Spacecraft Attitude Determination and Control

A special issue of Aerospace (ISSN 2226-4310). This special issue belongs to the section "Astronautics & Space Science".

Deadline for manuscript submissions: closed (29 February 2020) | Viewed by 26548

Special Issue Editor


E-Mail Website
Guest Editor
TUBITAK Space Technologies Research Institute, Ankara, Turkey
Interests: spacecraft attitude determination and control; spacecraft dynamics; adaptive/robust Kalman filtering algorithms

Special Issue Information

Dear Colleagues,

Attitude determination and control (ADC) systems are one of the key subsystems crucial for the success of any spacecraft mission. Winston Churchill says “Attitude is a little thing that makes a big difference.” Certainly, “attitude” in our context does not have the same meaning, but what this quote expresses is still true for spacecraft missions. We cannot envision modern spacecraft or expect mission success without a skillfully designed and engineered ADC system. A “few degrees”, which may be insignificant to anyone else, makes a big difference in this context. Such stringent requirements are the main reason for our research, which seeks to improve the performance of ADC systems.

Today we are seeking faster progress in space activities. New mission concepts led by cheap and affordable small satellites are expanding the possibility of space research to more people. As a consequence, spacecraft ADC has become an even more attractive research field. Despite the shrinking sensors and actuators, we need to propose solutions for ADC systems that are as accurate as the ones for larger spacecraft. Interesting problems include, but are not limited to small, highly capable ADC instrumentation enabling the acquisition of high-quality scientific and exploration information, algorithm design to enable higher performance over reasonable mission durations and ADC subsystems and algorithms to operate a swarm of small satellites in constellation.

This Special Issue is focused on highlighting the recent advances in spacecraft ADC with a special interest in the algorithms, methods and system design for small spacecraft. As well as articles proposing novel theories in the field of spacecraft ADC, contributions with practical results for actual missions are very welcomed.

Dr. Halil Ersin Söken
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Aerospace is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • actuators
  • attitude control
  • attitude determination
  • attitude estimation
  • control theory
  • guidance, navigation and control
  • Kalman filter
  • nonlinear filtering algorithms
  • sensor calibration
  • small spacecraft
  • system design
  • spacecraft dynamics

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (4 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

19 pages, 4926 KiB  
Article
Filtering-Based Three-Axis Attitude Determination Package for Spinning Spacecraft: Preliminary Results with Arase
by Halil Ersin Soken, Shin-ichiro Sakai, Kazushi Asamura, Yosuke Nakamura, Takeshi Takashima and Iku Shinohara
Aerospace 2020, 7(7), 97; https://doi.org/10.3390/aerospace7070097 - 13 Jul 2020
Cited by 7 | Viewed by 3976
Abstract
JAXA’s ERG (Exploration of Energization and Radiation in Geospace) Spacecraft, which is nicknamed Arase, was launched on 20 December 2016. Arase is a spin-stabilized and Sun-oriented spacecraft. Its mission is to explore how relativistic electrons in the radiation belts are generated during space [...] Read more.
JAXA’s ERG (Exploration of Energization and Radiation in Geospace) Spacecraft, which is nicknamed Arase, was launched on 20 December 2016. Arase is a spin-stabilized and Sun-oriented spacecraft. Its mission is to explore how relativistic electrons in the radiation belts are generated during space storms. Two different on-ground attitude determination algorithms are designed for the mission: A TRIAD-based algorithm that inherits from old missions and a filtering-based new algorithm. This paper, first, discusses the design of the filtering-based attitude determination algorithm, which is mainly based on an Unscented Kalman Filter (UKF), specifically designed for spinning spacecraft (SpinUKF). The SpinUKF uses a newly introduced set of attitude parameters (i.e., spin-parameters) to represent the three-axis attitude of the spacecraft and runs UKF for attitude estimation. The paper then presents the preliminary attitude estimation results for the spacecraft that are obtained after the launch. The results are presented along with the encountered challenges and suggested solutions for them. These preliminary attitude estimation results show that the expected accuracy of the fine attitude estimation for the spacecraft is less than 0.5°. Full article
(This article belongs to the Special Issue Spacecraft Attitude Determination and Control)
Show Figures

Figure 1

21 pages, 8962 KiB  
Article
A Magnetometer-Only Attitude Determination Strategy for Small Satellites: Design of the Algorithm and Hardware-in-the-Loop Testing
by Stefano Carletta, Paolo Teofilatto and M. Salim Farissi
Aerospace 2020, 7(1), 3; https://doi.org/10.3390/aerospace7010003 - 5 Jan 2020
Cited by 27 | Viewed by 10187
Abstract
Attitude determination represents a fundamental task for spacecraft. Achieving this task on small satellites, and nanosatellites in particular, is further challenging, because the limited power and computational resources available on-board, together with the low development budget, set strict constraints on the selection of [...] Read more.
Attitude determination represents a fundamental task for spacecraft. Achieving this task on small satellites, and nanosatellites in particular, is further challenging, because the limited power and computational resources available on-board, together with the low development budget, set strict constraints on the selection of the sensors and the complexity of the algorithms. Attitude determination is obtained here from the only measurements of a three-axis magnetometer and a model of the Geomagnetic field, stored on the on-board computer. First, the angular rates are estimated and processed using a second-order low-pass Butterworth filter, then they are used as an input, along with Geomagnetic field data, to estimate the attitude matrix using an unsymmetrical TRIAD. The computational efficiency is enhanced by arranging complex matrix operations into a form of the Faddeev algorithm, which is implemented using systolic array architecture on the FPGA core of a CubeSat on-board computer. The performance and the robustness of the algorithm are evaluated by means of numerical analyses in MATLAB Simulink, showing pointing and angular rate accuracy below 10° and 0.2°/s. The algorithm implemented on FPGA is verified by Hardware-in-the-loop simulation, confirming the results from numerical analyses and efficiency. Full article
(This article belongs to the Special Issue Spacecraft Attitude Determination and Control)
Show Figures

Figure 1

22 pages, 8411 KiB  
Article
Dot Product Equality Constrained Attitude Determination from Two Vector Observations: Theory and Astronautical Applications
by Jin Wu and Shangqiu Shan
Aerospace 2019, 6(9), 102; https://doi.org/10.3390/aerospace6090102 - 12 Sep 2019
Cited by 8 | Viewed by 5554
Abstract
In this paper, the attitude determination problem from two vector observations is revisited, incorporating the redundant equality constraint obtained by the dot product of vector observations. Analytical solutions to this constrained attitude determination problem are derived. It is found out that the studied [...] Read more.
In this paper, the attitude determination problem from two vector observations is revisited, incorporating the redundant equality constraint obtained by the dot product of vector observations. Analytical solutions to this constrained attitude determination problem are derived. It is found out that the studied two-vector attitude determination problem by Davenport q-method under the dot product constraint has deterministic maximum eigenvalue, which leads to its advantage in error/perturbation analysis and covariance determination. The proposed dot product constrained two-vector attitude solution is applied then to solve several engineering problems. Detailed simulations on spacecrafts attitude determination indicate the efficiency of the proposed theory. Full article
(This article belongs to the Special Issue Spacecraft Attitude Determination and Control)
Show Figures

Figure 1

14 pages, 3247 KiB  
Article
Non-Symmetric Gyroscope Skewed Pyramids
by Zachary Lewis, Joshua Ten Eyck, Kyle Baker, Eryn Culton, Jonathan Lang and Timothy Sands
Aerospace 2019, 6(9), 98; https://doi.org/10.3390/aerospace6090098 - 4 Sep 2019
Cited by 7 | Viewed by 5734
Abstract
The novel contribution in this manuscript is an expansion of the current state-of-the-art in the geometric installation of control moment gyroscopes beyond the benchmark symmetric skewed arrays and the four asymmetric arrays presented in recent literature. The benchmark pyramid symmetrically skewed at 54.73 [...] Read more.
The novel contribution in this manuscript is an expansion of the current state-of-the-art in the geometric installation of control moment gyroscopes beyond the benchmark symmetric skewed arrays and the four asymmetric arrays presented in recent literature. The benchmark pyramid symmetrically skewed at 54.73 degrees mandates significant attention to singularity avoidance, escape, and penetration, while the most recent four asymmetric arrays are strictly useful in instances where space is available to mount at least one gyro orthogonal to the others. Skewed arrays of gyros and the research-benchmark are introduced, followed by the present-day box-90 and “roof” configurations, where the roof configuration is the first prevalently used asymmetric geometry. Six other asymmetric options in the most recent literature are introduced, where four of the six options are obviously quite useful. From this inspiration, several dozen discrete options for asymmetric installations are critically evaluated using two figures of merit: maximum momentum (saturation) and maximum singularity-free momentum. Furthermore, continuous surface plots are presented to provide readers with countless (infinite) options for geometric installations. The manuscript firmly establishes many useful options for engineers who learn that the physical space on their spacecraft is insufficient to permit standard installations. Full article
(This article belongs to the Special Issue Spacecraft Attitude Determination and Control)
Show Figures

Figure 1

Back to TopTop