Polymers

Research

Jump to: Review

20 pages, 5913 KiB

Open AccessArticle

Viscoelastic Response of Elastohydrodynamically Lubricated Compliant Contacts below Glass-Transition Temperature

by Jiri Krupka, Krystof Dockal, Tomas Sedlacek, David Rebenda, Ivan Krupka and Martin Hartl

Polymers 2023, 15(11), 2528; https://doi.org/10.3390/polym15112528 - 30 May 2023

Cited by 1 | Viewed by 1494

Abstract

The widespread use of polymers in the high-performance engineering applications brings challenges in the field of liquid lubrication in order to separate the rubbing surfaces by the coherent fluid-film thickness relative to not only the inelastic material response of the polymers. The determination [...] Read more.

The widespread use of polymers in the high-performance engineering applications brings challenges in the field of liquid lubrication in order to separate the rubbing surfaces by the coherent fluid-film thickness relative to not only the inelastic material response of the polymers. The determination of the mechanical properties by the nanoindentation and the dynamic mechanical analysis represents the key methodology to identify the viscoelastic behavior with respect to the intense frequency and temperature dependance exhibited by polymers. The fluid-film thickness was examined by the optical chromatic interferometry on the rotational tribometer in the ball-on-disc configuration. Based on the experiments performed, first, the complex modulus and the damping factor for the PMMA polymer describing the frequency and temperature dependence were obtained. Afterwards, the central as well as minimum fluid-film thickness were investigated. The results revealed the operation of the compliant circular contact in the transition region very close to the boundary between the Piezoviscous-elastic and Isoviscous-elastic modes of the elastohydrodynamic lubrication regime, and a significant deviation of the fluid-film thickness from the prediction models for both modes in dependence on the inlet temperature. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Graphical abstract

16 pages, 4642 KiB

Open AccessArticle

Characterizing the Impact of Chitosan on the Nucleation and Crystal Growth of Ritonavir from Supersaturated Solutions

by Arif Budiman, Kalina Kalina, Levina Aristawidya, Adnan Aly Al Shofwan, Agus Rusdin and Diah Lia Aulifa

Polymers 2023, 15(5), 1282; https://doi.org/10.3390/polym15051282 - 3 Mar 2023

Cited by 5 | Viewed by 2094

Abstract

The addition of polymeric materials is often used to delay nucleation or crystal growth and maintain the high supersaturation of amorphous drugs. Therefore, this study aimed to investigate the impact of chitosan on the supersaturation behavior of drugs with a low recrystallization tendency [...] Read more.

The addition of polymeric materials is often used to delay nucleation or crystal growth and maintain the high supersaturation of amorphous drugs. Therefore, this study aimed to investigate the impact of chitosan on the supersaturation behavior of drugs with a low recrystallization tendency and elucidate the mechanism of its crystallization inhibition in an aqueous solution. It was carried out using ritonavir (RTV) as a model of poorly water-soluble drugs categorized as class III of Taylor’s classification, while chitosan was used as a polymer, and hypromellose (HPMC) was used for comparison. The inhibition of the nucleation and crystal growth of RTV by chitosan was examined by measuring the induction time. The interactions of RTV with chitosan and HPMC were evaluated by NMR measurements, FT-IR, and an in silico analysis. The results showed that the solubilities of amorphous RTV with and without HPMC were quite similar, while the amorphous solubility was significantly increased by the chitosan addition due to the solubilization effect. In the absence of the polymer, RTV started to precipitate after 30 min, indicating that it is a slow crystallizer. Chitosan and HPMC effectively inhibited the nucleation of RTV, as reflected by a 48–64-fold enhancement in the induction time. Furthermore, NMR, FT-IR, and in silico analysis demonstrated that the hydrogen bond interaction between the amine group of RTV and a proton of chitosan, as well as the carbonyl group of RTV and a proton of HPMC, was observed. This indicated that the hydrogen bond interaction between RTV and chitosan as well as HPMC can contribute to the crystallization inhibition and maintenance of RTV in a supersaturated state. Therefore, the addition of chitosan can delay nucleation, which is crucial for stabilizing supersaturated drug solutions, specifically for a drug with a low crystallization tendency. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Figure 1

18 pages, 3205 KiB

Open AccessArticle

Bio-Based Polyurethane Foams from Kraft Lignin with Improved Fire Resistance

by Fernanda R. Vieira, Nuno V. Gama, Dmitry V. Evtuguin, Carlos O. Amorim, Vitor S. Amaral, Paula C. O. R. Pinto and Ana Barros-Timmons

Polymers 2023, 15(5), 1074; https://doi.org/10.3390/polym15051074 - 21 Feb 2023

Cited by 9 | Viewed by 3207

Abstract

Rigid polyurethane foams (RPUFs) were synthesized using exclusively lignin-based polyol (LBP) obtained via the oxyalkylation of kraft lignin with propylene carbonate (PC). Using the design of experiments methodology combined with statistical analysis, the formulations were optimized to obtain a bio-based RPUF with low [...] Read more.

Rigid polyurethane foams (RPUFs) were synthesized using exclusively lignin-based polyol (LBP) obtained via the oxyalkylation of kraft lignin with propylene carbonate (PC). Using the design of experiments methodology combined with statistical analysis, the formulations were optimized to obtain a bio-based RPUF with low thermal conductivity and low apparent density to be used as a lightweight insulating material. The thermo-mechanical properties of the ensuing foams were compared with those of a commercial RPUF and a RPUF (RPUF-conv) produced using a conventional polyol. The bio-based RPUF obtained using the optimized formulation exhibited low thermal conductivity (0.0289 W/m·K), low density (33.2 kg/m³), and reasonable cell morphology. Although the bio-based RPUF has slightly lower thermo-oxidative stability and mechanical properties than RPUF-conv, it is still suitable for thermal insulation applications. In addition, the fire resistance of this bio-based foam has been improved, with its average heat release rate (HRR) reduced by 18.5% and its burn time extended by 25% compared to RPUF-conv. Overall, this bio-based RPUF has shown potential to replace petroleum-based RPUF as an insulating material. This is the first report regarding the use of 100% unpurified LBP obtained via the oxyalkylation of LignoBoost kraft lignin in the production of RPUFs. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Figure 1

16 pages, 7052 KiB

Open AccessArticle

Boosting the Antibacterial Performance of Natural Rubber Latex Foam by Introducing Silver-Doped Zinc Oxide

by Abdulhakim Masa, Nureeyah Jehsoh, Sawitree Dueramae and Nabil Hayeemasae

Polymers 2023, 15(4), 1040; https://doi.org/10.3390/polym15041040 - 19 Feb 2023

Cited by 8 | Viewed by 2469

Abstract

Natural rubber (NR) latex foam is one of the rubber products that are increasingly in demand in the market. This is simply because of its lightweight, good thermal insulation, and resilience. The applications of NR latex foam are mostly for pillows and mattresses. [...] Read more.

Natural rubber (NR) latex foam is one of the rubber products that are increasingly in demand in the market. This is simply because of its lightweight, good thermal insulation, and resilience. The applications of NR latex foam are mostly for pillows and mattresses. This has resulted in these products requiring antibacterial performance which is very important for the safety of the end-users. In this study, the antibacterial NR latex foam was prepared by incorporating the silver-doped zinc oxide (Ag-doped ZnO) into the NR latex foam. Ag-doped ZnO was prepared by microwave-assisted method and then characterized through morphological characteristics and X-ray diffraction (XRD). The content of Ag doped onto ZnO was designed by varying the AgNO₃ content at 15 wt%, 50 wt%, and 100 wt% of ZnO. The results confirmed that the Ag was successfully doped onto ZnO. The silver particles were found to be in the 40–50 nm range, where the size of ZnO ranges between 300 and 400 nm, and the Ag attached to the ZnO particles. The XRD patterns of Ag-doped ZnO correspond to planes of hexagonal wurtzite ZnO structure and cubic metallic Ag. This Ag-doped ZnO was further added to NR latex foam. It was observed that Ag-doped ZnO did not affect the physical properties of the NR latex foam. However, it is clear that both the inhibition zone and percent reduction of bacteria (e.g., E. coli and S. aureus) were enhanced by the addition of Ag-doped ZnO. It showed a decrease in the amount of cell growth over contact time. The content of 100 wt% AgNO₃ could reduce E. coli and S. aureus up to 64.72% and 58.90%, respectively, when samples were maintained for 24 h. This study provides a scientific understanding of how Ag-doped ZnO could facilitate the development of eventual rubber foam products based on the respective results. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Graphical abstract

24 pages, 5601 KiB

Open AccessArticle

Tailored Supersaturable Immediate Release Behaviors of Hypotensive Supersaturating Drug-Delivery Systems Combined with Hot-Melt Extrusion Technique and Self-Micellizing Polymer

by Huan Yu, Yinghui Ma, Yanfei Zhang, Huifeng Zhang, Lili Zuo, Chengyi Hao, Weilun Yu, Xiaoying Lin, Yong Zhang, Xianrong Qi and Nianqiu Shi

Polymers 2022, 14(22), 4800; https://doi.org/10.3390/polym14224800 - 8 Nov 2022

Cited by 2 | Viewed by 1869

Abstract

The short-term immediate release of supersaturated drug-delivery systems (SDDSs) presents an interesting process that can be tailored to multi-stage release events including initial release after dosing and dissolution, evolved release over longer dissolution periods for biological absorption, and terminal release following the end [...] Read more.

The short-term immediate release of supersaturated drug-delivery systems (SDDSs) presents an interesting process that can be tailored to multi-stage release events including initial release after dosing and dissolution, evolved release over longer dissolution periods for biological absorption, and terminal release following the end of immediate release. However, although comprehensive analysis of these critical release behaviors is often ignored yet essential for understanding the supersaturable immediate-release events for supersaturable solid formations when employing new techniques or polymers matched to a particular API. Hot-melt extrusion (HME) has become a popular continuous thermodynamic disordering technique for amorphization. The self-micellizing polymer Soluplus^® is reported to be a potential amorphous and amphiphilic graft copolymer frequently used in many nano/micro supersaturable formulations. Our current work aims to develop hypotensive supersaturating solid dispersion systems (faSDDS_HME) containing the BCS II drug, felodipine, when coordinately employing the HME technique and self-micellizing Soluplus^®, and to characterize their amorphization as well as immediate release. Other discontinuous techniques were used to prepare control groups (faSDDS_SE and faSDDS_QC). Tailored initial/evolved/terminal three-stage supersaturable immediate-release behaviors were identified and possible mechanisms controlling the release were explored. HME produced the highest initial release in related faSDDS_HME. During the evolved-release period, highly extended “spring-parachute” process was found in HME-induced amorphization owing to its superior supersaturation duration. Due to the enhanced crystallization inhibition effect, faSDDS_HME displayed the strongest terminal release as measured by solubility. For release mechanisms associated with HME, molecular interaction is not the likely dominant mechanism responsible for the improved properties induced by faSDDS_HME. For release mechanisms involved with the polymer Soluplus^® itself, they were found to inhibit drug recrystallization, spontaneously solubilize the drug and lead to improved molecular interactions in all SDDS systems, which were the factors responsible for the improved release. These mechanisms play an important role for the generation of an extended multi-stage immediate release produced via HME or self-micellizing polymer. This study provides a deeper understanding on amorphization and superior multi-stage supersaturable immediate-release behaviors for a particular hypotensive supersaturated delivery system combined with an HME-based continuous manufacturing technique and self-micellizing polymer strategy. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Figure 1

19 pages, 7034 KiB

Open AccessArticle

Impact of Crystallization on the Development of Statistical Self-Bonding Strength at Initially Amorphous Polymer–Polymer Interfaces

by Yuri M. Boiko

Polymers 2022, 14(21), 4519; https://doi.org/10.3390/polym14214519 - 25 Oct 2022

Cited by 5 | Viewed by 1488

Abstract

To investigate the mechanisms of the adhesion (self-bonding) strength (σ) development during the early stages of self-healing of polymer–polymer interfaces and fracture thereof, it is useful to operate not only with the average σ value but with the σ distribution as [...] Read more.

To investigate the mechanisms of the adhesion (self-bonding) strength (σ) development during the early stages of self-healing of polymer–polymer interfaces and fracture thereof, it is useful to operate not only with the average σ value but with the σ distribution as well. The latter has been shown to obey Weibull’s statistics for such interfaces. However, whether it can also follow the most widely used normal (Gaussian) distribution is currently unclear. Moreover, a more complicated self-healing case, when the σ development at an initially amorphous interface is accompanied by its crystallization, has not been investigated yet in this respect. In order to address these two important issues, 10 pairs of amorphous poly(ethylene terephthalate) (PET) samples were kept in contact for various periods of time from 5 min to 15 h at a temperature (T) of 94 °C (preserving the amorphous state) or T = 150 °C (giving rise to cold crystallization), or both Ts. Thereafter, the as-formed amorphous and semi-crystalline PET–PET auto-adhesive joints were shear fractured in tension at ambient temperature. For the first time, the statistical distributions of a number of the measured σ data sets were analyzed and discussed using both Weibull’s and the Gaussian model, including several normality tests. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Figure 1

17 pages, 4528 KiB

Open AccessArticle

The Use of New Waste-Based Plasticizer Made from Modified Used Palm Oil for Non-Glutinous Thermoplastic Starch Foam

by Jatupol Junthip, Natchapat Chaipalee, Yada Sangsorn, Chanannat Maspornpat, Juthamas Jitcharoen, Sittichai Limrungruengrat, Thana Chotchuangchutchaval, Ekkachai Martwong and Nathapong Sukhawipat

Polymers 2022, 14(19), 3997; https://doi.org/10.3390/polym14193997 - 24 Sep 2022

Cited by 4 | Viewed by 3074

Abstract

A novel waste-based plasticizer derived from modified used palm oil (mUPO) was successfully developed and has been used as a new plasticizer to non-glutinous thermoplastic starch foam to improve their properties. The molecular weight and hydroxyl number of the mUPO was 3150 g/mol [...] Read more.

A novel waste-based plasticizer derived from modified used palm oil (mUPO) was successfully developed and has been used as a new plasticizer to non-glutinous thermoplastic starch foam to improve their properties. The molecular weight and hydroxyl number of the mUPO was 3150 g/mol and 192.19 mgOH/g, respectively. The effects of mUPO content ranging from 0 to 9 phr were investigated. The results revealed that the optimal mUPO content as an additive was 6 wt%. The addition of mUPO had a direct effect on the mechanical properties and thermal properties. The impact strength increased from 1.30 to 4.55 J/m, while the glass transition temperature (T_g) decreased from 70.83 to 66.50 °C by increasing mUPO from 0 phr to 6 phr in the thermoplastic starch foam. The mUPO, on the other hand, has also the potential to reduce shrinkage from 33.91 to 21.77% and moisture absorption from 5.93 to 1.73% by increasing the content from 0 phr to 6 phr in starch foam. Furthermore, the mUPO helps the forming of the foam structure as measured by SEM, and the mUPO utilization of waste-based material could be a promising green alternative plasticizer for starch components, especially starch foam applications. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Graphical abstract

Review

Jump to: Research

20 pages, 3739 KiB

Open AccessReview

Recent Studies on Thermally Conductive 3D Aerogels/Foams with the Segregated Nanofiller Framework

by Mohammad Owais, Aleksei Shiverskii, Amit Kumar Pal, Biltu Mahato and Sergey G. Abaimov

Polymers 2022, 14(22), 4796; https://doi.org/10.3390/polym14224796 - 8 Nov 2022

Cited by 7 | Viewed by 3090

Abstract

As technology advances toward ongoing circuit miniaturization and device size reduction followed by improved power density, heat dissipation is becoming a key challenge for electronic equipment. Heat accumulation can be prevented if the heat from electrical equipment is efficiently exported, ensuring a device’s [...] Read more.

As technology advances toward ongoing circuit miniaturization and device size reduction followed by improved power density, heat dissipation is becoming a key challenge for electronic equipment. Heat accumulation can be prevented if the heat from electrical equipment is efficiently exported, ensuring a device’s lifespan and dependability and preventing otherwise possible mishaps or even explosions. Hence, thermal management applications, which include altering the role of aerogels from thermally insulative to thermally conductive, have recently been a hot topic for 3D-aerogel-based thermal interface materials. To completely comprehend three-dimensional (3D) networks, we categorized and comparatively analyzed aerogels based on carbon nanomaterials, namely fibers, nanotubes, graphene, and graphene oxide, which have capabilities that may be fused with boron nitride and impregnated for better thermal performance and mechanical stability by polymers, including epoxy, cellulose, and polydimethylsiloxane (PDMS). An alternative route is presented in the comparative analysis by carbonized cellulose. As a result, the development of structurally robust and stiff thermally conductive aerogels for electronic packaging has been predicted to increase polymer thermal management capabilities. The latest trends include the self-organization of an anisotropic structure on several hierarchical levels within a 3D framework. In this study, we highlight and analyze the recent advances in 3D-structured thermally conductive aerogels, their potential impact on the next generation of electronic components based on advanced nanocomposites, and their future prospects. Full article

(This article belongs to the Special Issue Advanced Properties in Amorphous Polymers)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Advanced Properties in Amorphous Polymers

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (8 papers)

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI