Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
5.1
3.3
Journals
JMMP
Special Issues
Advances in Metal Additive Manufacturing/3D Printing
share announcement

Advances in Metal Additive Manufacturing/3D Printing

A special issue of Journal of Manufacturing and Materials Processing (ISSN 2504-4494).

Deadline for manuscript submissions: closed (30 June 2023) | Viewed by 35575

Special Issue Editors

Dr. Mohsen K. Keshavarz

E-Mail Website
Guest Editor
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Interests: additive manufacturing of metals and ceramics; materials characterization; powder metallurgy; alloy development; materials for renewable and sustainable energy
Dr. Esmaeil Sadeghi

E-Mail Website
Guest Editor
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
Interests: additive manufacturing; fatigue and fracture; surface engineering; alloy development; superalloys
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Additive manufacturing (AM) has received considerable attention in the last two decades in both industry and academia, owing to its unique advantages over conventional manufacturing processes in terms of prototyping, design complexity, and near-net-shape production. The AM technology has been adopted in a wide range of engineering fields, including but not limited to the automotive, aerospace, medical, and biomedical industries. Despite a promising perspective for AM technology in terms of sustainability and robustness, there are still a few barriers impeding the technology’s adoption in the industry.

The purpose of this Special Issue is to provide a forum for researchers from academic and industrial researchers to discuss recent advances and future directions in the field of metal AM. For this Special Issue on “Advances in Metal Additive Manufacturing/3D Printing”, we invite submissions that describe advances in metal AM technologies and contribute to the scientific understanding of these technologies and methods through theoretical and/or experimental aspects of one or more of the following example topic areas:

  • Novel metal additive manufacturing processes and applications;
  • Advancements in developing new alloys for metal AM;
  • Progresses in materials characterization and modeling for metal AM;
  • 3D printing of large-scale components for industrial applications;
  • Innovative methods and applications for post-processing;
  • Machine learning, data science, and artificial intelligence for metal AM.

Dr. Mohsen K. Keshavarz
Dr. Esmaeil Sadeghi
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Journal of Manufacturing and Materials Processing is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 1800 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • additive manufacturing
  • 3D printing
  • modelling and simulation
  • technology advancements
  • advanced materials characterization
  • machine learning
  • sustainability

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (12 papers)

Download All Papers
Order results
Result details
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:

Research

Jump to: Review

13 pages, 7170 KiB  
Article
Temperature Evaluation of Cladding Beads and the Surrounding Area during the Laser Metal Deposition Process
by Yorihiro Yamashita, Kholqillah Ardhian Ilman, Takahiro Kunimine and Yuji Sato
J. Manuf. Mater. Process. 2023, 7(6), 192; https://doi.org/10.3390/jmmp7060192 - 28 Oct 2023
Cited by 1 | Viewed by 1887
Abstract
Cracks usually generate during the formation of beads composed of a WC-12mass%Co cemented carbide by the laser metal deposition (LMD). Measuring temperatures of the formed bead and substrate during the LMD process is important for realizing crack-free beads. In this study, temperatures of [...] Read more.
Cracks usually generate during the formation of beads composed of a WC-12mass%Co cemented carbide by the laser metal deposition (LMD). Measuring temperatures of the formed bead and substrate during the LMD process is important for realizing crack-free beads. In this study, temperatures of the substrate around the formed bead during the LMD process were measured using a thermoviewer. Temperatures of the formed beads during the LMD process were predicted by simulation based on the thermal conduction analysis using the experimentally measured temperatures of the substrate. The experimental results obtained during forming the WC-12mass%Co cemented carbide beads on JIS SKH51 (ISO HS-6-5-2) substrates showed that the maximal temperatures of the substrates at 0.2 mm away from the center of the formed beads ranged from 229 °C to 341 °C at laser powers ranging from 80 W to 160 W. The predicted maximal temperatures of the formed beads were in the range of 2433 °C to 4491 °C in the simulation using a laser absorption coefficient of 0.35 for the substrate. Validity of these simulation results was discussed based on the melting point of the substrate and microstructures of the formed WC-12mass%Co cemented carbide beads. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

19 pages, 17042 KiB  
Article
On the Processability and Microstructural Evolution of CuCrZr in Multilayer Laser-Directed Energy Deposition Additive Manufacturing via Statistical and Experimental Methods
by Ali Zardoshtian, Reza Esmaeilizadeh, Mazyar Ansari, Mohsen K. Keshavarz, Hamid Jahed and Ehsan Toyserkani
J. Manuf. Mater. Process. 2023, 7(4), 151; https://doi.org/10.3390/jmmp7040151 - 18 Aug 2023
Viewed by 2387
Abstract
Laser-directed energy deposition (LDED) is a promising technology for coating, repairing, and building near-net-shape 3D structures. However, the processing of copper alloys, specifically, has presented a significant challenge due to their low laser absorptivity at the 1060 nm laser wavelength and high thermal [...] Read more.
Laser-directed energy deposition (LDED) is a promising technology for coating, repairing, and building near-net-shape 3D structures. However, the processing of copper alloys, specifically, has presented a significant challenge due to their low laser absorptivity at the 1060 nm laser wavelength and high thermal conductivity. This study undertook a methodical examination by employing a 2 kW disk laser, operating at a wavelength of 1064 nm, and a coaxial nozzle head to comprehensively examine the processability of the highly conductive CuCrZr alloy for expanding the range of materials that can be successfully processed using LDED. The investigation focuses not only on optimizing the input process parameters that are the laser power, scanning speed, powder feed rate, and overlap ratio, but also on planning the toolpath trajectory, as these factors were found to exert a substantial influence on processability, geometrical accuracy, and the occurrence of defects such as lack of fusion. The optimal toolpath trajectory discovered involved implementing a zigzag strategy combined with a 90° rotation of the scanning direction. Additionally, a start point rotation was considered between each layer to even out the deposition of the layers. Moreover, a contour with a radial path at the corners was introduced to enhance the overall trajectory. Based on the hierarchal experimental study, the appropriate ranges for the key process parameters that leads to 99.99% relative density have been identified. They were found to be from 1100 up to 2000 W for the laser power (P), and from 0.003 up to 0.016 g/mm for the amount of powder that is fed to the melt pool distance (F/V). Regarding the influence of process parameters on the microstructure of the samples with equal deposition height, it was observed that varying combinations of process parameters within the optimal processing window resulted in variations in grain size ranging from 105 to 215 µm. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

13 pages, 5861 KiB  
Article
Semi-Continuous Functionally Graded Material Austenitic to Super Duplex Stainless Steel Obtained by Laser-Based Directed Energy Deposition
by Juan Carlos Pereira, David Aguilar, Iosu Tellería, Raul Gómez and María San Sebastian
J. Manuf. Mater. Process. 2023, 7(4), 150; https://doi.org/10.3390/jmmp7040150 - 12 Aug 2023
Cited by 4 | Viewed by 1514
Abstract
In this work, a semi-continuous functionally graded material (FGM) between an austenitic and a super duplex stainless steel was obtained. These materials are of great interest for the chemical, offshore, and oil and gas sectors since the austenitic stainless steel type 316L is [...] Read more.
In this work, a semi-continuous functionally graded material (FGM) between an austenitic and a super duplex stainless steel was obtained. These materials are of great interest for the chemical, offshore, and oil and gas sectors since the austenitic stainless steel type 316L is common (and not so expensive) and super duplex stainless steels have better mechanical and corrosion resistance but are more expensive and complex in their microstructural phases formation and the obtention of the balance between their main phases. Using directed energy deposition, it was possible to efficiently combine two powders of different chemical compositions by automated mixing prior to their delivery into the nozzle, coaxially to the laser beam for melting. A dense material via additive manufacturing was obtained, with minimum defectology and with a semi-continuous and controlled chemical compositional gradient in the manufactured part. The evolution of ferrite formation has been verified and the phase fraction measured. The resulting microstructure, austenite/ferrite ratio, and hardness variations were evaluated, starting from 100% austenitic stainless-steel composition and with variants of 5% in wt.% until achieving 100% of super duplex steel at the end of the part. Finally, the correlation between the increase in hardness of the FGM with the increase in the ferrite phase area fraction was verified. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

19 pages, 11821 KiB  
Article
Fabrication of Bimetallic High-Strength Low-Alloy Steel/Si-Bronze Functionally Graded Materials Using Wire Arc Additive Manufacturing
by Marwan M. El-Husseiny, Abdelrahman A. Baraka, Omar Oraby, Ehab A. El-Danaf and Hanadi G. Salem
J. Manuf. Mater. Process. 2023, 7(4), 138; https://doi.org/10.3390/jmmp7040138 - 31 Jul 2023
Cited by 4 | Viewed by 2667
Abstract
In this paper, bimetallic functionally graded structures were fabricated using wire and arc additive manufacturing (WAAM). The bimetallic walls were built by depositing Si-Bronze and high-strength low-alloy (HSLA) steel, successively. The microstructural evolution of the built structures, especially within the fusion zone between [...] Read more.
In this paper, bimetallic functionally graded structures were fabricated using wire and arc additive manufacturing (WAAM). The bimetallic walls were built by depositing Si-Bronze and high-strength low-alloy (HSLA) steel, successively. The microstructural evolution of the built structures, especially within the fusion zone between the dissimilar alloys, was investigated in relation to their mechanical properties. The built bimetallic walls showed a high level of integrity. An overall interface length of 9 mm was investigated for microstructural evolution, elemental mapping and microhardness measurements along the building direction. Microhardness profiles showed a gradual transition in hardness passing through the diffusion zone with no evidence for intermetallic compounds. Failure of the tensile specimens occurred at the Si-Bronze region, as expected. Bending tests confirmed good ductility of the joint between the dissimilar alloys. Direct shear test results proved a shear strength comparable to that of HSLA steel. The obtained results confirm that it is appropriate to fabricate HSLA steel/Si-Bronze FGMs using WAAM technology. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

21 pages, 18729 KiB  
Article
Influence of the Chemical Composition on the Solidification Path, Strengthening Mechanisms and Hardness of Ni-Cr-Si-Fe-B Self-Fluxing Alloys Obtained by Laser-Directed Energy Deposition
by Juan Carlos Pereira, Mari Carmen Taboada, Andrea Niklas, Emilio Rayón and Jerome Rocchi
J. Manuf. Mater. Process. 2023, 7(3), 110; https://doi.org/10.3390/jmmp7030110 - 5 Jun 2023
Cited by 4 | Viewed by 2219
Abstract
Nickel-based Ni-Cr-Si-B self-fluxing alloys are excellent candidates to replace cobalt-based alloys in aeronautical components. In this work, metal additive manufacturing by directed energy deposition using a laser beam (DED-LB, also known as LMD) and gas-atomized powders as a material feedstock is presented as [...] Read more.
Nickel-based Ni-Cr-Si-B self-fluxing alloys are excellent candidates to replace cobalt-based alloys in aeronautical components. In this work, metal additive manufacturing by directed energy deposition using a laser beam (DED-LB, also known as LMD) and gas-atomized powders as a material feedstock is presented as a potential manufacturing route for the complex processing of these alloys. This research deals with the advanced material characterization of these alloys obtained by LMD and the study and understanding of their solidification paths and strengthening mechanisms. The as-built microstructure, the Vickers hardness at room temperature and at high temperatures, the nanoindentation hardness and elastic modulus of the main phases and precipitates, and the strengthening mechanisms were studied in bulk cylinders manufactured under different chemical composition grades and DED-LB/p process parameter sets (slow, normal, and fast deposition speeds), with the aim of determining the influence of the chemical composition in commercial Ni-Cr-Si-Fe-B alloys. The hardening of Ni-Cr-Si-Fe-B alloys obtained by LMD is a combination of the solid solution hardening of gamma nickel dendrites and eutectics and the contribution of the precipitation hardening of small chromium-rich carbides and hard borides evenly distributed in the as-built microstructure. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Graphical abstract

15 pages, 4441 KiB  
Article
Laser In Situ Synthesis of Gradient Fe-Ti Composite during Direct Energy Deposition Process
by Igor Shishkovsky, Nina Kakovkina, Ekaterina Nosova and Alexander Khaimovich
J. Manuf. Mater. Process. 2023, 7(2), 66; https://doi.org/10.3390/jmmp7020066 - 14 Mar 2023
Cited by 2 | Viewed by 1919
Abstract
The suitability of the direct energy deposition process of exothermic powders Fe-Ti in joining dissimilar metals to produce small parts of a complete shape for various applications is considered. The procedure of the direct energy deposition of commercial pure iron and titanium in [...] Read more.
The suitability of the direct energy deposition process of exothermic powders Fe-Ti in joining dissimilar metals to produce small parts of a complete shape for various applications is considered. The procedure of the direct energy deposition of commercial pure iron and titanium in various proportions and the modes of the process are described. Optical microscopy and SEM with EDX analysis, X-ray analysis, and microhardness measurements of laser-fabricated intermetallics are applied. Intermetallic compounds of FeTi, Fe2Ti, eutectoids, complex titanium oxides and nitrides, and iron carbides are found. Interlayer and trans-layer cracks and pores are observed. A microhardness growth from 150 HV to 900 HV was obtained for all samples due to the precipitation of brittle intermetallic phases in the gradient Fe-Ti system during the DED. The dispersion of microhardness values becomes significant in Ti-rich areas; there, pores and cracks are found. The revealed structure features are considered in relation to published results and explained. Increased concentrations of Ti to Ti + Fe = 3:1 on the Fe- and Fe + Ti -substrate with concentrations of Ti + Fe = 1:1 and Ti + Fe = 1:3 lead to increasing hardness and its distribution, but also increases in residual microstress. Recommendations are given to reduce the power during the direct energy deposition of titanium layers and to apply Fe-substrate, which can reduce residual stress, pores, and cracks. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

18 pages, 10358 KiB  
Article
Strain-Based Fatigue Experimental Study on Ti–6Al–4V Alloy Manufactured by Electron Beam Melting
by Alberto David Pertuz-Comas, Octavio Andrés González-Estrada, Elkin Martínez-Díaz, Diego Fernando Villegas-Bermúdez and Jorge Guillermo Díaz-Rodríguez
J. Manuf. Mater. Process. 2023, 7(1), 25; https://doi.org/10.3390/jmmp7010025 - 18 Jan 2023
Cited by 6 | Viewed by 2384
Abstract
Additive manufacturing (AM) by electron beam melting (EBM) is a technique used to manufacture parts by melting powder metal layer-by-layer with an electron beam in a high vacuum, thereby generating a 3D topology. This paper studies the low-cycle fatigue of Ti–6Al–4V specimens obtained [...] Read more.
Additive manufacturing (AM) by electron beam melting (EBM) is a technique used to manufacture parts by melting powder metal layer-by-layer with an electron beam in a high vacuum, thereby generating a 3D topology. This paper studies the low-cycle fatigue of Ti–6Al–4V specimens obtained by EBM. Static tests were carried out according to ASTM E8 for a yield stress of 1023 MPa, a fracture stress of 1102 MPa, and a maximum tensile strength of 1130 MPa with a maximum true normal strain at fracture εmax = 9.0% and an elastic modulus of 120 GPa. Then, fatigue tests were conducted at a load inversion rate of R = −1. It was observed that the material exhibited plastic strain softening, which was attributed to the Bauschinger effect. These results were plotted on a strain vs. life (ε−N) curve using the Ong version of the Coffin–Manson rule and the Baumel–Seager and Meggiolaro–Castro rules. The results were compared to forged Ti–6Al–4V alloys. The cyclic stress–strain behavior was described with the Ramberg–Osgood model. Finally, the fracture surface was analyzed using scanning electron microscopy (SEM) to observe the formation of primary cracks. The fracture morphology showed a mixed surface, also known as a “quasi-cleavage”, which is characterized by dimples, cleavage facets, extensive primary cracks with broken slipping planes, and a large number of inclusions. This phenomenon caused a possible brittle behavior in the material. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

18 pages, 22677 KiB  
Article
Influence of Wire Arc Additive Manufacturing Beads’ Geometry and Building Strategy: Mechanical and Structural Behavior of ER70S-6 Prismatic Blocks
by Ahmed Elsokaty, Omar Oraby, Sameha Sadek and Hanadi G. Salem
J. Manuf. Mater. Process. 2023, 7(1), 3; https://doi.org/10.3390/jmmp7010003 - 24 Dec 2022
Cited by 11 | Viewed by 3655
Abstract
Wire arc additive manufacturing (WAAM) with high deposition rates has attracted industry interest for the demonstrated economic production of medium-to-large-scale metallic components. The structural integrity and mechanical properties of the built parts depend on the selection of the optimum deposition parameters and the [...] Read more.
Wire arc additive manufacturing (WAAM) with high deposition rates has attracted industry interest for the demonstrated economic production of medium-to-large-scale metallic components. The structural integrity and mechanical properties of the built parts depend on the selection of the optimum deposition parameters and the tool path strategy. In this study, an alternate orthogonal deposition strategy was employed. The influence of the beads’ geometry and the associated heat input on the mechanical and structural behavior of mild steel (ER70S-6) were investigated. The influence of the bead width (BW) and the overlapping percentage (OP) between the adjacent beads on the average and layer-by-layer hardness of the blocks along the building direction were evaluated. Tensile strength was also characterized. The alternate orthogonal building strategy enhanced the geometrical uniformity of the built blocks and the microstructural isotropy along the building direction. Increasing the BW increased the total heat input per bead per layer, which significantly reduced the hardness and tensile strength of the built blocks by 19% and 17% compared to 8% and 7% when increasing the OP, respectively. Total heat input, number of heating cycles, and cooling rates triggered the phases formed, and their morphologies along the building direction were also characterized. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

18 pages, 7234 KiB  
Article
Residual Heat Effect on the Melt Pool Geometry during the Laser Powder Bed Fusion Process
by Subin Shrestha and Kevin Chou
J. Manuf. Mater. Process. 2022, 6(6), 153; https://doi.org/10.3390/jmmp6060153 - 30 Nov 2022
Cited by 2 | Viewed by 2521
Abstract
The continuous back-and-forth melting of the powder bed during the laser powder bed fusion (LPBF) process leads to the development of residual heat, which affects the melt pool geometry as the laser scan progresses. The magnitude of the residual heat depends on the [...] Read more.
The continuous back-and-forth melting of the powder bed during the laser powder bed fusion (LPBF) process leads to the development of residual heat, which affects the melt pool geometry as the laser scan progresses. The magnitude of the residual heat depends on the scan length, hatch spacing, location on the track, etc. In this regard, back-and-forth raster scanning was performed to investigate the effect of the scan length and hatch spacing on the melt pool size at different locations along the laser travel direction. Multi-track specimens with different scan lengths (0.5 mm, 1 mm, and 1.5 mm) were fabricated using 195 W laser power, three scan speeds (375 mm/s, 750 mm/s, and 1500 mm/s), and two hatch spacings (80 µm and 120 µm). A white light interferometer was used to analyze the surface morphologies of the fabricated samples, and metallography was performed to observe the melt pool boundary. The melt pool boundary obtained at different locations revealed that the effect of the residual heat was maximal in the laser-turn region. In addition, a powder scale numerical model was developed to investigate the effect of temperature distribution on the melt pool geometry. The numerical results show that the laser-turn region was most affected by the residual heat, as the melt pool from the two tracks merged. The depth of the melt pool increased with increasing track numbers, while the track height decreased. The addition of a second layer of powder showed that the inherent surface variation in the first layer leads to the difference in the actual layer thickness of the second layer. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

16 pages, 7466 KiB  
Article
Influence of the L-PBF Process Atmosphere on the Microstructure and Tensile Properties of AISI 318LN Duplex Stainless Steel
by Markus Mirz, Simone Herzog, Christoph Broeckmann and Anke Kaletsch
J. Manuf. Mater. Process. 2022, 6(2), 32; https://doi.org/10.3390/jmmp6020032 - 10 Mar 2022
Cited by 13 | Viewed by 3567
Abstract
Duplex stainless steels (DSSs) have excellent mechanical properties, owing to their austenitic-ferritic microstructure. The phase equilibrium strongly depends on solidification conditions and chemical composition, where elemental nitrogen significantly stabilizes the austenitic phase. When DSSs are processed by laser powder bed fusion (L-PBF) under [...] Read more.
Duplex stainless steels (DSSs) have excellent mechanical properties, owing to their austenitic-ferritic microstructure. The phase equilibrium strongly depends on solidification conditions and chemical composition, where elemental nitrogen significantly stabilizes the austenitic phase. When DSSs are processed by laser powder bed fusion (L-PBF) under an argon atmosphere, the rapid cooling rates result in an undesirable fully ferritic microstructure. To better understand the microstructure formation, this study examined the influence of the L-PBF process atmosphere on the porosity, microstructure, and mechanical properties of DSS AISI 318LN. Gaseous argon and nitrogen were used as a protective atmosphere, and specimens were analyzed in the as-built and post-processed conditions via optical and electron microscopy, electron backscatter diffraction, and tensile testing. Specimens processed under a nitrogen atmosphere showed a lower initial density in the as-built conditions, and tended to form more lack-of-fusion and gas pores compared to specimens processed under argon. The different defect types in nitrogen-processed specimens were still present after solution-annealing and quenching, leading to a 13% lower tensile strength and 43% lower elongation at fracture. Differences in phase equilibrium caused by the process atmosphere could not be established. All differences in porosity can be minimized by hot isostatic pressing, thus resulting in comparable mechanical properties of argon- and nitrogen-processed specimens. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

21 pages, 7108 KiB  
Article
Microstructure and Mechanical Properties of Ti-6Al-4V Additively Manufactured by Electron Beam Melting with 3D Part Nesting and Powder Reuse Influences
by Priti Wanjara, David Backman, Fatih Sikan, Javad Gholipour, Robert Amos, Prakash Patnaik and Mathieu Brochu
J. Manuf. Mater. Process. 2022, 6(1), 21; https://doi.org/10.3390/jmmp6010021 - 1 Feb 2022
Cited by 24 | Viewed by 6063
Abstract
To better support the transition to more industrial uses of additive manufacturing, this study examined the use of an Arcam Q20+ industrial 3D printer for producing heavily nested Ti-6Al-4V parts with both in-specification (IS) and out of specification (OS) oxygen content in reused [...] Read more.
To better support the transition to more industrial uses of additive manufacturing, this study examined the use of an Arcam Q20+ industrial 3D printer for producing heavily nested Ti-6Al-4V parts with both in-specification (IS) and out of specification (OS) oxygen content in reused grade 5 powder chemistries. Both the OS and IS powder chemistries were evaluated to understand their impact on build integrity and on static and fatigue performance. The results from our evaluations showed that controlling the bed preheat temperature in the Q20+ to relatively low values (326–556 °C) was effective in limiting microstructural coarsening during the long build time and enabled adequate/balanced performance vis à vis the tensile strength and ductility. Overall, the tensile properties of the IS Ti-6Al-4V material in the as-built and machined states fully met the requirements of ASTM F2924-14. By contrast, the ductility was compromised at oxygen levels above 0.2 wt.% (OS) in Ti-6Al-4V produced by EBM. Removal of the surface layer by machining increased the consistency and performance of the IS and OS Ti-6Al-4V materials. The fatigue behaviour of the EBM Ti-6Al-4V material was in the range of properties produced by casting. Due to the strong influence of both the surface finish and oxygen content on the fatigue strength, the IS Ti-6Al-4V material exhibited the highest performance, with results that were in the range of parts that had been cast plus hot isostatically pressed. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

Review

Jump to: Research

27 pages, 13897 KiB  
Review
Optical Methods of Error Detection in Additive Manufacturing: A Literature Review
by Brianna Wylie and Carl Moore, Jr.
J. Manuf. Mater. Process. 2023, 7(3), 80; https://doi.org/10.3390/jmmp7030080 - 23 Apr 2023
Cited by 4 | Viewed by 3223
Abstract
Additive Manufacturing (AM) has been a growing industry, specifically when trying to mass produce products more cheaply and efficiently. However, there are too many current setbacks for AM to replace traditional production methods. One of the major problems with 3D printing is the [...] Read more.
Additive Manufacturing (AM) has been a growing industry, specifically when trying to mass produce products more cheaply and efficiently. However, there are too many current setbacks for AM to replace traditional production methods. One of the major problems with 3D printing is the high error rate compared to other forms of production. These high error rates lead to wasted material and valuable time. Furthermore, even when parts do not result in total failure, the outcome can often be less than desirable, with minor misprints or porosity causing weaknesses in the product. To help mitigate error and better understand the quality of a given print, the field of AM monitoring in research has been ever-growing. This paper looks through the literature on two AM processes: fused deposition modeling (FDM) and laser bed powder fusion (LBPF) printers, to see the current process monitoring architecture. The review focuses on the optical monitoring of 3D printing and separates the studies by type of camera. This review then summarizes specific trends in literature, points out the current limitations of the field of research, and finally suggests architecture and research focuses that will help forward the process monitoring field. Full article
(This article belongs to the Special Issue Advances in Metal Additive Manufacturing/3D Printing)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-12
Back to TopTop