1. Introduction
Streptococcus mutans is a gram-positive bacterium commonly found in the human oral cavity. While it is considered part of the normal microbial flora in the oral cavity, it is also the primary causative agent of dental caries [
1,
2]. Despite numerous studies that have been reported and implemented in the past to mitigate dental caries, none of them have succeeded in completely eradicating the disease. Additionally,
S. mutans is known to be associated with extra-oral pathological conditions such as infective endocarditis, IgA nephropathy, cerebral microbleeds, and atherosclerosis [
3,
4]. Therefore, there is a pressing need to develop a practical approach for effectively eliminating
S. mutans. The Darwinian theory postulates that organisms develop resistance to factors that threaten their survival. This phenomenon is a primary driver behind the development of antibiotic resistance in several pathogens [
5]. Hence, it is imperative to develop a treatment that can selectively inhibit the pathogen’s virulence without endangering its overall survival.
One such strategy is controlling the quorum sensing of bacteria. Quorum sensing is a density-dependent bacterial communication mechanism that regulates biofilm formation and the expression of virulent characteristics. Therefore, targeting this mechanism may control their virulence without affecting their survival. Several virulence factors of
S. mutans are involved in quorum sensing mechanisms, and targeting these factors may impair cell communication [
6,
7].
In the sequenced oral pathogen,
S. mutans UA159, the CiaRH two-component signal transduction system (TCS) acts as a global regulator for multiple stress responses, including biofilm formation, acid tolerance, bacteriocin production, genetic competence, stress resistance, and pathogenesis [
8]. Bacterial oligopeptide transport systems (Opp) play a role in regulating ATP hydrolysis and energy generation required for solute transport [
9]. The Sec translocase and yidC are translocase systems that assist in the transport of proteins across the cell membrane [
10]. Another virulent protein of
S. mutans is encoded by the gene smu1784c, which is involved in stress management and biofilm formation [
11].
Regularly used chemical substances such as fluoride, quaternary ammonium salts, and other commonly used antimicrobial agents can lead to undesirable side effects [
12,
13]. Prolonged use of antimicrobial medications has also contributed to the emergence of antimicrobial resistance, which is now recognized as a significant health problem [
14,
15]. Consequently, there has been a growing interest in exploring the potential of natural herbal plants as quorum-quenching agents to combat pathogens [
16,
17,
18]. These natural products offer many advantages, such as reduced costs, fewer side effects, and increased efficacy [
19]. For example, green tea extract has been found to suppress the growth of
Porphyromonas gingivalis, and its potential in preventing and treating periodontitis is being investigated [
15]. Furthermore, aqueous extracts of
Azadirachta indica (Neem) sticks have been shown to inhibit bacterial aggregation, proliferation, adherence to hydroxyapatite, and synthesis of insoluble glucan, thus altering in vitro plaque development [
20]. To expedite the process of identifying molecules with desired antibacterial activity from plant extracts, a time-saving approach is needed. Therefore, computational methods are utilized to accelerate the drug development process. Pharmacoinformatics tools play a crucial role in the rapid discovery of drugs for various diseases, offering a cost-effective approach to drug discovery. Several computer-based tools can be employed to search for potential drug targets in pathogens such as
S. mutans and others.
Furthermore, these tools also aid in the study of drug–target interactions. In the current study, drug targets involved in the quorum sensing of
S. mutans have been selected based on our previous study [
21]. An in silico approach has been undertaken to screen potential phytochemicals from selected plants and to analyze their binding potential with the target proteins.
3. Discussion
Streptococcus mutans is one of the oral commensals that opportunistically cause dental caries. One of the pathogenic mechanisms adopted by S. mutans to cause dental caries is the formation of biofilm on the tooth surface which results in the erosion of tooth enamel through acid production. Biofilm formation requires quorum sensing, a density-dependent communication mechanism. The development of antimicrobial resistance in these pathogens can be avoided by using newer approaches rather than conventional antibiotics. These approaches should control the virulence of the pathogen instead of killing them. Hence, the objective of this study was to develop a compound that can control the quorum sensing in S. mutans rather than killing it. Pharmacoinformatics-based approaches such as drug target identification, molecular docking, and molecular dynamics simulations have accelerated the process of drug discovery. In the present study, we used bioinformatics tools and software to screen phytochemicals from A. indica, M. citrifolia, and S. persica for their potential as anti-quorum sensing agents against the selected target proteins of S. mutans.
The target proteins involved in quorum sensing were selected from our previous study [
21]. These seven targets included CiaR (putative response regulator CiaR), LepC (signal peptidase I), OppC (putative transmembrane protein, permease OppC), SecA (protein translocase subunit SecA), SMU1784c (putative Eep protein-like protein), SMU_659 (putative response regulator SpaR), and YidC2 (membrane protein insertase YidC2). The target protein, CiaR, is a response regulator in a two-component signal transport system that controls several virulent characteristics of
S. mutans. These virulent characteristics include mutacin I activity, oxidative stress tolerance, acid tolerance, and biofilm formation [
22,
23]. Studies on
S. sanguinis showed the development of a fragile biofilm as a result of the CiaR mutation, which resulted in decreased polysaccharide synthesis [
24]. The product of the lepC target gene is a signal peptidase that aids in the export of several virulent proteins. It has also been used as a housekeeping gene for several studies [
10,
25]. The target protein, OppC, is an oligopeptide permease of the ABC transporter family. It helps the bacteria to regulate XIP (sig X inducing peptide) production and in competence development [
9,
26]. SecA is a membrane protein translocase that helps the bacteria export proteins, leading to an increase in the virulence of the organism [
10,
27,
28]. Another target, SMU1784c, plays an important role in the management of oxidative and acid stress, EPS production, and biofilm formation [
11]. The SpaR protein is a response regulator of the spa (surface protein antigen) family, which is one of the virulence factors of
S. mutans [
28,
29]. The membrane protein insertase of
S. mutans, Yidc2, helps in EPS production and biofilm formation [
10,
30,
31].
The resolved structures of the target proteins were not available in PDB or any other structural databases. Hence, the SWISS-MODEL online tool was used to predict the 3D structure of target molecules. Once the protein sequence is submitted as a query, SWISS-MODEL performs BLAST against PDB and gives a list of templates. Based on high identity and sequence coverage, five templates were selected for each protein, and the 3D models were built. A similar approach has been followed by researchers who have used SWISS-MODEL to model NOX 2 of
S. mutans by using the crystal structure of NADH oxidase from
S. pyogenes as a template [
32,
33]. Various proteins of
S. mutans that were modeled using SWISS-MODEL include domain V of glucosyltransferase (GTF-SI) [
34]; SMU.63, an amyloid-like secretory protein of
S. mutans [
35]; the Spase I protein and β-sheet-rich N-terminal collagen-binding domain (CBD) of Cnm, a collagen- and laminin-binding surface adhesin protein of
S. mutans [
36,
37]. Since the models are predicted in silico, it requires validation before further processing. Hence, the Ramachandran plot from the structure assessment tool of SWISS-MODEL was used for validation of the predicted structures. All five models had more than 90% residues in the allowed region. The models from other templates with less than 90% residues in the allowed region were rejected. The remaining selected models were taken for further docking studies. The modeled structures of fibronectin/fibrinogen binding protein (FBP) from
S. mutans, phospholipase D (F13) protein of monkeypox virus, 3-chymotrypsin and papain-like proteases of SARS-CoV2, and U box domain-containing protein gene (GsPUB8) from
Glycine soja were all validated using the Ramachandran plot [
38,
39,
40,
41].
Computational drug discovery studies evaluate the binding of ligands with the target protein, but the agonist or antagonistic effect of ligands on the target protein is only validated through in vitro and in vivo experiments [
42,
43]. In the current study, based on an initial screening of 110 compounds using AutoDock, 17 high binders were selected that were found to bind with all the target proteins efficiently. Among the 17 compounds, 15 were from
A. indica, and 1 each from
M. citrifolia and
S. persica. Campesterol, meliantrol, stigmasterol, isofucosterol, and ursolic acid were the top binders specific for the target proteins, CiaR, LepC, OppC, SpaR, and Yidc2, with a binding energy of −8.76, −10.16, −6.75, −9.1, and −9.73 kcal/mol, respectively. Citrostadienol was the high binder against two of the selected targets, SMU1784c and SecA, with a binding score of −8.45 and −9.88 kcal/mol, respectively. The source of ursolic acid is
M. citrifolia, whereas all other leads are constituents of
A. indica. Molecular docking is a versatile tool that is very useful in screening hundreds of compounds before testing the effective ones using in vitro studies. Molecular docking using AutoDock tools has been used previously to study both agonist and antagonist activity of various natural and synthetic ligands. In silico and in vitro agonistic activity of ligands have been studied for the treatment of diabetes [
44,
45], Parkinson’s disease [
46], and cardiac diseases [
47]. The antagonistic activity of ligands against
S. mutans [
48,
49],
Leishmania donovani [
50],
Helicobacter pylori [
51], and SARS-CoV-2 [
52] has also been studied. All these research works corroborate the necessity of in vitro experiments in the validation of computational analysis. However, they also demonstrate that phytocompounds and synthetic compounds can cause competitive or non-competitive inhibition of target proteins involved in microbial diseases.
The RMSD of the protein–ligand complex is plotted to evaluate the stability of the interaction between the protein and the ligand. The RMSD plot of target protein CiaR in complex with its top binding ligand, campesterol, displayed a fluctuation in RMSD up to 7 Å to 13 Å (
Figure 5a). Ligand RMSD was stable, and fluctuations were between 9 and 10.5 Å. The complex of LepC and its top hit ligand meliantrol shows RMSD fluctuation up to 8 and 12 Å (
Figure 5b). Ligand RMSD was stable, and fluctuations were between 4 and 10.6 Å. The simulation of target protein OppC in complex with stigmasterol shows the stability of protein at 9 to 16 Å (
Figure 5c). Ligand RMSD was stable, and fluctuations were between 9 and 1.6 Å. In the SecA–citrostadienol complex, the protein remains stable at 3 to 4 Å (
Figure 5d), whereas the ligand fluctuation is at 14–16 Å and, hence, shows stable interaction between the protein and the ligand. The SMU1784c–citrostadienol complex shows fluctuation up to 2 to 4 Å (
Figure 5e), whereas the ligand fluctuation is at 3–6 Å and, hence, shows stable interaction between the protein and the ligand. The Yidc2 and ursolic acid complex shows good RMSD results. The protein fluctuation is up to 6 Å and the ligand up to 9 Å. The RMSD plot converges from 20 ns till the end of the simulation at 100 ns, thus showing a stable interaction between the protein and the ligand. The hydrogen bond and other interactions plotted in the simulation interactions diagram correlate with the docking results. The hydrogen bond interaction between residues ASP86, LEU155, and PRO101 in CiaR, OppC, and SpaR with their respective ligands was observed both in AutoDock and MD simulations. Similarly, in the LepC protein, amino acid residues ILE69 and GLU178 were observed. In SecA, SMU1784c, and Yidc2 though there were no common residues binding through a hydrogen bond, the same residues bind with ligands through other types of bonds. The highly interacting amino acids were ASP86 of CiaR, ARG182 of LepC, ILE179 of OppC, GLU143 of SecA, ASP237 of SMU_1784c, PRO101 of SpaR, and VAL84 of YidC2. Similarly, molecular dynamic simulations and an energy calculation method have been used by researchers to study the LPXTG sequence in the C-terminus of surface proteins, the substrate of the cysteine transpeptidase sortase A (SrtA) enzyme, to better understand how leucine residue affects the dynamics of the enzyme-substrate complex structure. According to the findings, the substrate’s ‘Leu’ residue appears to be essential for anchoring and guiding the conformational shift of the enzyme SrtA [
53]. Molecular docking and dynamics simulation studies have been exploited to study the inhibition of glucan sucrase-mediated biofilm formation of
S. mutans by thiosemicarbazide derivatives [
54]. Similar techniques have also been used to investigate the stability of phosphodiesterase type 5 (PDE5) in complexes with bioactive compounds from
Mimosa pudica to understand their aphrodisiac performance [
55]. Similarly, a pharmacoinformatics-based molecular docking and dynamics simulation analysis of bioactive components from Indian cuisine, rasam, was conducted against MAPK6 (mitogen-activated protein kinase 6), a family of serine/threonine protein kinases that is crucial in regulating extracellular signaling into a variety of cellular functions, including ROS production [
56].
MM-GBSA also validates the molecular docking and MD simulation studies as it shows binding energy ranging from −49 to −79 kcal/mol in all the protein–ligand complexes studied. MM-GBSA has previously been used to study and validate in silico interaction of ligands with SARS-CoV-2 protease [
57]. A similar MD simulation approach has also been utilized for screening substrate analog inhibitors of L-Ornithine-N5-monooxygenase (PvdA) to control
Pseudomonas aeruginosa infections [
58].
Analysis of ligands for ADMET properties using SwissADME and pkCSM shows that the molecular weight of all six hits was larger than 400g/mol. Only meliantrol was expected to have moderate water solubility. All other hits had low water solubility. The right solvation and absorption into the host body are made possible by the ligands’ solubility. Additionally, it helps with the formulation of the solvent or delivery vehicle. Except for meliantrol, none of the selected compounds exhibited good GI absorption. All the hits broke one out of five of Lipinski’s rules because of their poor solubility. The Bioavailability RADAR plot depicts the overall drug-likeness of the top binding ligands. Meliantrol fulfills all criteria for drug-likeness, while other ligands fail due to their low solubility in water. The BOILED-Egg plot displays all of the hits in the area of intestinal absorption except citrostadienol. None of the ligands were predicted to penetrate the blood–brain barrier. Analysis of ADMET properties of an array of ligands using Swiss ADME and pkCSM tools has been previously followed by many researchers to control
S. mutans biofilm [
59,
60].
5. Conclusions
S. mutans is a major contributor to dental caries. In this study, an in silico approach was employed to identify a plant metabolite with potential efficacy against specific target proteins of S. mutans involved in quorum sensing. The selected target proteins included: Membrane protein insertase YidC 2, Permease OppC, Putative Eep protein-like protein, Putative transmembrane protein, Putative response regulator CiaR, Putative response regulator SpaR, and Signal peptidase I LepC. The three-dimensional models of these target proteins were generated using SWISS-MODEL and validated using the Ramachandran plot. Plant metabolites derived from A. indica (Neem), M. citrifolia (Noni), and S. persica (Miswak) were evaluated for their potential binding affinity to the selected target proteins. Molecular docking studies were performed using AutoDock Tools. From a total of 110 ligands, 6 top hits were identified for each target protein. These ligands, namely campesterol, meliantrol, citrostadienol, stigmasterol, isofucosterol, and ursolic acid, were subjected to molecular simulation analysis to assess their stability and interaction patterns. The highly interacted amino acid residues identified were ASP86, ARG182, ILE179, GLU143, ASP237, PRO101, and VAL84, corresponding to the proteins CiaR, LepC, OppC, SecA, SMU1784c, SpaR, YidC2, respectively. Furthermore, the ADME characteristics of the identified ligands were evaluated using the SwissADME program. Collectively, the results suggest that these phytosterols have the potential to serve as quorum-quenching agents. However, further in vitro analysis is required to confirm their efficacy against S. mutans and to enable their application in the treatment of dental caries.