Next Article in Journal
Inertinite Reflectance in Relation to Combustion Temperature
Previous Article in Journal
Analysis of Influence of Excitation Source Direction on Sound Transmission Loss Simulation Based on Alloy Steel Phononic Crystal
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Mu et al. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884

1
College of Food Science and Engineering, Changchun University, Changchun 130022, China
2
School of Chemical Engineering, Changchun University of Technology, Changchun 130023, China
*
Authors to whom correspondence should be addressed.
Processes 2024, 12(11), 2451; https://doi.org/10.3390/pr12112451
Submission received: 30 October 2024 / Accepted: 1 November 2024 / Published: 6 November 2024

Error in Figure 4

In the original publication [1], there was a mistake in Figure 4a as published.
Figure 4. SEM and TEM CSBGC after pickling with various magnifications SEM (a) CSBGC wrapped by annealed and cooled before ferric element removal SEM (b) CSBGC directly prepared from CS SEM (c) and CSBGC TEM (d).
Figure 4. SEM and TEM CSBGC after pickling with various magnifications SEM (a) CSBGC wrapped by annealed and cooled before ferric element removal SEM (b) CSBGC directly prepared from CS SEM (c) and CSBGC TEM (d).
Processes 12 02451 g001
The corrected corn straw picture and caption description from SEM appears below.
Figure 4. SEM and TEM of CS and CSBGC after pickling, shown at various magnifications: (a) SEM image of corn straw. (b) SEM image of CSBGC wrapped, annealed, and cooled before ferric element removal. (c) SEM image of CSBGC directly prepared from CS. (d) TEM image of CSBGC.
Figure 4. SEM and TEM of CS and CSBGC after pickling, shown at various magnifications: (a) SEM image of corn straw. (b) SEM image of CSBGC wrapped, annealed, and cooled before ferric element removal. (c) SEM image of CSBGC directly prepared from CS. (d) TEM image of CSBGC.
Processes 12 02451 g004
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Mu, L.; He, P.; Liu, P. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Mu, L.; He, P.; Liu, P. Correction: Mu et al. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884. Processes 2024, 12, 2451. https://doi.org/10.3390/pr12112451

AMA Style

Mu L, He P, Liu P. Correction: Mu et al. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884. Processes. 2024; 12(11):2451. https://doi.org/10.3390/pr12112451

Chicago/Turabian Style

Mu, Li, Peng He, and Pengfei Liu. 2024. "Correction: Mu et al. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884" Processes 12, no. 11: 2451. https://doi.org/10.3390/pr12112451

APA Style

Mu, L., He, P., & Liu, P. (2024). Correction: Mu et al. Preparation and Characterization of Corn Straw-Based Graphitized Carbon with Ferric Acetylacetonate as Catalyst. Processes 2023, 11, 2884. Processes, 12(11), 2451. https://doi.org/10.3390/pr12112451

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop