Next Article in Journal
Polarization-Sensitive Nonlinear Optical Interaction of Ultrashort Laser Pulses with HPHT Diamond
Next Article in Special Issue
An Aero-Optical Effect Analysis Method in Hypersonic Turbulence Based on Photon Monte Carlo Simulation
Previous Article in Journal
Analysis and Suppression of Crosstalk Beams in Microlens Array Scanning Imaging Optical System Based on the Combination of Multilayer Stop Arrays
Previous Article in Special Issue
Optimal Design of Segmented Planar Imaging System Based on Rotation and CLEAN Algorithm
 
 
Communication
Peer-Review Record

Nondestructive Thickness Measurement of Thermal Barrier Coatings for Turbine Blades by Terahertz Time Domain Spectroscopy

Photonics 2023, 10(2), 105; https://doi.org/10.3390/photonics10020105
by Longhai Liu 1,2, Haiyuan Yu 3, Chenglong Zheng 1, Dongdong Ye 4,*, Wei He 5, Silei Wang 1, Jining Li 1, Liang Wu 1, Yating Zhang 1, Jianhua Xie 2 and Jianquan Yao 1,6,*
Reviewer 1: Anonymous
Reviewer 2:
Photonics 2023, 10(2), 105; https://doi.org/10.3390/photonics10020105
Submission received: 17 December 2022 / Revised: 10 January 2023 / Accepted: 12 January 2023 / Published: 19 January 2023
(This article belongs to the Special Issue Advanced Photonics Sensors, Sources, Systems and Applications)

Round 1

Reviewer 1 Report

This paper is high quality, some minor comments:

(1)  For actual turbine blade detections, how to ensure the THz waves with 10° incident angle?

(2)  What is the accuracy of the eddy current system? Could you provide the product type?

(3)  For Fig.1, please give the amplitude of the THz signal.

(4)  In Table 2, the reasons for the large difference between results of THz and eddy current in Position 6 should be given in detail.

(5)  Please use blank space in the following cases: 0.8 mm, 25.6 mm etc.

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Reviewer 2 Report

The authors used THz-TDS to perform the nondestructive thickness measurement of TBC for turbine blades. Some issues should be improved before published.

1 In Line 80, ‘it’ should be ‘It’. In Line 123, ‘the’ should be ‘The’.

2. In Line 93, the last sentence is incomplete.

3. In Line 123, the authors claimed that the refractive index of 8YSZ is 5.56. It is better to give the plots of the refractive index measured results, and the frequency range should be given.

4.In Line 167, the sentence ‘The middle thinner positions were marked with redline at the TBC back side…’. It can not be reflected in Figure 4.

5 In table 1, the difference between the deviations is large, such as 0.65% and 3.45%, and the results need to be discussed in detail.

Author Response

Please see the attachment.

the reference is also updated.

Author Response File: Author Response.docx

Back to TopTop