Proceedings

Order results

Result details

Select all

Export citation of selected articles as:

Other

6 pages, 1865 KiB

Open AccessProceeding Paper

Preparation and Characterization of CuFe₂O₄Nanoparticles by the Sol-Gel Method and Investigation of Its Microwave Absorption Properties at Ku-Band Frequency Using Silicone Rubber

by Reza Peymanfar, Farzaneh Azadi and Yousef Yassi

Proceedings 2018, 2(17), 1155; https://doi.org/10.3390/ecms2018-05218 - 14 May 2018

Cited by 11 | Viewed by 2436

Abstract

Recently, using microwave devices that emit electromagnetic waves and enhance the convenience of life have increased; however, they can be harmful to the environment. In this study, CuFe₂O₄nanoparticles were prepared through the conventional sol-gel procedure and then were characterized by X-ray powder diffraction (XRD), vibrating sample magnetometer (VSM), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), and vector network analyzer (VNA) using S parameters. Results illustrated that pure crystal structure of magnetic nanoparticles has been synthesized by the sol-gel method with magnetic saturation (M_s) of 22 emu/g. Finally, CuFe₂O₄nanoparticles were composited by silicone rubber to investigate its microwave absorption properties. Results showed that the CuFe₂O₄/silicone rubber nanocomposite absorbed more than 94.87% of the microwave irradiation at ku-band frequency with 1.7 mm thickness and the maximum reflection loss was −60.38 dB at 16.1 GHz. Magnetic and dielectric properties of the CuFe₂O₄ nanoparticles and silicone rubber polymeric matrix in the nanocomposite demonstrated desirable microwave absorption properties. Full article

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Materials Sciences)

► Show Figures

Figure 1

6 pages, 903 KiB

Open AccessProceeding Paper

Preparation and Identification of CuCr₂O₄ Nanoparticles and Investigation of Its Microwave Absorption Characteristics at X-Band Frequency Using Silicone Rubber Polymeric Matrix

by Reza Peymanfar and Niloofar Khodamoradipoor

Proceedings 2018, 2(17), 1156; https://doi.org/10.3390/ecms2018-05193 - 17 Apr 2018

Viewed by 1702

Abstract

Lately, silicone rubber, because of the desirable permittivity on the one hand, and various applications in the implants, membranes, solar cells, sensors, semiconductor devices, high frequency devices, photothermal therapy methods, acoustic metamaterials, and insulator materials on the other hand, has attracted considerable attention. In this research, CuCr₂O₄ nanoparticles were prepared according to the sol–gel method and then were identified by Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and vibrating sample magnetometer (VSM). Results showed that monophase crystal structure with identical morphology of CuCr₂O₄ nanoparticles has been synthesized. Finally, CuCr₂O₄ nanoparticles and silicone rubber were composited and then microwave absorbing properties of the CuCr₂O₄/silicone rubber nanocomposite were investigated by vector network analyzer (VNA), exhibiting 48.56 dB microwave attenuation for the CuCr₂O₄/silicone rubber nanocomposite with 2.6 mm thickness at 10.9 GHz frequency, while having more than 92.99% microwave absorption along the x-band frequency. Full article

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Materials Sciences)

► Show Figures

Figure 1

7 pages, 451 KiB

Open AccessProceeding Paper

Analysis and Reliability Study of Luminescent Materials for White Lighting

by Nicola Trivellin, Matteo Meneghini, Matteo Buffolo, Gaudenzio Meneghesso and Enrico Zanoni

Proceedings 2018, 2(17), 1158; https://doi.org/10.3390/ecms2018-05233 - 15 May 2018

Cited by 2 | Viewed by 1255

Abstract

In this work, we report on the characterization and reliability/stability study of phosphorescent materials for lighting applications. More specifically, we investigated (a) phosphors directly deposited over light-emitting diodes (LED) chip, (b) remote phosphor (RP) solutions encapsulated in plastic medium for LED lighting, and (c) phosphors without binder for extreme high-intensity laser diode white lighting. The optical and thermal properties of phosphors were studied to develop a sample based on a mix of phosphor compounds in order to achieve different correlated color temperatures (CCT) and high color rendering index (CRI) LEDs. Thermal properties of cerium-doped YAG (Yttrium Aluminum Garnet) phosphor materials were evaluated in order to study thermal quenching. A maximum phosphor operating temperature of 190–200 °C was found to cause a sensible efficiency degeneration. Reduced efficiency and Stokes shift also caused a localized temperature increase in the photoluminescent materials. In the case of remote phosphors, heat did not find a low thermal resistance path to the heatsink (as occurred through the GaN LED chip for direct phosphor-converted devices) and thermal analysis indicated that material temperature might therefore increase to values in excess of 60 °C when a radiation of 435 mW/cm² hit the sample template. Reliability was also investigated for both plastic-encapsulated materials and binder-free depositions. Pure thermal reliability study indicated that phosphors encapsulated in polycarbonate material were stable up to temperature of approximately 100 °C, while binder-free phosphor did not show any sensible degradation up to temperatures of 525 °C. Full article

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Materials Sciences)

► Show Figures

Figure 1

8 pages, 1551 KiB

Open AccessProceeding Paper

Preparation and Identification of BaFe₂O₄ Nanoparticles by the Sol–Gel Route and Investigation of Its Microwave Absorption Characteristics at Ku-Band Frequency Using Silicone Rubber Medium

by Reza Peymanfar, Mitra Rahmanisaghieh, Arezoo Ghaffari and Yousef Yassi

Proceedings 2018, 2(17), 5234; https://doi.org/10.3390/ecms2018-05234 - 18 May 2018

Cited by 12 | Viewed by 2026

Abstract

In the last decade, spinel structures have been widely explored due to widespread applications in antibacterial nanocomposites, memory devices, catalysts, photocatalysts, high-frequency devices, and electromagnetic absorbing materials. In this study, BaFe₂O₄ spinel structures were synthesized through the sol–gel method using a low sintering temperature and were identified by vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and vector network analyzer (VNA) analysis. Results showed that uniform and pure crystal structures of BaFe₂O₄ nanoparticles were prepared based on the sol–gel method. Finally, BaFe₂O₄ nanoparticles were blended by silicone rubber to characterize the microwave absorption properties of the nanocomposite at the ku-band frequency. According to the VNA results, the BaFe₂O₄/silicone rubber nanocomposite with 1.75 mm thickness absorbed more than 94.38% of microwave irradiation along the ku-band frequency and the maximum reflection loss of the BaFe₂O₄/silicone rubber nanocomposite was 51.67 dB at 16.1 GHz. Full article

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Materials Sciences)

► Show Figures

Journal Menu

Journal Browser

Proceedings, 2018, ECMS 2018

The 3rd International Electronic Conference on Materials Sciences

Other

Further Information

Guidelines

MDPI Initiatives

Follow MDPI