Data Exchange between Vehicle and Power System for Optimal Charging

A special issue of World Electric Vehicle Journal (ISSN 2032-6653).

Deadline for manuscript submissions: closed (30 June 2024) | Viewed by 5747

Special Issue Editors


E-Mail Website
Guest Editor
Division of Electricity, Department of Electrical Engineering, Uppsala University, 75236 Uppsala, Sweden
Interests: electric vehicles; charging; renewable energy systems

E-Mail Website
Guest Editor
Division of Industrial Engineering and Management, Electrical- and Mechanical Engineering, University West, Trollhättan, Sweden
Interests: electric vehicles; electric motors; renewable energy systems

E-Mail Website
Guest Editor
Division of Electricity, Department of Electrical Engineering, Uppsala University, 75236 Uppsala, Sweden
Interests: electric vehicles; charging; renewable energy systems

Special Issue Information

Dear Colleagues, 

The data sharing between charging/discharging electric vehicles and power systems is important for a successful interaction of the vehicles with the grid. Information exchange is also needed at the design stage, as well as in the control of the electric vehicle motor and battery system. Moreover, data resolution, security, and sustainability aspects need to be taken into account. In the near future, we will likely see different types of electrified vehicles on the market (trucks, cars, boats, aircraft, autonomous vehicles, etc.), new designs in propulsion systems, and smart charging strategies (cable charging, wireless charging, battery swapping, V2G, high-power charging, etc.) for different applications and in different environments (buildings, airports, construction sites, etc.).  

In this context, we welcome you to submit manuscripts in areas such as, but not limited to:

  • Data exchange between electric vehicles and power systems.
  • Data sharing when implementing different charging strategies.
  • Interaction between the motor and the battery system with respect to, e.g., regenerative charging.
  • Vehicle-to-grid (V2G), vehicle-to-everything (V2X), etc., including pros and cons. Smart charging strategies, algorithms, and charging standards.
  • Energy system modelling, including, e.g., renewable energy systems, FEM or real-time simulations, and experimental work.
  • Energy management systems.
  • Security and safety aspects.
  • Equipment and measurement systems for vehicle-grid interaction.

Dr. Jennifer Leijon
Dr. Boel Ekergård
Dr. Valeria Castellucci
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. World Electric Vehicle Journal is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 1400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • electric vehicle charging
  • data exchange
  • power system
  • electric motor
  • security
  • vehicle-to-everything
  • vehicle-to-grid
  • electric vehicle battery system
  • renewable energy systems

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (4 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

20 pages, 5342 KiB  
Article
Optimal EV Charging and PV Siting in Prosumers towards Loss Reduction and Voltage Profile Improvement in Distribution Networks
by Christina V. Grammenou, Magdalini Dragatsika and Aggelos S. Bouhouras
World Electr. Veh. J. 2024, 15(10), 462; https://doi.org/10.3390/wevj15100462 - 11 Oct 2024
Viewed by 760
Abstract
In this paper, the problem of simultaneous charging of Electrical Vehicles (EVs) in distribution networks (DNs) is examined in order to depict congestion issues, increased power losses, and voltage constraint violations. To this end, this paper proposes an optimal EV charging schedule in [...] Read more.
In this paper, the problem of simultaneous charging of Electrical Vehicles (EVs) in distribution networks (DNs) is examined in order to depict congestion issues, increased power losses, and voltage constraint violations. To this end, this paper proposes an optimal EV charging schedule in order to allocate the charging of EVs in non-overlapping time slots, aiming to avoid overloading conditions that could stress the DN operation. The problem is structured as a linear optimization problem in GAMS, and the linear Distflow is utilized for the power flow analysis required. The proposed approach is compared to the one where EV charging is not optimally scheduled and each EV is expected to start charging upon its arrival at the residential charging spot. Moreover, the analysis is extended to examine the optimal siting of small-sized residential Photovoltaic (PV) systems in order to provide further relief to the DN. A mixed-integer quadratic optimization model was formed to integrate the PV siting into the optimization problem as an additional optimization variable and is compared to a heuristic-based approach for determining the sites for PV installation. The proposed methodology has been applied in a typical low-voltage (LV) DN as a case study, including real power demand data for the residences and technical characteristics for the EVs. The results indicate that both the DN power losses and the voltage profile are further improved in regard to the heuristic-based approach, and the simultaneously scheduled penetration of EVs and PVs could yield up to a 66.3% power loss reduction. Full article
(This article belongs to the Special Issue Data Exchange between Vehicle and Power System for Optimal Charging)
Show Figures

Figure 1

33 pages, 15119 KiB  
Article
Optimized Integration of Medium-Voltage Multimegawatt DC Charging Stations: Concepts, Guidelines and Analysis
by Sumanta Biswas, Cham Kpu Gerald, Barbara Herndler, Daniel Stahleder, Yannick Wimmer and Markus Makoschitz
World Electr. Veh. J. 2024, 15(10), 450; https://doi.org/10.3390/wevj15100450 - 3 Oct 2024
Viewed by 2460
Abstract
The integration of multimegawatt fast chargers into local distribution grids is becoming increasingly relevant due to recent initiatives to push for higher charging power, especially for applications like heavy-duty vehicles. However, the high-power capacity of these chargers, especially when multiple units operate simultaneously [...] Read more.
The integration of multimegawatt fast chargers into local distribution grids is becoming increasingly relevant due to recent initiatives to push for higher charging power, especially for applications like heavy-duty vehicles. However, the high-power capacity of these chargers, especially when multiple units operate simultaneously at specific locations, raises several important considerations for the optimal design and integration of multimegawatt fast chargers. These include, for example, power electronics architectures and dedicated designs, grid stability, and the incorporation of renewable energy systems. Thus, this paper provides a comprehensive analysis of the key factors influencing the optimal integration of these ultra-high-power chargers, looking into impacts on medium-voltage (MV) networks, the design considerations for medium-voltage power electronics in DC chargers, and the potential of renewable energy systems to offset grid demand. Additionally, this paper explores the potential high-level communication requirements necessary for efficient and reliable charger operation, including a proposal for a robust communication interface layer stack. This investigation aims to provide a holistic understanding of the challenges and opportunities associated with integrating multimegawatt fast chargers into existing power systems, offering insights into the enhancement of both performance and sustainability. Full article
(This article belongs to the Special Issue Data Exchange between Vehicle and Power System for Optimal Charging)
Show Figures

Figure 1

17 pages, 3082 KiB  
Article
Study of an Electric Vehicle Charging Strategy Considering Split-Phase Voltage Quality
by Fulu Yan, Mian Hua, Feng Zhao and Xuan Liang
World Electr. Veh. J. 2024, 15(7), 315; https://doi.org/10.3390/wevj15070315 - 18 Jul 2024
Viewed by 724
Abstract
Slow-charging electric vehicle (EV) loads are single-phase loads in the power distribution network (PDN). The random access of these EVs to the network brings to the forefront the split-phase voltage quality issues. Therefore, a two-layer EV charging strategy considering split-phase voltage quality is [...] Read more.
Slow-charging electric vehicle (EV) loads are single-phase loads in the power distribution network (PDN). The random access of these EVs to the network brings to the forefront the split-phase voltage quality issues. Therefore, a two-layer EV charging strategy considering split-phase voltage quality is proposed in this paper. Issues with voltage unbalance (VU), split-phase voltage deviation (VD), and split-phase voltage harmonics (VHs) are included in the optimization objective model. An upgraded version of the multi-objective non-dominated sorting genetic algorithm (NSGA-II) is used in the inner layer of the model and to pass the generated EV phase selection scheme to the outer layer. The outer layer consists of a split-phase harmonic current algorithm based on the forward–backward generation method, and feeds the voltage quality calculation results to the inner layer. After several iterations, the optimal EV phase selection scheme can be obtained when the inner layer algorithm satisfies the convergence condition. The results gained for the example indicate that the suggested EV charging approach can effectively handle the PDN’s split-phase voltage quality. Furthermore, it enhances the energy efficiency of PDN operations and promotes further energy consumption. Full article
(This article belongs to the Special Issue Data Exchange between Vehicle and Power System for Optimal Charging)
Show Figures

Figure 1

27 pages, 4090 KiB  
Article
An Effective Strategy for Achieving Economic Reliability by Optimal Coordination of Hybrid Thermal–Wind–EV System in a Deregulated System
by Ravindranadh Chowdary Vankina, Sadhan Gope, Subhojit Dawn, Ahmed Al Mansur and Taha Selim Ustun
World Electr. Veh. J. 2024, 15(7), 289; https://doi.org/10.3390/wevj15070289 - 28 Jun 2024
Cited by 1 | Viewed by 736
Abstract
This paper describes an effective operating strategy for electric vehicles (EVs) in a hybrid facility that leverages renewable energy sources. The method is to enhance the profit of the wind–thermal–EV hybrid plant while maintaining the grid frequency (fPG) and energy level [...] Read more.
This paper describes an effective operating strategy for electric vehicles (EVs) in a hybrid facility that leverages renewable energy sources. The method is to enhance the profit of the wind–thermal–EV hybrid plant while maintaining the grid frequency (fPG) and energy level of the EV battery storage system. In a renewable-associated power network, renewable energy producers must submit power supply proposals to the system operator at least one day before operations begin. The market managers then combine the power plans for the next several days based on bids from both power providers and distributors. However, due to the unpredictable nature of renewable resources, the electrical system cannot exactly adhere to the predefined power supply criteria. When true and estimated renewable power generation diverges, the electrical system may experience an excess or shortage of electricity. If there is a disparity between true and estimated wind power (TWP, EWP), the EV plant operates to minimize this variation. This lowers the costs associated with the discrepancy between actual and projected wind speeds (TWS, EWS). The proposed method effectively reduces the uncertainty associated with wind generation while being economically feasible, which is especially important in a deregulated power market. This study proposes four separate energy levels for an EV battery storage system (EEV,max, EEV,opt, EEV,low, and EEV,min) to increase system profit and revenue, which is unique to this work. The optimum operating of these EV battery energy levels is determined by the present electric grid frequency and the condition of TWP and EWP. The proposed approach is tested on a modified IEEE 30 bus system and compared to an existing strategy to demonstrate its effectiveness and superiority. The entire work was completed using the optimization technique called sequential quadratic programming (SQP). Full article
(This article belongs to the Special Issue Data Exchange between Vehicle and Power System for Optimal Charging)
Show Figures

Figure 1

Back to TopTop