Next Article in Journal
Electrochemical Performance of Photovoltaic Cells Using HDA Capped-SnS Nanocrystal from bis (N-1,4-Phenyl-N-Morpho-Dithiocarbamato) Sn(II) Complexes
Previous Article in Journal
Genotoxicity of TiO2 Nanoparticles in Four Different Human Cell Lines (A549, HEPG2, A172 and SH-SY5Y)
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 10
Issue 3
10.3390/nano10030413
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Rapid Room-Temperature Synthesis of Mesoporous TiO2 Sub-Microspheres and Their Enhanced Light Harvesting in Dye-Sensitized Solar Cells

by
Mohammad Alduraibi
1,2,*,
Mahmoud Hezam
2,*,
Bader Al-Ruhaimi
1,†,
Ahmed Mohamed El-Toni
2,3,
Ahmad Algarni
1,4,
M. Abdel-Rahman
5,
Wang Qing
6 and
Abdullah Aldwayyan
1,2
1
Physics and Astronomy Department, College of Science, King Saud University, Riyadh 11451, Saudi Arabia
2
King Abdullah Institute for Nanotechnology, King Saud University, Riyadh 11451, Saudi Arabia
3
Central Metallurgical Research and Development Institute, CMRDI, Helwan 11421, Cairo, Egypt
4
National Center for Nanotechnology and Semiconductors, King Abdulaziz City for Science and Technology (KACST), Riyadh 11421, Saudi Arabia
5
Electrical Engineering Department, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia
6
Department of Materials Science and Engineering, National University of Singapore, Singapore 117576, Singapore
*
Authors to whom correspondence should be addressed.
†
Current Address: General Department of Education, Ministry of Education, Riyadh 12612, Saudi Arabia.
Nanomaterials 2020, 10(3), 413; https://doi.org/10.3390/nano10030413
Submission received: 2 January 2020 / Revised: 13 February 2020 / Accepted: 24 February 2020 / Published: 27 February 2020
Browse Figures
Versions Notes

Abstract

:
Submicron sized mesoporous spheres of TiO2 have been a potential alternative to overcome the light scattering limitations of TiO2 nanoparticles in dye-sensitized solar cells (DSSCs). Currently available methods for the growth of mesoporous TiO2 sub-microspheres involve long and relatively high temperature multi-stage protocols. In this work, TiO2 mesoporous sub-microspheres composed of ~5 nm anatase nanocrystallites were successfully synthesized using a rapid one-pot room-temperature CTAB-based solvothermal synthesis. X-Ray Diffraction (XRD) showed that the grown structures have pure anatase phase. Transmission electron microscopy (TEM) revealed that by reducing the surfactant/precursor concentration ratio, the morphology could be tuned from monodispersed nanoparticles into sub-micron sized mesoporous beads with controllable sizes (50–200 nm) and with good monodispersity as well. The growth mechanism is explained in terms of the competition between homogeneous nucleation/growth events versus surface energy induced agglomeration in a non-micelle CTAB-based soft templating environment. Further, dye-sensitized solar cells (DSSCs) were fabricated using the synthesized samples and characterized for their current-voltage characteristics. Interestingly, the DSSC prepared with 200 nm TiO2 sub-microspheres, with reduced surface area, has shown close efficiency (5.65%) to that of DSSC based on monodispersed 20 nm nanoparticles (5.79%). The results show that light scattering caused by the agglomerated sub-micron spheres could compensate for the larger surface areas provided by monodispersed nanoparticles.

1. Introduction

Dye-sensitized solar cells (DSSCs), since invented by O’Regan and Gratzel in 1991 [1], have been a promising low-cost photovoltaic technology [2,3,4,5,6,7]. In a typical DSSC, solar energy photons are absorbed by compliantly absorbing dye molecules that are loaded on a mesoporous film of TiO2 nanoparticles (typically ~20–30 nm). The dye-photogenerated electrons are subsequently injected into the TiO2 nanoparticles, through which they travel to the device photoanode. The TiO2 nanoparticles work, therefore, as an electron acceptor as well as an electron transport medium. The high surface area associated with the morphology of TiO2 nanoparticles plays a vital role in determining the amount of dye loading and therefore the amount of generated electrons. The morphology of TiO2 nanoparticles also determines the transport path which photoelectrons will subsequently take in their journey towards the external circuit through the thick layer of TiO2 nanoparticles [8,9,10].
Besides the effects on dye-loading and electron transport mentioned above, the morphology of TiO2 nanoparticles can have beneficial scattering effects on the incident solar light [11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29]. TiO2 films made of nanoparticles with sizes ~20–30 nm usually exhibit high transparency and weak scattering effects. Because of that, a scattering layer of sub-micron sized TiO2 structures can be beneficially added to the device structure in order to reflect non-absorbed light back into the dye-loaded TiO2 nanoparticles layer. Different morphologies of TiO2 sub-micrometer sized structures have been invented for this purpose, e.g., particles [11,12,13,14,15], voids [16,17], and inverse-opal photonic crystals [18,19,20,21]. Due the remarkably smaller surface area accessible in the scattering layer, it can only negligibly contribute to the dye adsorption process. An elegant improvement idea has been to alternatively deposit a TiO2 layer made of mesoporous sub-micron beads, resulting in a bi-functional TiO2 layer that efficiently works both as a light scatterer and a dye loader [22,23,24,25,26,27,28,29]. The literature on such bi-functional scattering layers mostly report them as an additional layer on top of the nanocrystalline TiO2 thin film [22,23,24,25]. Dehong Chen et al., however, reported the use of a single layer of sub-micron sized mesoporous beads that was completely responsible for both dye loading and light scattering [27,28,29]. The work of Dehong Chen et al. continued to attract further research efforts on optimizing the implementation of mesoporous TiO2 microspheres in DSSCs [30,31,32].
The method of Dehong Chen et al. involves an initial relatively long sol-gel step followed by a relatively high temperature (~160–200 °C) solvothermal step [27,28,29,30,31,32]. Following the work of Dehong Chen et al., several synthesis methods were developed by other research groups to simplify the synthesis of mesoporous TiO2 sub-microspheres. Daesub Hwang et al. used electrostatic spray technique to directly agglomerate the commercially available P25 TiO2 nanoparticles into larger mesoporous submicron beads [33]. Dapeng Wu et al. similarly started with P25 nanoparticles in order to synthesize TiO2 microspheres that are composed of anatase nanospindles through a multi-step heating approach [34]. Hong-En Wang et al. replaced the solvothermal step by a shorter microwave heating process [35]. Yong Liu et al. reported the successful synthesis of strikingly radially oriented mesoporous TiO2 microspheres using a long but relatively low-temperature evaporation-driven assembly method [36]. Zhao-Qian Li et al. could effectively eliminate the first sol-gel step by using different alcoholic solvents [37,38] performing the solvothermal reaction step at 200 °C.
This work reports a novel method for a rapid room-temperature synthesis of anatase TiO2 nanocrystals (~5–20 nm) that can controllably agglomerate into bigger sub-micron sized beads (50–200 nm) with good control over their size. The samples are implemented in DSSCs, where light scattering in the agglomerated nanospheres is shown to play an important role for light harvesting. Literally, the smaller surface area available for dye-loading in bigger agglomerates could be compensated by their enhanced light scattering.

2. Materials and Methods

All chemicals used in the synthesis were of analytical grade and purchased from SigmaAldrich. They were used without any further purification. First, 6 mM of Hexadecyltrimethylammonium bromide (CTAB) solution was prepared in a mixture of ethanol and DI-water, volume ratio 3:5, and stirred for 30 min. During the stirring process of CTAB solution, the precursor solution was separately prepared by dissolving Tetrabutyl titanate (TBO) in ethanol with concentrations of 60, 120, and 600 µM for samples S1, S2, S3, respectively. The volume ratio between the CTAB solution and the TBO solution was kept at 7:1 for all three samples. The TBO solution was drop-wisely added to the CTAB solution at a rate of ~1 mL/min, and the whole mixed solution was vigorously stirred for two hours. All above steps were carried out under ambient conditions of room temperature and pressure. The resulting solution containing the TiO2 samples was filtered and washed thoroughly with de-ionized water and ethanol and dried under vacuum at 60 °C.
Transmission Electron Microscopy (TEM) and high resolution TEM (HRTEM) measurements were carried out using JEOL JEM-2100F HRTEM operated at 200 kV. Surface area measurements were performed using Quantachrome NOVA 4200e Surface Area & Pore Size Analyzer. All samples were analysed using N2 adsorption–desorption isotherms at 77 K. The as-grown samples were first heat-treated using the same heating steps used to prepare the DSSC electrodes (mentioned below) in order to maintain conditions that are similar to those in the working device. Before taking the adsorption–desorption isotherms, the samples were further degassed at 200 °C for 3 h in order to remove any adsorbed vapor. The surface area was calculated from the adsorption isotherms using the Brunauer-Emmett-Teller (BET) method. The pore size distribution was calculated by analysing the desorption isotherms using the Barrett-Joyner-Halanda (BJH) method. XRD characterization was carried out using PANalytical X’Pert PRO MPD X-Ray Diffractometer, with Cu-Kα as the X-ray radiation source (λ = 0.154 nm), and a rating of 40 kV, 15 mA in the θ/2θ mode.
The synthesized TiO2 samples were used to prepare three different TiO2 pastes using a previously reported paste fabrication procedure [3,8]. FTO glasses were cleaned ultrasonically for 30 min by a special detergent solution, then by de-ionized water, and finally by ethanol. The FTO glasses were then placed under hot air stream at 400–500 °C for about 30 min. The prepared pastes were then coated on the cleaned FTO glasses by screen printing using 90 T polyester mesh to print circle-shaped films of 0.28 cm2 area. After that, they were dried at 125 °C for 2–3 min. This process was repeated three times to obtain an overall thickness of ~16 µm for all samples. The TiO2 films were then sintered at 325 °C for 5 min, 375 °C for 5 min, 450 °C for 15 min, and finally at 500 °C for 15 min. The samples were then soaked in 40 mM TiCl4 solution (prepared by dilution of a stock solution that was prepared at 0 °C with 2 M concentration) at 70 °C for 30 min. Then, they were rinsed with water and ethanol and again heated at 500 °C for 15 min. When cooling down to 80 °C, the samples were immersed in N719 dye solution (0.5 mM, in 1:1 volume ratio of acetonitrile and tert-butyl alcohol) and kept there for around 20 h. The counter electrodes were drilled and cleaned by the cleaning process mentioned above. Few drops of H2PtCl6 solution (2 mg of Pt in 1 mL ethanol) were casted on the cleaned FTO glasses, and then heated at 400 °C to make the Pt film. The cell was fabricated after that by using a thermoplastic spacer between the two electrodes and hot pressing to perform the sealing process. The iodine-based electrolyte solution (0.03 M I2, 0.6 M BMII and 0.1 M guanidinium thiocyanate in a mixture of acetonitrile and valeronitrile solvents (volume ratio 85:15)) was introduced between the two electrodes through the drilled hole, which was sealed after that with a thin covering glass.
A Newport class AAA solar simulator was used to provide AM 1.5 G illumination, and light intensity was measured using a calibrated Si reference cell. A Keithley source meter was used for the I-V measurements under the simulated solar illumination, with a Voc-Isc potential direction and a scan rate of 16 mV/s. Incident Photon-to-Current Conversion Efficiency (IPCE) was measured using a 300 W xenon lamp and a spectrometer with 5 nm resolution. The incident photon flux was measured using a calibrated Si photodiode, whereas the collected current was measured using a current amplifier, and both spectrometer and current amplifier were controlled using Newport TRACQ Basic software.

3. Results and Discussion

Figure 1 shows the TEM and HRTEM images of the prepared samples. For the S1 sample, when the surfactant/precursor concentration ratio was the highest, weakly agglomerated nanoparticles with sizes between ~15–20 nm were produced (Figure 1a,b). For sample S2, when the surfactant/precursor concentration ratio was reduced, smaller TiO2 nanocrystallites (with a crystallite size of ~5 nm, Figure 1d) agglomerated into bigger raspberry-like nanoparticles with sizes of ~50 nm, as can be seen in Figure 1c. For sample S3, with the lowest surfactant/precursor concentration ratio, similarly small (~5 nm) crystallites agglomerated into now bigger sub-microspheres with diameters of around 200 nm (Figure 1e,f).
The growth mechanism can be explained in terms of the CTAB and TBO concentrations as the two main parameters affecting the crystallite size and agglomeration degree in the prepared samples. Surfactants are polar molecules that can electrostatically “template” the growth solution medium. One of these surfactants is the cationic surfactant CTAB which has been used for a long time for such soft templating purpose in the preparation of various porous nanomaterials [39]. During the growth process of TiO2 nanocrystallites, precursor ions will be somehow affected by the existence of the polarized surfactant molecules in the solution. The longitudinal CTAB molecules can agglomerate in different shapes, e.g., micelles, based on their concentration. The critical concentration after which the surfactant molecules start forming micelles is called critical micelle concentration (CMC), which is around 0.9 mM for CTAB in pure DI-water [40,41]. Adding ethanol to DI-water increases the CMC value due to the hydrophobic tails of CTAB which interact stronger with ethanol than with pure DI-water [40,41,42]. For 45.3% volume fraction of ethanol in a mixture of ethanol/DI-water, which is the case in this study, CMC can be around 20 mM [41] whereas the overall concentration of CTAB in the reaction mixture is only 5.25 mM for all samples here, which is below the CMC value. Accordingly, we can conclude that there was no formation of CTAB micelles in the growth solutions of all samples.
The growth starts with homogenous nucleation events, whose number and growth rate depend mainly on the initial concentration of the TBO precursor. Therefore, with the lowest TBO concentration used for the preparation of sample S1, it can be assumed that a smaller number of nucleation events occurred during the reaction with slower growth rate and stronger effect of the polar CTAB molecules. This can explain the growth of monodispersed TiO2 nanocrystals with ~15–20 nm crystallite size.
With higher TBO concentrations, which is the case for S2 and S3 samples, more homogenous nucleation events are allowed, and these events become spatially closer as well. Adjacent grown nanoparticles are, therefore, more likely to agglomerate, driven by their high surface energy and spatial proximity, before they can grow bigger. This is indeed what was noticed: larger monodispersed nanocrystals for S1 and smaller agglomerated nanocrystals for S2 and S3. The crystallite sizes for S2 and S3 samples were around ~5 nm (as can be seen in the HRTEM images, Figure 1d,f). For S3, the agglomeration effect becomes larger resulting in larger TiO2 agglomerates of around 200 nm as shown in Figure 1e.
Figure 2 shows the N2 adsorption/desorption isotherms for the three samples along with the pore size distributions in the inset. All samples exhibit Type IV isotherms with hysteresis loops of type H4 according to the IUPAC classification, a behaviour that is often found in agglomerated nanocrystals [43]. Table 1 shows the calculated textural properties of the three samples. Interestingly, sample S3 has around 40% less surface area compared to that of sample S1. Nevertheless, as will be discussed below, the retrieved photocurrents in the two devices were almost the same.
XRD patterns (Figure 3) for all the powder samples could be indexed to the pure anatase TiO2 phase (JCPDS file No. 21-1272). The Scherrer formula was used to estimate the grain size of nanoparticles, and the crystallite sizes were estimated to be 20, 11, and 13 nm for the S1, S2, and S3 samples, respectively. Although overestimated compared to TEM images, the XRD results are broadly in agreement with TEM images: S1 sample showed almost doubled grain size of S2 and S3 samples.
Figure 4 shows the J-V curves of the best DSSC cells made with each sample. A summary of averaged device characteristics is displayed in Table 2. Open circuit voltage (Voc) values did not appreciably change for all three samples. However, a clear variation in the short circuit current density (Jsc) values was observed, which are similarly reflected in the IPCE measurements in Figure 5. The current is highest for sample S1 that has monodispersed nanoparticles of 15–20 nm size. This can be due to the higher surface area of sample S1 resulting in higher dye loading and so higher photocurrent. For sample S2, Jsc is reduced most probably due to the reduced surface area in the sample. Despite a smaller crystallite size compared to S1 (bringing about access to more surface area), the agglomeration effect in sample S2 was evidently dominant resulting in ~22% reduction in photocurrent. Sample S3 has bigger and strongly agglomerated particles, as clearly revealed by the TEM images in Figure 1e and by the reduced surface area compared to S2. The photocurrent density was, however, higher and even very close to that of monodispersed nanoparticles sample S1. This can only be explained by enhanced light scattering in S3.
Light scattering in DSSCs, successfully explained by the Mie scattering theory [44], is an important process to increase the optical path of solar photons inside the device. This is due to the fact that not all incoming light is absorbed by the nanostructured TiO2 film. As mentioned above, a few microns thick scattering layer made of ~300–400 nm TiO2 particles is traditionally added on top of the mesoporous nanostructured TiO2 layer for this purpose. The S3 sample is fabricated using a single TiO2 film composed of the ~200 nm agglomerated spheres, which had a dual function of both dye adsorption and light scattering. Nevertheless, the scattering effect could retrieve 97% of the original photocurrent obtained with the S1 sample. This is an interesting result because of two facts. First, the S3 sample is made of strongly agglomerated spheres that are bigger in size compared to the S2 sample and that have strong inter-agglomeration between the sub-microspheres as well. This definitely results in reduced surface area compared to S2, especially given that both S2 and S3 samples have similar nanocrystallite sizes. Second, a portion of the incident light will initially be reflected at the FTO/TiO2 interface (see Figure 6), which is a negative impact of the scattering effect that is not present if a nanoparticle TiO2 film is present. The useful effects of light scattering take place only thereafter within the mesoporous layer (see Figure 6) increasing the optical path. Therefore, compared to the S2 sample, S3 has reduced surface area and suffers from initial reflection/scattering at the FTO/TiO2 interface. Nonetheless, the scattering within the film itself was efficient enough for S3 to have an enhanced current that is almost equal to the current of the monodispersed sample S1, which has a higher surface area and no expected light scattering. This result illustrates how light scattering can be efficient: despite the initial reflectance and reduced surface area, the scattering effect could retrieve 97% of the original photocurrent. It has to be mentioned that the light scattering effect is not expected to have a significant impact on the light harvesting efficiency for the S2 sample (agglomerate size ~50 nm), as Mie scattering starts to be efficient for scattering particles of sizes only above ~100 nm [45,46,47].

4. Conclusions

In conclusion, we report a novel room-temperature solvothermal method to synthesize mesoporous TiO2 sub-microspheres that showed strong light scattering effects when implanted as photoanodes in dye-sensitized solar cells. The growth mechanism is explained in terms of non-micelle soft templating of TiO2 nanocrystals in a CTAB-based environment. HRTEM and BET surface area measurements confirmed the size and porosity of the prepared samples. When implanted in DSSC devices, the spherical agglomerates of 200 nm size showed strong scattering effects that counter-balanced their reduced surface area and initial reflection at the TiO2/FTO interface compared to 15–20 nm monodispersed TiO2 nanoparticle films.

Author Contributions

M.A. and M.H. conceived the idea; M.A., M.H., A.M.E.-T. and W.Q. designed the experiments; M.H., B.A.-R., A.A. (Ahmad Algarni) and A.M.E.-T. performed the experiments; M.A., M.H., A.M.E.-T. and W.Q. analysed the data; M.A., W.Q. and A.A. (Abdullah Aldwayyan) contributed materials/analysis tools; M.A., M.H. and M.A.-R. wrote the manuscript; M.A., M.H., A.M.E.-T., M.A.-R., W.Q. and A.A. (Abdullah Aldwayyan) revised the manuscript. All authors have read and agreed to the published version of the manuscript.

Funding

The authors extend their appreciation to the Deanship of Scientific Research at King Saud University for funding this work through Research Group No (RG-1440-055).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. O’Regan, B.; Grätzel, M. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 1991, 353, 737–740. [Google Scholar] [CrossRef]
  2. Grätzel, M. Dye-sensitized solar cells. J. Photochem. Photobiol. C Photochem. Rev. 2003, 4, 145–153. [Google Scholar] [CrossRef]
  3. Wang, Q.; Ito, S.; Grätzel, M.; Fabregat-Santiago, F.; Mora-Seró, I.; Bisquert, J.; Bessho, T.; Imai, H. Characteristics of high efficiency dye-sensitized solar cells. J. Phys. Chem. B 2006, 110, 25210–25221. [Google Scholar] [CrossRef]
  4. Hardin, B.E.; Snaith, H.J.; McGehee, M.D. The renaissance of dye-sensitized solar cells. Nat. Photonics 2012, 6, 162. [Google Scholar] [CrossRef]
  5. Ren, Y.; Sun, D.; Cao, Y.; Tsao, H.N.; Yuan, Y.; Zakeeruddin, S.M.; Wang, P.; Grätzel, M. A Stable Blue Photosensitizer for Color Palette of Dye-Sensitized Solar Cells Reaching 12.6% Efficiency. J. Am. Chem. Soc. 2018, 140, 2405–2408. [Google Scholar] [CrossRef] [PubMed]
  6. Zhang, W.; Wu, Y.; Bahng, H.W.; Cao, Y.; Yi, C.; Saygili, Y.; Luo, J.; Liu, Y.; Kavan, L.; Moser, J.E.; et al. Comprehensive control of voltage loss enables 11.7% efficient solid-state dye-sensitized solar cells. Energy Environ. Sci. 2018, 11, 1779–1787. [Google Scholar] [CrossRef] [Green Version]
  7. Cole, J.M.; Pepe, G.; Al Bahri, O.K.; Cooper, C.B. Cosensitization in Dye-Sensitized Solar Cells. Chem. Rev. 2019, 119, 7279–7327. [Google Scholar] [CrossRef]
  8. Ghaithan, H.M.; Qaid, S.M.H.; Hezam, M.; Labis, J.P.; Alduraibi, M.; Bedja, I.M.; Aldwayyan, A.S. Laser induced photocurrent and photovoltage transient measurements of dye-sensitized solar cells based on TiO2 nanosheets and TiO2 nanoparticles. Electrochim. Acta 2016, 212, 992–997. [Google Scholar] [CrossRef]
  9. Mahmood, K.; Swain, B.S.; Amassian, A. Highly efficient hybrid photovoltaics based on hyperbranched three-dimensional TiO2 electron transporting materials. Adv. Mater. 2015, 27, 2859–2865. [Google Scholar] [CrossRef]
  10. Yu, H.; Zhang, S.; Zhao, H.; Xue, B.; Liu, P.; Will, G. High-performance TiO2 photoanode with an efficient electron transport network for dye-sensitized solar cells. J. Phys. Chem. C 2009, 113, 16277–16282. [Google Scholar] [CrossRef]
  11. Hore, S.; Vetter, C.; Kern, R.; Smit, H.; Hinsch, A. Influence of scattering layers on efficiency of dye-sensitized solar cells. Sol. Energy Mater. Sol. Cells 2006, 90, 1176–1188. [Google Scholar] [CrossRef]
  12. Koo, H.J.; Park, J.; Yoo, B.; Yoo, K.; Kim, K.; Park, N.G. Size-dependent scattering efficiency in dye-sensitized solar cell. Inorg. Chim. Acta 2008, 361, 677–683. [Google Scholar] [CrossRef]
  13. Hu, L.; Dai, S.; Weng, J.; Xiao, S.; Sui, Y.; Huang, Y.; Chen, S.; Kong, F.; Pan, X.; Liang, L.; et al. Microstructure design of nanoporous TiO2 photoelectrodes for dye-sensitized solar cell modules. J. Phys. Chem. B 2007, 111, 358–362. [Google Scholar] [CrossRef] [PubMed]
  14. Kang, S.H.; Kim, J.Y.; Kim, H.S.; Koh, H.D.; Lee, J.S.; Sung, Y.E. Influence of light scattering particles in the TiO2 photoelectrode for solid-state dye-sensitized solar cell. J. Photochem. Photobiol. A Chem. 2008, 200, 294–300. [Google Scholar] [CrossRef]
  15. Lee, J.K.; Jeong, B.H.; Jang, S.I.; Kim, Y.G.; Jang, Y.W.; Lee, S.B.; Kim, M.R. Preparations of TiO 2 pastes and its application to light-scattering layer for dye-sensitized solar cells. J. Ind. Eng. Chem. 2009, 15, 724–729. [Google Scholar] [CrossRef]
  16. Hore, S.; Nitz, P.; Vetter, C.; Prahl, C.; Niggemann, M.; Kern, R. Scattering spherical voids in nanocrystalline TiO2—Enhancement of efficiency in dye-sensitized solar cells. Chem. Commun. 2005, 15, 2011–2013. [Google Scholar] [CrossRef]
  17. Trang Pham, T.T.; Bessho, T.; Mathews, N.; Zakeeruddin, S.M.; Lam, Y.M.; Mhaisalkar, S.; Grätzel, M. Light scattering enhancement from sub-micrometer cavities in the photoanode for dye-sensitized solar cells. J. Mater. Chem. 2012, 22, 16201–16204. [Google Scholar] [CrossRef]
  18. Nishimura, S.; Abrams, N.; Lewis, B.A.; Halaoui, L.I.; Mallouk, T.E.; Benkstein, K.D.; Van de Lagemaat, J.; Frank, A.J. Standing wave enhancement of red absorbance and photocurrent in dye-sensitized titanium dioxide photoelectrodes coupled to photonic crystals. J. Am. Chem. Soc. 2003, 125, 6306–6310. [Google Scholar] [CrossRef]
  19. Mihi, A.; Calvo, M.E.; Anta, J.A.; Míguez, H. Spectral response of opal-based dye-sensitized solar cells. J. Phys. Chem. C 2008, 112, 13–17. [Google Scholar] [CrossRef] [Green Version]
  20. Lee, S.H.A.; Abrams, N.M.; Hoertz, P.G.; Barber, G.D.; Halaoui, L.I.; Mallouk, T.E. Coupling of titania inverse opals to nanocrystalline titania layers in dye-sensitized solar cells. J. Phys. Chem. B 2008, 112, 14415–14421. [Google Scholar] [CrossRef]
  21. Han, S.H.; Lee, S.; Shin, H.; Jung, H.S. A quasi-inverse opal layer based on highly crystalline TiO 2 nanoparticles: A new light-scattering layer in dye-sensitized solar cells. Adv. Energy Mater. 2011, 1, 546–550. [Google Scholar] [CrossRef]
  22. Huang, F.; Chen, D.; Zhang, X.L.; Caruso, R.A.; Cheng, Y.B. Dual-function scattering layer of submicrometer-sized mesoporous TiO 2 beads for high-efficiency dyesensitized solar cells. Adv. Funct. Mater. 2010, 20, 1301–1305. [Google Scholar] [CrossRef]
  23. Sun, W.; Sun, K.; Peng, T.; You, S.; Liu, H.; Liang, L.; Guo, S.; Zhao, X.Z. Constructing hierarchical fastener-like spheres from anatase TiO 2 nanosheets with exposed {001} facets for high-performance dye-sensitized solar cells. J. Power Sources 2014, 262, 86–92. [Google Scholar] [CrossRef]
  24. Sun, W.; Peng, T.; Liu, Y.; Yu, W.; Zhang, K.; Mehnane, H.F.; Bu, C.; Guo, S.; Zhao, X.Z. Layer-by-layer self-assembly of tio2 hierarchical nanosheets with exposed {001} facets as an effective bifunctional layer for dye-sensitized solar cells. ACS Appl. Mater. Interfaces 2014, 6, 9144–9149. [Google Scholar] [CrossRef] [PubMed]
  25. Liu, P.; Li, Y.; Hu, Y.; Hou, X.; Li, C. Macro-mesoporous TiO2 Microspheres for Highly Efficient Dye-Sensitized Solar Cells. Ind. Eng. Chem. Res. 2015, 54, 6692–6697. [Google Scholar] [CrossRef]
  26. Park, N.G. Light management in dye-sensitized solar cell. Korean J. Chem. Eng. 2010, 27, 375–384. [Google Scholar] [CrossRef]
  27. Chen, D.; Huang, F.; Cheng, Y.B.; Caruso, R.A. Mesoporous anatase TiO2 beads with high surface areas and controllable pore sizes: A superior candidate for high-performance dye-sensitized solar cells. Adv. Mater. 2009, 21, 2206–2210. [Google Scholar] [CrossRef]
  28. Chen, D.; Cao, L.; Huang, F.; Imperial, P.; Cheng, Y.B.; Caruso, R.A. Synthesis of monodisperse mesoporous titania beads with controllable diameter, high surface areas, and variable pore diameters (14–23 nm). J. Am. Chem. Soc. 2010, 132, 4438–4444. [Google Scholar] [CrossRef]
  29. Sauvage, F.; Chen, D.; Comte, P.; Huang, F.; Heiniger, L.P.; Cheng, Y.B.; Caruso, R.A.; Graetzel, M. Dye-sensitized solar cells employing a single film of mesoporous TiO2 beads achieve power conversion efficiencies over 10%. ACS Nano 2010, 4, 4420–4425. [Google Scholar] [CrossRef]
  30. Heiniger, L.P.; Giordano, F.; Moehl, T.; Grätzel, M. Mesoporous TiO2 beads offer improved mass transport for cobalt-based redox couples leading to high efficiency dye-sensitized solar cells. Adv. Energy Mater. 2014, 4, 1400168. [Google Scholar] [CrossRef]
  31. Ding, Y.; Zhou, L.; Mo, L.; Jiang, L.; Hu, L.; Li, Z.; Chen, S.; Dai, S. TiO2 microspheres with controllable surface area and porosity for enhanced light harvesting and electrolyte diffusion in dye-sensitized solar cells. Adv. Funct. Mater. 2015, 25, 5946–5953. [Google Scholar] [CrossRef]
  32. Huang, Y.; Wu, H.; Yu, Q.; Wang, J.; Yu, C.; Wang, J.; Gao, S.; Jiao, S.; Zhang, X.; Wang, P. Single-Layer TiO2 Film Composed of Mesoporous Spheres for High-Efficiency and Stable Dye-Sensitized Solar Cells. ACS Sustain. Chem. Eng. 2018, 6, 3411–3418. [Google Scholar] [CrossRef]
  33. Hwang, D.; Lee, H.; Jang, S.Y.; Jo, S.M.; Kim, D.; Seo, Y.; Kim, D.Y. Electrospray preparation of hierarchically-structured mesoporous TiO 2 spheres for use in highly efficient dye-sensitized solar cells. ACS Appl. Mater. Interfaces 2011, 3, 2719–2725. [Google Scholar] [CrossRef] [PubMed]
  34. Wu, D.; Wang, Y.; Dong, H.; Zhu, F.; Gao, S.; Jiang, K.; Fu, L.; Zhang, J.; Xu, D. Hierarchical TiO2 microspheres comprised of anatase nanospindles for improved electron transport in dye-sensitized solar cells. Nanoscale 2013, 5, 324–330. [Google Scholar] [CrossRef] [PubMed]
  35. Wang, H.E.; Zheng, L.X.; Liu, C.P.; Liu, Y.K.; Luan, C.Y.; Cheng, H.; Li, Y.Y.; Martinu, L.; Zapien, J.A.; Bello, I. Rapid microwave synthesis of porous TiO2 spheres and their applications in dye-sensitized solar cells. J. Phys. Chem. C 2011, 115, 10419–10425. [Google Scholar] [CrossRef]
  36. Liu, Y.; Che, R.; Chen, G.; Fan, J.; Sun, Z.; Wu, Z.; Wang, M.; Li, B.; Wei, J.; Wei, Y.; et al. Radially oriented mesoporous TiO2 microspheres with single-crystal-like anatase walls for high-efficiency optoelectronic devices. Sci. Adv. 2015, 1, e1500166. [Google Scholar] [CrossRef] [Green Version]
  37. Li, Z.Q.; Que, Y.P.; Mo, L.E.; Chen, W.C.; Ding, Y.; Ma, Y.M.; Jiang, L.; Hu, L.H.; Dai, S.Y. One-Pot Synthesis of Mesoporous TiO2 Micropheres and Its Application for High-Efficiency Dye-Sensitized Solar Cells. ACS Appl. Mater. Interfaces 2015, 7, 10928–10934. [Google Scholar] [CrossRef]
  38. Li, Z.Q.; Chen, W.C.; Guo, F.L.; Mo, L.E.; Hu, L.H.; Dai, S.Y. Mesoporous TiO2 Yolk-Shell Microspheres for Dye-sensitized Solar Cells with a High Efficiency Exceeding 11%. Sci. Rep. 2015, 5, 14178. [Google Scholar] [CrossRef] [Green Version]
  39. Wan, Y.; Zhao, D. On the controllable soft-templating approach to mesoporous silicates. Chem. Rev. 2007, 107, 2821–2860. [Google Scholar] [CrossRef]
  40. Bielawska, M.; Chodzińska, A.; Jańczuk, B.; Zdziennicka, A. Determination of CTAB CMC in mixed water+short-chain alcohol solvent by surface tension, conductivity, density and viscosity measurements. Colloids Surfaces A Physicochem. Eng. Asp. 2013, 424, 81–88. [Google Scholar] [CrossRef]
  41. Li, W.; Han, Y.C.; Zhang, J.L.; Wang, L.X.; Song, J. Thermodynamic modeling of CTAB aggregation in water-ethanol mixed solvents. Colloid J. 2006, 68, 304–310. [Google Scholar] [CrossRef]
  42. Li, W.; Han, Y.C.; Zhang, J.L.; Wang, B.G. Effect of ethanol on the aggregation properties of cetyltrimethylammonium bromide surfactant. Colloid J. 2005, 67, 159–163. [Google Scholar] [CrossRef]
  43. Thommes, M.; Kaneko, K.; Neimark, A.V.; Olivier, J.P.; Rodriguez-Reinoso, F.; Rouquerol, J.; Sing, K.S.W. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl. Chem. 2015, 87, 1051–1069. [Google Scholar] [CrossRef] [Green Version]
  44. Hulst, H.C.; van de Hulst, H.C. Light Scattering by Small Particles; Dover Publications, Inc.: New York, NY, USA, 1981. [Google Scholar]
  45. Ferber, J.; Luther, J. Computer simulations of light scattering and absorption in dye-sensitized solar cells. Sol. Energy Mater. Sol. Cells 1998, 54, 265–275. [Google Scholar] [CrossRef]
  46. Usami, A. Rigorous solutions of light scattering of neighboring TiO2 particles in nanocrystalline films. Sol. Energy Mater. Sol. Cells 1999, 59, 163–166. [Google Scholar] [CrossRef]
  47. Usami, A. Theoretical simulation of light scattering of nanocrystalline films in photoelectrochemical solar cells. Sol. Energy Mater. Sol. Cells 2000, 62, 239–246. [Google Scholar] [CrossRef]
Nanomaterials 10 00413 g001 550
Figure 1. TEM and HRTEM images of sample (a,b) S1 (c,d) S2 (e,f) S3. The scale bars in the TEM images (a,c,e) correspond to 50 nm while the scale bars in the HRTEM images (b,d,f) correspond to 5 nm.
Figure 1. TEM and HRTEM images of sample (a,b) S1 (c,d) S2 (e,f) S3. The scale bars in the TEM images (a,c,e) correspond to 50 nm while the scale bars in the HRTEM images (b,d,f) correspond to 5 nm.
Nanomaterials 10 00413 g001
Nanomaterials 10 00413 g002 550
Figure 2. N2 adsorption–desorption isotherms for the three prepared samples. The scale in the y-axis corresponds to the S1 sample while, for clarity purposes, the S2 and S3 isotherms are scaled up by 100 cm3/g and 200 cm3/g, respectively. The inset shows the pore size distributions for the three samples.
Figure 2. N2 adsorption–desorption isotherms for the three prepared samples. The scale in the y-axis corresponds to the S1 sample while, for clarity purposes, the S2 and S3 isotherms are scaled up by 100 cm3/g and 200 cm3/g, respectively. The inset shows the pore size distributions for the three samples.
Nanomaterials 10 00413 g002
Nanomaterials 10 00413 g003 550
Figure 3. XRD patterns of samples S1, S2, and S3. All samples could be indexed with the JCPDS file No. 21-1272 for anatase TiO2 structure, which is presented as black vertical bars at the bottom of the figure.
Figure 3. XRD patterns of samples S1, S2, and S3. All samples could be indexed with the JCPDS file No. 21-1272 for anatase TiO2 structure, which is presented as black vertical bars at the bottom of the figure.
Nanomaterials 10 00413 g003
Nanomaterials 10 00413 g004 550
Figure 4. J-V curves for best devices fabricated using S1, S2, and S3 samples. The strong scattering effect within the TiO2 layer in the S3 sample could almost retrieve the photocurrent of S1 made of monodispersed TiO2 nanoparticles.
Figure 4. J-V curves for best devices fabricated using S1, S2, and S3 samples. The strong scattering effect within the TiO2 layer in the S3 sample could almost retrieve the photocurrent of S1 made of monodispersed TiO2 nanoparticles.
Nanomaterials 10 00413 g004
Nanomaterials 10 00413 g005 550
Figure 5. Incident Photon-to-Current Conversion Efficiency (IPCE) spectra for DSSCs fabricated using S1, S2, and S3 samples.
Figure 5. Incident Photon-to-Current Conversion Efficiency (IPCE) spectra for DSSCs fabricated using S1, S2, and S3 samples.
Nanomaterials 10 00413 g005
Nanomaterials 10 00413 g006 550
Figure 6. Schematic depicting the expected scattering effects in the DSSC device fabricated using the S3 sample.
Figure 6. Schematic depicting the expected scattering effects in the DSSC device fabricated using the S3 sample.
Nanomaterials 10 00413 g006
Table
Table 1. N2-isotherm-generated textural properties of prepared samples.
Table 1. N2-isotherm-generated textural properties of prepared samples.
SampleSurface Area (m2/g)Pore Volume (cm3/g)Pore Size (nm)
S140.10.2920
S233.90.3228
S323.70.3028
Table
Table 2. A summary of average extracted J-V characteristics for dye-sensitized solar cell (DSSC) devices fabricated using S1, S2, and S3 samples.
Table 2. A summary of average extracted J-V characteristics for dye-sensitized solar cell (DSSC) devices fabricated using S1, S2, and S3 samples.
SampleVoc (V)Jsc (mA/cm2)Pmax (mW/cm2)FFEfficiency (%)
S10.672 ± 0.01713.202 ± 0.3920.963 ± 0.1520.575 ± 0.0935.173 ± 0.870
S20.678 ± 0.0119.987 ± 0.0980.911 ± 0.0190.711 ± 0.0044.912 ± 0.086
S30.676 ± 0.00312.139 ± 0.5451.023 ± 0.0430.659 ± 0.0045.499 ± 0.212

Share and Cite

MDPI and ACS Style

Alduraibi, M.; Hezam, M.; Al-Ruhaimi, B.; El-Toni, A.M.; Algarni, A.; Abdel-Rahman, M.; Qing, W.; Aldwayyan, A. Rapid Room-Temperature Synthesis of Mesoporous TiO2 Sub-Microspheres and Their Enhanced Light Harvesting in Dye-Sensitized Solar Cells. Nanomaterials 2020, 10, 413. https://doi.org/10.3390/nano10030413

AMA Style

Alduraibi M, Hezam M, Al-Ruhaimi B, El-Toni AM, Algarni A, Abdel-Rahman M, Qing W, Aldwayyan A. Rapid Room-Temperature Synthesis of Mesoporous TiO2 Sub-Microspheres and Their Enhanced Light Harvesting in Dye-Sensitized Solar Cells. Nanomaterials. 2020; 10(3):413. https://doi.org/10.3390/nano10030413

Chicago/Turabian Style

Alduraibi, Mohammad, Mahmoud Hezam, Bader Al-Ruhaimi, Ahmed Mohamed El-Toni, Ahmad Algarni, M. Abdel-Rahman, Wang Qing, and Abdullah Aldwayyan. 2020. "Rapid Room-Temperature Synthesis of Mesoporous TiO2 Sub-Microspheres and Their Enhanced Light Harvesting in Dye-Sensitized Solar Cells" Nanomaterials 10, no. 3: 413. https://doi.org/10.3390/nano10030413

APA Style

Alduraibi, M., Hezam, M., Al-Ruhaimi, B., El-Toni, A. M., Algarni, A., Abdel-Rahman, M., Qing, W., & Aldwayyan, A. (2020). Rapid Room-Temperature Synthesis of Mesoporous TiO2 Sub-Microspheres and Their Enhanced Light Harvesting in Dye-Sensitized Solar Cells. Nanomaterials, 10(3), 413. https://doi.org/10.3390/nano10030413

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop