Electronics

Research

Jump to: Review, Other

9 pages, 5575 KiB

Open AccessFeature PaperArticle

Fence Shaping of Substrate Integrated Fan-Beam Electric Dipole for High-Band 5G

by Waleed El-Halwagy, Rashid Mirzavand, Jordan Melzer, Masum Hossain and Pedram Mousavi

Electronics 2019, 8(5), 545; https://doi.org/10.3390/electronics8050545 - 15 May 2019

Cited by 5 | Viewed by 3152

Abstract

This work presents fence shaping for dipole antenna operating at 5G high-band frequencies. A via fence is employed around the dipole to suppress back radiation. By varying the geometric shape of the fence, the dipole’s radiation characteristics can be controlled, which adds an [...] Read more.

This work presents fence shaping for dipole antenna operating at 5G high-band frequencies. A via fence is employed around the dipole to suppress back radiation. By varying the geometric shape of the fence, the dipole’s radiation characteristics can be controlled, which adds an additional degree of freedom to the design. This was investigated by studying different fence shapes, namely rectangular-, U-, and V-shaped fences. The wide bandwidth (higher than 6.5 GHz) centered around 28 GHz, and the stable radiation performance from 24 GHz to 32 GHz made the proposed structure capable of supporting multiple 5G frequency bands and the fence shaping help modulate the gain and HPBW of the dipole. All fabricated prototypes attained front-to-back radiation ratio (F/B) higher than 36 dB, with good gain/HPBW performances of 14.1 dBi/103.7°, 13.5dBi/118°, and 12.6 dBi/133° from the V-fence, U-fence, and rectangular fence 4 × 1 arrays, respectively. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

18 pages, 7170 KiB

Open AccessArticle

Slot-Loaded Microstrip Patch Sensor Antenna for High-Sensitivity Permittivity Characterization

by Junho Yeo and Jong-Ig Lee

Electronics 2019, 8(5), 502; https://doi.org/10.3390/electronics8050502 - 7 May 2019

Cited by 53 | Viewed by 9927

Abstract

A slot-loaded microstrip patch sensor antenna is proposed to enhance sensitivity in measuring the permittivity of planar materials. A thin rectangular slot was etched along the radiating edge of a rectangular patch antenna fed by a microstrip transmission line. Two resonant frequencies were [...] Read more.

A slot-loaded microstrip patch sensor antenna is proposed to enhance sensitivity in measuring the permittivity of planar materials. A thin rectangular slot was etched along the radiating edge of a rectangular patch antenna fed by a microstrip transmission line. Two resonant frequencies were created at a lower frequency compared to the single resonant frequency of a conventional ordinary patch antenna. The sensitivity of the proposed slot-loaded patch antenna was measured by the shift in the resonant frequency of the input reflection coefficient when the planar dielectric superstrate was placed above the patch, and was compared with that of a conventional patch antenna without the slot. The two antennas were designed and fabricated on a 0.76 mm-thick RF-35 substrate for the first resonant frequency to resonate at 2.5 GHz under unloaded conditions. Five different standard dielectric samples with dielectric constants ranging from 2.17 to 10.2 were tested for sensitivity comparison. The experiment results showed that the measured sensitivity of the proposed patch antenna were 3.54 to 4.53 times higher, compared to a conventional patch antenna, for the five samples. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

9 pages, 4152 KiB

Open AccessArticle

Dual Band-Notched Rectangular Dielectric Resonator Antenna with Tunable Characteristic

by Beijia Liu, Jinghui Qiu, Lijia Chen and Guoqiang Li

Electronics 2019, 8(5), 472; https://doi.org/10.3390/electronics8050472 - 28 Apr 2019

Cited by 7 | Viewed by 3488

Abstract

A dual band-notched reconfigurable dielectric resonator antenna (DRA) is proposed in this paper. A rectangular dielectric resonator excited by stepped offset microstrip feedline generates multiple resonant modes for wideband performance. Moreover, the typical stepped impedance feedline and partial ground plane with one rectangular [...] Read more.

A dual band-notched reconfigurable dielectric resonator antenna (DRA) is proposed in this paper. A rectangular dielectric resonator excited by stepped offset microstrip feedline generates multiple resonant modes for wideband performance. Moreover, the typical stepped impedance feedline and partial ground plane with one rectangular notch are adopted for contributing for better impedance matching. On this basis, a five-line coupler resonator (FLCR) composed by inverted U-shaped and 山-shaped structures is introduced as a bandstop filter in the microstrip feedline, and dual rejected bands are created. Tunable notched frequencies are achieved by the varactor between these two structures. The proposed antenna size is 24 × 28 × 5.637 mm³. For the presented work, both simulated and measured results for the proposed tunable antenna ranging from 5.3 to 5.84 GHz and from 8.74 to 8.98 GHz within the wide bandwidth of 6.06 GHz are presented, demonstrating the accuracy of this design. There capabilities make the proposed antenna applicable for wideband systems with the requirement of avoiding interferences. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

18 pages, 10084 KiB

Open AccessArticle

A Design Rule to Reduce the Human Body Effect on Wearable PIFA Antennas

by Giovanni Andrea Casula and Giorgio Montisci

Electronics 2019, 8(2), 244; https://doi.org/10.3390/electronics8020244 - 21 Feb 2019

Cited by 26 | Viewed by 5153 | Correction

Abstract

The robustness of wearable Ultra-High Frequency (UHF)-band planar inverted-F Antennas (PIFAs) with respect to coupling with the human body is an extremely difficult challenge for the designer. In this work a design strategy is presented to help the designer to adequately shape and [...] Read more.

The robustness of wearable Ultra-High Frequency (UHF)-band planar inverted-F Antennas (PIFAs) with respect to coupling with the human body is an extremely difficult challenge for the designer. In this work a design strategy is presented to help the designer to adequately shape and extend the antenna ground plane, which has been derived by accurately analyzing the distribution of the electric and magnetic energy densities of the antenna in a region around the antenna borders. The optimal extension of the ground plane will be discussed for three different grounded antennas, both in terms of free space wavelength, and in terms of electric energy density magnitude. Following these rules, the antenna robustness with respect to the coupling with the human body can be significantly improved, but with a minimal impact on the antenna size. The antenna robustness has been successfully tested considering several models for the human phantom in the simulation environment. The numerical simulations, performed using Computer Simulation Technology (CST) Microwave Studio, have been confirmed by experimental data measured for one of the analyzed grounded antenna configurations. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

13 pages, 3065 KiB

Open AccessArticle

Compact UWB Band-Notched Antenna with Integrated Bluetooth for Personal Wireless Communication and UWB Applications

by MuhibUr Rahman, Mahdi NagshvarianJahromi, Seyed Sajad Mirjavadi and Abdel Magid Hamouda

Electronics 2019, 8(2), 158; https://doi.org/10.3390/electronics8020158 - 1 Feb 2019

Cited by 92 | Viewed by 7253

Abstract

A compact band-notched UWB (Ultra-Wide Band) antenna with integrated Bluetooth is developed for personal wireless communication and UWB applications. The antenna operates at the UWB frequency band (3.1–10.6 GHz) as well as Bluetooth (2.4–2.484 GHz), with band-notch characteristics at the Wireless Local Area [...] Read more.

A compact band-notched UWB (Ultra-Wide Band) antenna with integrated Bluetooth is developed for personal wireless communication and UWB applications. The antenna operates at the UWB frequency band (3.1–10.6 GHz) as well as Bluetooth (2.4–2.484 GHz), with band-notch characteristics at the Wireless Local Area Network (WLAN) frequency band (5–6 GHz). A new technique of integrating Bluetooth within a UWB band-notched antenna is developed and analyzed. The UWB frequency band is realized by utilizing a conventional cylindrical radiating patch and a modified partial ground plane. The Bluetooth band is integrated using a miniaturized resonator with the addition of capacitors. Further, to mitigate the interference of the WLAN frequency band within the UWB spectrum, a conventional slot resonator is integrated within the radiator to achieve the task. The antenna is designed and fabricated, and its response in each case is provided. Moreover, the antenna exhibits a good radiation pattern with a stable gain in the passband. The present antenna is also compared to state-of-the-art structures proposed in the literature. The miniaturized dimensions (30 × 31 mm²) of the antenna make it an excellent candidate for UWB and personal wireless communication applications. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

11 pages, 6394 KiB

Open AccessArticle

Low Profile Sinuous Slot Antenna for UWB Sensor Networks

by Ján Gamec, Miroslav Repko, Mária Gamcová, Iveta Gladišová, Pavol Kurdel, Alexey Nekrasov and Colin Fidge

Electronics 2019, 8(2), 127; https://doi.org/10.3390/electronics8020127 - 25 Jan 2019

Cited by 15 | Viewed by 5079

Abstract

This article describes the design and implementation of a low-profile sinuous slot antenna, intended for ultra-wideband (UWB) sensor networks, which can be produced on one conductive layer. The article explains the design and optimization of the sinuous slot antenna and its modifications, including [...] Read more.

This article describes the design and implementation of a low-profile sinuous slot antenna, intended for ultra-wideband (UWB) sensor networks, which can be produced on one conductive layer. The article explains the design and optimization of the sinuous slot antenna and its modifications, including its sinusoidal curve shape. Other modifications were aimed at optimizing the antenna feeding. Desirable properties of the designed and implemented antenna modifications were verified both by simulation and empirically. Experimental measurements of the antenna’s properties were carried out using a vector network analyzer in an anechoic chamber and also by a pulsed UWB radar in the frequency range from 0.1 to 6 GHz. The low-profile antennas were implemented on a Rogers RO3206 substrate. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Graphical abstract

15 pages, 3197 KiB

Open AccessFeature PaperArticle

Efficient Large Sparse Arrays Synthesis by Means of Smooth Re-Weighted L1 Minimization

by Daniele Pinchera, Marco Donald Migliore, Mario Lucido, Fulvio Schettino and Gaetano Panariello

Electronics 2019, 8(1), 83; https://doi.org/10.3390/electronics8010083 - 11 Jan 2019

Cited by 10 | Viewed by 4447

Abstract

In this paper, we present an efficient technique for the synthesis of very large sparse arrays, with arbitrary circularly-symmetrical upper bounds for the pattern specifications. The algorithm, which is based on iterative smooth re-weighted L1 minimizations, is very flexible and is capable of [...] Read more.

In this paper, we present an efficient technique for the synthesis of very large sparse arrays, with arbitrary circularly-symmetrical upper bounds for the pattern specifications. The algorithm, which is based on iterative smooth re-weighted L1 minimizations, is very flexible and is capable of achieving very good performances with respect to competitive algorithms. Furthermore, thanks to its efficiency, planar arrays of hundreds of wavelengths can be synthesized with limited computational effort. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Graphical abstract

19 pages, 456 KiB

Open AccessArticle

Efficient Cumulant-Based Methods for Joint Angle and Frequency Estimation Using Spatial-Temporal Smoothing

by Yuexian Wang, Ling Wang, Xin Yang, Jian Xie, Brian W.-H. Ng and Peng Zhang

Electronics 2019, 8(1), 82; https://doi.org/10.3390/electronics8010082 - 10 Jan 2019

Cited by 3 | Viewed by 2705

Abstract

Most non-Gaussian signals in wireless communication array systems contain temporal correlation under a high sampling rate, which can offer more accurate direction of arrival (DOA) and frequency estimates and a larger identifiability. However, in practice, the estimation performance may severely degrade in coloured [...] Read more.

Most non-Gaussian signals in wireless communication array systems contain temporal correlation under a high sampling rate, which can offer more accurate direction of arrival (DOA) and frequency estimates and a larger identifiability. However, in practice, the estimation performance may severely degrade in coloured noise environments. To tackle this issue, we propose real-valued joint angle and frequency estimation (JAFE) algorithms for non-Gaussian signals using fourth-order cumulants. By exploiting the temporal correlation embedded in signals, a series of augmented cumulant matrices is constructed. For independent signals, the DOA and frequency estimates can be obtained, respectively, by leveraging a dual rotational invariance property. For coherent signals, the dual rotational invariance is constructed to estimate the generalized steering vectors, which associates the coherent signals into different groups. Then, the coherent signals in each group can be resolved by performing the forward-backward spatial smoothing. The proposed schemes not only improve the estimation accuracy, but also resolve many more signals than sensors. Besides, it is computationally efficient since it performs the estimation by the polynomial rooting in the real number field. Simulation results demonstrate the superiorities of the proposed estimator to its state-of-the-art counterparts on identifiability, estimation accuracy and robustness, especially for coherent signals. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

14 pages, 7214 KiB

Open AccessArticle

Characteristic Mode Analysis and Design of Wide Band MIMO Antenna Consisting of Metamaterial Unit Cell

by Adamu Halilu Jabire, Hong-Xing Zheng, Anas Abdu and Zhiwei Song

Electronics 2019, 8(1), 68; https://doi.org/10.3390/electronics8010068 - 8 Jan 2019

Cited by 49 | Viewed by 6872

Abstract

This paper presents a full wave simulation and characteristic mode-based design of a multiple-input-multiple-output (MIMO) antenna at 5.8 GHz for wireless local area network applications. The driven analysis comprises two antennas that are placed orthogonal to each other. A metamaterial unit structure in [...] Read more.

This paper presents a full wave simulation and characteristic mode-based design of a multiple-input-multiple-output (MIMO) antenna at 5.8 GHz for wireless local area network applications. The driven analysis comprises two antennas that are placed orthogonal to each other. A metamaterial unit structure in the form of a rectangular loop resonator is placed around the antenna element to reduce the electromagnetic interference and to increase the isolation between the two monopoles. A characteristic mode technique is employed to find out the dominant mode of the proposed antenna without a feeding port. It was revealed that mode 1 was the dominant mode among the three modes used. The MIMO antenna is constructed and measured using a vector network analyzer. A good isolation of less than 25 dB was attained with a wide impedance bandwidth of 65.5%. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

9 pages, 4424 KiB

Open AccessArticle

Compact Antenna for 4G/5G Metal Frame Mobile Phone Applications Using a Tuning Line

by Daiwei Huang, Zhengwei Du and Yan Wang

Electronics 2018, 7(12), 439; https://doi.org/10.3390/electronics7120439 - 14 Dec 2018

Cited by 5 | Viewed by 5597

Abstract

A compact antenna with a 6 mm ground clearance for 4G and 5G metal frame mobile phones is proposed in this paper. The proposed antenna consists of a coupled line, a ground branch, a monopole branch, and a tuning line. The ground branch [...] Read more.

A compact antenna with a 6 mm ground clearance for 4G and 5G metal frame mobile phones is proposed in this paper. The proposed antenna consists of a coupled line, a ground branch, a monopole branch, and a tuning line. The ground branch and the coupled line are used to obtain the lower band (698–960 MHz), the monopole branch is used to improve the match at the lower band and obtain the higher band (1710–2690, 3400–3800 MHz), and the tuning line is used to improve the match at the higher band. The novelty of the proposed antenna is that more modes are excited and work together to obtain multiple working bands, by using the coupled line and the folded branches with the help of the tuning line, and then nine bands are obtained under the conditions of a 6 mm, only, ground clearance and a metal frame environment. A prototype has been fabricated and measured. The measured −6 dB impedance bandwidths are 345 MHz (0.685–1.03 GHz) and 2.16 GHz (1.67–3.83 GHz) at the lower and higher bands, respectively. The LTE700, GSM850, GSM900, DCS, PCS, UMTS, LTE2300, and LTE2500 bands for 2G, 3G, 4G, and the 3.5 GHz band that is possible for 5G are covered. The measured efficiencies and patterns are also presented. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

21 pages, 890 KiB

Open AccessArticle

SBL-Based Direction Finding Method with Imperfect Array

by Peng Chen, Zhimin Chen, Xuan Zhang and Linxi Liu

Electronics 2018, 7(12), 426; https://doi.org/10.3390/electronics7120426 - 11 Dec 2018

Cited by 9 | Viewed by 3121

Abstract

The imperfect array degrades the direction finding performance. In this paper, we investigate the direction finding problem in uniform linear array (ULA) system with unknown mutual coupling effect between antennas. By exploiting the target sparsity in the spatial domain, the sparse Bayesian learning [...] Read more.

The imperfect array degrades the direction finding performance. In this paper, we investigate the direction finding problem in uniform linear array (ULA) system with unknown mutual coupling effect between antennas. By exploiting the target sparsity in the spatial domain, the sparse Bayesian learning (SBL)-based model is proposed and converts the direction finding problem into a sparse reconstruction problem. In the sparse-based model, the off-grid errors are introduced by discretizing the direction area into grids. Therefore, an off-grid SBL model with mutual coupling vector is proposed to overcome both the mutual coupling and the off-grid effect. With the distribution assumptions of unknown parameters including the noise variance, the off-grid vector, the received signals and the mutual coupling vector, a novel direction finding method based on SBL with unknown mutual coupling effect named DFSMC is proposed, where an expectation-maximum (EM)-based step is adopted by deriving the estimation expressions for all the unknown parameters theoretically. Simulation results show that the proposed DFSMC method can outperform state-of-the-art direction finding methods significantly in the array system with unknown mutual coupling effect. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

Review

Jump to: Research, Other

11 pages, 2302 KiB

Open AccessFeature PaperReview

Coherently Driven and Superdirective Antennas

by Alex Krasnok

Electronics 2019, 8(8), 845; https://doi.org/10.3390/electronics8080845 - 29 Jul 2019

Cited by 5 | Viewed by 4542

Abstract

Antennas are crucial elements for wireless technologies, communications and power transfer across the entire spectrum of electromagnetic waves, including radio, microwaves, THz and optics. In this paper, we review our recent achievements in two promising areas: coherently enhanced wireless power transfer (WPT) and [...] Read more.

Antennas are crucial elements for wireless technologies, communications and power transfer across the entire spectrum of electromagnetic waves, including radio, microwaves, THz and optics. In this paper, we review our recent achievements in two promising areas: coherently enhanced wireless power transfer (WPT) and superdirective dielectric antennas. We show that the concept of coherently enhanced WPT allows improvement of the antenna receiving efficiency by coherent excitation of the outcoupling waveguide with a backward propagating guided mode with a specific amplitude and phase. Antennas with the superdirectivity effect can increase the WPT system’s performance in another way, through tailoring of radiation diagram via engineering antenna multipoles excitation and interference of their radiation. We demonstrate a way to achieve the superdirectivity effect via higher-order multipoles excitation in a subwavelength high-index spherical dielectric resonator supporting electric and magnetic Mie multipoles. Thus, both types of antenna discussed here possess a coherent nature and can be used in modern intelligent antenna systems. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures

Figure 1

15 pages, 1293 KiB

Open AccessReview

Planar Textile Off-Body Communication Antennas: A Survey

by Ruben Del-Rio-Ruiz, Juan-Manuel Lopez-Garde and Jon Legarda

Electronics 2019, 8(6), 714; https://doi.org/10.3390/electronics8060714 - 24 Jun 2019

Cited by 22 | Viewed by 5708

Abstract

Fully textile smart wearables will be the result of the complete integration and miniaturization of electronics and textile materials. Off-body communications are key for connecting smart wearables with external devices, even for wireless power transfer or energy harvesting. They need to fulfill specific [...] Read more.

Fully textile smart wearables will be the result of the complete integration and miniaturization of electronics and textile materials. Off-body communications are key for connecting smart wearables with external devices, even for wireless power transfer or energy harvesting. They need to fulfill specific electromagnetic (EM) (impedance bandwidth (BW), gain, efficiency, and front to back radiation (FTBR)) and mechanical (bending, crumpling, compression, washing and ironing) requirements so that the smart wearable device provides the required performance. Therefore, textile and flexible antennas require a proper trade-off between materials, antenna topologies, construction techniques, and EM and mechanical performances. This review shows the latest research works for textile and flexible planar, fully grounded antennas for off-body communications, providing a novel design guide that relates key antenna performance parameters versus topologies, feeding techniques, conductive and dielectric textile materials, as well as the behavior under diverse measurement conditions. Full article

(This article belongs to the Special Issue Intelligent Antennas)

► Show Figures