Next Issue
Volume 23, August-2
Previous Issue
Volume 23, July-2
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
7.3
3.4
Journals
Sensors
Volume 23
Issue 15
sensors-logo

Journal Menu

► Journal Menu

Journal Browser

► Journal Browser
share announcement

Sensors, Volume 23, Issue 15 (August-1 2023) – 364 articles

Cover Story (view full-size image): The versatility of corrole complexes has raised interest in the use of these molecules as elements of chemical sensors. However, their scarce conductivity limits the development of simple conductometric sensors and requires the use of optical or mass transducers that are rather more cumbersome and less prone to be integrated into microelectronics systems. Herewith, we introduce two heterostructure sensors combining lutetium bisphthalocyanine with either pentafluorophenyl- or methoxyphenyl-substituted copper corrole complexes. The difference in electronic effects induces opposite responses with respect to ammonia, with n-type or p-type behaviors. Both devices are capable of detecting ammonia down to 10 ppm at room temperature, with a high but reversible sensitivity with respect to relative humidity. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
20 pages, 45778 KiB  
Article
Unveiling the Dynamics of Thermal Characteristics Related to LULC Changes via ANN
by Yasir Hassan Khachoo, Matteo Cutugno, Umberto Robustelli and Giovanni Pugliano
Sensors 2023, 23(15), 7013; https://doi.org/10.3390/s23157013 - 7 Aug 2023
Cited by 6 | Viewed by 1726
Abstract
Continuous and unplanned urbanization, combined with negative alterations in land use land cover (LULC), leads to a deterioration of the urban thermal environment and results in various adverse ecological effects. The changes in LULC and thermal characteristics have significant implications for the economy, [...] Read more.
Continuous and unplanned urbanization, combined with negative alterations in land use land cover (LULC), leads to a deterioration of the urban thermal environment and results in various adverse ecological effects. The changes in LULC and thermal characteristics have significant implications for the economy, climate patterns, and environmental sustainability. This study focuses on the Province of Naples in Italy, examining LULC changes and the Urban Thermal Field Variance Index (UTFVI) from 1990 to 2022, predicting their distributions for 2030. The main objectives of this research are the investigation of the future seasonal thermal characteristics of the study area by characterizing land surface temperature (LST) through the UTFVI and analyzing LULC dynamics along with their correlation. To achieve this, Landsat 4-5 Thematic Mapper (TM) and Landsat 9 Operational Land Imager (OLI) imagery were utilized. LULC classification was performed using a supervised satellite image classification system, and the predictions were carried out using the cellular automata-artificial neural network (CA-ANN) algorithm. LST was calculated using the radiative transfer equation (RTE), and the same CA-ANN algorithm was employed to predict UTFVI for 2030. To investigate the multi-temporal correlation between LULC and UTFVI, a cross-tabulation technique was employed. The study’s findings indicate that between 2022 and 2030, there will be a 9.4% increase in built-up and bare-land areas at the expense of the vegetation class. The strongest UTFVI zone during summer is predicted to remain stable from 2022 to 2030, while winter UTFVI shows substantial fluctuations with a 4.62% decrease in the none UTFVI zone and a corresponding increase in the strongest UTFVI zone for the same period. The results of this study reveal a concerning trend of outward expansion in the built-up area of the Province of Naples, with central northern regions experiencing the highest growth rate, predominantly at the expense of vegetation cover. These predictions emphasize the urgent need for proactive measures to preserve and protect the diminishing vegetation cover, maintaining ecological balance, combating the urban heat island effect, and safeguarding biodiversity in the province. Full article
(This article belongs to the Special Issue Remote Sensing Satellites Data Analysis for Land Use / Land Cover (LULC) and Vegetation Monitoring)
►▼ Show Figures

Figure 1

21 pages, 1955 KiB  
Article
Optimized Classifier Learning for Face Recognition Performance Boost in Security and Surveillance Applications
by Jitka Poměnková and Tobiáš Malach
Sensors 2023, 23(15), 7012; https://doi.org/10.3390/s23157012 - 7 Aug 2023
Cited by 2 | Viewed by 1614
Abstract
Face recognition has become an integral part of modern security processes. This paper introduces an optimization approach for the quantile interval method (QIM), a promising classifier learning technique used in face recognition to create face templates and improve recognition accuracy. Our research offers [...] Read more.
Face recognition has become an integral part of modern security processes. This paper introduces an optimization approach for the quantile interval method (QIM), a promising classifier learning technique used in face recognition to create face templates and improve recognition accuracy. Our research offers a three-fold contribution to the field. Firstly, (i) we strengthened the evidence that QIM outperforms other contemporary template creation approaches. For this reason, we investigate seven template creation methods, which include four cluster description-based methods and three estimation-based methods. Further, (ii) we extended testing; we use a nearly four times larger database compared to the previous study, which includes a new set, and we report the recognition performance on this extended database. Additionally, we distinguish between open- and closed-set identification. Thirdly, (iii) we perform an evaluation of the cluster estimation-based method (specifically QIM) with an in-depth analysis of its parameter setup in order to make its implementation feasible. We provide instructions and recommendations for the correct parameter setup. Our research confirms that QIM’s application in template creation improves recognition performance. In the case of automatic application and optimization of QIM parameters, improvement recognition is about 4–10% depending on the dataset. In the case of a too general dataset, QIM also provides an improvement, but the incorporation of QIM into an automated algorithm is not possible, since QIM, in this case, requires manual setting of optimal parameters. This research contributes to the advancement of secure and accurate face recognition systems, paving the way for its adoption in various security applications. Full article
(This article belongs to the Special Issue Advanced Technologies and Solutions for Modern Communication and Sensing Systems)
►▼ Show Figures

Figure 1

23 pages, 1530 KiB  
Article
Enhanced Dual Convolutional Neural Network Model Using Explainable Artificial Intelligence of Fault Prioritization for Industrial 4.0
by Sekar Kidambi Raju, Seethalakshmi Ramaswamy, Marwa M. Eid, Sathiamoorthy Gopalan, Amel Ali Alhussan, Arunkumar Sukumar and Doaa Sami Khafaga
Sensors 2023, 23(15), 7011; https://doi.org/10.3390/s23157011 - 7 Aug 2023
Cited by 1 | Viewed by 1525
Abstract
Artificial intelligence (AI) systems are increasingly used in corporate security measures to predict the status of assets and suggest appropriate procedures. These programs are also designed to reduce repair time. One way to create an efficient system is to integrate physical repair agents [...] Read more.
Artificial intelligence (AI) systems are increasingly used in corporate security measures to predict the status of assets and suggest appropriate procedures. These programs are also designed to reduce repair time. One way to create an efficient system is to integrate physical repair agents with a computerized management system to develop an intelligent system. To address this, there is a need for a new technique to assist operators in interacting with a predictive system using natural language. The system also uses double neural network convolutional models to analyze device data. For fault prioritization, a technique utilizing fuzzy logic is presented. This strategy ranks the flaws based on the harm or expense they produce. However, the method’s success relies on ongoing improvement in spoken language comprehension through language modification and query processing. To carry out this technique, a conversation-driven design is necessary. This type of learning relies on actual experiences with the assistants to provide efficient learning data for language and interaction models. These models can be trained to have more natural conversations. To improve accuracy, academics should construct and maintain publicly usable training sets to update word vectors. We proposed the model dataset (DS) with the Adam (AD) optimizer, Ridge Regression (RR) and Feature Mapping (FP). Our proposed algorithm has been coined with an appropriate acronym DSADRRFP. The same proposed approach aims to leverage each component’s benefits to enhance the predictive model’s overall performance and precision. This ensures the model is up-to-date and accurate. In conclusion, an AI system integrated with physical repair agents is a useful tool in corporate security measures. However, it needs to be refined to extract data from the operating system and to interact with users in a natural language. The system also needs to be constantly updated to improve accuracy. Full article
(This article belongs to the Section Industrial Sensors)
►▼ Show Figures

Figure 1

26 pages, 4157 KiB  
Article
Investigation of Accuracy of TOA and SNR of Radio Pulsar Signals for Vehicles Navigation
by Hristo Kabakchiev, Vera Behar, Dorina Kabakchieva, Valentin Kisimov and Kamelia Stefanova
Sensors 2023, 23(15), 7010; https://doi.org/10.3390/s23157010 - 7 Aug 2023
Viewed by 1401
Abstract
It is known that X-ray and gamma-ray pulsars can only be observed by spacecraft because signals from these pulsars are impossible to be detected on the Earth’s surface due to their strong absorption by the Earth’s atmosphere. The article is devoted to the [...] Read more.
It is known that X-ray and gamma-ray pulsars can only be observed by spacecraft because signals from these pulsars are impossible to be detected on the Earth’s surface due to their strong absorption by the Earth’s atmosphere. The article is devoted to the theoretical aspects regarding the development of an autonomous radio navigation system for transport with a small receiving antenna, using radio signals from pulsars, similar to navigation systems for space navigation. Like GNSS systems (X-ray and radio), they use signals from four suitable pulsars to position the object. These radio pulsars (out of 50) are not uniformly distributed but are grouped in certain directions (at least 6 clusters can be determined). When using small antennas (with an area of up to tens of square meters) for pulsar navigation, the energy of the pulsar signals received within a few minutes is extremely insufficient to obtain the required level of SNR at the output of the receiver to form TOA estimation, ensuring positioning accuracy up to tens of kilometers. This is one of the scientific tasks that is solved in the paper by studying the relationship between the SNR of the receiver output, which depends on the size of the antenna, the type of signal processing, and the magnitude of the TOA accuracy estimate. The second scientific task that is solved in the paper is the adaptation of all the possible approaches and algorithms suggested in the statistical theory of radars in the suggested signal algorithm for antenna processing and to evaluate the parameters of the TOA and DS pulsar signals, in order to increase the SNR ratio at the receiver output, while preserving the dimensions of the antenna. In this paper, the functional structure of signal processing in a pulsar transport navigation system is proposed, and the choice of the observed second and millisecond pulsars for obtaining a more accurate TOA estimate is discussed. The proposed estimates of positioning accuracy (TOA only, no phase) in an autonomous pulsar vehicle navigation system would only be suitable for the navigation of large vehicles (sea, air, or land) that do not require accurate navigation at sea, air, or desert. Large-sized antennas with an area of tens of square meters to hundreds of square meters can be installed in such vehicles. Full article
(This article belongs to the Section Navigation and Positioning)
►▼ Show Figures

Figure 1

17 pages, 20287 KiB  
Article
Frequency-Selective Surface-Based MIMO Antenna Array for 5G Millimeter-Wave Applications
by Iftikhar Ud Din, Mohammad Alibakhshikenari, Bal S. Virdee, Renu Karthick Rajaguru Jayanthi, Sadiq Ullah, Salahuddin Khan, Chan Hwang See, Lukasz Golunski and Slawomir Koziel
Sensors 2023, 23(15), 7009; https://doi.org/10.3390/s23157009 - 7 Aug 2023
Cited by 26 | Viewed by 2460
Abstract
In this paper, a radiating element consisting of a modified circular patch is proposed for MIMO arrays for 5G millimeter-wave applications. The radiating elements in the proposed 2 × 2 MIMO antenna array are orthogonally configured relative to each other to mitigate mutual [...] Read more.
In this paper, a radiating element consisting of a modified circular patch is proposed for MIMO arrays for 5G millimeter-wave applications. The radiating elements in the proposed 2 × 2 MIMO antenna array are orthogonally configured relative to each other to mitigate mutual coupling that would otherwise degrade the performance of the MIMO system. The MIMO array was fabricated on Rogers RT/Duroid high-frequency substrate with a dielectric constant of 2.2, a thickness of 0.8 mm, and a loss tangent of 0.0009. The individual antenna in the array has a measured impedance bandwidth of 1.6 GHz from 27.25 to 28.85 GHz for S11 ≤ −10 dB, and the MIMO array has a gain of 7.2 dBi at 28 GHz with inter radiator isolation greater than 26 dB. The gain of the MIMO array was increased by introducing frequency-selective surface (FSS) consisting of 7 × 7 array of unit cells comprising rectangular C-shaped resonators, with one embedded inside the other with a central crisscross slotted patch. With the FSS, the gain of the MIMO array increased to 8.6 dBi at 28 GHz. The radiation from the array is directional and perpendicular to the plain of the MIMO array. Owing to the low coupling between the radiating elements in the MIMO array, its Envelope Correlation Coefficient (ECC) is less than 0.002, and its diversity gain (DG) is better than 9.99 dB in the 5G operating band centered at 28 GHz between 26.5 GHz and 29.5 GHz. Full article
(This article belongs to the Special Issue Millimeter-Wave Antennas for 5G)
►▼ Show Figures

Figure 1

19 pages, 38915 KiB  
Article
Crop Mapping Based on Sentinel-2 Images Using Semantic Segmentation Model of Attention Mechanism
by Meixiang Gao, Tingyu Lu and Lei Wang
Sensors 2023, 23(15), 7008; https://doi.org/10.3390/s23157008 - 7 Aug 2023
Cited by 2 | Viewed by 2293
Abstract
Using remote sensing images to identify crop plots and estimate crop planting area is an important part of agricultural remote sensing monitoring. High-resolution remote sensing images can provide rich information regarding texture, tone, shape, and spectrum of ground objects. With the advancement of [...] Read more.
Using remote sensing images to identify crop plots and estimate crop planting area is an important part of agricultural remote sensing monitoring. High-resolution remote sensing images can provide rich information regarding texture, tone, shape, and spectrum of ground objects. With the advancement of sensor and information technologies, it is now possible to categorize crops with pinpoint accuracy. This study defines crop mapping as a semantic segmentation problem; therefore, a deep learning method is proposed to identify the distribution of corn and soybean using the differences in the spatial and spectral features of crops. The study area is located in the southwest of the Great Lakes in the United States, where corn and soybean cultivation is concentrated. The proposed attention mechanism deep learning model, A2SegNet, was trained and evaluated using three years of Sentinel-2 data, collected between 2019 and 2021. The experimental results show that this method is able to fully extract the spatial and spectral characteristics of crops, and its classification effect is significantly better than that of the baseline method, and it has better classification performance than other deep learning models. We cross verified the trained model on the test sets of different years through transfer learning in both spatiotemporal and spatial dimensions. Proving the effectiveness of the attention mechanism in the process of knowledge transfer, A2SegNet showed better adaptability. Full article
(This article belongs to the Section Remote Sensors)
►▼ Show Figures

Figure 1

16 pages, 4234 KiB  
Article
Estimation of Reference Evapotranspiration in a Semi-Arid Region of Mexico
by Gerardo Delgado-Ramírez, Martín Alejandro Bolaños-González, Abel Quevedo-Nolasco, Adolfo López-Pérez and Juan Estrada-Ávalos
Sensors 2023, 23(15), 7007; https://doi.org/10.3390/s23157007 - 7 Aug 2023
Cited by 3 | Viewed by 1996
Abstract
Reference evapotranspiration (ET0) is the first step in calculating crop irrigation demand, and numerous methods have been proposed to estimate this parameter. FAO-56 Penman–Monteith (PM) is the only standard method for defining and calculating ET0. However, it requires radiation, [...] Read more.
Reference evapotranspiration (ET0) is the first step in calculating crop irrigation demand, and numerous methods have been proposed to estimate this parameter. FAO-56 Penman–Monteith (PM) is the only standard method for defining and calculating ET0. However, it requires radiation, air temperature, atmospheric humidity, and wind speed data, limiting its application in regions where these data are unavailable; therefore, new alternatives are required. This study compared the accuracy of ET0 calculated with the Blaney–Criddle (BC) and Hargreaves–Samani (HS) methods versus PM using information from an automated weather station (AWS) and the NASA-POWER platform (NP) for different periods. The information collected corresponds to Module XII of the Lagunera Region Irrigation District 017, a semi-arid region in the North of Mexico. The HS method underestimated the reference evapotranspiration (ET0) by 5.5% compared to the PM method considering the total ET0 of the study period (26 February to 9 August 2021) and yielded the best fit in the different evaluation periods (daily, 5-day mean, and 5-day cumulative); the latter showed the best values of inferential parameters. The information about maximum and minimum temperatures from the NP platform was suitable for estimating ET0 using the HS equation. This data source is a suitable alternative, particularly in semi-arid regions with limited climatological data from weather stations. Full article
(This article belongs to the Special Issue Remote Sensing for Water Monitoring in Agricultural Management and Development)
►▼ Show Figures

Figure 1

16 pages, 1977 KiB  
Article
Analysis of the Correlation between Frontal Alpha Asymmetry of Electroencephalography and Short-Term Subjective Well-Being Changes
by Betty Wutzl, Kenji Leibnitz, Daichi Kominami, Yuichi Ohsita, Michiko Kaihotsu and Masayuki Murata
Sensors 2023, 23(15), 7006; https://doi.org/10.3390/s23157006 - 7 Aug 2023
Cited by 4 | Viewed by 1444
Abstract
Subjective well-being (SWB) describes how well people experience and evaluate their current condition. Previous studies with electroencephalography (EEG) have shown that SWB can be related to frontal alpha asymmetry (FAA). While those studies only considered a single SWB score for each experimental session, [...] Read more.
Subjective well-being (SWB) describes how well people experience and evaluate their current condition. Previous studies with electroencephalography (EEG) have shown that SWB can be related to frontal alpha asymmetry (FAA). While those studies only considered a single SWB score for each experimental session, our goal is to investigate such a correlation for individuals with a possibly different SWB every 60 or 30 s. Therefore, we conducted two experiments with 30 participants each. We used different temperature and humidity settings and asked the participants to periodically rate their SWB. We computed the FAA from EEG over different time intervals and associated the given SWB, leading to pairs of (FAA, SWB) values. After correcting the imbalance in the data with the Synthetic Minority Over-sampling Technique (SMOTE), we performed a linear regression and found a positive linear correlation between FAA and SWB. We also studied the best time interval sizes for determining FAA around each SWB score. We found that using an interval of 10 s before recording the SWB score yields the best results. Full article
(This article belongs to the Special Issue EEG Signal Processing for Sensing Technologies in Biomedical Engineering Applications)
►▼ Show Figures

Figure 1

13 pages, 5834 KiB  
Article
Ionospheric Weather at Two Starlink Launches during Two-Phase Geomagnetic Storms
by Tamara Gulyaeva, Manuel Hernández-Pajares and Iwona Stanislawska
Sensors 2023, 23(15), 7005; https://doi.org/10.3390/s23157005 - 7 Aug 2023
Cited by 4 | Viewed by 2213
Abstract
The launch of a series of Starlink internet satellites on 3 February 2022 (S-36), and 7 July 2022 (S-49), coincided with the development of two-phase geomagnetic storms. The first launch S-36 took place in the middle of the moderate two-phase space weather storm, [...] Read more.
The launch of a series of Starlink internet satellites on 3 February 2022 (S-36), and 7 July 2022 (S-49), coincided with the development of two-phase geomagnetic storms. The first launch S-36 took place in the middle of the moderate two-phase space weather storm, which induced significant technological consequences. After liftoff on 3 February at 18:13 UT, all Starlink satellites reached an initial altitude of 350 km in perigee and had to reach an altitude of ~550 km after the maneuver. However, 38 of 49 launched spacecrafts did not reach the planned altitude, left orbit due to increased drag and reentered the atmosphere on 8 February. A geomagnetic storm on 3–4 February 2022 has increased the density of the neutral atmosphere up to 50%, increasing drag of the satellites and dooming most of them. The second launch of S-49 at 13:11 UT on 7 July 2022 was successful at the peak of the two-phase geomagnetic storm. The global ionospheric maps of the total electron content (GIM-TEC) have been used to produce the ionospheric weather GIM-W index maps and Global Electron Content (GEC). We observed a GEC increment from 10 to 24% for the storm peak after the Starlink launch at both storms, accompanying the neutral density increase identified earlier. GIM-TEC maps are available with a lag (delay) of 1–2 days (real-time GIMs have a lag less than 15 min), so the GIMs forecast is required by the time of the launch. Comparisons of different GIMs forecast techniques are provided including the Center for Orbit Determination in Europe (CODE), Beijing (BADG and CASG) and IZMIRAN (JPRG) 1- and 2-day forecasts, and the Universitat Politecnica de Catalunya (UPC-ionSAT) forecast for 6, 12, 18, 24 and 48 h in advance. We present the results of the analysis of evolution of the ionospheric parameters during both events. The poor correspondence between observed and predicted GIM-TEC and GEC confirms an urgent need for the industry–science awareness of now-casting/forecasting/accessibility of GIM-TECs during the space weather events. Full article
(This article belongs to the Special Issue Advances in GNSS Positioning and GNSS Remote Sensing)
►▼ Show Figures

Figure 1

27 pages, 8049 KiB  
Article
Critical Examination of Distance-Gain-Size (DGS) Diagrams of Ultrasonic NDE with Sound Field Calculations
by Kanji Ono and Hang Su
Sensors 2023, 23(15), 7004; https://doi.org/10.3390/s23157004 - 7 Aug 2023
Viewed by 1378
Abstract
Ultrasonic non-destructive evaluation, which has been used widely, can detect and size critical flaws in structures. Advances in sound field calculations can further improve its effectiveness. Two calculation methods were used to characterize the relevant sound fields of an ultrasonic transducer and the [...] Read more.
Ultrasonic non-destructive evaluation, which has been used widely, can detect and size critical flaws in structures. Advances in sound field calculations can further improve its effectiveness. Two calculation methods were used to characterize the relevant sound fields of an ultrasonic transducer and the results were applied to construct and evaluate Distance-Gain-Size (DGS) diagrams, which are useful in flaw sizing. Two published DGS diagrams were found to be deficient because the backward diffraction path was overly simplified and the third one included an arbitrary procedure. Newly constructed DGS diagrams exhibited transducer size dependence, revealing another deficiency in the existing DGS diagrams. However, the extent of the present calculations must be expanded to provide a catalog of DGS diagrams to cover a wide range of practical needs. Details of the new construction method are presented, incorporating two-way diffraction procedures. Full article
(This article belongs to the Special Issue Structural Health Monitoring (SHM) and Nondestructive Evaluation (NDE) for Infrastructure and Manufacturing)
►▼ Show Figures

Figure 1

15 pages, 2178 KiB  
Article
Characterizing Soil Profile Salinization in Cotton Fields Using Landsat 8 Time-Series Data in Southern Xinjiang, China
by Jiaqiang Wang, Bifeng Hu, Weiyang Liu, Defang Luo and Jie Peng
Sensors 2023, 23(15), 7003; https://doi.org/10.3390/s23157003 - 7 Aug 2023
Cited by 2 | Viewed by 1702
Abstract
Soil salinization is a major obstacle to land productivity, crop yield and crop quality in arid areas and directly affects food security. Soil profile salt data are key for accurately determining irrigation volumes. To explore the potential for using Landsat 8 time-series data [...] Read more.
Soil salinization is a major obstacle to land productivity, crop yield and crop quality in arid areas and directly affects food security. Soil profile salt data are key for accurately determining irrigation volumes. To explore the potential for using Landsat 8 time-series data to monitor soil salinization, 172 Landsat 8 images from 2013 to 2019 were obtained from the Alar Reclamation Area of Xinjiang, northwest China. The multiyear extreme dataset was synthesized from the annual maximum or minimum values of 16 vegetation indices, which were combined with the soil conductivity of 540 samples from soil profiles at 0~0.375 m, 0~0.75 m and 0~1.00 m depths in 30 cotton fields with varying degrees of salinization as investigated by EM38-MK2. Three remote sensing monitoring models for soil conductivity at different depths were constructed using the Cubist method, and digital mapping was carried out. The results showed that the Cubist model of soil profile electrical conductivity from 0 to 0.375 m, 0 to 0.75 m and 0 to 1.00 m showed high prediction accuracy, and the determination coefficients of the prediction set were 0.80, 0.74 and 0.72, respectively. Therefore, it is feasible to use a multiyear extreme value for the vegetation index combined with a Cubist modeling method to monitor soil profile salinization at a regional scale. Full article
(This article belongs to the Special Issue Environmental Remote Sensing)
►▼ Show Figures

Figure 1

13 pages, 3653 KiB  
Article
Period Estimation of Spread Spectrum Codes Based on ResNet
by Han-Qing Gu, Xia-Xia Liu, Lu Xu, Yi-Jia Zhang and Zhe-Ming Lu
Sensors 2023, 23(15), 7002; https://doi.org/10.3390/s23157002 - 7 Aug 2023
Viewed by 1314
Abstract
In order to more effectively monitor and interfere with enemy signals, it is particularly important to accurately and efficiently identify the intercepted signals and estimate their parameters in the increasingly complex electromagnetic environment. Therefore, in non-cooperative situations, it is of great practical significance [...] Read more.
In order to more effectively monitor and interfere with enemy signals, it is particularly important to accurately and efficiently identify the intercepted signals and estimate their parameters in the increasingly complex electromagnetic environment. Therefore, in non-cooperative situations, it is of great practical significance to study how to accurately detect direct sequence spread spectrum (DSSS) signals in real time and estimate their parameters. The traditional time-delay correlation algorithm encounters the challenges such as peak energy leakage and false peak interference. As an alternative, this paper introduces a Pseudo-Noise (PN) code period estimation method utilizing a one-dimensional (1D) convolutional neural network based on the residual network (CNN-ResNet). This method transforms the problem of spread spectrum code period estimation into a multi-classification problem of spread spectrum code length estimation. Firstly, the In-phase/Quadrature(I/Q) two-way of the received DSSS signals is directly input into the CNN-ResNet model, which will automatically learn the characteristics of the DSSS signal with different PN code lengths and then estimate the PN code length. Simulation experiments are conducted using a data set with DSSS signals ranging from −20 to 10 dB in terms of signal-to-noise ratios (SNRs). Upon training and verifying the model using BPSK modulation, it is then put to the test with QPSK-modulated signals, and the estimation performance was analyzed through metrics such as loss function, accuracy rate, recall rate, and confusion matrix. The results demonstrate that the 1D CNN-ResNet proposed in this paper is capable of effectively estimating the PN code period of the non-cooperative DSSS signal, exhibiting robust generalization abilities. Full article
(This article belongs to the Special Issue Feature Papers in Communications Section 2023)
►▼ Show Figures

Figure 1

17 pages, 10332 KiB  
Article
An RFID Tag Movement Trajectory Tracking Method Based on Multiple RF Characteristics for Electronic Vehicle Identification ITS Applications
by Ruoyu Pan, Zhao Han, Tuo Liu, Honggang Wang, Jinyue Huang and Wenfeng Wang
Sensors 2023, 23(15), 7001; https://doi.org/10.3390/s23157001 - 7 Aug 2023
Cited by 1 | Viewed by 2247
Abstract
Intelligent transportation systems (ITS) urgently need to realize vehicle identification, dynamic monitoring, and traffic flow monitoring under high-speed motion conditions. Vehicle tracking based on radio frequency identification (RFID) and electronic vehicle identification (EVI) can obtain continuous observation data for a long period of [...] Read more.
Intelligent transportation systems (ITS) urgently need to realize vehicle identification, dynamic monitoring, and traffic flow monitoring under high-speed motion conditions. Vehicle tracking based on radio frequency identification (RFID) and electronic vehicle identification (EVI) can obtain continuous observation data for a long period of time, and the acquisition accuracy is relatively high, which is conducive to the discovery of rules. The data can provide key information for urban traffic decision-making research. In this paper, an RFID tag motion trajectory tracking method based on RF multiple features for ITS is proposed to analyze the movement trajectory of vehicles at important checkpoints. The method analyzes the accurate relationship between the RSSI, phase differences, and driving distances of the tag. It utilizes the information weight method to obtain the weights of multiple RF characteristics at different distances. Then, it calculates the center point of the common area where the vehicle may move under multi-antenna conditions, confirming the actual position of the vehicle. The experimental results show that the average positioning error of moving RFID tags based on dual-frequency signal phase differences and RSSI is less than 17 cm. This method can provide real-time, high-precision vehicle positioning and trajectory tracking solutions for ITS application scenarios such as parking guidance, unmanned vehicle route monitoring, and vehicle lane change detection. Full article
(This article belongs to the Special Issue Vehicle-to-Everything (V2X) Communication for Intelligent Transportation)
►▼ Show Figures

Figure 1

15 pages, 4959 KiB  
Article
1,2,3-Triazoles: Controlled Switches in Logic Gate Applications
by Debanjana Ghosh, Austin Atkinson, Jaclyn Gibson, Harini Subbaiahgari, Weihua Ming, Clifford Padgett, Karelle S. Aiken and Shainaz M. Landge
Sensors 2023, 23(15), 7000; https://doi.org/10.3390/s23157000 - 7 Aug 2023
Cited by 6 | Viewed by 2463
Abstract
A 1,2,3-triazole-based chemosensor is used for selective switching in logic gate operations through colorimetric and fluorometric response mechanisms. The molecular probe synthesized via “click chemistry” resulted in a non-fluorescent 1,4-diaryl-1,2,3-triazole with a phenol moiety (PTP). However, upon sensing fluoride, it TURNS [...] Read more.
A 1,2,3-triazole-based chemosensor is used for selective switching in logic gate operations through colorimetric and fluorometric response mechanisms. The molecular probe synthesized via “click chemistry” resulted in a non-fluorescent 1,4-diaryl-1,2,3-triazole with a phenol moiety (PTP). However, upon sensing fluoride, it TURNS ON the molecule’s fluorescence. The TURN-OFF order occurs through fluorescence quenching of the sensor when metal ions, e.g., Cu2+, and Zn2+, are added to the PTP-fluoride ensemble. A detailed characterization using Nuclear Magnetic Resonance (NMR) spectroscopy in a sequential titration study substantiated the photophysical characteristics of PTP through UV-Vis absorption and fluorescence profiles. A combination of fluorescence OFF-ON-OFF sequences provides evidence of 1,2,3-triazoles being controlled switches applicable to multimodal logic operations. The “INH” gate was constructed based on the fluorescence output of PTP when the inputs are F− and Zn2+. The “IMP” and “OR” gates were created on the colorimetric output responses using the probe’s absorption with multiple inputs (F− and Zn2+ or Cu2+). The PTP sensor is the best example of the “Write-Read-Erase-Read” mimic. Full article
(This article belongs to the Section Chemical Sensors)
►▼ Show Figures

Graphical abstract

23 pages, 10022 KiB  
Article
Research on Mechanical Equipment Fault Diagnosis Method Based on Deep Learning and Information Fusion
by Dongnian Jiang and Zhixuan Wang
Sensors 2023, 23(15), 6999; https://doi.org/10.3390/s23156999 - 7 Aug 2023
Cited by 4 | Viewed by 2338
Abstract
Solving the problem of the transmission of mechanical equipment is complicated, and the interconnection between equipment components in a complex industrial environment can easily lead to faults. A multi-scale-sensor information fusion method is proposed, overcoming the shortcomings of fault diagnosis methods based on [...] Read more.
Solving the problem of the transmission of mechanical equipment is complicated, and the interconnection between equipment components in a complex industrial environment can easily lead to faults. A multi-scale-sensor information fusion method is proposed, overcoming the shortcomings of fault diagnosis methods based on the analysis of one signal, in terms of diagnosis accuracy and efficiency. First, different sizes of convolution kernels are applied to extract multi-scale features from original signals using a multi-scale one-dimensional convolutional neural network (1DCNN); this not only improves the learning ability of the features but also enables the fine characterization of the features. Then, using Dempster–Shafer (DS) evidence theory, improved by multi-sensor information fusion strategy, the feature signals extracted by the multi-scale 1DCNN are fused to realize the fault detection and location. Finally, the experimental results of fault detection on a flash furnace show that the accuracy of the proposed method is more than 99.65% and has better fault diagnosis, which proves the feasibility and effectiveness of the proposed method. Full article
(This article belongs to the Section Fault Diagnosis & Sensors)
►▼ Show Figures

Figure 1

13 pages, 1600 KiB  
Article
An Investigation of Surface EMG Shorts-Derived Training Load during Treadmill Running
by Kurtis Ashcroft, Tony Robinson, Joan Condell, Victoria Penpraze, Andrew White and Stephen P. Bird
Sensors 2023, 23(15), 6998; https://doi.org/10.3390/s23156998 - 7 Aug 2023
Cited by 1 | Viewed by 1578
Abstract
The purpose of this study was two-fold: (1) to determine the sensitivity of the sEMG shorts-derived training load (sEMG-TL) during different running speeds; and (2) to investigate the relationship between the oxygen consumption, heart rate (HR), rating of perceived exertion (RPE), accelerometry-based PlayerLoad [...] Read more.
The purpose of this study was two-fold: (1) to determine the sensitivity of the sEMG shorts-derived training load (sEMG-TL) during different running speeds; and (2) to investigate the relationship between the oxygen consumption, heart rate (HR), rating of perceived exertion (RPE), accelerometry-based PlayerLoadTM (PL), and sEMG-TL during a running maximum oxygen uptake (V˙O2max) test. The study investigated ten healthy participants. On day one, participants performed a three-speed treadmill test at 8, 10, and 12 km·h−1 for 2 min at each speed. On day two, participants performed a V˙O2max test. Analysis of variance found significant differences in sEMG-TL at all three speeds (p < 0.05). A significantly weak positive relationship between sEMG-TL and %V˙O2max (r = 0.31, p < 0.05) was established, while significantly strong relationships for 8 out of 10 participants at the individual level (r = 0.72–0.97, p < 0.05) were found. Meanwhile, the accelerometry PL was not significantly related to %V˙O2max (p > 0.05) and only demonstrated significant correlations in 3 out of 10 participants at the individual level. Therefore, the sEMG shorts-derived training load was sensitive in detecting a work rate difference of at least 2 km·h−1. sEMG-TL may be an acceptable metric for the measurement of internal loads and could potentially be used as a surrogate for oxygen consumption. Full article
(This article belongs to the Special Issue Wearable Sensors for Health and Physiological Monitoring)
►▼ Show Figures

Figure 1

20 pages, 3420 KiB  
Article
Multi-Camera-Based Human Activity Recognition for Human–Robot Collaboration in Construction
by Youjin Jang, Inbae Jeong, Moein Younesi Heravi, Sajib Sarkar, Hyunkyu Shin and Yonghan Ahn
Sensors 2023, 23(15), 6997; https://doi.org/10.3390/s23156997 - 7 Aug 2023
Cited by 10 | Viewed by 4047
Abstract
As the use of construction robots continues to increase, ensuring safety and productivity while working alongside human workers becomes crucial. To prevent collisions, robots must recognize human behavior in close proximity. However, single, or RGB-depth cameras have limitations, such as detection failure, sensor [...] Read more.
As the use of construction robots continues to increase, ensuring safety and productivity while working alongside human workers becomes crucial. To prevent collisions, robots must recognize human behavior in close proximity. However, single, or RGB-depth cameras have limitations, such as detection failure, sensor malfunction, occlusions, unconstrained lighting, and motion blur. Therefore, this study proposes a multiple-camera approach for human activity recognition during human–robot collaborative activities in construction. The proposed approach employs a particle filter, to estimate the 3D human pose by fusing 2D joint locations extracted from multiple cameras and applies long short-term memory network (LSTM) to recognize ten activities associated with human and robot collaboration tasks in construction. The study compared the performance of human activity recognition models using one, two, three, and four cameras. Results showed that using multiple cameras enhances recognition performance, providing a more accurate and reliable means of identifying and differentiating between various activities. The results of this study are expected to contribute to the advancement of human activity recognition and utilization in human–robot collaboration in construction. Full article
(This article belongs to the Section Physical Sensors)
►▼ Show Figures

Figure 1

20 pages, 4009 KiB  
Article
A Feedback Control Sensing System of an Electrorheological Brake to Exert a Constant Pressing Force on an Object
by Tomasz Spotowski, Karol Osowski, Ireneusz Musiałek, Artur Olszak, Andrzej Kęsy, Zbigniew Kęsy and SeungBok Choi
Sensors 2023, 23(15), 6996; https://doi.org/10.3390/s23156996 - 7 Aug 2023
Cited by 3 | Viewed by 1433
Abstract
The paper presents the application of a strain gauge sensor and a viscous brake filled with an electrorheological (ER) fluid, which is a smart material with controlled rheological properties, by an electric field to the fluid domain. For experimental tests, a cylindrical viscous [...] Read more.
The paper presents the application of a strain gauge sensor and a viscous brake filled with an electrorheological (ER) fluid, which is a smart material with controlled rheological properties, by an electric field to the fluid domain. For experimental tests, a cylindrical viscous brake was designed. The tests were carried out on a test stand especially prepared for this purpose and suitable for the examination of the impact of the rotational speed of the input shaft and the value of the electric voltage supplied to the viscous brake on pressing forces, taking into account the ER fluid temperature and brake fluid filling level. On the basis of the experimental research results, a viscous brake control system to exert constant pressing forces with feedback from a strain gauge sensor, based on the programmable logic controller, was designed and implemented. This system, using its own control algorithm, ensured a control pressing force within the assumed range, both during the constant and follow-up control. The measurement results obtained during the tests of the viscous brake designed to exert a force were presented in the form of time courses, showing the changes of the pressing force, the electric voltage applied to the brake and the rotational speed of the brake input shaft. The developed ER fluid brake control system with feedback was tested for constant and follow-up control, taking into account the impact of the working fluid temperature. During the test it was possible to obtain a maximum pressing force equal to 50 N for an electric voltage limited to 2.5 kV. The resultant error was lower than 1 N, wherein the adjustment time after changing the desired value of the force was around 1.5 s. The correct operation of both the brake and the control system, as well as the compatibility of the pressing force value and time adjustment, were determined. The main technical contribution described in this article is the design of a new type of DECPF and a new method for its control with the use of a specifically programmed programmable logic controller which simulates the proportional-integral controllers’ operation. Full article
(This article belongs to the Special Issue Editorial Board Members' Collection Series: Magnetic-Responsive Smart Materials and Applications for Sensors and Transducers)
►▼ Show Figures

Figure 1

13 pages, 5772 KiB  
Article
Colorimetric Chemosensor for Cu2+ and Fe3+ Based on a meso-Triphenylamine-BODIPY Derivative
by Sónia C. S. Pinto, Raquel C. R. Gonçalves, Susana P. G. Costa and M. Manuela M. Raposo
Sensors 2023, 23(15), 6995; https://doi.org/10.3390/s23156995 - 7 Aug 2023
Cited by 4 | Viewed by 1495
Abstract
Optical chemosensors are a practical tool for the detection and quantification of important analytes in biological and environmental fields, such as Cu2+ and Fe3+. To the best of our knowledge, a BODIPY derivative capable of detecting Cu2+ and Fe [...] Read more.
Optical chemosensors are a practical tool for the detection and quantification of important analytes in biological and environmental fields, such as Cu2+ and Fe3+. To the best of our knowledge, a BODIPY derivative capable of detecting Cu2+ and Fe3+ simultaneously through a colorimetric response has not yet been described in the literature. In this work, a meso-triphenylamine-BODIPY derivative is reported for the highly selective detection of Cu2+ and Fe3+. In the preliminary chemosensing study, this compound showed a significant color change from yellow to blue–green in the presence of Cu2+ and Fe3+. With only one equivalent of cation, a change in the absorption band of the compound and the appearance of a new band around 700 nm were observed. Furthermore, only 10 equivalents of Cu2+/Fe3+ were needed to reach the absorption plateau in the UV-visible titrations. Compound 1 showed excellent sensitivity toward Cu2+ and Fe3+ detection, with LODs of 0.63 µM and 1.06 µM, respectively. The binding constant calculation indicated a strong complexation between compound 1 and Cu2+/Fe3+ ions. The 1H and 19F NMR titrations showed that an increasing concentration of cations induced a broadening and shifting of the aromatic region peaks, as well as the disappearance of the original fluorine peaks of the BODIPY core, which suggests that the ligand–metal (1:2) interaction may occur through the triphenylamino group and the BODIPY core. Full article
(This article belongs to the Special Issue Colorimetric Sensors: Methods and Applications)
►▼ Show Figures

Figure 1

24 pages, 6678 KiB  
Article
Acoustic Emission-Based Analysis of Damage Mechanisms in Filament Wound Fiber Reinforced Composite Tubes
by Parsa Ghahremani, Mehdi Ahmadi Najafabadi, Sajad Alimirzaei and Mohammad Fotouhi
Sensors 2023, 23(15), 6994; https://doi.org/10.3390/s23156994 - 7 Aug 2023
Viewed by 1756
Abstract
This study investigates the mechanical behavior and damage mechanisms of thin-walled glass/epoxy filament wound tubes under quasi-static lateral loads. The novelty is that the tubes are reinforced in critical areas using strip composite patches to provide a topology-optimized tube, and their damage mechanisms [...] Read more.
This study investigates the mechanical behavior and damage mechanisms of thin-walled glass/epoxy filament wound tubes under quasi-static lateral loads. The novelty is that the tubes are reinforced in critical areas using strip composite patches to provide a topology-optimized tube, and their damage mechanisms and mechanical performance are compared to that of un-reinforced (reference) tubes. To detect the types of damage mechanisms and their progression, the Acoustic Emission (AE) method is employed, accompanied by data clustering analysis. The loading conditions are simulated using the finite element method, and the results are validated through experimental testing. The findings confirm that the inclusion of reinforcing patches improves the stress distribution, leading to enhanced load carrying capacity, stiffness, and energy absorption. Compared to the reference tubes, the reinforced tubes exhibit a remarkable increase of 23.25% in the load carrying capacity, 33.46% in the tube’s stiffness, and 23.67% in energy absorption. The analysis of the AE results reveals that both the reference and reinforced tubes experience damage mechanisms such as matrix cracking, fiber-matrix debonding, delamination, and fiber fracture. However, after matrix cracking, delamination becomes dominant in the reinforced tubes, while fiber failure prevails in the reference tubes. Moreover, by combining the AE energy and mechanical energy using the Sentry function, it is observed that the reinforced tubes exhibit a lower rate of damage propagation, indicating superior resistance to damage propagation compared to the reference tubes. Full article
(This article belongs to the Special Issue Smart Sensing in Structural Health Monitoring of Advanced Composite Structures)
►▼ Show Figures

Figure 1

16 pages, 3728 KiB  
Article
Designing a Low-Cost System to Monitor the Structural Behavior of Street Lighting Poles in Smart Cities
by Antonino Quattrocchi, Francesco Martella, Valeria Lukaj, Rocco De Leo, Massimo Villari and Roberto Montanini
Sensors 2023, 23(15), 6993; https://doi.org/10.3390/s23156993 - 7 Aug 2023
Cited by 3 | Viewed by 1969
Abstract
The structural collapse of a street lighting pole represents an aspect that is often underestimated and unpredictable, but of relevant importance for the safety of people and things. These events are complex to evaluate since several sources of damage are involved. In addition, [...] Read more.
The structural collapse of a street lighting pole represents an aspect that is often underestimated and unpredictable, but of relevant importance for the safety of people and things. These events are complex to evaluate since several sources of damage are involved. In addition, traditional inspection methods are ineffective, do not correctly quantify the residual life of poles, and are inefficient, requiring enormous costs associated with the vastness of elements to be investigated. An advantageous alternative is to adopt a distributed type of Structural Health Monitoring (SHM) technique based on the Internet of Things (IoT). This paper proposes the design of a low-cost system, which is also easy to integrate in current infrastructures, for monitoring the structural behavior of street lighting poles in Smart Cities. At the same time, this device collects previous structural information and offers some secondary functionalities related to its application, such as meteorological information. Furthermore, this paper intends to lay the foundations for the development of a method that is able to avoid the collapse of the poles. Specifically, the implementation phase is described in the aspects concerning low-cost devices and sensors for data acquisition and transmission and the strategies of information technologies (ITs), such as Cloud/Edge approaches, for storing, processing and presenting the achieved measurements. Finally, an experimental evaluation of the metrological performance of the sensing features of this system is reported. The main results highlight that the employment of low-cost equipment and open-source software has a double implication. On one hand, they entail advantages such as limited costs and flexibility to accommodate the specific necessities of the interested user. On the other hand, the used sensors require an indispensable metrological evaluation of their performance due to encountered issues relating to calibration, reliability and uncertainty. Full article
(This article belongs to the Section Internet of Things)
►▼ Show Figures

Figure 1

19 pages, 15305 KiB  
Article
Neural-Network-Based Localization Method for Wi-Fi Fingerprint Indoor Localization
by Hui Zhu, Li Cheng, Xuan Li and Haiwen Yuan
Sensors 2023, 23(15), 6992; https://doi.org/10.3390/s23156992 - 7 Aug 2023
Cited by 4 | Viewed by 3138
Abstract
Despite the high demand for Internet location service applications, Wi-Fi indoor localization often suffers from time- and labor-intensive data collection processes. This study proposes a novel indoor localization model that utilizes fingerprinting technology based on a convolutional neural network to address this issue. [...] Read more.
Despite the high demand for Internet location service applications, Wi-Fi indoor localization often suffers from time- and labor-intensive data collection processes. This study proposes a novel indoor localization model that utilizes fingerprinting technology based on a convolutional neural network to address this issue. The aim is to enhance Wi-Fi indoor localization by streamlining the data collection process. The proposed indoor localization model leverages a 3D ray-tracing technique to simulate the wireless received signal strength intensity (RSSI) across the field. By incorporating this advanced technique, the model aims to improve the accuracy and efficiency of Wi-Fi indoor localization. In addition, an RSSI heatmap fingerprint dataset generated from the ray-tracing simulation is trained on the proposed indoor localization model. To optimize and evaluate the model’s performance in real-world scenarios, experiments were conducted using simulated datasets obtained from the publicly available databases of UJIIndoorLoc and Wireless InSite. The results show that the new approach solves the problem of resource limitation while achieving a verification accuracy of up to 99.09%. Full article
(This article belongs to the Section Navigation and Positioning)
►▼ Show Figures

Figure 1

20 pages, 477 KiB  
Article
On Scalability of FDD-Based Cell-Free Massive MIMO Framework
by Beenish Hassan, Sobia Baig and Saad Aslam
Sensors 2023, 23(15), 6991; https://doi.org/10.3390/s23156991 - 7 Aug 2023
Viewed by 1489
Abstract
Cell-free massive multiple-input multiple-output (MIMO) systems have the potential of providing joint services, including joint initial access, efficient clustering of access points (APs), and pilot allocation to user equipment (UEs) over large coverage areas with reduced interference. In cell-free massive MIMO, a large [...] Read more.
Cell-free massive multiple-input multiple-output (MIMO) systems have the potential of providing joint services, including joint initial access, efficient clustering of access points (APs), and pilot allocation to user equipment (UEs) over large coverage areas with reduced interference. In cell-free massive MIMO, a large coverage area corresponds to the provision and maintenance of the scalable quality of service requirements for an infinitely large number of UEs. The research in cell-free massive MIMO is mostly focused on time division duplex mode due to the availability of channel reciprocity which aids in avoiding feedback overhead. However, the frequency division duplex (FDD) protocol still dominates the current wireless standards, and the provision of angle reciprocity aids in reducing this overhead. The challenge of providing a scalable cell-free massive MIMO system in an FDD setting is also prevalent, since computational complexity regarding signal processing tasks, such as channel estimation, precoding/combining, and power allocation, becomes prohibitively high with an increase in the number of UEs. In this work, we consider an FDD-based scalable cell-free network with angular reciprocity and a dynamic cooperation clustering approach. We have proposed scalability for our FDD cell-free and performed a comparative analysis with reference to channel estimation, power allocation, and precoding/combining techniques. We present expressions for scalable spectral efficiency, angle-based precoding/combining schemes and provide a comparison of overhead between conventional and scalable angle-based estimation as well as combining schemes. Simulations confirm that the proposed scalable cell-free network based on an FDD scheme outperforms the conventional matched filtering scheme based on scalable precoding/combining schemes. The angle-based LP-MMSE in the FDD cell-free network provides 14.3% improvement in spectral efficiency and 11.11% improvement in energy efficiency compared to the scalable MF scheme. Full article
(This article belongs to the Section Communications)
►▼ Show Figures

Figure 1

22 pages, 7006 KiB  
Article
Cyclic Generative Attention-Adversarial Network for Low-Light Image Enhancement
by Tong Zhen, Daxin Peng and Zhihui Li
Sensors 2023, 23(15), 6990; https://doi.org/10.3390/s23156990 - 7 Aug 2023
Cited by 1 | Viewed by 1625
Abstract
Images captured under complex conditions frequently have low quality, and image performance obtained under low-light conditions is poor and does not satisfy subsequent engineering processing. The goal of low-light image enhancement is to restore low-light images to normal illumination levels. Although many methods [...] Read more.
Images captured under complex conditions frequently have low quality, and image performance obtained under low-light conditions is poor and does not satisfy subsequent engineering processing. The goal of low-light image enhancement is to restore low-light images to normal illumination levels. Although many methods have emerged in this field, they are inadequate for dealing with noise, color deviation, and exposure issues. To address these issues, we present CGAAN, a new unsupervised generative adversarial network that combines a new attention module and a new normalization function based on cycle generative adversarial networks and employs a global–local discriminator trained with unpaired low-light and normal-light images and stylized region loss. Our attention generates feature maps via global and average pooling, and the weights of different feature maps are calculated by multiplying learnable parameters and feature maps in the appropriate order. These weights indicate the significance of corresponding features. Specifically, our attention is a feature map attention mechanism that improves the network’s feature-extraction ability by distinguishing the normal light domain from the low-light domain to obtain an attention map to solve the color bias and exposure problems. The style region loss guides the network to more effectively eliminate the effects of noise. The new normalization function we present preserves more semantic information while normalizing the image, which can guide the model to recover more details and improve image quality even further. The experimental results demonstrate that the proposed method can produce good results that are useful for practical applications. Full article
(This article belongs to the Section Optical Sensors)
►▼ Show Figures

Figure 1

19 pages, 8546 KiB  
Article
A Miniaturized Tri-Band Implantable Antenna for ISM/WMTS/Lower UWB/Wi-Fi Frequencies
by Anupma Gupta, Vipan Kumar, Shonak Bansal, Mohammed H. Alsharif, Abu Jahid and Ho-Shin Cho
Sensors 2023, 23(15), 6989; https://doi.org/10.3390/s23156989 - 7 Aug 2023
Cited by 14 | Viewed by 1784
Abstract
This study aims to design a compact antenna structure suitable for implantable devices, with a broad frequency range covering various bands such as the Industrial Scientific and Medical band (868–868.6 MHz, 902–928 MHz, 5.725–5.875 GHz), the Wireless Medical Telemetry Service (WMTS) band, a [...] Read more.
This study aims to design a compact antenna structure suitable for implantable devices, with a broad frequency range covering various bands such as the Industrial Scientific and Medical band (868–868.6 MHz, 902–928 MHz, 5.725–5.875 GHz), the Wireless Medical Telemetry Service (WMTS) band, a subset of the unlicensed 3.5–4.5 GHz ultra-wideband (UWB) that is free of interference, and various Wi-Fi spectra (3.6 GHz, 4.9 GHz, 5 GHz, 5.9 GHz, 6 GHz). The antenna supports both low and high frequencies for efficient data transfer and is compatible with various communication technologies. The antenna features an asynchronous-meandered radiator, a parasitic patch, and an open-ended square ring-shaped ground plane. The antenna is deployed deep inside the muscle layer of a rectangular phantom below the skin and fat layer at a depth of 7 mm for numerical simulation. Furthermore, the antenna is deployed in a cylindrical phantom and bent to check the suitability for different organs. A prototype of the antenna is created, and its reflection coefficient and radiation patterns are measured in fresh pork tissue. The proposed antenna is considered a suitable candidate for implantable technology compared to other designs reported in the literature. It can be observed that the proposed antenna in this study has the smallest volume (75 mm3) and widest bandwidth (181.8% for 0.86 GHz, 9.58% for 1.43 GHz, and 285.7% for the UWB subset and Wi-Fi). It also has the highest gain (−26 dBi for ISM, −14 dBi for WMTS, and −14.2 dBi for UWB subset and Wi-Fi) compared to other antennas in the literature. In addition, the SAR values for the proposed antenna are well below the safety limits prescribed by IEEE Std C95.1-1999, with SAR values of 0.409 W/Kg for 0.8 GHz, 0.534 W/Kg for 1.43 GHz, 0.529 W/Kg for 3.5 GHz, and 0.665 W/Kg for 5.5 GHz when the applied input power is 10 mW. Overall, the proposed antenna in this study demonstrates superior performance compared to existing tri-band implantable antennas in terms of size, bandwidth, gain, and SAR values. Full article
(This article belongs to the Special Issue Smart Antennas for Future Communications)
►▼ Show Figures

Figure 1

15 pages, 3672 KiB  
Article
A Comparative Study of the Typing Performance of Two Mid-Air Text Input Methods in Virtual Environments
by Yueyang Wang, Yahui Wang, Xiaoqiong Li, Chengyi Zhao, Ning Ma and Zixuan Guo
Sensors 2023, 23(15), 6988; https://doi.org/10.3390/s23156988 - 6 Aug 2023
Cited by 3 | Viewed by 2263
Abstract
Inputting text is a prevalent requirement among various virtual reality (VR) applications, including VR-based remote collaboration. In order to eliminate the need for complex rules and handheld devices for typing within virtual environments, researchers have proposed two mid-air input methods—the trace and tap [...] Read more.
Inputting text is a prevalent requirement among various virtual reality (VR) applications, including VR-based remote collaboration. In order to eliminate the need for complex rules and handheld devices for typing within virtual environments, researchers have proposed two mid-air input methods—the trace and tap methods. However, the specific impact of these input methods on performance in VR remains unknown. In this study, typing tasks were used to compare the performance, subjective report, and cognitive load of two mid-air input methods in VR. While the trace input method was more efficient and novel, it also entailed greater frustration and cognitive workload. Fortunately, the levels of frustration and cognitive load associated with the trace input method could be reduced to the same level as those of the tap input method via familiarity with VR. These findings could aid the design of virtual input methods, particularly for VR applications with varying text input demands. Full article
(This article belongs to the Section Intelligent Sensors)
►▼ Show Figures

Figure 1

24 pages, 8459 KiB  
Article
Robust Localization of Industrial Park UGV and Prior Map Maintenance
by Fanrui Luo, Zhenyu Liu, Fengshan Zou, Mingmin Liu, Yang Cheng and Xiaoyu Li
Sensors 2023, 23(15), 6987; https://doi.org/10.3390/s23156987 - 6 Aug 2023
Cited by 2 | Viewed by 1676
Abstract
The precise localization of unmanned ground vehicles (UGVs) in industrial parks without prior GPS measurements presents a significant challenge. Simultaneous localization and mapping (SLAM) techniques can address this challenge by capturing environmental features, using sensors for real-time UGV localization. In order to increase [...] Read more.
The precise localization of unmanned ground vehicles (UGVs) in industrial parks without prior GPS measurements presents a significant challenge. Simultaneous localization and mapping (SLAM) techniques can address this challenge by capturing environmental features, using sensors for real-time UGV localization. In order to increase the real-time localization accuracy and efficiency of UGVs, and to improve the robustness of UGVs’ odometry within industrial parks—thereby addressing issues related to UGVs’ motion control discontinuity and odometry drift—this paper proposes a tightly coupled LiDAR-IMU odometry method based on FAST-LIO2, integrating ground constraints and a novel feature extraction method. Additionally, a novel maintenance method of prior maps is proposed. The front-end module acquires the prior pose of the UGV by combining the detection and correction of relocation with point cloud registration. Then, the proposed maintenance method of prior maps is used to hierarchically and partitionally segregate and perform the real-time maintenance of the prior maps. At the back-end, real-time localization is achieved by the proposed tightly coupled LiDAR-IMU odometry that incorporates ground constraints. Furthermore, a feature extraction method based on the bidirectional-projection plane slope difference filter is proposed, enabling efficient and accurate point cloud feature extraction for edge, planar and ground points. Finally, the proposed method is evaluated, using self-collected datasets from industrial parks and the KITTI dataset. Our experimental results demonstrate that, compared to FAST-LIO2 and FAST-LIO2 with the curvature feature extraction method, the proposed method improved the odometry accuracy by 30.19% and 48.24% on the KITTI dataset. The efficiency of odometry was improved by 56.72% and 40.06%. When leveraging prior maps, the UGV achieved centimeter-level localization accuracy. The localization accuracy of the proposed method was improved by 46.367% compared to FAST-LIO2 on self-collected datasets, and the located efficiency was improved by 32.33%. The z-axis-located accuracy of the proposed method reached millimeter-level accuracy. The proposed prior map maintenance method reduced RAM usage by 64% compared to traditional methods. Full article
(This article belongs to the Special Issue Multi-Sensor Technology for Target Tracking, Positioning and Navigation)
►▼ Show Figures

Figure 1

21 pages, 1262 KiB  
Review
Multimodal Federated Learning: A Survey
by Liwei Che, Jiaqi Wang, Yao Zhou and Fenglong Ma
Sensors 2023, 23(15), 6986; https://doi.org/10.3390/s23156986 - 6 Aug 2023
Cited by 28 | Viewed by 8606
Abstract
Federated learning (FL), which provides a collaborative training scheme for distributed data sources with privacy concerns, has become a burgeoning and attractive research area. Most existing FL studies focus on taking unimodal data, such as image and text, as the model input and [...] Read more.
Federated learning (FL), which provides a collaborative training scheme for distributed data sources with privacy concerns, has become a burgeoning and attractive research area. Most existing FL studies focus on taking unimodal data, such as image and text, as the model input and resolving the heterogeneity challenge, i.e., the challenge of non-identical distribution (non-IID) caused by a data distribution imbalance related to data labels and data amount. In real-world applications, data are usually described by multiple modalities. However, to the best of our knowledge, only a handful of studies have been conducted to improve system performance utilizing multimodal data. In this survey paper, we identify the significance of this emerging research topic of multimodal federated learning (MFL) and present a literature review on the state-of-art MFL methods. Furthermore, we categorize multimodal federated learning into congruent and incongruent multimodal federated learning based on whether all clients possess the same modal combinations. We investigate the feasible application tasks and related benchmarks for MFL. Lastly, we summarize the promising directions and fundamental challenges in this field for future research. Full article
(This article belongs to the Section Intelligent Sensors)
►▼ Show Figures

Figure 1

13 pages, 48963 KiB  
Article
A Novel Monopole Ultra-Wide-Band Multiple-Input Multiple-Output Antenna with Triple-Notched Characteristics for Enhanced Wireless Communication and Portable Systems
by Shahid Basir, Ubaid Ur Rahman Qureshi, Fazal Subhan, Muhammad Asghar Khan, Syed Agha Hassnain Mohsan, Yazeed Yasin Ghadi, Khmaies Ouahada, Habib Hamam and Fazal Noor
Sensors 2023, 23(15), 6985; https://doi.org/10.3390/s23156985 - 6 Aug 2023
Cited by 5 | Viewed by 1637
Abstract
This study introduces a monopole 4 × 4 Ultra-Wide-Band (UWB) Multiple-Input Multiple-Output (MIMO) antenna system with a novel structure and outstanding performance. The proposed design has triple-notched characteristics due to CSRR etching and a C-shaped curve. The notching occurs in 4.5 GHz, 5.5 [...] Read more.
This study introduces a monopole 4 × 4 Ultra-Wide-Band (UWB) Multiple-Input Multiple-Output (MIMO) antenna system with a novel structure and outstanding performance. The proposed design has triple-notched characteristics due to CSRR etching and a C-shaped curve. The notching occurs in 4.5 GHz, 5.5 GHz, and 8.8 GHz frequencies in the C-band, WLAN band, and satellite network, respectively. Complementary Split-Ring Resonators (CSRR) are etched at the feed line and ground plane, and a C-shaped curve is used to reduce interference between the ultra-wide band and narrowband. The mutual coupling of CSRR enables the MIMO architecture to achieve high isolation and polarisation diversity. With prototype dimensions of (60.4 × 60.4) mm2, the proposed antenna design is small. The simulated and measured results show good agreement, indicating the effectiveness of the UWB-MIMO antenna for wireless communication and portable systems. Full article
(This article belongs to the Special Issue Advanced Millimeter Wave Antenna Systems for 5G and beyond 5G Wireless Communications)
►▼ Show Figures

Figure 1

12 pages, 2662 KiB  
Communication
Direction of Arrival Estimation of Coherent Wideband Sources Using Nested Array
by Yawei Tang, Weiming Deng, Jianfeng Li and Xiaofei Zhang
Sensors 2023, 23(15), 6984; https://doi.org/10.3390/s23156984 - 6 Aug 2023
Viewed by 1489
Abstract
Due to their ability to achieve higher DOA estimation accuracy and larger degrees of freedom (DOF) using a fixed number of antennas, sparse arrays, etc., nested and coprime arrays have attracted a lot of attention in relation to research into direction of arrival [...] Read more.
Due to their ability to achieve higher DOA estimation accuracy and larger degrees of freedom (DOF) using a fixed number of antennas, sparse arrays, etc., nested and coprime arrays have attracted a lot of attention in relation to research into direction of arrival (DOA) estimation. However, the usage of the sparse array is based on the assumption that the signals are independent of each other, which is hard to guarantee in practice due to the complex propagation environment. To address the challenge of sparse arrays struggling to handle coherent wideband signals, we propose the following method. Firstly, we exploit the coherent signal subspace method (CSSM) to focus the wideband signals on the reference frequency and assist in the decorrelation process, which can be implemented without any pre-estimations. Then, we virtualize the covariance matrix of sparse array due to the decorrelation operation. Next, an enhanced spatial smoothing algorithm is applied to make full use of the information available in the data covariance matrix, as well as to improve the decorrelation effect, after which stage the multiple signal classification (MUSIC) algorithm is used to obtain DOA estimations. In the simulation, with reference to the root mean square error (RMSE) that varies in tandem with the signal-to-noise ratio (SNR), the algorithm achieves satisfactory results compared to other state-of-the-art algorithms, including sparse arrays using the traditional incoherent signal subspace method (ISSM), the coherent signal subspace method (CSSM), spatial smoothing algorithms, etc. Furthermore, the proposed method is also validated via real data tests, and the error value is only 0.2 degrees in real data tests, which is lower than those of the other methods in real data tests. Full article
(This article belongs to the Special Issue Robust Parameter Estimation with Sensor Arrays in Complex Electromagnetic Environments)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-364
Previous Issue
Next Issue
Back to TopTop