5th UK–China Steel Research Forum
1
School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham B15 2TT, UK
2
Department of Engineering, University of Leicester, Leicester LE1 7RH, UK
3
WMG, University of Warwick, Coventry CV4 7AL, UK
*
Authors to whom correspondence should be addressed.
Metals 2019, 9(7), 738; https://doi.org/10.3390/met9070738
Submission received: 24 June 2019
/
Accepted: 26 June 2019
/
Published: 30 June 2019
(This article belongs to the Special Issue 5th UK-China Steel Research Forum)
Following the past successful four events in Leicester (2010), Wuhan (2012), Oxford (2014) and Chongqing (2016), the 5th UK–China Steel Research Forum, in conjunction with the 16th Conference of Chinese Materials Association in the UK on Materials Science and Engineering, was held at the University of Birmingham, UK on 4–7 July 2018. This event provided a platform for scientists, engineers, technologists, industry leaders and policymakers to discuss and exchange the recent advances on steel, materials science and engineering research in the UK and China.
This Special Issue contains selected papers presented at the 5th UK–China Steel Research Forum and the 16th Conference of Chinese Materials Association in the UK on Materials Science and Engineering covering broad topics on steel metallurgy, advanced materials, modelling of metallurgical processes, materials characterisation, advanced manufacturing, ironmaking and steelmaking, emerging steel technology and sustainable development [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22]. We hope that the Special Issue can serve as an overview of the steel research in the UK and China.
The editors acknowledge with thanks the participation of the attendees, invited and contributing authors, and reviewers. They are grateful to Dr. Shaojun Qi and Dr. Xiaoying Li of the University of Birmingham, UK for their valuable assistance in organising the Forum and in preparing this Special Issue.
Conflicts of Interest
The authors declare no conflict of interest.
References
- You, D.; Michelic, S.; Bernhard, C. Formation of multi-type inclusions during the cooling and solidification of steel: A trend model. Metals 2018, 8, 452. [Google Scholar] [CrossRef]
- Yang, J.; Wang, B.; Zou, C.; Li, X.; Li, T.; Liu, Q. Optimal charge planning model of steelmaking based on multi-objective evolutionary algorithm. Metals 2018, 8, 483. [Google Scholar] [CrossRef]
- Ma, S.; Yan, R.; Jing, T.; Dong, H. Substrate-Induced Liquid Layering: A new insight into the heterogeneous nucleation of liquid Metals. Metals 2018, 8, 521. [Google Scholar] [CrossRef]
- Xu, Q.; Liu, Z.; Li, Z.; Wang, J.; Zhou, L. The effect of carbon dissection of waste plastics on inhibiting the adhesion of fine iron ore particles during hydrogen reduction. Metals 2018, 8, 523. [Google Scholar] [CrossRef]
- Xu, Q.; Li, Z.; Liu, Z.; Wang, J.; Wang, H. The effect of pressurized decarbonization of CO on inhibiting the adhesion of fine iron ore particles. Metals 2018, 8, 525. [Google Scholar] [CrossRef]
- Lou, H.; Wang, C.; Wang, B.; Wang, Z.; Li, Y.; Chen, Z. Inclusion evolution behavior of Ti-Mg oxide metallurgy steel and its effect on a high heat input welding HAZ. Metals 2018, 8, 534. [Google Scholar] [CrossRef]
- Zhang, J.; Liu, J.; Yu, S.; Dong, D.; Wang, G.; Li, S. Production of clean steel using the nitrogen elevating and reducing method. Metals 2018, 8, 560. [Google Scholar] [CrossRef]
- Zhou, F.; Zhang, Q.; Wang, F.; Wang, J.; Yang, Y.; Lai, C.; Liu, W.; Wang, J. Surface characterization and secondary electron emission properties of alumina containing MgO film on Ag-Mg-Al alloy. Metals 2018, 8, 570. [Google Scholar] [CrossRef]
- Li, H.; Sun, L.; Zhu, L.; Liu, Y.; Li, Y. Research on influential mechanism of HAZ impact toughness for shipbuilding steel with Mg addition. Metals 2018, 8, 584. [Google Scholar] [CrossRef]
- Zhao, S.; Ge, Y.; Ma, L.; Yan, T.; Lyu, J.; Li, Z. Formation analysis of edge cracks of 33MnCrTiB fork steel. Metals 2018, 8, 587. [Google Scholar] [CrossRef]
- Li, Y.; Cheng, C.; Yang, M.; Dong, Z.; Xue, Z. Behavior characteristics of argon bubbles on inner surface of upper tundish nozzle during argon blowing process. Metals 2018, 8, 590. [Google Scholar] [CrossRef]
- Sun, J.; Peng, W.; Ding, J.; Li, X.; Zhang, D. Key Intelligent technology of steel strip production through process. Metals 2018, 8, 597. [Google Scholar] [CrossRef]
- Yan, R.; Ma, S.; Jing, T.; Dong, H. The in-plane structure and dynamic property of the homogeneous Al-Al solid-liquid interface. Metals 2018, 8, 602. [Google Scholar] [CrossRef]
- Jin, Y.; Dong, X.; Yang, F.; Cheng, C.; Li, Y.; Wang, W. Removal mechanism of microscale non-metallic inclusions in a tundish with multi-hole-double-baffles. Metals 2018, 8, 611. [Google Scholar] [CrossRef]
- Wang, Y.; Zhu, L.; Zhang, Q.; Zhang, C.; Wang, S. Effect of Mg Treatment on refining the microstructure and improving the toughness of the heat-affected zone in shipbuilding steel. Metals 2018, 8, 616. [Google Scholar] [CrossRef]
- Zheng, S.; Zhu, M. New process with argon injected into ladle around the tapping hole for controlling slag carry-over during continuous casting ladle. Metals 2018, 8, 624. [Google Scholar] [CrossRef]
- Liu, H.; Zhang, H.; Li, J. Thickness Dependence of Toughness in ultra-heavy low-alloyed steel plate after quenching and tempering. Metals 2018, 8, 628. [Google Scholar] [CrossRef]
- Xu, Q.; Yang, C.; Zhang, H.; Yan, X.; Tang, N.; Liu, B. Multiscale modeling and simulation of directional solidification process of Ni-based superalloy turbine blade casting. Metals 2018, 8, 632. [Google Scholar] [CrossRef]
- Li, Y.; Zan, L.; Ge, Y.; Wei, H.; Zhang, Z.; Bi, C.; Lu, K.; Yu, Y. Monitoring liquid level of blast furnace hearth and torpedo ladle by electromotive force signal. Metals 2018, 8, 665. [Google Scholar] [CrossRef]
- Manocha, S.; Ponchon, F. Management of lime in steel. Metals 2018, 8, 686. [Google Scholar] [CrossRef]
- Yang, G.; Zhu, L.; Chen, W.; Yu, X.; He, B. Initiation of surface cracks on beam blank in the mold during continuous casting. Metals 2018, 8, 712. [Google Scholar] [CrossRef]
- Li, H.; Zhao, Z.; Dong, D.; Han, G.; Zhang, J.; Liu, H.; You, X. Edge-drop control behavior for silicon strip cold rolling with a Sendzimir mill. Metals 2018, 8, 783. [Google Scholar] [CrossRef]
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Dong, H.; Dong, H.; Li, Z. 5th UK–China Steel Research Forum. Metals 2019, 9, 738. https://doi.org/10.3390/met9070738
AMA Style
Dong H, Dong H, Li Z. 5th UK–China Steel Research Forum. Metals. 2019; 9(7):738. https://doi.org/10.3390/met9070738
Chicago/Turabian StyleDong, Hanshan, Hongbiao Dong, and Zushu Li. 2019. "5th UK–China Steel Research Forum" Metals 9, no. 7: 738. https://doi.org/10.3390/met9070738
APA StyleDong, H., Dong, H., & Li, Z. (2019). 5th UK–China Steel Research Forum. Metals, 9(7), 738. https://doi.org/10.3390/met9070738
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
