1. Introduction
The amount of arable land all over the world is constantly decreasing due to increasing population and industrialization [
1]. Approximately 70% more food is needed to feed the overpopulation [
2]. Especially in Asia and Africa, where producers own small lands, agricultural lands are under pressure to produce for human nutrition [
3]. As global food demand increases, stricter environmental protection regulations and sustainability rules are put forward to prevent agricultural expansion and deforestation [
4]. Today, there is no opportunity to increase the agricultural areas, and the per capita agricultural area is decreasing due to the increase in human population.
To date, many methods such as increasing the yield with breeding techniques, using genetically modified organisms, and application of chemical fertilizers and pesticides are used in order to provide the food needed for the increasing world population. While each method has its own advantages and disadvantages, there is still a need for production techniques that are not harmful for ecology and comply with the principles of sustainable agriculture. One of the most effective methods to increase the productivity and use of labor in an area is to use the soil intensively by obtaining more than one product per year, especially in places where the climate is suitable. This can be achieved by cultivation of several annual crops that mature in a short time together or in succession [
5].
Agricultural diversity and its effective management are also of great importance for sustainable agriculture [
6]. Sustainable agriculture aims to use nature as a model for designing agricultural systems. Intercropping is a diversified farming practice included in sustainable farming techniques [
7] and is a method to increase the diversity in the agro-ecosystem [
8]. Intercropping refers to the cultivation of two or more plants together in the same place and at the same time [
9,
10]. Intercropping has many benefits such as increasing the use of environmental resources, obtaining more efficiency compared to sole cropping, providing disease, pest and weed control, protecting soil fertility that improves product quality, preventing erosion, increasing land use efficiency in low-input agricultural systems. It can also reduce the risk factor for farmers since it provides more stable yields [
10,
11,
12]. The species to be grown with intercropping should not adversely affect the growth of the main crop, should not compete with the main crop, and should be a species that provides an advantage in the cultivation of the main crop and generates more income with the main crop from the unit area than the monoculture [
8].
Cauliflower (Brassica oleraceae var. botrytis) belongs to the Brassicaceae family, and is a good source of minerals, vitamins, phytochemicals, and carbohydrates. Similarly, leaf lettuce (Lactuca sativa L. var. crispa) also contains necessary elements for human nutrition. Both cauliflower and lettuce are cool climate vegetables and are grown widely in Turkey with a total annual production of 235,000 tons (9100 ha) and 234,000 tons (9600 ha), respectively. It is necessary to increase the yield to be obtained from the unit area due to the limited or even decrease in the possibilities of expanding the agricultural lands. Therefore, when considering the increase or diversification of the yield to be obtained from the unit area, cultivation methods such as intercropping come to the fore.
Nitrogen fertilization is indispensable for plants since it improves the vegetative growth, leaf area index, number of leaves, chlorophyll content of leaves, and photosynthesis in plants. Parallel to the increase in photosynthesis, it has a positive effect on yield and quality [
13]. For cauliflower, nitrogen fertilization is very crucial for the development of well, tight, and white heads [
14]. While low levels of nitrogen results in insufficient leaf and small head formation, in the cases where nitrogen is high, browning of the head color, whipping in the cauliflower leaves, forming a leafy and loose head and hole stem occur [
15]. Insufficient or excessive fertilizer applications will cause economic losses in agricultural production, and especially excessive nitrogen application causes serious environmental problems over time [
13]. There are many studies examining the effects of nitrogen fertilization [
16,
17] and intercropping practices [
18] on the yield and quality of cauliflower. However, studies on the effect of nitrogen fertilization and intercropping together in cauliflower are limited. The aim of this study is to increase agricultural profitability and sustainability by increasing the crop production obtained from the unit area by using the same field and the same inputs. Therefore, this study was carried out to determine the yield and land use efficiency in cauliflower+leaf lettuce intercropping systems.
3. Results
Growth and yield parameters of cauliflower were found to be significantly affected by nitrogen fertilization, while cropping treatments had no significant effect (
p > 0.05) on these parameters (
Table 2 and
Table 3). Nitrogen application very significantly affect the plant weight (
p < 0.001) and the highest plant weight was achieved when 240 kg ha
−1 nitrogen was applied in both monocropping (MC) and intercropping (IC) systems in both years. Nitrogen × cropping system interaction was found to be not significant for plant weight. When 240 kg ha
−1 nitrogen was applied, two-year average plant weight values of the cauliflower for the MC and IC treatments were 1127.01 g plant
−1 and 11,120.19 g plant
−1, respectively. Although plant weight slightly decreased in the IC system (by 0.61%) compared to MC for cauliflower, the IC system may still be considered more productive since the total aboveground biomass was higher in IC (1599.35 g plant
−1: cauliflower (1120.19 g plant
−1) and lettuce (389.16 g plant
−1)) than in the MC cauliflower (1127.07 g plant
−1) and MC lettuce (440.14 g plant
−1) for the same total area and fertilizer amount.
Similarly, the highest leaf weight, head diameter, head height and head weight for cauliflower were obtained when 240 N kg ha
−1 was applied for both MC and IC treatments (
Table 2 and
Table 3). Overall, the highest head weights were obtained from 240 kg N ha
−1 application dose in both systems and for both years. Nitrogen × cropping system interaction was found not significant for head weight for both years. The cauliflower head weight was used for the yield calculations and the yield values for both MC and IC treatments are given in
Figure 3. For the 1st year, the highest yield (18.1 ton ha
−1) was achieved when 240 kg N ha
−1 was applied in the MC system while the lowest yield (13.7 ton ha
−1) for cauliflower was obtained in the IC system with 160 kg N ha
−1 application. On the other hand, for the 2nd year, the highest yield was achieved when 240 kg N ha
−1 was applied and there was no significant difference between cropping systems (18.9 ton ha
−1 for both). When two-year average yield values are considered, the regression analysis shows that when 234.7 kg N ha
−1 nitrogen is applied a yield of 18.5 ton ha
−1 can be achieved for the MC system and a nitrogen application of 176.6 kg N ha
−1 results in a yield value of 18.2 ton ha
−1 for the IC system (
Figure 4). For lettuce the yield was calculated from the plant weight. Nitrogen applications significantly affected the plant weight (
p < 0.001) of leaf lettuce in intercropping system for both years (
Table 4). The highest plant weights for lettuce were obtained from the MC system for both years (542.65 g plant
−1 in 1st year and 337.63 in 2nd year). Cropping methods did not significantly affect the plant weight, leaf dry matter ratio, and stem diameter. Nitrogen × cropping system interaction was not significant for these parameters.
Figure 5 shows that the effect of different nitrogen dose applications and cropping methods on leaf lettuce yield were statistically significant (
p < 0.001) in both years. Yield of leaf lettuce was the highest in the MC system in both years (90.5 ton ha
−1 and 56.3 ton ha
−1). Although the plant weight was found to be not affected by the cropping system (
Table 4), the yield was lower in the case of IC since the number of plants per unit area decreased. However, the IC system is still an economical, ecological, and sustainable model when the total yield is considered. For the same total area and fertilizer amount (240 kg N ha
−1), two-year average yield for MC cauliflower was 18.5 ton ha
−1; on the other hand, the total yield for the IC system was 50.7 ton ha
−1 (18.2 ton ha
−1 (cauliflower) + 32.5 ton ha
−1 (lettuce)) (
Figure 3 and
Figure 5). An even higher yield (53.4 ton ha
−1 (18.2 ton ha
−1 (cauliflower) + 35.2 ton ha
−1 (lettuce)) could be achieved if the optimum fertilizer amount for cauliflower (176.6 kg N ha
−1) was applied (
Figure 4). As seen in the results of the research, only 18.5 tons of cauliflower product is obtained from the area where cauliflower is grown MC, while a total of 50.7 tons of product is obtained for 32.5 tons of lettuce plant in addition to the cauliflower product with the same fertilizer application in IC. When you take into account the nitrogen fertilizer used per hectare, 18.2 tons of product is obtained with 240 kg of nitrogenous fertilizer, while an additional 35.2 tons of product is taken with the same fertilizer without any change in cauliflower yield, the use of nitrogen fertilizer causes about 2.71 times more effective use. Especially considering that nitrogen fertilizer is washed away from the soil, co-sowing and washing loss are reduced, as well as effective use of nitrogen fertilizer, resulting in a reduction in production costs. Considering the two-year soil results, the increase in soil organic matter causes an increase in the bacterial activity of the soil, and this positive effect causes an increase in the usefulness of the nutrients. As seen in the results, we can see that the biodiversity increases and the availability of nutrients (P, K, Mgi Zn, Fe, Mn, Cu) increases as it is directly proportional to the increase in the number of plants per unit area and the total amount of C.
Table 2 shows that chlorophyll reading value of cauliflower was significantly affected by the dose of nitrogen in both IC and MC. When 240 kg ha
−1 nitrogen was applied two-year average chlorophyll values of cauliflower were 66.17 and 66.95 for MC and IC treatments, respectively. On the other hand, no significant difference was observed in the head dry matter ratio of cauliflower when different nitrogen doses or cropping system was applied (
Table 3). Vitamin C content of cauliflower significantly differed between treatments (
Table 3). In both MC and IC systems, the highest vitamin C amount was obtained when 200 kg N ha
−1 was applied. Two-year average vitamin C contents were 110.25 mg 100 g
−1 and 94.5 mg 100 g
−1 when 200 kg N ha
−1 nitrogen was applied in MC and IC systems, respectively.
The leaf dry matter ratio of lettuce was significantly (
p < 0.001) affected by nitrogen fertilization in both years whereas the effect of cropping system was not significant (
Table 4). The highest two-year average leaf dry matter ratio (5.55%) and the lowest two-year average leaf dry matter ratio (4.40%) were obtained in the MC system and the 200 kg N ha
−1 nitrogen-applied IC system, respectively. The highest amounts of vitamin C in leaf lettuce (74.33 mg 100 g
−1 and 79.75 mg 100 g
−1) were found in the IC system when 160 kg N ha
−1 nitrogen fertilizer was applied for both years (
Table 4). Vitamin C content decreased with the increased nitrogen doses in the IC system. Nitrogen × cropping system interaction was not significant. Increasing nitrogen dose significantly increased the chlorophyll reading value of leaf lettuce. Among all treatments, the highest two-year average SPAD value (53.78) was obtained when 240 kg N ha
−1 fertilizer was applied (
Table 4).
Table 5,
Table 6 and
Table 7 show the micro- and macro- element content of cauliflower. Our findings show that both nitrogen doses and cropping systems significantly (
p < 0.001) affected the N, NO
3, P, K, and Ca contents of cauliflower. NO
3, N, P, K, Ca, Mg, Mn, and B contents of cauliflower leaves increased with increasing nitrogen doses in both cropping systems. However, intercropping decreased the content of NO
3, N, Ca, Mg, and Mn content of cauliflower leaves. P, K, Fe, Cu, and B content of cauliflower leaves changed based on years. The highest NO
3, N, and Ca contents were obtained when 234.7 kg N ha
−1 nitrogen was applied in MC according to regression analysis.
Soil parameters were analyzed and presented in
Table 8. The effect of different nitrogen doses and cropping methods on soil macro and micronutrients were found statistically (
p < 0.001) significant for both years. According to two-year average values, organic matter, N, P, K, Ca, Mg, Zn, Fe, Mn, Cu, and B of cauliflower growing soil were the highest in IC growing medium when 176.6 kg N ha
−1 was applied. Our findings showed that intercropping was an efficient method to increase the soil quality index (organic matter, N, P, K, Ca, Mg, Zn, Fe, Mn, Cu, and B contents).
Land equivalent ratios (LER) were found higher than 1 in intercropping system at all nitrogen fertilizer rates (
Figure 6).
4. Discussion
We have investigated the effects of nitrogen fertilization doses and cropping systems on the yield and yield parameters of cauliflower. The leaf chlorophyll value (SPAD), plant weight, leaf weight, head diameter, head height, head weight, and total yield of cauliflower were found to increase as the nitrogen dose increased in both MC and IC systems. Moreover, when intercropping system was used the total yield (cauliflower and lettuce) was higher than the yield of cauliflower (MC) for the same total area and fertilizer amount (
Figure 3 and
Figure 5). Nitrogen fertilization has an important role in increasing the yield and growth parameters of cauliflower, as in other Cruciferous vegetable species. Similar to our findings, earlier studies have also reported that nitrogen fertilization significantly increased the plant growth and chlorophyll content in cauliflower [
17,
30,
31,
32] since nitrogen plays important roles in the meristematic development, chlorophyll formation, and photosynthesis [
30]. On the other hand, increasing N doses lowered the vitamin C content of cauliflower heads. The vitamin C content of plants is affected by many pre-harvest factors such as genotype, fertilization, and irrigation [
33]. Since excess use of nitrogen fertilizers increases the nitrate concentration in plants, the vitamin C content decreases. A similar study conducted by Chinese cabbage [
34] also reported that the lowest amount of vitamin C in cabbage heads was found when the highest dose of nitrogen was applied. Our results showed that the most efficient nitrogen fertilizer doses for cauliflower were 234.7 kg ha
−1 for MC and 176.6 kg ha
−1 for IC, respectively (
Figure 4). Although the yield of cauliflower increases with the increase in N fertilization dose, it is crucial to find the optimum dose for the growth since high doses of nitrogen activate some physiological and pathological disorders. Our findings showed that the yield of cauliflower was not affected significantly by intercropping. Similarly, Yildirim and Güvenç [
18] reported that intercropping cauliflower with vegetables such as onions, lettuce and beans did not adversely affect the yield. Other studies also stated that intercropping late maturing species with early harvesting species does not have a negative effect on the yield of either species [
8,
10] since the species with short vegetation are harvested before competition for resources such as light, water, and nutrients begins [
35,
36]. While intercropping cauliflower with lettuce did not adversely affect the yield of cauliflower, it enabled harvesting more plants (cauliflower and lettuce) from the same land area by using same amount of fertilizer, which makes intercropping a sustainable, economical, and ecological model that increases the land-use and fertilizer-use efficiencies. Nitrogen fertilization had a positive effect on micro- and macronutrient content of cauliflower (
Table 5,
Table 6 and
Table 7). The NO
3, N, P, K, Ca, Mg, Fe, Mn, and B content of cauliflower leaves generally increased with the increasing fertilization dose. Similarly, earlier studies reported that nitrogen fertilization improved plant and root growth enhancing the plant nutrient uptake [
16,
17]. On the other hand, intercropping decreased NO
3, N, Ca, Mg, and Mn contents of cauliflower leaves and the highest amounts were achieved when 240 kg N ha
−1 fertilizer was used for both years. However, since the amount of decrease in plant nutrients in cauliflower leaves did not adversely affect the growth parameters, most importantly the head weight, the yield of cauliflower was not significantly affected from intercropping (
Table 3 and
Figure 3).
The nitrogen rate and cropping system also had significant effect on the growth and yield parameters of leaf lettuce such as plant weight, stem diameter, vitamin C content, chlorophyll reading value, and dry matter ratio (
Table 4). In intercropping systems, high nitrogen fertilization treatments negatively affected plant weight, leaf dry matter ratio, and stem diameter of leaf lettuce (
Table 4). This may be due to the fact that cauliflower was more competitive than leaf lettuce at high nitrogen doses [
1]. Although the plant weight of leaf lettuce was not significantly affected from intercropping, the yield of leaf lettuce was significantly reduced in intercropping system compared to sole cropping (
Figure 5), since the number of lettuce in the intercropping system (83,333 plants) was half of the sole cropping system (166,666 plants).
The land equivalent ratio (LER) values were greater than 1 in the intercropping system at all fertilization rates (
Figure 6). A LER > 1 indicates that the intercropping (IC) system is more productive than the monocropping (MC) system for the same unit of land, whereas LER < 1 indicates a non-profitable intercropping system supporting a high level of interspecific competition [
37,
38,
39]. In previous studies, it was stated that intercropping might provide productivity and profitability by high total yields obtained per unit area under field and greenhouse conditions [
8,
18,
40]. This can be explained by the more efficient use of available resources per unit area for different crops [
41]. More efficient crop production in limited areas also increases the income of farmers [
40,
42,
43].