Solar

This paper focuses on the analytical modeling of albedo reflection in bifacial photovoltaic modules, with particular emphasis on the backside. First, we critically examine the approaches proposed in the literature, presenting them with a tutorial style and a uniform nomenclature. These approaches are demonstrated to yield physically meaningless results, as they erroneously assume that the ground area shaded by the module acts as a source of reflected irradiance independent of the portion of sky dome visible to such an area. Then we introduce a correction based on the view factor between the shaded area and the sky. The result is a comprehensive and accurate analytical model that also describes the case of suspended panels and can be easily implemented into PV plant simulators. Full article

This study presents an advanced defect detection approach for solar cells using the YOLOv10 deep learning model. Leveraging a comprehensive dataset of 10,500 solar cell images annotated with 12 distinct defect types, our model integrates Compact Inverted Blocks (CIBs) and Partial Self-Attention (PSA) modules to enhance feature extraction and classification accuracy. Training on the Viking cluster with state-of-the-art GPUs, our model achieved remarkable results, including a mean Average Precision ([email protected]) of 98.5%. Detailed analysis of the model’s performance revealed exceptional precision and recall rates for most defect classes, notably achieving 100% accuracy in detecting black core, corner, fragment, scratch, and short circuit defects. Even for challenging defect types such as a thick line and star crack, the model maintained high performance, with accuracies of 94% and 96%, respectively. The Recall–Confidence and Precision–Recall curves further demonstrate the model’s robustness and reliability across varying confidence thresholds. This research not only advances the state of automated defect detection in photovoltaic manufacturing but also underscores the potential of YOLOv10 for real-time applications. Our findings suggest significant implications for improving the quality control process in solar cell production. Although the model demonstrates high accuracy across most defect types, certain subtle defects, such as thick lines and star cracks, remain challenging, indicating potential areas for further optimization in future work. Full article

A novel spectral-corrected Performance Ratio calculation method that aligns the short-term Performance Ratio calculation to the annual calculated Performance Ratio is presented in this work. The spectral-corrected Performance Ratio allows short-term measurements to reasonably estimate the annual Performance Ratio, which decreases the need for long-term measures and data storage and assists with routine maintenance checkups. The piece-wise empirical model incorporates two spectral variables, a geographical location-based variable, the air mass, a PV-technology-based variable, and a newly defined spectral correction factor that results in a universal application. The spectral corrections show significant improvements, resulting in errors across different air mass and clearness index ranges, as well as temporal resolutions. The results indicate that a spectral correction methodology is possible and a viable solution to estimate the annual Performance Ratio. The results further indicate that by correcting the spectrum, short-term measurements can be used to predict the annual Performance Ratio with superior performance compared to the well-known normal and weather-corrected PR calculation methods. This approach is the first documented effort to address the spectrum’s influence on the utility-scale Performance Ratio calculation from hourly measurements. The empirical formula suggested for the Performance Ratio calculation can be of extreme value for the real-time monitoring of PV systems and enhancing PV power forecasting accuracy when the spectrum is considered instead of its usual omission. The model can be universally applicable, as it incorporates location and technology, marking a groundbreaking start to comprehending and incorporating the spectral influence in utility-scale PV systems. The novel calculation has widespread application in the PV industry, performance modelling, monitoring, and forecasting. Full article

This paper reports on the correlation between broken contact fingers and the shape of the current–voltage (I–V) curve of a photovoltaic (PV) module. It was found that the broken contact fingers of a solar cell in the PV module cause a noticeable change in the I–V curve of the PV module when the solar cell was partially shaded. The broken contact fingers were inspected by microscopic imaging and electroluminescence (EL) imaging, and a further investigation was carried out using a single solar cell. The results show that the fill factor of the cell decreased from 0.75 of full contact to 0.47 after 16 contact fingers were broken, confirming the correlation between the I–V curve shape and broken contact fingers. This result reveals that the shape of the I–V curve of a PV module under individual-cell partial shading may be used as an indicator of broken contact fingers, which offers an alternative approach to EL imaging for detecting broken contact fingers in PV modules in daylight. Full article

The optimization of photovoltaic (PV) systems is vital for enhancing efficiency and economic viability, especially under Partial Shading Conditions (PSCs). This study focuses on the development and comparison of traditional and advanced algorithms, including Perturb and Observe (P&O), Incremental Conductance (IC), Fuzzy Logic Control (FLC), Grey Wolf Optimization (GWO), Particle Swarm Optimization (PSO), and Artificial Neural Networks (ANN), for efficient Maximum Power Point Tracking (MPPT). Simulations conducted in the MATLAB/Simulink software package evaluated these algorithms’ performances under various shading scenarios. The results indicate that, while traditional methods like P&O and IC are effective under uniform conditions, advanced techniques, particularly ANN-based MPPT, exhibit superior efficiency and faster convergence under PSCs. This study concludes that integrating Artificial Intelligence (AI) and Machine Learning (ML) into MPPT algorithms significantly enhances the reliability and efficiency of PV systems, paving the way for a broader adoption of solar energy technologies in diverse environmental conditions. These findings contribute to advancing renewable energy technology and supporting green energy transition. Full article

One important aspect to consider when buying a house or apartment is adequate solar exposure. The same applies to the evaluation of the shadowing effects of existing buildings on prospective construction sites and vice versa. In different climates and seasons, it is not always easy to assess if there will be an excess or lack of sunlight, and both can lead to discomfort and excessive energy consumption. The aim of our project is to design a method to quantify the availability of direct sunlight to answer these questions. We developed a tool in Octave to calculate representative parameters, such as sunlight hours per day over a year and the times of day for which sunlight is present, considering the surrounding objects. The apparent sun position over time is obtained from an existing algorithm and the surrounding objects are surveyed using a picture taken with a 360° camera from a window or other sunlight entry area. The sky regions in the picture are detected and all other regions correspond to obstructions to direct sunlight. The sky detection is not fully automatic, but the sky swap tool in the camera software could be adapted by the manufacturer for this purpose. We present the results for six representative test cases. Full article

Concentrated photovoltaic (CPV) technology is based on the principle of concentrating direct sunlight onto small but very efficient photovoltaic (PV) cells. This approach allows the realization of PV modules with conversion efficiencies exceeding 30%, which is significantly higher than that of the flat panels. However, to achieve optimal performance, these modules must always be perpendicular to solar radiation; hence, they are mounted on high-precision solar trackers. This requirement has led to the predominant use of CPV technology in the construction of solar power plants in open and large fields for utility scale applications. In this paper, the authors present a novel approach allowing the use of this technology for residential installations, mounting the system both on flat and sloped roofs. Therefore, the main components of cell and primary lens have been chosen to contain the dimensions and, in particular, the thickness of the module. This paper describes the main design steps: thermal analysis allowed the housing construction material to be defined to contain cell working temperature, while with deep optical studies, experimentally validated main geometrical and functional characteristics of the CPV have been identified. The design of a whole CPV system includes thermal storage for domestic hot water and a 1 kWh electrical battery. The main design results indicate an estimated electrical conversion efficiency of 30%, based on a cell efficiency of approximately 42% under operational conditions and a measured optical efficiency of 74%. The CPV system has a nominal electric output of 550 W_p and can simultaneously generate 630 W of thermal power, resulting in an overall system efficiency of 65.5%. The system also boasts high optical acceptance angles (±0.6°) and broad assembly tolerances (±1 mm). Cost analysis reveals higher unit costs compared to conventional PV and CPV systems, but these become competitive when considering the benefit of excess thermal energy recovery and use by the end user. Full article

This paper deals with the problem of determining the optimal capacity of concentrated solar power (CSP) plants, especially in the context of hybrid solar power plants. This work presents an innovative analytical approach to optimizing the capacity of concentrated solar plants. The proposed method is based on the use of additional non-dimensional parameters, in particular, the design factor and the solar multiple factor. This paper presents a mathematical optimization model that focuses on the capacity of concentrated solar power plants where thermal storage plays a key role in the energy source. The analytical approach provides a more complete understanding of the design process for hybrid power plants. In addition, the use of additional factors and the combination of the proposed method with existing numerical methods allows for more refined optimization, which allows for the more accurate selection of the capacity for specific geographical conditions. Importantly, the proposed method significantly increases the speed of computation compared to that of traditional numerical methods. Finally, the authors present the results of the analysis of the proposed system of equations for calculating the levelized cost of electricity (LCOE) for hybrid solar power plants. The nonlinearity of the LCOE on the main calculation parameters is shown. Full article

Grid-connected PV inverters require sophisticated control procedures for smooth integration with the modern electrical grid. The ability of FCS-MPC to manage the discrete character of power electronic devices is highly acknowledged, since it enables direct manipulation of switching states without requiring modulation techniques. This review discusses the latest approaches in FCS-MPC methods for PV-based grid-connected inverter systems. It also classifies these methods according to control objectives, such as active and reactive power control, harmonic suppression, and voltage regulation. The application of FCS-MPC particularly emphasizing its benefits, including quick response times, resistance to changes in parameters, and the capacity to manage restrictions and nonlinearities in the system without the requirement for modulators, has been investigated in this review. Recent developments in robust and adaptive MPC strategies, which enhance system performance despite distorted grid settings and parametric uncertainties, are emphasized. This analysis classifies FCS-MPC techniques based on their control goals, optimal parameters and cost function, this paper also identifies drawbacks in these existing control methods and provide recommendation for future research in FCS-MPC for grid-connected PV-inverter systems. Full article

Australia aims to achieve net zero emissions by 2050, with an interim target of reducing emissions to 43% below 2005 levels by 2030. Electrification of industry processes currently reliant on fossil fuels is a necessary step to achieve these emission reduction goals. This study investigates electrification of steam generation relevant to major industrial operations in the southwest of Western Australia using different renewable energy input levels. The designed system incorporates thermal storage to ensure continuous steam generation. The optimized technology mix, including wind, PV, and concentrated solar thermal (CST) systems for each renewable energy input target, is presented. The optimization process also identifies optimal locations for new renewable energy plants. In summary, the optimization tends towards favouring the development of large CST plants near a demand point. This avoids the use of the transmission network by direct use of the CST system for heating of the storage media, to address the costs and efficiency reductions arising from electrical heating, but the scope of CST use is expected to be limited by site constraints. The levelized cost of heat (LCOH) for the studied renewable energy input targets (i.e., 30–90%) ranges from 15.34 to 36.92 AUD/GJ. This is promising for the 30% renewable energy target, as future natural gas prices in Western Australia are likely to match or exceed the expected LCOH. Cost reductions for renewable generation and storage technologies with further implementation at a large scale in the future may result in more competitive LCOH at higher decarbonization levels, but it is likely that additional technologies will be required for cost competitiveness at very high decarbonization levels. Full article

The aim of this paper is to apply all the existing pyranometric methods to estimate the sunshine duration from global solar irradiation in order to find the most suitable method for a tropical site in its original form. Then, in a second step, one of these methods will be optimized to effectively fit tropical sites. Five methods in the literature (Step algorithm, Carpentras Algorithm, Slob and Monna Algorithm, Slob and Monna 2 Algorithm, and linear algorithm) were applied with eleven years of global and diffuse solar radiation data. As a result, with regard to its original form, the step algorithm is in the first rank. But in the second step, after improving its main coefficients, the Carpentras Algorithm was found to be the best algorithm for tropical sites in the southern hemisphere. Full article

This study presents a compact educational photovoltaic/thermal (PV/T) system designed for thorough performance assessment under simulated weather conditions. As an affordable educational tool, the system offers significant pedagogical value. The PV/T system features two photovoltaic modules: a thermally enhanced module and a standard one. The thermally enhanced module uses water as a coolant, which transfers heat from the PV cells to a fan-operated heat exchanger, with the coolant being recirculated to maintain optimal conditions. A halogen lamp, placed between the modules, simulates solar radiation to ensure effective electrical current generation. The system’s remote-control capabilities, managed via the Message Queuing Telemetry Transport (MQTT) protocol, enable real-time adjustments to the coolant flow rate, heat exchanger efficiency, and lamp brightness, as well as monitoring of electrical parameters. Experimental findings indicate that the PV/T module achieves a 7.71% increase in power output compared to the standard PV module and offers a 17.41% improvement in cooling efficiency over scenarios without cooling. Additionally, the numerical methods used in the study show a maximum deviation of 4.29% from the experimental results, which is considered acceptable. This study showcases a best practice model for solar training, applicable from elementary to university levels, and suggests innovative approaches to enhancing solar energy education. Full article

As photovoltaic (PV) deployment increases worldwide, PV systems are being installed more frequently in locations that experience snow cover. The higher albedo of snow, relative to the ground, increases the performance of PV systems in northern and high-altitude locations by reflecting more light onto the PV modules. Accurate modeling of the snow’s albedo can improve estimates of PV system production. Typical modeling of snow albedo uses a simple two-value model that sets the albedo high when snow is present, and low when snow is not present. However, snow albedo changes over time as snow settles and melts and a binary model does not account for transitional changes, which can be significant. Here, we present and validate a model for estimating snow albedo as it changes over time. The model is simple enough to only require daily snow depth and hourly average temperature data, but can be improved through the addition of site-specific factors, when available. We validate this model to quantify its ability to more accurately predict snow albedo and compare the model’s performance against satellite imagery-based methods for obtaining historical albedo data. In addition, we perform modeling using the System Advisor Model (SAM) to show the impact of changes in albedo on energy modeling for PV systems. Overall, our albedo model has a significantly improved ability to predict the solar insolation on PV modules in real time, especially on bifacial PV modules where reflected irradiance plays a larger role in energy production. Full article

The Italian industrial sector contains 22% of the final energy demand due to the poor energy performance of manufacturing buildings. This proposed study aimed to evaluate retrofit interventions for existing industrial buildings integrating photovoltaic solutions into the external envelope to improve both the environmental sustainability and the facade performance. The methodology is based on an innovative procedure including BIM and generative design tools. Starting from the Revit model of a representative case study, interoperability with energy analysis plugins via Grasshopper were exploited to optimize the differently oriented facade layout of photovoltaic modules to maximize the electricity production. In the case of comparable facade sizes, the building orientation had a minor impact on the results, although a southern exposure was preferable. The optimized configuration involved the installation of PV panels with a tilt angle ranging from −35° to −75°. The best compromise solution between the panel surface area and energy production during the summer solstice involves 466 m² of PV modules. The design-optioneering approach was used to define possible alternatives to be explored for the possible installation of solar shading systems on existing windows. In this case, the impact on visual comfort within the working environment was chosen as a reference parameter, along with the value of the indoor air temperature. A decrease in this parameter equal to 0.46 was registered for the solution with horizontal (or nearly horizontal) shaders and a spacing ranging between 0.2 and 0.4. The integration of the BIM environment with generative design tools effectively assists decision-making processes for the selection of technological solutions in the building sector. Full article

The growth of renewables in public energy networks requires suitable strategies to assess the stable operation of the respective power electronic devices, e.g., inverters. Different assessment methods can be performed with regard to the available knowledge and the assessment objective, e.g., a specific frequency range or the input signal characteristics that are typically classified into small-signal and large-signal disturbances. This paper addresses the limits of the measurement-based small-signal stability analysis in the harmonic frequency range of commercially available single-phase inverters for photovoltaic applications. The harmonic stability is analyzed, and the results for a sinusoidal background voltage and distorted background voltages are assessed based on measurements. The measurements prove that even in the harmonic frequency range, the harmonic stability analysis can only provide a sufficient but not a necessary condition in terms of the statement towards an instable operation. Full article

This review presents an investigation into the incremental advancements in the YOLO (You Only Look Once) architecture and its derivatives, with a specific focus on their pivotal contributions to improving quality inspection within the photovoltaic (PV) domain. YOLO’s single-stage approach to object detection has made it a preferred option due to its efficiency. The review unearths key drivers of success in each variant, from path aggregation networks to generalised efficient layer aggregation architectures and programmable gradient information, presented in the latest variant, YOLOv10, released in May 2024. Looking ahead, the review predicts a significant trend in future research, indicating a shift toward refining YOLO variants to tackle a wider array of PV fault scenarios. While current discussions mainly centre on micro-crack detection, there is an acknowledged opportunity for expansion. Researchers are expected to delve deeper into attention mechanisms within the YOLO architecture, recognising their potential to greatly enhance detection capabilities, particularly for subtle and intricate faults. Full article

As the demand for renewable energy sources continues to increase, solar energy is becoming an increasingly popular option. Therefore, effective training in solar energy systems design and operation is crucial to ensure the successful implementation of solar energy technology. To make this training accessible to a wide range of people from different backgrounds, it is important to develop effective and engaging training methods. Immersive virtual reality (VR) has emerged as a promising tool for enhancing solar energy training and education. In this paper, a unique method is presented to evaluate the effectiveness of an immersive VR experience for solar energy systems design using a multi-modal approach that includes a detailed analysis of user engagement. To gain a detailed analysis of user engagement, the VR experience was segmented into multiple scenes. Moreover, an eye-tracker and wireless wearable sensors were used to accurately measure user engagement and performance in each scene. The results demonstrate that the immersive VR experience was effective in improving users’ understanding of solar energy systems design and their ability to perform complex tasks. Moreover, by using sensors to measure user engagement, specific areas that required improvement were identified and insights for enhancing the design of future VR training experiences for solar energy systems design were provided. This research not only advances VR applications in solar energy education but also offers valuable insights for designing effective and engaging training modules using multi-modal sensory input and real-time user engagement analytics. Full article

Jordan faces significant, immediate challenges of enhancing energy security while mitigating greenhouse gas emissions. One of the most promising approaches to achieve sustainable development, energy security, and environmental conservation is to increase the integration of renewable energy into electricity generation. To this end, the Jordanian government aims to expand investments in the green energy sector, with solar and wind energy expected to play a crucial role in meeting energy demands and promoting environmental sustainability. This paper aims to examine the distinct dynamics, challenges, obstacles, and potential solutions related to establishing community solar and wind farms in suburban areas of Jordan. It seeks to highlight the opportunities and barriers influencing the adoption of sustainable energy in the country. Evaluation results from engaging 320 key stakeholders were obtained through a questionnaire, and after comprehensive analysis, it became evident that the benefits and positive aspects of solar and wind farms outweigh their drawbacks and obstacles. These insights can be useful in guiding policies and practices to make renewable energy community projects a reality within Jordan’s suburban areas. Additionally, the findings may serve as a valuable benchmark for other regions facing similar challenges in their pursuit of a sustainable energy future. Full article

This research develops and validates new decomposition models for hourly direct Normal Irradiance (DNI) estimations for Southern African data. Localised models were developed using data collected from the Southern African Universities Radiometric Network (SAURAN). Clustered areas within Southern Africa were identified, and the developed cluster decomposition models highlighted the potential advantages of grouping data based on shared geographical and climatic attributes. This clustering approach could enhance decomposition model performance, particularly when local data are limited or when data are available from multiple nearby stations. Further, a regional Southern African decomposition model, which encompasses a wide spectrum of climatic regions and geographic locations, exhibited notable improvements over the baseline models despite occasional overestimation or underestimation. The results demonstrated improved DNI estimation accuracy compared to the baseline models across all testing and validation datasets. These outcomes suggest that utilising a localised model can significantly enhance DNI estimations for Southern Africa and potentially for developing similar models in diverse geographic regions worldwide. The overall metrics affirm the substantial advancement achieved with the regional model as an accurate decomposition model representing Southern Africa. Two stations were used as a validation study, as an application example where no localised model was available, and the cluster and regional models both outperformed the comparative decomposition models. This study focused on validating the model for hourly DNI in Southern Africa within a range of $K_t$-intervals from 0.175 to 0.875, and the range could be expanded and validated for future studies. Implementing accurate decomposition models in developing countries can accelerate the adoption of renewable energy sources, diminishing reliance on coal and fossil fuels. Full article