Ali, M.U.; Nadeem, A.; Ashfaq, B.; Ullah, S.; Waseem, M.; Aslam, M.A.; Alam, Q.A.
Optimizing Impact Toughness in 3D-Printed PLA Structures Using Hilbert Curve and Honeycomb Infill Patterns. Eng. Proc. 2024, 75, 27.
https://doi.org/10.3390/engproc2024075027
AMA Style
Ali MU, Nadeem A, Ashfaq B, Ullah S, Waseem M, Aslam MA, Alam QA.
Optimizing Impact Toughness in 3D-Printed PLA Structures Using Hilbert Curve and Honeycomb Infill Patterns. Engineering Proceedings. 2024; 75(1):27.
https://doi.org/10.3390/engproc2024075027
Chicago/Turabian Style
Ali, Muhammad Usman, Azka Nadeem, Babar Ashfaq, Shafi Ullah, Muhammad Waseem, Muhammad Arbab Aslam, and Qazi Amaan Alam.
2024. "Optimizing Impact Toughness in 3D-Printed PLA Structures Using Hilbert Curve and Honeycomb Infill Patterns" Engineering Proceedings 75, no. 1: 27.
https://doi.org/10.3390/engproc2024075027
APA Style
Ali, M. U., Nadeem, A., Ashfaq, B., Ullah, S., Waseem, M., Aslam, M. A., & Alam, Q. A.
(2024). Optimizing Impact Toughness in 3D-Printed PLA Structures Using Hilbert Curve and Honeycomb Infill Patterns. Engineering Proceedings, 75(1), 27.
https://doi.org/10.3390/engproc2024075027
