Submit to Buildings Review for Buildings Propose a Special Issue

Journal Menu

Journal Browser

Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings

Print Special Issue Flyer
Special Issue Editors
Special Issue Information
Keywords
Benefits of Publishing in a Special Issue
Published Papers

A special issue of Buildings (ISSN 2075-5309). This special issue belongs to the section "Building Energy, Physics, Environment, and Systems".

Deadline for manuscript submissions: closed (31 May 2021) | Viewed by 62028

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings book cover image

Share This Special Issue

Special Issue Editors

Dr. Alessandro Cannavale

E-Mail Website
Guest Editor

1. Department of Architecture, Construction and Design, Polytechnic University of Bari, Via Orabona 4, 70125 Bari, Italy
2. National Research Council, Institute of Nanotechnology (CNR-NANOTEC), Via Monteroni, 73100 Lecce, Italy
Interests: building integration of innovative technologies; energy saving; building energy
Special Issues, Collections and Topics in MDPI journals

Prof. Dr. Francesco Martellotta

E-Mail Website1 Website2
Guest Editor

Dipartimento di Architettura Costruzione e Design, Politecnico di Bari, Via Orabona n.4, 70125 Bari, Italy
Interests: hermal comfort; indoor environment quality; architectural acoustics; building simulation; energy saving and renewable energies
Special Issues, Collections and Topics in MDPI journals

Prof. Dr. Francesco Fiorito

E-Mail Website
Guest Editor

Department of Civil, Environmental, Land, Building Engineering and Chemistry (DICATECh), Polytechnic University of Bari, via E. Orabona 4, 70125 Bari, Italy
Interests: facade engineering and design; building construction technologies; energy savings in buildings; local and global climate change and buildings
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

This Special Issue aims at reporting current investigations on emerging materials and devices taking up the challenge of pursuing a significant improvement in the energy performance of buildings and indoor comfort. What is the contribution of innovative technologies in the epochal transition to low environmental impact buildings? This is the question to be answered with this Special Issue of the Buildings journal, in order to offer a wide and heterogeneous amount of data to readers and results of high scientific impact concerning the application of innovative technologies in construction.

The 2015 Paris Agreement on climate change following the COP 21 Conference on Climate Change, organized by United Nations, required the States to reduce carbon emissions in the building stock. In the European Union, almost 50% of final energy consumption is used for heating and cooling; out of this huge amount, 80% is used in buildings. It makes sense, then, that the Union’s goals are inherently linked to the real effort to renovate the building stock. To do this, in the EU and worldwide, the priority is to enhance energy efficiency, by deploying low-cost renewable energies and innovative technologies, especially deriving from recent achievements in the field of nanomaterials research, with special reference to building integration of novel technologies, spanning from chromogenics to semitransparent photovoltaics, superinsulating materials, and phase change materials. Articles may therefore deal with every construction or plant component of the building organism, taking advantage of novel technologies to improve their performance, from the envelope to structures, HVAC, and other technical systems, as well as indoor climate analyses in buildings and indoor environmental quality (IEQ), as well as visual comfort indoor. Studies concerning nearly zero energy buildings (NZEB) are especially welcome in this issue.

Dr. Alessandro Cannavale
Prof. Francesco Martellotta
Dr. Francesco Fiorito
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Buildings is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

Energy performance
Nanomaterials
Chromogenics
Semitransparent photovoltaics
Building integration
Phase-change materials
Aerogel
HVAC systems
Indoor environment quality
Nearly zero energy buildings
Visual comfort

Benefits of Publishing in a Special Issue

Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (11 papers)

Download All Papers

Order results

Result details

Show export options Show export options

Select all

Export citation of selected articles as:

Editorial

Jump to: Research, Review

3 pages, 190 KiB

Open AccessEditorial

Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings

by Alessandro Cannavale, Francesco Martellotta and Francesco Fiorito

Buildings 2021, 11(7), 303; https://doi.org/10.3390/buildings11070303 - 11 Jul 2021

Cited by 4 | Viewed by 2236

Abstract

Here, we overview the Buildings journal Special Issue dedicated to the following topic: “Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings” (https://www [...] Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

Research

Jump to: Editorial, Review

18 pages, 3320 KiB

Open AccessArticle

Analysis of Incorporating a Phase Change Material in a Roof for the Thermal Management of School Buildings in Hot-Humid Climates

by Ruey-Lung Hwang, Bi-Lian Chen and Wei-An Chen

Buildings 2021, 11(6), 248; https://doi.org/10.3390/buildings11060248 - 9 Jun 2021

Cited by 11 | Viewed by 3304

Abstract

Strategies to reduce energy consumption are presently experiencing vigorous development. Phase change materials (PCMs) are novel materials that can reduce indoor temperatures via the change in material phase. Regarding the situation in Taiwan, there is no practical utilization of PCMs in school buildings at present, especially in combination with rooftops. In this paper, we discuss the feasibility and utilization potential of installing PCMs in the rooftops of school buildings. School buildings located in northern and southern Taiwan (Taipei and Kaohsiung) were selected to analyze the energy-saving potential and optimization of indoor thermal comfort by installing PCMs with different properties in rooftops over two time periods, including the air conditioning (AC) and natural ventilation (NV) seasons. Based on the simulation results, the feasible patterns of PCM simultaneity are found to be appropriate for improved indoor comfort and energy saving during the different seasons. Specifically, the efficient phase change temperature (PCT) for different PCM thicknesses is clarified to be 29 °C. The economic thickness of PCM was clarified to be 20 mm for Taipei and Kaohsiung. Through the recommendations proposed in this study, it is expected that the PCMs may be efficiently implemented in school buildings to realize the goal of energy conservation and improve thermal comfort. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

23 pages, 5690 KiB

Open AccessArticle

Economic Evaluation of the Indoor Environmental Quality of Buildings: The Noise Pollution Effects on Housing Prices in the City of Bari (Italy)

by Pierluigi Morano, Francesco Tajani, Felicia Di Liddo and Michele Darò

Buildings 2021, 11(5), 213; https://doi.org/10.3390/buildings11050213 - 19 May 2021

Cited by 18 | Viewed by 4647

Abstract

Among environmental factors, noise represents one of the most relevant determinants on human health and on the urban quality level and, consequently, on real estate values. Thus, the noise pollution issue plays a significant role in public urban policies aimed at increasing the acoustic comfort level and creating more sustainable and comfortable cities. The real estate market is highly sensitive to noise factor and the residential prices can be strongly influenced by a high acoustic pollution rate. The present research aims to analyze the functional relationships between noise pollution and selling prices in four municipal areas of the city of Bari (Southern Italy). For each area, a study sample constituted by two hundred residential properties sold in 2017–2019 was detected for the identification of the main influential factors on prices and the investigation of the contribution of noise on them. The implementation of an econometric technique was used to obtain four different models (one for each municipal area of the city of Bari) able to explain the specific impact of noise pollution level on selling prices. From the comparison of the results obtained for each area, the outputs confirm the expected phenomena in terms of a decrease of noise component influence on residential prices from the central area to the peripheral. For the suburban area of the city of Bari, the model obtained does not include the noise pollution factor, showing a lower (scarce) importance of the environmental factor among the buyer and seller bargaining phases. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

31 pages, 8662 KiB

Open AccessArticle

Deep Learning Optimal Control for a Complex Hybrid Energy Storage System

by Gabriel Zsembinszki, Cèsar Fernández, David Vérez and Luisa F. Cabeza

Buildings 2021, 11(5), 194; https://doi.org/10.3390/buildings11050194 - 3 May 2021

Cited by 24 | Viewed by 5041

Abstract

Deep Reinforcement Learning (DRL) proved to be successful for solving complex control problems and has become a hot topic in the field of energy systems control, but for the particular case of thermal energy storage (TES) systems, only a few studies have been reported, all of them with a complexity degree of the TES system far below the one of this study. In this paper, we step forward through a DRL architecture able to deal with the complexity of an innovative hybrid energy storage system, devising appropriate high-level control operations (or policies) over its subsystems that result optimal from an energy or monetary point of view. The results show that a DRL policy in the system control can reduce the system operating costs by more than 50%, as compared to a rule-based control (RBC) policy, for cooling supply to a reference residential building in Mediterranean climate during a period of 18 days. Moreover, a robustness analysis was carried out, which showed that, even for large errors in the parameters of the system simulation models corresponding to an error multiplying factors up to 2, the average cost obtained with the original model deviates from the optimum value by less than 3%, demonstrating the robustness of the solution over a wide range of model errors. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

27 pages, 10575 KiB

Open AccessArticle

Energy Performances Assessment of Extruded and 3D Printed Polymers Integrated into Building Envelopes for a South Italian Case Study

by Giovanni Ciampi, Yorgos Spanodimitriou, Michelangelo Scorpio, Antonio Rosato and Sergio Sibilio

Buildings 2021, 11(4), 141; https://doi.org/10.3390/buildings11040141 - 1 Apr 2021

Cited by 15 | Viewed by 3104

Abstract

Plastic materials are increasingly becoming used in the building envelope, despite a lack of investigation on their effects. In this work, an extruded Acrylonitrile-Butadiene-Styrene panel has been tested as a second-skin layer in a ventilated facade system using a full-scale facility. The experimental results show that it is possible to achieve performances very similar to conventional materials. A numerical model has then been developed and used to investigate the performances of plastic and composite polymer panels as second-skin layers. The experimental data has been used to verify the behavior of the numerical model, from a thermal point of view, showing good reliability, with a root mean square error lower than 0.40 °C. This model has then been applied in different refurbishment cases upon varying: the polymer and the manufacturing technology (extruded or 3D-printed panels). Eight refurbishment case studies have been carried out on a typical office building located in Napoli (Italy), by means of a dynamic simulation software. The simulation results show that the proposed actions allow the reduction of the thermal and cooling energy demand (up to 6.9% and 3.1%, respectively), as well as the non-renewable primary energy consumption (up to 2.6%), in comparison to the reference case study. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

15 pages, 4456 KiB

Open AccessArticle

Influence of Ausforming Treatment on Super Elasticity of Cu-Zn-Al Shape Memory Alloy for Seismic Energy Dissipaters

by Danko Ćorić and Irena Žmak

Buildings 2021, 11(1), 22; https://doi.org/10.3390/buildings11010022 - 6 Jan 2021

Cited by 7 | Viewed by 3264

Abstract

In order to develop the application of the more cost-effective copper-based shape memory alloys (SMAs), rather than nickel–titanium as earthquake energy dissipaters, the influence of ausforming-induced plastic deformation on phase transformations, microstructure, super elasticity and mechanical properties of the shape memory alloy Cu-26Zn-4Al was examined. These specific SMA properties were targeted by applying appropriate parameters of the thermomechanical (the so-called ausforming) process: beta-phase homogenization at 800 °C for 20 min, one-step hot rolling at 800 °C and water quenching. The results showed significant microstructural changes, increased mechanical resistance and change in the phase transformation behavior. The SMA treated by ausforming retained the reversible austenitic–martensitic transformation ability, with the appearance of the super-elastic effect up to 6% of strain recovery. Although some strengthening occurred after hot rolling (an increase in true yield strength of 125 MPa was detected), all phase transformation temperatures were decreased. The smallest decrease was detected for the austenite finish temperature (32.8 °C) and the largest for the martensite finish temperature (42.0 °C), allowing both the expansion and the lowering of the temperature range of super elasticity, which is favorable for construction applications. It is concluded that it is possible to achieve an optimal combination of adequate strength and improved transformation behavior of Cu-Zn-Al alloy by applying the ausforming treatment. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

19 pages, 5283 KiB

Open AccessEditor’s ChoiceArticle

Definition of Optimal Ventilation Rates for Balancing Comfort and Energy Use in Indoor Spaces Using CO₂ Concentration Data

by Alessandro Franco and Eva Schito

Buildings 2020, 10(8), 135; https://doi.org/10.3390/buildings10080135 - 24 Jul 2020

Cited by 39 | Viewed by 6558

Abstract

Air ventilation rate plays a relevant role in maintaining adequate indoor air quality (IAQ) conditions in public buildings. In general, high ventilation rates ensure good indoor air quality but entail relevant energy consumption. Considering the necessity of balancing IAQ and energy consumption, a correlation between the number of occupants obtained from analysis of CO₂ concentration variation is presented as a general element for controlling the operation of heating ventilation and air cooling (HVAC) systems. The specific CO₂ exhalation rate is estimated using experimental data in some real conditions in university classrooms. A method for the definition of optimal values of air exchange rate is defined, highlighting that the obtained values are much lower than those defined in current technical standards with possibilities of relevant reduction of the total energy consumption. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

31 pages, 7440 KiB

Open AccessArticle

A Framework to Achieve Multifunctionality in Biomimetic Adaptive Building Skins

by Aysu Kuru, Philip Oldfield, Stephen Bonser and Francesco Fiorito

Buildings 2020, 10(7), 114; https://doi.org/10.3390/buildings10070114 - 27 Jun 2020

Cited by 23 | Viewed by 7400

Abstract

Building skins should host multiple functions for increased performance. Addressing this, their design can benefit by learning from nature to achieve multifunctionality, where multifunctional strategies have evolved over years. However, existing frameworks to develop biomimetic adaptive building skins (Bio-ABS) have limited capabilities transferring multifunctionality from nature into designs. This study shows that through investigating the principles of hierarchy and heterogeneity, multifunctionality in nature can be transferred into biomimetic strategies. We aim at mapping the existing knowledge in biological adaptations from the perspective of multifunctionality and developing a framework achieving multifunctionality in Bio-ABS. The framework is demonstrated through the case study of Echinocactus grusonii implemented as a Bio-ABS on a digital base-case building. The methods include the Bio-ABS case study demonstrating the framework and simulating the performance of the case study and base-case building to comparatively analyze the results. The outcomes are a framework to develop multifunctional Bio-ABS and simulation results on the performance improvement Bio-ABS offer. The performance comparison between the Bio-ABS and base-case building show that there is a decrease in the discomfort hours by a maximum of 23.18%. In conclusion, translating heterogeneity and hierarchy principles in nature into engineered designs is a key aspect to achieve multifunctionality in Bio-ABS offering improved strategies in performance over conventional buildings. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

16 pages, 2230 KiB

Open AccessArticle

Non-commercial Air Purifier—The Effectiveness and Safety

by Anna Mainka, Walter Mucha, Józef S. Pastuszka, Ewa Brągoszewska and Agnieszka Janoszek

Buildings 2020, 10(6), 104; https://doi.org/10.3390/buildings10060104 - 31 May 2020

Cited by 7 | Viewed by 6990

Abstract

(1) Background: On the Internet, we can find the guidelines for homemade air purifiers. One of the solutions includes the use of a low-cost ozone generator to decrease the level of odors and biological contaminants. However, the authors do not notify about hazardous effects of ozone generation on human health; (2) Methods: We elaborated our test results on the bacterial and fungal aerosol reduction by the use of two technical solutions of homemade air purifiers. First, including a mesh filter and ozone generator, second including an ozone generator, mesh filter, and carbon filter. (3) Conclusions: After 20 min of ozone generation, the concentration of bacteria decreased by 78% and 48% without and with a carbon filter, while fungi concentration was reduced in the lower range 63% and 40%, respectively. Based on our test results, we proposed a precise periodical operation of homemade air purifier to maintain the permissible level of ozone for the occupants. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

15 pages, 4494 KiB

Open AccessArticle

Modeling of an Aerogel-Based “Thermal Break” for Super-Insulated Window Frames

by Alessandro Cannavale, Francesco Martellotta, Umberto Berardi, Chiara Rubino, Stefania Liuzzi, Vincenzo De Carlo and Ubaldo Ayr

Buildings 2020, 10(3), 60; https://doi.org/10.3390/buildings10030060 - 18 Mar 2020

Cited by 9 | Viewed by 5679

Abstract

Research activities in the field of innovative fixtures are continuously aiming at increasing their thermal and optical performances to offer optimal exploitation of daylight and solar gains, providing effective climate screen, according to increasing standards for indoor comfort and energy saving. Within this work, we designed an innovative aerogel-based “thermal break” for window frames, so as to consistently reduce the frame conductance. Then, we compared the performance of this new frame both with currently used and obsolete frames, present in most of the existing building stock. Energy savings for heating and cooling were assessed for different locations and confirmed the potential role played by super-insulating materials in fixtures for extremely rigid climates. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Figure 1

Review

Jump to: Editorial, Research

37 pages, 7092 KiB

Open AccessReview

Perovskite Solar Cells for BIPV Application: A Review

by Anurag Roy, Aritra Ghosh, Shubhranshu Bhandari, Senthilarasu Sundaram and Tapas K. Mallick

Buildings 2020, 10(7), 129; https://doi.org/10.3390/buildings10070129 - 13 Jul 2020

Cited by 70 | Viewed by 12067

Abstract

The rapid efficiency enhancement of perovskite solar cells (PSCs) make it a promising photovoltaic (PV) research, which has now drawn attention from industries and government organizations to invest for further development of PSC technology. PSC technology continuously develops into new and improved results. However, stability, toxicity, cost, material production and fabrication become the significant factors, which limits the expansion of PSCs. PSCs integration into a building in the form of building-integrated photovoltaic (BIPV) is one of the most holistic approaches to exploit it as a next-generation PV technology. Integration of high efficiency and semi-transparent PSC in BIPV is still not a well-established area. The purpose of this review is to get an overview of the relative scope of PSCs integration in the BIPV sector. This review demonstrates the benevolence of PSCs by stimulating energy conversion and its perspective and gradual evolution in terms of photovoltaic applications to address the challenge of increasing energy demand and their environmental impacts for BIPV adaptation. Understanding the critical impact regarding the materials and devices established portfolio for PSC integration BIPV are also discussed. In addition to highlighting the apparent advantages of using PSCs in terms of their demand, perspective and the limitations, challenges, new strategies of modification and relative scopes are also addressed in this review. Full article

(This article belongs to the Special Issue Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings)

► Show Figures

Journal Menu

Journal Browser

Novel Technologies to Enhance Energy Performance and Indoor Environmental Quality of Buildings

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Benefits of Publishing in a Special Issue

Published Papers (11 papers)

Editorial

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI