CrossRef]
  44. Lu, N.; Zhou, S.; Zhuang, L.; Zhang, J.; Ni, J. Electricity generation from starch processing wastewater using microbial fuel cell technology. Biochem. Eng. J. 2009, 43, 246–251. [Google Scholar] [CrossRef]
  45. Min, B.; Cheng, S.; Logan, B.E. Electricity generation using membrane and salt bridge microbial fuel cells. Water Res. 2005, 39, 1675–1686. [Google Scholar] [CrossRef]
  46. Min, B.; Kim, J.; Oh, S.; Regan, J.M.; Logan, B.E. Electricity generation from swine wastewater using microbial fuel cells. Water Res. 2005, 39, 4961–4968. [Google Scholar] [CrossRef]
  47. Min, B.; Logan, B.E. Continuous electricity generation from domestic wastewater and organic substrates in a flat plate microbial fuel cell. Environ. Sci. Technol. 2004, 38, 5809–5814. [Google Scholar] [CrossRef]
  48. Oh, S.E.; Logan, B.E. Proton exchange and electrode surface areas as factors that affect power generation in microbial fuel cells. Appl. Microbiol. Biotechnol. 2006, 70, 162–169. [Google Scholar] [CrossRef]
  49. Zhang, Y.; Min, B.; Huang, L.; Angelidaki, I. Generation of electricity and analysis of microbial communities in wheat straw biomass-powered microbial fuel cells. Appl. Environ. Microbiol. 2009, 75, 3389–3395. [Google Scholar] [CrossRef] [Green Version]
  50. Chen, S.L.; He, G.H.; Liu, Q.; Harnisch, F.; Zhou, Y.; Chen, Y.; Hanif, M.; Wang, S.Q.; Peng, X.W.; Hou, H.Q. Layered corrugated electrode macrostructures boost microbial bioelectrocatalysis. Energy Environ. Sci. 2012, 5, 9769–9772. [Google Scholar] [CrossRef]
  51. Kretzschmar, J.; Riedl, S.; Brown, R.K.; Schroder, U.; Harnisch, F. eLatrine: Lessons learned from the development of a low-tech MFC based on cardboard electrodes for the treatment of human feces. J. Electrochem. Soc. 2017, 164, H3065–H3072. [Google Scholar] [CrossRef]
  52. Liao, Q.; Zhang, J.; Li, J.; Ye, D.D.; Zhu, X.; Zhang, B. Increased performance of a tubular microbial fuel cell with a rotating carbon-brush anode. Biosens. Bioelectron. 2015, 63, 558–561. [Google Scholar] [CrossRef]
  53. Zhang, M.; Ma, Z.K.; Zhao, N.; Zhang, K.X.; Song, H.H. Increased power generation from cylindrical microbial fuel cell inoculated with P. aeruginosa. Biosen. Bioelectron. 2019, 141, 111394. [Google Scholar] [CrossRef] [PubMed]
  54. Wang, H.R.; Fu, B.Y.; Xi, J.Y.; Hu, H.Y.; Liang, P.; Huang, X.; Zhang, X.Y. Remediation of simulated malodorous surface water by columnar air cathode microbial fuel cells. Sci. Total Environ. 2019, 687, 287–296. [Google Scholar] [CrossRef] [PubMed]
  55. Luo, Y.; Zhang, F.; Wei, B.; Liu, G.L.; Zhang, R.D.; Logan, B.E. Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells. J. Power Sources 2011, 96, 9317–9321. [Google Scholar] [CrossRef]
  56. Zhang, F.; Xia, X.; Luo, Y.; Sun, D.; Call, D.F.; Logan, B.E. Improving startup performance with carbon mesh anodes in separator electrode assembly microbial fuel cells. Bioresour. Technol. 2013, 133, 74–81. [Google Scholar] [CrossRef]
  57. Huggins, T.; Wang, H.M.; Kearns, J.; Jenkins, P.; Ren, Z.J. Biochar as a sustainable electrode material for electricity production in microbial fuel cells. Bioresour. Technol. 2014, 157, 114–119. [Google Scholar] [CrossRef]
  58. Fu, B.Y.; Xu, T.; Guo, X.G.; Liang, P.; Huang, X.; Zhang, X.Y. Optimization and simulation of a carbon-based flow-through composite anode configuration to enhance power generation and improve effluent quality simultaneously for microbial fuel cells. J. Clean. Prod. 2019, 229, 542–551. [Google Scholar] [CrossRef]
  59. Chai, L.F.; Chai, L.C.; Suhaimi, N.; Son, R. Performance of air-cathode microbial fuel cell with wood charcoal as electrodes. Int. Food Res. J. 2010, 17, 6. [Google Scholar]
  60. Wang, B.; Han, J.I. A single chamber stackable microbial fuel cell with air cathode. Biotechnol. Lett. 2009, 31, 387–393. [Google Scholar] [CrossRef]
  61. Menicucci, J.; Beyenal, H.; Marsili, E.; Veluchamy, R.A.; Demir, G.; Lewandowski, Z. Procedure for determining maximum sustainable power generated by microbial fuel cells. Environ. Sci. Technol. 2006, 40, 1062–1068. [Google Scholar] [CrossRef] [PubMed]
  62. Yong, Y.C.; Dong, X.C.; Chan-Park, M.B.; Song, H.; Chen, P. Macroporous and monolithic anode based on polyaniline hybridized three-dimensional graphene for high-performance microbial fuel cells. ACS Nano 2012, 6, 2394–2400. [Google Scholar] [CrossRef]
  63. Pareek, A.; Shanthi-Sravan, J.; Venkata-Mohan, S. Exploring chemically reduced graphene oxide electrode for power generation in microbial fuel cell. Mater. Sci. Technol. 2019, 2, 600–606. [Google Scholar] [CrossRef]
  64. Wang, Z.B.; Ge, M.; Xiong, S.C.; Zhu, X.Q. Preparation of graphene/polyaniline-modified carbon nanotubes and their electrochemical properties in microbial fuel cell. Ionics 2017, 23, 1197–1202. [Google Scholar] [CrossRef]
  65. Li, H.Y.; Liao, B.; Xiong, J.; Zhou, X.W.; Zhi, H.Z.; Liu, X.; Li, X.P.; Li, W.S. Power output of microbial fuel cell emphasizing interaction of anodic binder with bacteria. J. Power Sources 2018, 379, 115–122. [Google Scholar] [CrossRef]
  66. Yang, S.; Jia, B.; Liu, H. Effects of the Pt loading side and cathode-biofilm on the performance of a membrane-less and single-chamber microbial fuel cell. Bioresour. Technol. 2009, 100, 1197–1202. [Google Scholar] [CrossRef] [PubMed]
  67. Moqsud, M.A.; Omine, K.; Yasufuku, N.; Hyodo, M.; Nakata, Y. Microbial fuel cell (MFC) for bioelectricity generation from organic wastes. Waste Manag. 2013, 33, 2465–2469. [Google Scholar] [CrossRef]
  68. Yu, Y.Y.; Wang, Y.Z.; Fang, Z.; Shi, Y.T.; Cheng, Q.W.; Chen, Y.X.; Shi, W.; Yong, Y.C. Single cell electron collectors for highly efficient wiring-up electronic abiotic/biotic interfaces. Nat. Commun. 2020, 11, 4087. [Google Scholar] [CrossRef]
  69. Kim, J.; Min, B.; Logan, B. Evaluation of procedures to acclimate a microbial fuel cell for electricity production. Appl. Microbiol. Biotechnol. 2005, 68, 23–30. [Google Scholar] [CrossRef]
  70. Rosenbaum, M.; Schroder, U.; Scholz, F. Investigation of the electrocatalytic oxidation of formate and ethanol at platinum black under microbial fuel cell conditions. J. Solid State Electrochem. 2006, 10, 872–878. [Google Scholar] [CrossRef]
  71. Rosenbaum, M.; Zhao, F.; Schröder, U.; Scholz, F. Interfacing electrocatalysis and biocatalysis with tungsten carbide: A high-performance, noble-metal-free microbial fuel cell. Angew. Chem. Int. Ed. 2006, 45, 6658–6661. [Google Scholar] [CrossRef] [PubMed]
  72. Yuan, Y.; Kim, S. Improved Performance of a Microbial Fuel Cell with Polypyrrole/Carbon Black Composite Coated Carbon Paper Anodes. Bull. Korean Chem. Soc. 2008, 29, 5. [Google Scholar]
  73. Adachi, M.; Shimomura, T.; Komatsu, M.; Yakuwa, H.; Miya, A. A novel mediator-polymer-modified anode for microbial fuel cells. Chem. Commun. 2008, 2055–2057. [Google Scholar] [CrossRef]
  74. Chen, S.; Hou, H.; Harnisch, F.; Patil, S.A.; Carmona-Martinez, A.A.; Agarwal, S.; Zhang, Y.; Sinha-Ray, S.; Yarin, A.L.; Greiner, A.; et al. Electrospun and solution blown three-dimentional carbon fiber nonwovens for application as electrodes in microbial fuel cells. Energy Environ. Sci. 2011, 4, 1417–1421. [Google Scholar] [CrossRef]
  75. Sun, M.; Zhang, F.; Tong, Z.H.; Sheng, G.P.; Chen, Y.Z.; Zhao, Y.; Chen, Y.P.; Zhou, S.Y.; Liu, G.; Tian, Y.C.; et al. A gold-sputtered carbon paper as an anode for improved electricity generation from a microbial fuel cell inoculated with Shewanella oneidensis MR-1. Biosens. Bioelectron. 2010, 26, 338–343. [Google Scholar] [CrossRef]
  76. Yang, W.; Li, J.; Ye, D.; Zhu, X.; Liao, Q. Bamboo charcoal as a cost-effective catalyst for an air-cathode of microbial fuel cells. Electrochim. Acta 2017, 224, 585–592. [Google Scholar] [CrossRef] [Green Version]
  77. Li, Z.; Haynes, R.; Sato, E.; Shields, M.; Fujita, Y.; Sato, C. Microbial community analysis of an a single chamber microbial fuel cell using potato wastewater. Water Environ. Res. 2014, 86, 324–330. [Google Scholar] [CrossRef]
  78. Rizzoni, G. Principles and Applications of Electrical Engineering, 2nd ed.; IRWIN: Chicago, IL, USA, 1996; pp. 97–98. [Google Scholar]
  79. Abedom, F.; Sakthivel, S.; Asfaw, D.; Melese, B.; Solomon, E.; Kumar, S.S. Development of natural fiber hybrid composites using sugarcane bagasse and bamboo charcoal for automotive thermal insulation materials. Adv. Mater. Sci. Eng. 2021, 2021, 2508840. [Google Scholar] [CrossRef]
  80. Asada, T.; Ohkubo, T.; Kawata, K.; Oikawa, K. Ammonia adsorption on bamboo charcoal with acid treatment. J. Health Sci. 2006, 52, 585–589. [Google Scholar] [CrossRef] [Green Version]
  81. Ho, M.; Lau, K.; Wang, H.; Hui, D. Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles. Compos. Part B Eng. 2015, 81, 14–25. [Google Scholar] [CrossRef]
  82. Isa, S.S.M.; Ramli, M.M.; Hambali, N.A.M.A.; Kasjoo, S.R.; Isa, M.M.; Nor, N.I.M.; Khalid, N.; Ahmad, N. Adsorption properties and potential applications of bamboo charcoal: A review. In Proceedings of the MATEC Web of Conferences—IConGDM 2016, Amsterdam, The Netherlands, 23–25 March 2016; Volume 78, p. 01097. [Google Scholar] [CrossRef] [Green Version]
  83. Liu, H.; Ao, H.; Xiong, X.; Xiao, J.; Liu, J. Arsenic removal from water by iron-modified bamboo charcoal. Water Air Soil Pollut. 2012, 223, 1033–1044. [Google Scholar] [CrossRef]
  84. Lou, C.W.; Lin, C.W.; Lei, C.H.; Su, K.H.; Hsu, C.H.; Liu, Z.H.; Lin, J.H. PET/PP blend with bamboo charcoal to produce functional composites. J. Mater. Process Technol. 2007, 192, 428–433. [Google Scholar] [CrossRef]
  85. Mousa, M.; Dong, Y.; Davies, I.J. Eco-friendly polyvinyl alcohol (PVA)/bamboo charcoal (BC) nanocomposites with superior mechanical and thermal properties. Adv. Compos. Mater. 2018, 27, 499–509. [Google Scholar] [CrossRef] [Green Version]
  86. Park, S.H.; Wistara, N.J.; Febrianto, F.; Lee, M. Evaluation of sembilang bamboo (Dendrocalamus giganteus) charcoal for potential utilization. Bioresources 2020, 15, 6–19. [Google Scholar]
  87. Wang, F.; Wang, H.; Ma, J. Adsorption of cadmium (II) ions from aqueous solution by a new low-cost adsorbent—bamboo charcoal. J. Hazard. Mater. 2009, 177, 300–306. [Google Scholar] [CrossRef]
  88. Zhu, S.; Guo, Y.; Chen, Y.; Su, N.; Zhang, K.; Liu, S. Effects of the incorporation of nano-bamboo charcoal on the mechanical properties and thermal behavior of bamboo-plastic composites. Bioresources 2016, 11, 2684–2697. [Google Scholar] [CrossRef] [Green Version]
  89. Zhang, J.; Li, J.; Ye, D.; Zhu, X.; Liao, Q.; Zhang, B. Tubular bamboo charcoal for anode in microbial fuel cells. J. Power Sources 2014, 272, 277–282. [Google Scholar] [CrossRef]
  90. Scurlock, J.M.O.; Dayton, D.C.; Hames, B. Bamboo: An overlooked biomass resource? Biomass Bioenergy 2000, 19, 229–244. [Google Scholar] [CrossRef] [Green Version]
  91. Li, P.; Zhou, G.; Du, H.; Lu, D.; Mo, L.; Xu, X.; Shi, Y.; Zhou, Y. Current and potential carbon stocks in Moso bamboo forests in China. J. Environ. Manag. 2015, 156, 89–96. [Google Scholar] [CrossRef]
  92. Kim, B.; Mohan, S.V.; Fapyane, D.; Chang, I.S. Controlling voltage reversal in microbial fuel cells. Trends Biotechnol. 2020, 38, 667–678. [Google Scholar] [CrossRef]
  93. An, J.; Lee, H.S. Occurrence and implications of voltage reversal in stacked microbial fuel cells. ChemSusChem 2014, 7, 1689–1695. [Google Scholar] [CrossRef] [PubMed]
  94. Oh, S.E.; Logan, B.E. Voltage reversal during microbial fuel cell stack operation. J. Power Sources 2007, 167, 11–17. [Google Scholar] [CrossRef]
  95. Tan, W.H.; Chong, S.; Fang, H.W.; Pan, K.L.; Mohamad, M.; Lim, J.W.; Tiong, T.J.; Chan, Y.J.; Huang, C.M.; Yang, T.C.K. Microbial Fuel Cell Technology—A Critical Review on Scale-Up Issues. Processes 2021, 9, 985. [Google Scholar] [CrossRef]
  96. He, Z.; Mansfel, F. Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies. Energy Environ. Sci. 2009, 2, 215–219. [Google Scholar] [CrossRef]
Processes 09 02194 g001 550
Figure 1. Single-chamber air-cathode MFC with a Pt-coated carbon cloth cathode and bam-boo charcoal (BC) anode: (a) photo; (b) positioning of bamboo charcoal plates.
Figure 1. Single-chamber air-cathode MFC with a Pt-coated carbon cloth cathode and bam-boo charcoal (BC) anode: (a) photo; (b) positioning of bamboo charcoal plates.
Processes 09 02194 g001
Processes 09 02194 g002 550
Figure 2. SEM images of bamboo charcoal anode: (a) external surface; (b) cross section.
Figure 2. SEM images of bamboo charcoal anode: (a) external surface; (b) cross section.
Processes 09 02194 g002
Processes 09 02194 g003 550
Figure 3. Performance of MFC 1, MFC 2, and MFC 3 individually: (a) power curves and (b) polarization curves.
Figure 3. Performance of MFC 1, MFC 2, and MFC 3 individually: (a) power curves and (b) polarization curves.
Processes 09 02194 g003
Processes 09 02194 g004 550
Figure 4. Current vs. internal resistance in MFC 1, MFC 2 and MFC 3.
Figure 4. Current vs. internal resistance in MFC 1, MFC 2 and MFC 3.
Processes 09 02194 g004
Processes 09 02194 g005 550
Figure 5. Performance of the MFCs in series: (a) power curves and (b) polarization curves for the MFC 1, MFC 1-2, and MFC 1-2-3 settings.
Figure 5. Performance of the MFCs in series: (a) power curves and (b) polarization curves for the MFC 1, MFC 1-2, and MFC 1-2-3 settings.
Processes 09 02194 g005
Processes 09 02194 g006 550
Figure 6. Power density for the MFC 1, MFC 1-2, and MFC 1-2-3 settings.
Figure 6. Power density for the MFC 1, MFC 1-2, and MFC 1-2-3 settings.
Processes 09 02194 g006
Processes 09 02194 g007 550
Figure 7. Internal resistance vs. bamboo charcoal anode resistance.
Figure 7. Internal resistance vs. bamboo charcoal anode resistance.
Processes 09 02194 g007
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Sato, C.; Paucar, N.E.; Chiu, S.; Mahmud, M.Z.I.M.; Dudgeon, J. Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation. Processes 2021, 9, 2194. https://doi.org/10.3390/pr9122194

AMA Style

Sato C, Paucar NE, Chiu S, Mahmud MZIM, Dudgeon J. Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation. Processes. 2021; 9(12):2194. https://doi.org/10.3390/pr9122194

Chicago/Turabian Style

Sato, Chikashi, N. Evelin Paucar, Steve Chiu, Muhammad Z. I. M. Mahmud, and John Dudgeon. 2021. "Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation" Processes 9, no. 12: 2194. https://doi.org/10.3390/pr9122194

APA Style

Sato, C., Paucar, N. E., Chiu, S., Mahmud, M. Z. I. M., & Dudgeon, J. (2021). Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation. Processes, 9(12), 2194. https://doi.org/10.3390/pr9122194

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop