Submit to Polymers Review for Polymers Propose a Special Issue

Journal Menu

Journal Browser

► Journal Browser

Polymeric Materials for Wastewater Treatment Applications

Special Issue Editors
Special Issue Information
Keywords
Benefits of Publishing in a Special Issue
Published Papers

A special issue of Polymers (ISSN 2073-4360). This special issue belongs to the section "Polymer Applications".

Deadline for manuscript submissions: closed (31 August 2024) | Viewed by 26003

Share This Special Issue

Special Issue Editors

Dr. Marta Otero

E-Mail Website1 Website2
Guest Editor

1. Department of Applied Chemistry and Physics, University of León, 24071 León, Spain
2. Department of Environment and Planning, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
Interests: water pollution and contamination; water and wastewater treatment: global treatment systems; sustainable treatment processes; clean and alternative technologies; waste management and valorization; alternative adsorbent materials; alternative photocatalysts
Special Issues, Collections and Topics in MDPI journals

Dr. Ricardo N. Coimbra

E-Mail
Guest Editor

Chemo, Insud Pharma, León, Spain
Interests: polymeric materials; polymer processing; polymer applications; water treatment; emerging contaminants
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Water is indispensable to the functioning of most known life forms, and good water quality is essential to human health, social and economic development, and ecosystem functioning. Nonetheless, population growth has led to the degradation and depletion of freshwater resources around the world. Under these circumstances, ensuring sufficient and safe water supplies for everyone is one of the Sustainable Development Goals (SDGs) set by the United Nations General Assembly in 2015 for the year 2030. For this goal to be achieved, the development and implementation of appropriate and efficient wastewater treatments that make it possible to reduce water pollution is a major challenge.

The application of polymers and polymeric materials in wastewater treatment is a research field that has developed greatly. Conventional and novel approaches have been used by researchers from different areas, who have demonstrated that polymers and polymeric materials may have an important role in the removal of pollutants of different origin and nature from wastewater, in the disposal of sludge, in the recycling of materials, in the improved efficiency and economy of wastewater, etc.

In view of the relevant contributions that polymers and polymeric materials may make in the conservation of the aquatic environment—namely, by their application in wastewater treatment—this Special Issue aims to publish of original research and review papers within this area. Scientific contributions on any aspect related to the utilization of polymers and polymeric materials—either synthetic or natural—in the treatment or purification of wastewater are welcomed.

Given the large spectrum of materials, types of pollution and treatment processes, this is a widely inclusive Special Issue. Subject areas may include but are not limited to applications such as:

Coagulation–flocculation;
Membrane processes;
Ion exchange;
Adsorption;
New (nano)materials production, characterization or utilization;
Surface modification and/or functionalization;
Molecularly imprinted polymers;
Polymer catalysts for water treatment;
Polymeric blends, hybrids or (nano)composites;
Combined or integrated treatments;
Novel strategies for efficiency enhancement;
Sustainable wastewater treatment;
Management of sludge from wastewater treatment.

Dr. Marta Otero
Dr. Ricardo N. Coimbra
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

wastewater treatment
organic contaminants
inorganic contaminants
pollutant removal
polymer applications

Benefits of Publishing in a Special Issue

Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (12 papers)

Download All Papers

Order results

Result details

Show export options Show export options

Select all

Export citation of selected articles as:

Research

Jump to: Review

28 pages, 11928 KiB

Open AccessArticle

Vapor Pressure and Evaporation Studies of Saline Solutions on Natural and Synthetic Fabrics for Industrial Water Treatment

by Alexis López-Borrell, Jaime Lora-García, Salvador C. Cardona, María-Fernanda López-Pérez and Vicent Fombuena

Polymers 2024, 16(16), 2335; https://doi.org/10.3390/polym16162335 - 18 Aug 2024

Viewed by 965

Abstract

In the present paper, we have conducted a comprehensive analysis of vapor pressures of both saturated and unsaturated solutions, alongside a study of evaporation using synthetic and natural fabrics for industrial applications in brackish water treatment under zero liquid discharge (ZLD) philosophy. By determining the vapor pressures of saturated solutions, we obtained results consistent with those of other researchers, extending the range of tested temperatures from 1 to 50 °C and successfully fitting the parameters of an Antoine-type equation. Similarly, positive results were achieved for unsaturated solutions, where various parameters of different equations accounting for the salt concentration were estimated, simplifying the fitting procedure. Natural evaporation tests from water surfaces using saturated solutions revealed that salts with higher associated vapor pressures exhibit higher evaporation rates. On the other hand, hydrated salts retain water in their structure and are significantly affected by ambient humidity. Evaporation studies on natural and synthetic fabrics with saturated NaCl and CuSO₄·5H₂O solutions showed distinct behaviors. NaCl increased both the evaporation rate and salt deposition with each cycle. In contrast, CuSO₄·5H₂O reduced the absorption capacity by blocking the fabric’s structure, decreasing the evaporation efficiency over successive cycles. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Graphical abstract

19 pages, 3470 KiB

Open AccessArticle

Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile

by Yassine EL-Ghoul and Salman Alsamani

Polymers 2024, 16(5), 585; https://doi.org/10.3390/polym16050585 - 21 Feb 2024

Cited by 2 | Viewed by 1308

Abstract

Water scarcity and contamination have emerged as critical global challenges, requiring the development of effective and sustainable solutions for the treatment of contaminated water. Recently, functionalized polymer biomaterials have garnered significant interest because of their potential for a wide range of water treatment applications. Accordingly, this paper highlights the design of a new adsorbent material based on a cellulosic nonwoven textile grafted with two extracted biopolymers. The layer-by-layer grafting technique was used for the polyelectrolyte multi-layer (PEM) biosorbent production. Firstly, we extracted a Suaeda fruticosa polysaccharide (SFP) and confirmed its pectin-like polysaccharide structure via SEC, NMR spectroscopy, and chemical composition analyses. Afterward, the grafting was designed via an alternating multi-deposition of layers of SFP polymer and carrageenan crosslinked with 1,2,3,4-butanetetracarboxylic acid (BTCA). FT-IR and SEM were used to characterize the chemical and morphological characteristics of the designed material. Chemical grafting via polyesterification reactions of the PEM biosorbent was confirmed through FT-IR analysis. SEM revealed the total filling of material microspaces with layers of grafted biopolymers and a rougher surface morphology. The assessment of the swelling behavior revealed a significant increase in the hydrophilicity of the produced adsorbent system, a required property for efficient sorption potential. The evaluation of the adsorption capabilities using the methylene blue (MB) as cationic dye was conducted in various experimental settings, changing factors such as the pH, time, temperature, and initial concentration of dye. For the untreated and grafted materials, the greatest adsorbed amounts of MB were 130.6 mg/g and 802.6 mg/g, respectively (pH = 4, T = 22 C, duration = 120 min, and dye concentration = 600 mg/L). The high adsorption performance, compared to other reported materials, was due to the presence of a large number of hydroxyl, sulfonate, and carboxylic functional groups in the biosorbent polymeric system. The adsorption process fitted well with the pseudo-first-order kinetic model and Langmuir/Temkin adsorption isotherms. This newly developed multi-layered biosorbent shows promise as an excellent adsorption resultant and cheap-cost/easy preparation alternative for treating industrial wastewater. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

15 pages, 3955 KiB

Open AccessArticle

Development of Poly(acrylamide)-Based Hydrogel Composites with Powdered Activated Carbon for Controlled Sorption of PFOA and PFOS in Aqueous Systems

by Maria Victoria X. Klaus, Angela M. Gutierrez and J. Zach Hilt

Polymers 2023, 15(22), 4384; https://doi.org/10.3390/polym15224384 - 11 Nov 2023

Cited by 2 | Viewed by 3196

Abstract

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic compounds developed for various applications; some are connected to adverse health impacts including immunosuppression and higher susceptibility to some cancers. Current PFAS remediation treatments from aqueous sources include granular activated carbon (GAC) adsorption, membrane separation, and anion-exchange resin (AER) removal. Each has specific disadvantages, hence the need for a new and efficient technology. Herein, acrylamide-based hydrogel composites were synthesized with powdered activated carbon (PAC) and characterized to determine their affinity for PFAS. Physicochemical characterization included Fourier-Transform infrared spectroscopy (FTIR) to identify chemical composition, thermogravimetric analysis (TGA) to confirm PAC loading percentage, and aqueous swelling studies to measure the effect of crosslinking density. FTIR showed successful conversion of carbonyl and amine groups, and TGA analysis confirmed the presence of PAC within the network. Surface characterization also confirmed carbon-rich areas within composite networks, and the swelling ratio decreased with increasing crosslinking density. Finally, sorption of PFAS was detected via liquid chromatography with tandem mass spectrometry (LC-MS/MS), with removal efficiencies of up to 98% for perfluorooctanoic sulfonic acid (PFOS) and 96% for perfluorooctanoic acid (PFOA). The developed hydrogel composites exhibited great potential as advanced materials with tunable levers that can increase affinity towards specific compounds in water. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

20 pages, 2819 KiB

Open AccessArticle

Porosity Effect of Polystyrene Membranes on Desalination Performance: A Combined Experimental and Numerical Heat and Mass Transfer Study in Direct Contact Membrane Distillation

by Haneen Abdelrazeq and Majeda Khraisheh

Polymers 2023, 15(8), 1821; https://doi.org/10.3390/polym15081821 - 8 Apr 2023

Cited by 6 | Viewed by 2360

Abstract

Membrane distillation (MD) is a thermal-based membrane operation with high potential for use in the treatment of aqueous streams. In this study, the linear relationship between the permeate flux and the bulk feed temperature for different electrospun polystyrene membranes is discussed. The dynamics of combined heat and mass transfer mechanisms across different membrane porosities of 77%, 89%, and 94%, each with different thicknesses, are examined. The main results for the effect of porosity with respect to the thermal efficiency and evaporation efficiency of the DCMD system are reported for electrospun polystyrene membranes. A 14.6% increase in thermal efficiency was noted for a 15% increase in membrane porosity. Meanwhile, a 15.6% rise in porosity resulted in a 5% increase in evaporation efficiency. A mathematical validation along with computational predictions is presented and interlinked with the maximum thermal and evaporation efficiencies for the surface membrane temperatures at the feed and temperature boundary regions. This work helps to further understand the interlinked correlations of the surface membrane temperatures at the feed and temperature boundary regions with respect to the change in membrane porosity. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

17 pages, 2598 KiB

Open AccessFeature PaperArticle

A Novel Chitosan/Nano-Hydroxyapatite Composite for the Adsorptive Removal of Cd(II) from Aqueous Solution

by Rachid El Kaim Billah, Ikrame Ayouch, Youness Abdellaoui, Zineb Kassab, Moonis Ali Khan, Mahfoud Agunaou, Abdessadik Soufiane, Marta Otero and Byong-Hun Jeon

Polymers 2023, 15(6), 1524; https://doi.org/10.3390/polym15061524 - 19 Mar 2023

Cited by 22 | Viewed by 3273

Abstract

A novel polymer bio-composite based on nano-hydroxyapatite (n-Hap) and chitosan (CS) (CS/n-Hap) was synthesized to effectively address toxic cadmium ions removal from water. The composition and structure of CS/n-Hap bio-composite were analyzed through different characterization techniques. XRD patterns affirmed that the crystalline structure of n-Hap remained unaltered during CS/n-Hap synthesis, while FT-IR spectrum sustained all the characteristic peaks of both CS and n-Hap, affirming the successful synthesis of CS/n-Hap. Adsorption studies, including pH, adsorbent dosage, contact time, initial Cd(II) concentration, and temperature, were carried out to explain and understand the adsorption mechanism. Comparatively, CS/n-Hap bio-composite exhibited better Cd(II) adsorption capacity than pristine CS, with an experimental maximum uptake of 126.65 mg/g under optimized conditions. In addition, the kinetic data were well fitted to the pseudo-second-order model, indicating the formation of chemical bonds between Cd(II) and CS/n-Hap during adsorption. Furthermore, the thermodynamic study suggested that Cd(II) adsorption onto CS/n-Hap was endothermic and spontaneous. The regeneration study showed only about a 3% loss in Cd(II) uptake by CS/n-Hap after five consecutive cycles. Thus, a simple and facile approach was here developed to synthesize an eco-friendly and cost-effective material that can be successfully employed for the removal of toxic heavy metal ions from water. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Graphical abstract

17 pages, 4375 KiB

Open AccessArticle

Effective Removal of Glyphosate from Aqueous Systems Using Synthesized PEG-Coated Calcium Peroxide Nanoparticles: Kinetics Study, H₂O₂ Release Performance and Degradation Pathways

by Fan Li, Thomas Shean Yaw Choong, Luqman Chuah Abdullah, Siti Nurul Ain Md. Jamil and Nurul Nazihah Amerhaider Nuar

Polymers 2023, 15(3), 775; https://doi.org/10.3390/polym15030775 - 3 Feb 2023

Cited by 7 | Viewed by 2536

Abstract

Glyphosate (N-phosphonomethyl glycine) is a non-selective, broad-spectrum organophosphate herbicide. Its omnipresent application with large quantity has made glyphosate as a problematic contaminant in water. Therefore, an effective technology is urgently required to remove glyphosate and its metabolites from water. In this study, calcium peroxide nanoparticles (nCPs) were functioned as an oxidant to produce sufficient hydroxyl free radicals (·OH) with the presence of Fe²⁺ as a catalyst using a Fenton-based system. The nCPs with small particle size (40.88 nm) and high surface area (28.09 m²/g) were successfully synthesized via a co-precipitation method. The synthesized nCPs were characterized using transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), Brunauer–Emmett–Teller analysis (BET), dynamic light scattering (DLS), and field emission scanning electron microscopy (FESEM) techniques. Under the given conditions (pH = 3.0, initial nCPs dosage = 0.2 g, Ca²⁺/Fe²⁺ molar ratio = 6, the initial glyphosate concentration = 50 mg/L, RT), 99.60% total phosphorus (TP) removal and 75.10% chemical oxygen demand (COD) removal were achieved within 75 min. The degradation process fitted with the Behnajady–Modirshahla–Ghanbery (BMG) kinetics model. The H₂O₂ release performance and proposed degradation pathways were also reported. The results demonstrated that calcium peroxide nanoparticles are an efficient oxidant for glyphosate removal from aqueous systems. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Graphical abstract

13 pages, 3730 KiB

Open AccessArticle

Removal of Sulfide Ions from Kraft Washing Effluents by Photocatalysis with N and Fe Codoped Carbon Dots

by Hao Luo, Hao Liu and Chengwu Sun

Polymers 2023, 15(3), 679; https://doi.org/10.3390/polym15030679 - 29 Jan 2023

Cited by 2 | Viewed by 1857

Abstract

N and Fe codoped carbon dots (N,Fe-CDs) were fabricated from citric acid, L-glutamic acid and ferric chloride via a hydrothermal method for the photocatalytic removal of S²⁻ from kraft washing effluents (KWE). The N,Fe-CDs were fluorescent nanoparticles (average size of 3.18 nm) and catalyzed the oxidation of S²⁻ following a first-order kinetic model with an activation energy of 33.77 kJ/mol. The N,Fe-CDs tolerated elevated temperatures as high as 80 °C without catalyst deactivation. The N,Fe-CDs catalysts were reusable for at least four cycles, preserving over 90% of the activity. In the treatment of KWE from the kraft pulping of eucalyptus, the concentration of S²⁻ was decreased by the N,Fe-CDs from 1.19 to 0.41 mmol/L in 6 h. Consequently, near complete remediation was obtained in 24 h. In addition, half of the chemical oxygen demand was removed after treatment with 500 mg/L of the N,Fe-CDs. In addition, the present photocatalyst was safe within a concentration of 200 mg/L, as indicated by the acetylcholinesterase inhibition test. Our findings may help develop a cleaner production process for kraft brownstock washing. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

11 pages, 2273 KiB

Open AccessArticle

Palladium Nanoparticle-Loaded Mesostructural Natural Woods for Efficient Water Treatment

by Zirun Wang, Chao Jia, Hengxue Xiang and Meifang Zhu

Polymers 2023, 15(3), 658; https://doi.org/10.3390/polym15030658 - 27 Jan 2023

Cited by 2 | Viewed by 1877

Abstract

Natural wood with oriented microchannels and unique multi-level structures is an ideal candidate for making water treatment membranes. Here, palladium nanoparticles are loaded into different kinds of natural woods and the degradation property of the wood membranes for organic pollutants are investigated. The water flux of hardwoods is significantly higher than that of softwood due to the existence of large vessel elements. For the single pollutant, both hardwood and softwood show high degradation efficiency for methylene blue and methylene orange, while the degradation efficiency of the softwoods for 4-nitrophenol is significantly higher than that of the hardwoods due to their lower water flux. For the mixed pollutants, all the wood membranes have a good degradation property for different concentrations of methylene blue in polluted water, while the degradation efficiency of high concentration methylene orange and 4-nitrophenol is low. Our work will provide some guidance for the degradation of organic pollutants in actual polluted water. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

12 pages, 4784 KiB

Open AccessArticle

Facile Conversion of Polystyrene Waste into an Efficient Sorbent for Water Purification

by Cuizhu Ye, Ziyan Pan and Yi Shen

Polymers 2022, 14(21), 4477; https://doi.org/10.3390/polym14214477 - 22 Oct 2022

Cited by 4 | Viewed by 2089

Abstract

In this work, we convert a plastic waste, i.e., polystyrene (PS), into a sorbent by a simple sulfonation process. The sulfonation time was optimized and the structures of the resulting sulfonated polystyrene (SPS) was characterized by field emission scanning electron microscopy, energy-dispersive X-ray and contact angle tests. The results showed that the sulfonation time of 7 h can introduce abundant sulfonic groups and preserve the self-standing structure. Additionally, the SPS has a three-dimensional porous structure and hydrophilic surface because of the presence of numerous sulfonic groups, which could serve as effective binding sites for immobilizing varying pollutants. Furthermore, as a proof-of-concept, the adsorption performance of the SPS foams was evaluated using three pollutants, namely Pb²⁺, lysozyme and methylene blue. The adsorption isotherms were fitted by the Langmuir and Freundlich models, while the kinetics of the adsorption processes were analyzed using the pseudo-first-order, pseudo-second-order and intraparticle diffusion equations. It was found that the adsorption isotherms of Pb²⁺ and lysozyme can be better described by the Langmuir model, leading to maximum equilibrium adsorption uptakes of 10.5 and 15.7 mg g⁻¹ for the adsorption of Pb²⁺ and lysozyme, respectively. Importantly, the pollutant-saturated SPS is readily regenerated by acid washing, and the recovered sorbents exhibit outstanding cyclic performance. The abundant availability of feedstock, facile preparation and regeneration processes render the SPS foams a promising sorbent for practical applications. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

28 pages, 4424 KiB

Open AccessEditor’s ChoiceArticle

Modeling of Hexavalent Chromium Removal with Hydrophobically Modified Cellulose Nanofibers

by Francisco de Borja Ojembarrena, Jose Luis Sánchez-Salvador, Sergio Mateo, Ana Balea, Angeles Blanco, Noemí Merayo and Carlos Negro

Polymers 2022, 14(16), 3425; https://doi.org/10.3390/polym14163425 - 22 Aug 2022

Cited by 10 | Viewed by 2684

Abstract

Cellulose nanofibers (CNF) are sustainable nanomaterials, obtained by the mechanical disintegration of cellulose, whose properties make them an interesting adsorbent material due to their high specific area and active groups. CNF are easily functionalized to optimize the performance for different uses. The hypothesis of this work is that hydrophobization can be used to improve their ability as adsorbents. Therefore, hydrophobic CNF was applied to adsorb hexavalent chromium from wastewater. CNF was synthetized by TEMPO-mediated oxidation, followed by mechanical disintegration. Hydrophobization was performed using methyl trimetoxysilane (MTMS) as a hydrophobic coating agent. The adsorption treatment of hexavalent chromium with hydrophobic CNF was optimized by studying the influence of contact time, MTMS dosage (0–3 mmol·g⁻¹ CNF), initial pH of the wastewater (3–9), initial chromium concentration (0.10–50 mg·L⁻¹), and adsorbent dosage (250–1000 mg CNF·L⁻¹). Furthermore, the corresponding adsorption mechanism was identified. Complete adsorption of hexavalent chromium was achieved with CNF hydrophobized with 1.5 mmol MTMS·g⁻¹ CNF with the faster adsorption kinetic, which proved the initial hypothesis that hydrophobic CNF improves the adsorption capacity of hydrophilic CNF. The optimal adsorption conditions were pH 3 and the adsorbent dosage was over 500 mg·L⁻¹. The maximum removal was found for the initial concentrations of hexavalent chromium below 1 mg·L⁻¹ and a maximum adsorption capacity of 70.38 mg·g⁻¹ was achieved. The kinetic study revealed that pseudo-second order kinetics was the best fitting model at a low concentration while the intraparticle diffusion model fit better for higher concentrations, describing a multi-step mechanism of hexavalent chromium onto the adsorbent surface. The Freundlich isotherm was the best adjustment model. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

Review

Jump to: Research

18 pages, 1976 KiB

Open AccessReview

Development Status of Solar-Driven Interfacial Steam Generation Support Layer Based on Polymers and Biomaterials: A Review

by Haipeng Yan, Pan Wang, Lingsha Li, Zixin Zhao, Yang Xiang, Haoqian Guo, Boli Yang, Xulin Yang, Kui Li, Ying Li, Xiaohong He and Yong You

Polymers 2024, 16(17), 2427; https://doi.org/10.3390/polym16172427 - 27 Aug 2024

Viewed by 661

Abstract

With the increasing shortage of water resources and the aggravation of water pollution, solar-driven interfacial steam generation (SISG) technology has garnered considerable attention because of its low energy consumption, simple operation, and environmental friendliness. The popular multi-layer SISG evaporator is composed of two basic structures: a photothermal layer and a support layer. Herein, the support layer underlies the photothermal layer and carries out thermal management, supports the photothermal layer, and transports water to the evaporation interface to improve the stability of the evaporator. While most research focuses on the photothermal layer, the support layer is typically viewed as a supporting object for the photothermal layer. This review focuses on the support layer, which is relatively neglected in evaporator development. It summarizes existing progress in the field of multi-layer interface evaporators, based on various polymers and biomaterials, along with their advantages and disadvantages. Specifically, mainly polymer-based support layers are reviewed, including polymer foams, gels, and their corresponding functional materials, while biomaterial support layers, including natural plants, carbonized biomaterials, and other innovation biomaterials are not. Additionally, the corresponding structure design strategies for the support layer were also involved. It was found that the selection and optimal design of the substrate also played an important role in the efficient operation of the whole steam generation system. Their evolution and refinement are vital for advancing the sustainability and effectiveness of interfacial evaporation technology. The corresponding potential future research direction and application prospects of support layer materials are carefully presented to enable effective responses to global water challenges. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Figure 1

15 pages, 1736 KiB

Open AccessReview

Advances in Hydrogel Polymers for Microbial Control in Water Systems

by Adenike A. Akinsemolu and Helen Onyeaka

Polymers 2024, 16(15), 2205; https://doi.org/10.3390/polym16152205 - 2 Aug 2024

Viewed by 1324

Abstract

Every year, contaminated water is responsible for over one million deaths globally. Microbiology leads other fields in the development of solutions to water contamination to reduce these deaths while advancing the achievement of SDG 6, which aims to ensure universal access to water and sanitation. This article explores hydrogel polymers as a solution to water contamination through microbial control. Using a systematic approach, this study collects, reviews, analyzes, and synthesizes the findings of studies on the structure, properties, and mechanisms used by hydrogel polymers in pathogen control in water systems, emphasizing recent advances in microbiology that have improved the antimicrobial properties of hydrogel polymers, enhanced their synthetic properties, and improved their overall ability to control the spread of pathogens in water. Other additional notable findings, including the applications of hydrogel polymers in water systems, the environmental implications of using the method to decontaminate and purify water for various purposes, and the regulatory standards needed to reinforce the viability and effectiveness of the adaptation of hydrogel polymers for the control of harmful or unwanted microorganisms in water systems, inform the presented inferences on the future of hydrogel technologies and new opportunities for the expansion of their commercial use. Full article

(This article belongs to the Special Issue Polymeric Materials for Wastewater Treatment Applications)

► Show Figures

Journal Menu

Journal Browser

Polymeric Materials for Wastewater Treatment Applications

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (12 papers)

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI