Engineering Hydrogeology Research Related to Mining Activities

A special issue of Water (ISSN 2073-4441). This special issue belongs to the section "Hydraulics and Hydrodynamics".

Deadline for manuscript submissions: 25 March 2025 | Viewed by 5688

Special Issue Editors


E-Mail Website
Guest Editor
Institute of Mine Water Hazards Prevention and Controlling Technology, School of Resources and Geosciences, China University of Mining and Technology, Xuzhou 221116, China
Interests: hydrogeology; engineering geology; geological disasters research related to mining activities; geothermal resource development; intelligent warning and monitor of geological disasters

E-Mail Website
Guest Editor
1. National Engineering Research Center of Coal Mine Water Hazard Controlling, Beijing 100083, China
2. College of Geoscience and Surveying Engineering, China University of Mining and Technology, Beijing 100083, China
Interests: coal mine water hazard controlling; grouting treatment; water exploration and discharge; advanced drainage; water resource protection; roof water disaster control; mine water inrush

Special Issue Information

Dear Colleagues,

Coal mining usually produces a large amount of mine water and causes a series of engineering hydrogeology problems. On the one hand, coal mining causes safety and environmental impact problems, such as groundwater loss and mine water pollution. On the other hand, coal mining causes some water inrush accidents, such as water inrush from separate layers, water inrush from sand and water inrush from coal seam floors. Although many scholars have been rapidly advancing the field by adopting new ideas and concepts, the safety of mining conditions and the groundwater environment in the mining area have been greatly improved, and the technology, processes and materials of mine water prevention and treatment have been greatly developed, but there are still some problems which include the engineering hydrogeological mechanism of water inrush, hydrogeological problems of deep recharge of mine water, intelligent monitoring and early warning of coal mine water disaster, water-preserved coal mining and research on rock dynamics with fluid–structure coupling. Potential topics include, but are not limited to, the following:

  • Mechanism of water inrush;
  • Mine water hazards prevention and controlling technology;
  • Prediction of mine water hazard;
  • New technology of mine water hazard monitoring and early warning;
  • Water-preserved coal mining;
  • Prevention and control of mine water pollution;
  • Mine water reinjection and geological storage;
  • Modeling of groundwater in mining area;
  • Research on rock dynamics with fluid–structure coupling.

Prof. Dr. Wei Qiao
Dr. Yifan Zeng
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Water is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • mechanism of water inrush
  • prediction of mine water hazard
  • intelligent warning and monitor of mine water hazard
  • mine water injection and storage
  • mine water reinjection and geological storage
  • mine inflow
  • evolution of groundwater flow field
  • water inrush from separate layer
  • research on rock dynamics with fluid–structure coupling

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (6 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

26 pages, 14152 KiB  
Article
Evaluation of Water Inrush Risk in the Fault Zone of the Coal Seam Floor in Madaotou Coal Mine, Shanxi Province, China
by Shuai Yu, Hanghang Ding, Moyuan Yang and Menglin Zhang
Water 2025, 17(2), 259; https://doi.org/10.3390/w17020259 - 17 Jan 2025
Viewed by 400
Abstract
As coal seams are mined at greater depths, the threat of high water pressure from the confined aquifer in the floor that mining operations face has become increasingly prominent. Taking the Madaotou mine field in the Datong Coalfield as the research object, in [...] Read more.
As coal seams are mined at greater depths, the threat of high water pressure from the confined aquifer in the floor that mining operations face has become increasingly prominent. Taking the Madaotou mine field in the Datong Coalfield as the research object, in the context of mining under pressure, for the main coal seams in the mining area, first of all, an improved evaluation method for the vulnerability of floor water inrush is adopted for hazard prediction. Secondly, numerical simulation is used to conduct a simulation analysis on the fault zones in high-risk areas. By using the fuzzy C-means clustering method (FCCM) to improve the classification method for the normalized indicators in the original variable-weight vulnerability evaluation, the risk zoning for water inrush from the coal seam floor is determined. Then, through the numerical simulation method, a simulation analysis is carried out on high-risk areas to simulate the disturbance changes of different mining methods on the fault zones so as to put forward reasonable mining methods. The results show that the classification of the variable-weight intervals of water inrush from the coal seam floor is more suitable to be classified by using fuzzy clustering, thus improving the prediction accuracy. Based on the time effect of the delayed water inrush of faults, different mining methods determine the duration of the disturbance on the fault zones. Therefore, by reducing the disturbance time on the fault zones, the risk of karst water inrush from the floor of the fault zones can be reduced. Through prediction evaluation and simulation analysis, the evaluation of the risk of water inrush in coal mines has been greatly improved, which is of great significance for ensuring the safe and efficient mining of mines. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

20 pages, 6013 KiB  
Article
Sustainable Utilization of Dewatering Sludge for the Development of Reinforcement Grouting Materials in Downhole Applications
by Xianxiang Zhu, Yanhui Du and Song Li
Water 2025, 17(2), 192; https://doi.org/10.3390/w17020192 - 12 Jan 2025
Viewed by 613
Abstract
The mining and processing of coal resources generate substantial coal-based solid wastes, such as coal gangue and slag, which pose environmental challenges, occupy land, and are difficult to manage. However, utilizing these wastes for the stabilization and solidification (S/S) of municipal sludge containing [...] Read more.
The mining and processing of coal resources generate substantial coal-based solid wastes, such as coal gangue and slag, which pose environmental challenges, occupy land, and are difficult to manage. However, utilizing these wastes for the stabilization and solidification (S/S) of municipal sludge containing chromium (Cr) and nickel (Ni) offers an effective solution for mitigating environmental and groundwater pollution while enabling sustainable waste treatment and resource utilization. This study applied an alkali-activated coal gangue–S95 granulated blast furnace slag-based binder (CGS) to the S/S treatment of municipal sludge. The effects of the liquid-to-solid ratio, alkali activator dosage, sludge content, and incineration on compressive strength and the leaching of Cr and Ni were analyzed. The results showed that compressive strength decreased with increases in the sludge content and liquid-to-solid ratio, while incinerated sludge (ESA) samples exhibited better strength than raw sludge (ES). Incineration decomposed the calcite (CaCO3) into CaO, which facilitated the oxidation of Cr(III) to Cr(VI) and increased Cr leaching in the ESA. However, the ESA samples demonstrated superior heavy metal stabilization, as CGS reduced Cr(VI) to Cr(III) and immobilized it through the formation of chromite phases. Using ESA as a binder in CGS provides a safe, efficient approach for resource recovery and heavy metal stabilization, offering a novel solution for the environmental management and utilization of coal-based solid wastes. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

22 pages, 5592 KiB  
Article
Multi-Factor Prediction of Water Inflow from the Working Face Based on an Improved SSA-RG-MHA Model
by Yingying Ding, Shangxian Yin, Zhenxue Dai, Huiqing Lian and Changsen Bu
Water 2024, 16(23), 3390; https://doi.org/10.3390/w16233390 - 25 Nov 2024
Viewed by 609
Abstract
The accurate prediction of mine water inflow is very important for mine design and safe production. The existing forecasting methods based on single factors are often less accurate and stable. Multi-factor data-driven models play a key role in predicting water inflow without taking [...] Read more.
The accurate prediction of mine water inflow is very important for mine design and safe production. The existing forecasting methods based on single factors are often less accurate and stable. Multi-factor data-driven models play a key role in predicting water inflow without taking physical changes into account. Therefore, a multi-factor prediction method based on an improved SSA-RG-MHA model is introduced in this study. The model uses two sets of data related to water inflow as the input to improve prediction accuracy and stability. The model first applies a residual network (ResNet) to mitigate the problems of disappearing gradients and explosions. Gated Recurrent Units (GRUs) are then used to learn the characteristics of long-term sequence data. The model combines ResNet and GRU into a new network architecture and incorporates a multiple attention (MHA) mechanism to focus on information at different time scales. Finally, the optimized sparrow search algorithm (SSA) is used to optimize the network parameters to improve the global search ability and avoid local optimization. The mine water inflow is affected by many factors, among which the water level and microseismic energy data are particularly important. Therefore, these data types are selected as the key variables of mine water inflow prediction. The experimental results show that the improved SSA-RG-MHA model significantly reduces the prediction error: the mean absolute error (MAE), root mean square error (RMSE), and mean absolute percentage error (MAPE) were reduced to 4.42 m3/h, 7.17 m3/h, and 5%, respectively. The multi-factor water inflow prediction method is more stable and reliable than single-factor models as it comprehensively considers the factors affecting the water inflow of the working face. Compared with other multi-factor models, this model exhibits higher prediction accuracy and robustness, providing a basis for mine water hazard monitoring and early warning. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

12 pages, 1777 KiB  
Article
Use of Moringa Oleifera as a Natural Coagulant in the Reduction of Water Turbidity in Mining Activities
by Angélica Geovanna Zea Cobos, Jessica Gutiérrez and Pablo Caballero
Water 2024, 16(16), 2315; https://doi.org/10.3390/w16162315 - 17 Aug 2024
Viewed by 1697
Abstract
Mining is a key industrial activity contributing to the global economy, but it generates large volumes of wastewater with high turbidity due to mineral extraction and processing. In Ecuador, the growth of industrial and artisanal mining has worsened water pollution. Effective wastewater management [...] Read more.
Mining is a key industrial activity contributing to the global economy, but it generates large volumes of wastewater with high turbidity due to mineral extraction and processing. In Ecuador, the growth of industrial and artisanal mining has worsened water pollution. Effective wastewater management is essential to mitigate the environmental impacts. Traditionally, chemical coagulants like aluminum sulfate reduce water turbidity, but they have drawbacks such as high costs, chemical waste generation, and adverse health effects. The residual aluminum in drinking water can harm the central nervous system and is linked to diseases like Alzheimer’s and dialysis-related conditions. Given these concerns, evaluating plant species as natural coagulants is crucial. Moringa oleifera, widely found in tropical dry forests, has shown effectiveness in water treatment. This study assesses the efficacy of Moringa oleifera paste as a natural coagulant to reduce turbidity in mining wastewater compared to the efficacy of aluminum sulfate. Coagulation and flocculation tests determined the optimal doses and efficiency of both coagulants. The results indicated that Moringa oleifera achieved an 85% turbidity reduction compared to a 92% reduction with aluminum sulfate. This demonstrates its viability and effectiveness as a sustainable, economical, and safe alternative for water purification, promoting environmentally friendly practices in the mining industry. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

20 pages, 16475 KiB  
Article
Evaluation of the Effects of Pre-Grouting in Combination with Group Holes on the Risk of Water Inrush through Coal Seam Floors
by Shiyuan Tian, Chunfang Gao, Junchao Yue, Peiguo Heng, Shuitao Guo and Xinyi Wang
Water 2024, 16(8), 1160; https://doi.org/10.3390/w16081160 - 19 Apr 2024
Viewed by 1051
Abstract
Coal mine pre-grouting is an important means to reduce the risk of coal seam floor water inrush, and the scientific evaluation of its effects is an important basis for the formulation of water control countermeasures and the realization of safe mining. This paper [...] Read more.
Coal mine pre-grouting is an important means to reduce the risk of coal seam floor water inrush, and the scientific evaluation of its effects is an important basis for the formulation of water control countermeasures and the realization of safe mining. This paper takes the Guhanshan Mine 15,051 working face grouting project as the research object and selects the grouting volume, the length of the meter grouting, the dry material value in tons of water, the complexity of faults, and the threat of water inrush at the working face as the index factors with which to evaluate the effectiveness of the grouting. The geological structure is quantified by fractal theory. The subjective, objective, and comprehensive weights of the index factors are determined by the analytic hierarchy process, the CRITIC method, and the combination weighting method. The grouting effect on the working face is quantitatively identified by the fuzzy variable set comprehensive evaluation model, and zoning is carried out. The research shows that the areas with optimal, good, qualified, and poor grouting effect at the 15,051 working face account for 4.66%, 74.34%, 21.00%, and 0% of the working face area, respectively, and the proportion at the level of qualified or above accounts for 100%. The safety results at the 15,051 working face prove that the selected evaluation index factors are representative, the established model is reliable, and the evaluation results are in line with actual conditions. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

Review

Jump to: Research

24 pages, 3758 KiB  
Review
Technical Analysis and Application Prospects of Magnetic Source Transient Electromagnetic Coil Devices in Hydrogeological Survey of Mining Area
by Yang Yang, Fei Yang, Bo Wang, Wangping Qian, Ying Wang and Yuanbin Zuo
Water 2025, 17(2), 171; https://doi.org/10.3390/w17020171 - 10 Jan 2025
Viewed by 496
Abstract
The transient electromagnetic method (TEM) has a wide range of applications in the hydrogeological exploration of mining engineering. This method is highly sensitive to groundwater responses and provides reliable data for the prevention of water-related disasters, such as sudden water surges and gushes. [...] Read more.
The transient electromagnetic method (TEM) has a wide range of applications in the hydrogeological exploration of mining engineering. This method is highly sensitive to groundwater responses and provides reliable data for the prevention of water-related disasters, such as sudden water surges and gushes. However, there are currently a lack of comprehensive and systematic analyses and summaries regarding the characteristics of magnetic source transient electromagnetic coil devices. Based on the fixed characteristics of the field source, this paper categorizes magnetic source transient electromagnetic coil devices into fixed-source devices and moving-source devices. It provides an in-depth introduction and analysis of the working principles, technical characteristics, existing applications, and development trends of these two types of devices. This study provides important references for the selection and application of magnetic source transient electromagnetic coil devices. In the future, the development of magnetic source transient electromagnetic devices will focus on deeper measurement depths, higher lateral resolution, non-contact coupling, and efficient detection, moving towards multifunctionality, automation, and intelligence. This paper can provide a technical reference for the selection of magnetic source transient electromagnetic coil devices and their application in hydrogeological exploration of mining engineering. Full article
(This article belongs to the Special Issue Engineering Hydrogeology Research Related to Mining Activities)
Show Figures

Figure 1

Back to TopTop