Molecules

2024

Jump to: 2023, 2022

14 pages, 3461 KiB

Open AccessArticle

Efficient Isolation of Cellulose Nanocrystals from Seaweed Waste via a Radiation Process and Their Conversion to Porous Nanocarbon for Energy Storage System

by Jin-Ju Jeong, Jae-Hun Kim and Jung-Soo Lee

Molecules 2024, 29(20), 4844; https://doi.org/10.3390/molecules29204844 - 13 Oct 2024

Viewed by 883

Abstract

This article presents an efficient method for isolating cellulose nanocrystals (CNcs) from seaweed waste using a combination of electron beam (E-beam) irradiation and acid hydrolysis. This approach not only reduces the chemical consumption and processing time, but also improves the crystallinity and yield [...] Read more.

This article presents an efficient method for isolating cellulose nanocrystals (CNcs) from seaweed waste using a combination of electron beam (E-beam) irradiation and acid hydrolysis. This approach not only reduces the chemical consumption and processing time, but also improves the crystallinity and yield of the CNcs. The isolated CNcs were then thermally annealed at 800 and 1000 °C to produce porous nanocarbon materials, which were characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy to assess their structural and chemical properties. Electrochemical testing of electrical double-layer capacitors demonstrated that nanocarbon materials derived from seaweed waste-derived CNcs annealed at 1000 exhibited superior capacitance and stability. This performance is attributed to the formation of a highly ordered graphitic structure with a mesoporous architecture, which facilitates efficient ion transport and enhanced electrolyte accessibility. These findings underscore the potential of seaweed waste-derived nanocarbon as a sustainable and high-performance material for energy storage applications, offering a promising alternative to conventional carbon sources. Full article

► Show Figures

Figure 1

18 pages, 3537 KiB

Open AccessArticle

Simultaneous Formate and Syngas Conversion Boosts Growth and Product Formation by Clostridium ragsdalei

by Irina Schwarz, Angelina Angelina, Philip Hambrock and Dirk Weuster-Botz

Molecules 2024, 29(11), 2661; https://doi.org/10.3390/molecules29112661 - 4 Jun 2024

Cited by 1 | Viewed by 881

Abstract

Electrocatalytic CO₂ reduction to CO and formate can be coupled to gas fermentation with anaerobic microorganisms. In combination with a competing hydrogen evolution reaction in the cathode in aqueous medium, the in situ, electrocatalytic produced syngas components can be converted by an [...] Read more.

Electrocatalytic CO₂ reduction to CO and formate can be coupled to gas fermentation with anaerobic microorganisms. In combination with a competing hydrogen evolution reaction in the cathode in aqueous medium, the in situ, electrocatalytic produced syngas components can be converted by an acetogenic bacterium, such as Clostridium ragsdalei, into acetate, ethanol, and 2,3-butanediol. In order to study the simultaneous conversion of CO, CO₂, and formate together with H₂ with C. ragsdalei, fed-batch processes were conducted with continuous gassing using a fully controlled stirred tank bioreactor. Formate was added continuously, and various initial CO partial pressures (pCO₀) were applied. C. ragsdalei utilized CO as the favored substrate for growth and product formation, but below a partial pressure of 30 mbar CO in the bioreactor, a simultaneous CO₂/H₂ conversion was observed. Formate supplementation enabled 20–50% higher growth rates independent of the partial pressure of CO and improved the acetate and 2,3-butanediol production. Finally, the reaction conditions were identified, allowing the parallel CO, CO₂, formate, and H₂ consumption with C. ragsdalei at a limiting CO partial pressure below 30 mbar, pH 5.5, n = 1200 min⁻¹, and T = 32 °C. Thus, improved carbon and electron conversion is possible to establish efficient and sustainable processes with acetogenic bacteria, as shown in the example of C. ragsdalei. Full article

► Show Figures

Graphical abstract

23 pages, 2440 KiB

Open AccessReview

Catalytic Conversion of Levulinic Acid into 2-Methyltetrahydrofuran: A Review

by Sreedhar Gundekari and Sanjib Kumar Karmee

Molecules 2024, 29(1), 242; https://doi.org/10.3390/molecules29010242 - 2 Jan 2024

Cited by 2 | Viewed by 2015

Abstract

Biomass-derived furanics play a pivotal role in chemical industries, with 2-methyltetrahydrofuran (2-MTHF), a hydrogenated product of levulinic acid (LA), being particularly significant. 2-MTHF finds valuable applications in the fuel, polymer, and chemical sectors, serving as a key component in P-series biofuel and acknowledged [...] Read more.

Biomass-derived furanics play a pivotal role in chemical industries, with 2-methyltetrahydrofuran (2-MTHF), a hydrogenated product of levulinic acid (LA), being particularly significant. 2-MTHF finds valuable applications in the fuel, polymer, and chemical sectors, serving as a key component in P-series biofuel and acknowledged as a renewable solvent for various chemical processes. Numerous research groups have explored catalytic systems to efficiently and selectively convert LA to 2-MTHF, using diverse metal-supported catalysts in different solvents under batch or continuous process conditions. This comprehensive review delves into the impact of metal-supported catalysts, encompassing co-metals and co-catalysts, on the synthesis of 2-MTHF from LA. The article also elucidates the influence of different reaction parameters, such as temperature, type and quantity of hydrogen source, and time. Furthermore, the review provides insights into reaction mechanisms for all documented catalytic systems. Full article

► Show Figures

Scheme 1

2023

Jump to: 2024, 2022

11 pages, 3181 KiB

Open AccessArticle

Preparation of Cellulose-Based Activated Carbon Fibers with Improved Yield and Their Methylene Chloride Adsorption Evaluation

by Jin-Soo Jeong and Byung-Joo Kim

Molecules 2023, 28(19), 6997; https://doi.org/10.3390/molecules28196997 - 9 Oct 2023

Cited by 3 | Viewed by 1799

Abstract

The recent rapid growth of the battery industry has led to a rapid increase in methylene chloride emissions. Methylene chloride causes health and social problems in humans. In this study, cellulose-based activated carbon fibers (CACFs) with improved yield were prepared for the removal [...] Read more.

The recent rapid growth of the battery industry has led to a rapid increase in methylene chloride emissions. Methylene chloride causes health and social problems in humans. In this study, cellulose-based activated carbon fibers (CACFs) with improved yield were prepared for the removal of methylene chloride. The concentration of ammonium phosphate in the pretreatment controlled the crosslink density of cellulose fibers and improved the yield. From the results, the specific surface area and total pore volume of cellulose-based activated carbon fibers pretreated with ammonium phosphate (AP-CACFs) were determined to be 1920–2060 m²/g and 0.83–1.02 cm³/g, respectively, and the total yield improved by 6.78–11.59% compared to that of CACFs (4.97%). In particular, a correlation between the textural properties of CACFs and methylene chloride adsorption/desorption behavior was obtained. This correlation can be used to develop efficient adsorbents for methylene chloride removal. Full article

► Show Figures

Graphical abstract

23 pages, 1978 KiB

Open AccessReview

A Review of the Design and Performance of Catalysts for Hydrothermal Gasification of Biomass to Produce Hydrogen-Rich Gas Fuel

by Kapil Khandelwal, Philip Boahene, Sonil Nanda and Ajay K. Dalai

Molecules 2023, 28(13), 5137; https://doi.org/10.3390/molecules28135137 - 30 Jun 2023

Cited by 9 | Viewed by 2549

Abstract

Supercritical water gasification has emerged as a promising technology to sustainably convert waste residues into clean gaseous fuels rich in combustible gases such as hydrogen and methane. The composition and yield of gases from hydrothermal gasification depend on process conditions such as temperature, [...] Read more.

Supercritical water gasification has emerged as a promising technology to sustainably convert waste residues into clean gaseous fuels rich in combustible gases such as hydrogen and methane. The composition and yield of gases from hydrothermal gasification depend on process conditions such as temperature, pressure, reaction time, feedstock concentration, and reactor geometry. However, catalysts also play a vital role in enhancing the gasification reactions and selectively altering the composition of gas products. Catalysts can also enhance hydrothermal reforming and cracking of biomass to achieve desired gas yields at moderate temperatures, thereby reducing the energy input of the hydrothermal gasification process. However, due to the complex hydrodynamics of supercritical water, the literature is limited regarding the synthesis, application, and performance of catalysts used in hydrothermal gasification. Hence, this review provides a detailed discussion of different heterogeneous catalysts (e.g., metal oxides and transition metals), homogeneous catalysts (e.g., hydroxides and carbonates), and novel carbonaceous catalysts deployed in hydrothermal gasification. The article also summarizes the advantages, disadvantages, and performance of these catalysts in accelerating specific reactions during hydrothermal gasification of biomass, such as water–gas shift, methanation, hydrogenation, reforming, hydrolysis, cracking, bond cleavage, and depolymerization. Different reaction mechanisms involving a variety of catalysts during the hydrothermal gasification of biomass are outlined. The article also highlights recent advancements with recommendations for catalytic supercritical water gasification of biomass and its model compounds, and it evaluates process viability and feasibility for commercialization. Full article

► Show Figures

Figure 1

12 pages, 3800 KiB

Open AccessArticle

Characterization of Dissolved Organic Matter Released from Aged Biochar: A Comparative Study of Two Feedstocks and Multiple Aging Approaches

by Yan Yue, Leqi Xu, Guitong Li, Xiang Gao and Hongfang Ma

Molecules 2023, 28(11), 4558; https://doi.org/10.3390/molecules28114558 - 5 Jun 2023

Cited by 6 | Viewed by 1698

Abstract

Dissolved organic matter (DOM) plays important roles in environmental ecosystems. While many studies have explored the characteristics of aged biochar, limited information is available about the properties of DOM derived from aged biochar. In this study, biochar obtained from maize stalk and soybean [...] Read more.

Dissolved organic matter (DOM) plays important roles in environmental ecosystems. While many studies have explored the characteristics of aged biochar, limited information is available about the properties of DOM derived from aged biochar. In this study, biochar obtained from maize stalk and soybean straw were aged using farmland or vegetable-soil solution, as well as soil solution containing hydrogen peroxide (H₂O₂). Chemical composition of the extracted DOM from the aged biochar was analyzed via excitation–emission matrix coupled with fluorescence regional integration (FRI) and parallel factor analysis (PARAFAC). Obtained results showed that biochar aged with H₂O₂-enriched soil solution had higher water-soluble organic carbon, ranging from 147.26–734.13% higher than the controls. FRI analysis revealed fulvic and humic-like organics as the key components, with a considerable increase of 57.48–235.96% in the humic-like component, especially in soybean-straw-aged biochar. PARAFAC identified four humic-like substance components. Concurrently, the aromaticity and humification of the aged-biochar-derived DOM increased, while the molecular weight decreased. These findings suggest that DOM derived from aged biochar, with a high content of humic-like organics, might impact the mobility and toxicity of pollutants in soil. Full article

► Show Figures

Figure 1

17 pages, 6818 KiB

Open AccessArticle

Efficient Conversion of Lignin to Aromatics via Catalytic Fast Pyrolysis over Niobium-Doped HZSM-5

by Zhen Li, Huihui Zhang, Deshi Yang, Zhipeng Hu, Fengqiang Wang and Zhijun Zhang

Molecules 2023, 28(10), 4245; https://doi.org/10.3390/molecules28104245 - 22 May 2023

Cited by 5 | Viewed by 2017

Abstract

A niobium-doped HZSM-5 (H[Nb]ZSM-5) was prepared by a hydrothermal synthesis method. The morphology, phase structure, composition, pore structure, and acid content of the catalyst were characterized using a series of analysis techniques such as scanning electron microscope (SEM), energy-dispersive X-ray (EDX), X-ray diffraction [...] Read more.

A niobium-doped HZSM-5 (H[Nb]ZSM-5) was prepared by a hydrothermal synthesis method. The morphology, phase structure, composition, pore structure, and acid content of the catalyst were characterized using a series of analysis techniques such as scanning electron microscope (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption, and temperature programmed desorption measurements (NH₃-TPD). The H[Nb]ZSM-5 catalyst fully remained within the crystal framework and pore structure of HZSM-5. Meanwhile, introduction of niobium (V) endowed the catalyst with both Lewis acid and Bronsted acid sites. Catalytic fast pyrolysis (CFP) of alkali lignin was carried out through a pyrolysis and gas chromatography-mass spectrometry (Py-GC/MS) at 650 °C and atmospheric pressure. The results indicated that H[Nb]ZSM-5 can efficiently and selectively convert lignin into monoaromatic hydrocarbons (MAHs), compared to the control HZSM-5. Catalyzed by H[Nb]ZSM-5, the content of MAHs and aliphatic hydrocarbons reached 43.4% and 20.8%, respectively; while under the catalysis of HZSM-5, these values were 35.5% and 3.2%, respectively. H[Nb]ZSM-5 remarkably lowered the phenol content to approximately 2.8%, which is far lower than the content (24.9%) obtained under HZSM-5 catalysis. Full article

► Show Figures

Figure 1

18 pages, 3265 KiB

Open AccessArticle

Effect of Different Phosphates on Pyrolysis Temperature-Dependent Carbon Sequestration and Phosphorus Release Performance in Biochar

by Tianxia Bai, Wenge Ma, Wenhui Li, Jinling Jiang, Jiamin Chen, Rui Cao, Wenjie Yang, Dan Dong, Tingwu Liu and Yonggang Xu

Molecules 2023, 28(9), 3950; https://doi.org/10.3390/molecules28093950 - 8 May 2023

Cited by 3 | Viewed by 1985

Abstract

Carbon sequestration is the primary function of biochar. Hence, it is necessary to design biochar with high carbon (C) retention and low C loss. In this study, three P compounds, including KH₂PO₄, Ca(H₂PO₄)₂, [...] Read more.

Carbon sequestration is the primary function of biochar. Hence, it is necessary to design biochar with high carbon (C) retention and low C loss. In this study, three P compounds, including KH₂PO₄, Ca(H₂PO₄)₂, and NH₄H₂PO₄, were premixed with corn stalk (1:4, w/w), aiming to produce biochars (CSB+K, CSB+Ca, and CSB+N) with high C sequestration and slow release of P at three temperatures (300, 500, and 700 °C). The addition of all P sources obviously increased C retention, with the order of NH₄H₂PO₄ (65.6–83.5%) > Ca(H₂PO₄)₂ (60.4–78.2%) > KH₂PO₄ (50.1–76.1%), compared with the pristine biochar (47.8–73.6%). The addition of Ca(H₂PO₄)₂ and KH₂PO₄ led to an increase in aromaticity and graphitization, as evidenced by H/C, FTIR, Raman and XPS analysis, whereas an opposite result occurred on CSB+N. Furthermore, all three phosphates reduced C loss of biochars with H₂O₂ oxidation, and CSB+Ca showed the best effect. Ca(H₂PO₄)₂ and KH₂PO₄ pretreated biochars had higher resistance to K₂Cr₂O₇ oxidation and thermal treatment. In contrast, the C loss of NH₄H₂PO₄-added biochar at 500 and 700 °C with K₂Cr₂O₇ oxidation was increased by 54% and 36%, respectively. During the pyrolysis process, Ca(H₂PO₄)₂ was transformed into insoluble Ca₂P₂O₇, leading to the lowest P release rate of CSB+Ca. This study indicates that co-pyrolysis of corn stalk and Ca(H₂PO₄)₂ is optimal for increasing C retention, enhancing C stability and improving slow-release performance of P regardless of pyrolysis temperature. Full article

► Show Figures

Figure 1

15 pages, 22343 KiB

Open AccessArticle

Grape Pomace as a Natural Source of Phenolic Compounds: Solvent Screening and Extraction Optimization

by Rafaela P. Rodrigues, Ana M. Sousa, Licínio M. Gando-Ferreira and Margarida J. Quina

Molecules 2023, 28(6), 2715; https://doi.org/10.3390/molecules28062715 - 17 Mar 2023

Cited by 15 | Viewed by 3315

Abstract

The optimization of extraction by using solvents of phenolic compounds (TPh) of grape pomace (GP) based on a central composite design was investigated. The GP was characterized, and preliminary assays were conducted with five different solvents (water, ethanol, acetone, methanol, and butanol) and [...] Read more.

The optimization of extraction by using solvents of phenolic compounds (TPh) of grape pomace (GP) based on a central composite design was investigated. The GP was characterized, and preliminary assays were conducted with five different solvents (water, ethanol, acetone, methanol, and butanol) and the aqueous mixtures thereof. Ethanol and acetone were revealed to be the best solvents for TPh extraction. The main extraction parameters (temperature—T, time—t, solvent concentration, and liquid–solid ratio—L/S) were optimized by using a central composite design. The optimized conditions for the ethanol extraction (T = 60 °C, t = 1.5 h, L/S = 25 mL/gdryGP) and for acetone (T = 50 °C, t = 1.5 h, L/S = 25 mL/gdryGP) were determined. Single-stage extraction revealed a TPh of 45.18 ± 9.51 mgGAE/gdryGP for acetone and a TPh of 38.70 ± 3.64 mgGAE/gdryGP for ethanol. The characterization of the extracts revealed the presence of gallic acid, caffeic acid, syringic acid, vanillic acid, chlorogenic acid, and p-coumaric acid, where the concentration of the first three compounds stands out in all extracts. A three-stage extraction increased the yield of ethanol to 63.3 mg GAE/gdryGP and the yield of acetone to 59.2 mg GAE/gdryGP. Overall, both solvents allow the extraction of phenolic compounds of grape pomace, but ethanol is commonly considered a greener solvent for this purpose. Full article

► Show Figures

Figure 1

17 pages, 2868 KiB

Open AccessArticle

Pyrolysis Atmospheres and Temperatures Co-Mediated Spectral Variations of Biochar-Derived Dissolved Organic Carbon: Quantitative Prediction and Self-Organizing Maps Analysis

by Huiying Zhang, Jinzhi Ni, Wei Qian, Shuhan Yu, Yu Xiang, Liuming Yang and Weifeng Chen

Molecules 2023, 28(5), 2247; https://doi.org/10.3390/molecules28052247 - 28 Feb 2023

Cited by 4 | Viewed by 1493

Abstract

Biochar-derived dissolved organic carbon (BDOC), as a highly activated carbonaceous fraction of biochar, significantly affects the environmental effect of biochar. This study systematically investigated the differences in the properties of BDOC produced at 300–750 °C in three atmosphere types (including N₂ and [...] Read more.

Biochar-derived dissolved organic carbon (BDOC), as a highly activated carbonaceous fraction of biochar, significantly affects the environmental effect of biochar. This study systematically investigated the differences in the properties of BDOC produced at 300–750 °C in three atmosphere types (including N₂ and CO₂ flows and air limitation) as well as their quantitative relationship with biochar properties. The results showed that BDOC in biochar pyrolyzed in air limitation (0.19–2.88 mg/g) was more than that pyrolyzed in N₂ (0.06–1.63 mg/g) and CO₂ flows (0.07–1.74 mg/g) at 450–750 °C. The aliphaticity, humification, molecular weight, and polarity of BDOC strongly depended on the atmosphere types as well as the pyrolysis temperatures. BDOC produced in air limitation contained more humic-like substances (0.65–0.89) and less fulvic-like substances (0.11–0.35) than that produced in N₂ and CO₂ flows. The multiple linear regression of the exponential form of biochar properties (H and O contents, H/C and (O+N)/C) could be used to quantitatively predict the bulk content and organic component contents of BDOC. Additionally, self-organizing maps could effectively visualize the categories of fluorescence intensity and components of BDOC from different pyrolysis atmospheres and temperatures. This study highlights that pyrolysis atmosphere types are a crucial factor controlling the BDOC properties, and some characteristics of BDOC can be quantitatively evaluated based on the properties of biochar. Full article

► Show Figures

Graphical abstract

56 pages, 10152 KiB

Open AccessReview

Niobium: The Focus on Catalytic Application in the Conversion of Biomass and Biomass Derivatives

by Luiz Oliveira, Márcio Pereira, Ana Pacheli Heitman, José Filho, Cinthia Oliveira and Maria Ziolek

Molecules 2023, 28(4), 1527; https://doi.org/10.3390/molecules28041527 - 4 Feb 2023

Cited by 13 | Viewed by 4584

Abstract

The world scenario regarding consumption and demand for products based on fossil fuels has demonstrated the imperative need to develop new technologies capable of using renewable resources. In this context, the use of biomass to obtain chemical intermediates and fuels has emerged as [...] Read more.

The world scenario regarding consumption and demand for products based on fossil fuels has demonstrated the imperative need to develop new technologies capable of using renewable resources. In this context, the use of biomass to obtain chemical intermediates and fuels has emerged as an important area of research in recent years, since it is a renewable source of carbon in great abundance. It has the benefit of not contributing to the additional emission of greenhouse gases since the CO₂ released during the energy conversion process is consumed by it through photosynthesis. In the presented review, the authors provide an update of the literature in the field of biomass transformation with the use of niobium-containing catalysts, emphasizing the versatility of niobium compounds for the conversion of different types of biomass. Full article

► Show Figures

Figure 1

20 pages, 2816 KiB

Open AccessArticle

Pyrolysis Kinetics of Byrsonima crassifolia Stone as Agro-Industrial Waste through Isoconversional Models

by Jonathan M. Sanchez-Silva, Raúl Ocampo-Pérez, Erika Padilla-Ortega, Diakaridia Sangaré, Miguel A. Escobedo-Bretado, Jorge L. Domínguez-Arvizu, Blanca C. Hernández-Majalca, Jesús M. Salinas-Gutiérrez, Alejandro López-Ortiz and Virginia Collins-Martínez

Molecules 2023, 28(2), 544; https://doi.org/10.3390/molecules28020544 - 5 Jan 2023

Cited by 4 | Viewed by 1683

Abstract

This study is aimed at the analysis of the pyrolysis kinetics of Nanche stone BSC (Byrsonima crassifolia) as an agro-industrial waste using non-isothermal thermogravimetric experiments by determination of triplet kinetics; apparent activation energy, pre-exponential factor, and reaction model, as well as thermodynamic [...] Read more.

This study is aimed at the analysis of the pyrolysis kinetics of Nanche stone BSC (Byrsonima crassifolia) as an agro-industrial waste using non-isothermal thermogravimetric experiments by determination of triplet kinetics; apparent activation energy, pre-exponential factor, and reaction model, as well as thermodynamic parameters to gather the required fundamental information for the design, construction, and operation of a pilot-scale reactor for the pyrolysis this lignocellulosic residue. Results indicate a biomass of low moisture and ash content and a high volatile matter content (≥70%), making BCS a potential candidate for obtaining various bioenergy products. Average apparent activation energies obtained from different methods (KAS, FWO and SK) were consistent in value (~123.8 kJ/mol). The pre-exponential factor from the Kissinger method ranged from 10⁵ to 10¹⁴ min⁻¹ for the highest pyrolytic activity stage, indicating a high-temperature reactive system. The thermodynamic parameters revealed a small difference between E_A and ∆H (5.2 kJ/mol), which favors the pyrolysis reaction and indicates the feasibility of the energetic process. According to the analysis of the reaction models (master plot method), the pyrolytic degradation was dominated by a decreasing reaction order as a function of the degree of conversion. Moreover, BCS has a relatively high calorific value (14.9 MJ/kg) and a relatively low average apparent activation energy (122.7 kJ/mol) from the Starink method, which makes this biomass very suitable to be exploited for value-added energy production. Full article

► Show Figures

Figure 1

2022

Jump to: 2024, 2023

16 pages, 4559 KiB

Open AccessArticle

Enhanced Adsorption of Sulfonamides by Attapulgite-Doped Biochar Prepared with Calcination

by Jianqiao Hu, Feng Liu, Yongping Shan, Zhenzhen Huang, Jingqing Gao and Wentao Jiao

Molecules 2022, 27(22), 8076; https://doi.org/10.3390/molecules27228076 - 21 Nov 2022

Cited by 4 | Viewed by 1929

Abstract

The extensive use of sulfonamides seriously threatens the safety and stability of the ecological environment. Developing green inexpensive and effective adsorbents is critically needed for the elimination of sulfonamides from wastewater. The non-modified biochar exhibited limited adsorption capacity for sulfonamides. In this study, [...] Read more.

The extensive use of sulfonamides seriously threatens the safety and stability of the ecological environment. Developing green inexpensive and effective adsorbents is critically needed for the elimination of sulfonamides from wastewater. The non-modified biochar exhibited limited adsorption capacity for sulfonamides. In this study, the attapulgite-doped biochar adsorbent (ATP/BC) was produced from attapulgite and rice straw by calcination. Compared with non-modified biochar, the specific surface area of ATP/BC increased by 73.53–131.26%, and the average pore width of ATP/BC decreased 1.77–3.60 nm. The removal rates of sulfadiazine and sulfamethazine by ATP/BC were 98.63% and 98.24%, respectively, at the mass ratio of ATP to rice straw = 1:10, time = 4 h, dosage = 2 g∙L⁻¹, pH = 5, initial concentration = 1 mg∙L⁻¹, and temperature = 20 °C. A pseudo-second-order kinetic model (R² = 0.99) and the Freundlich isothermal model (R² = 0.99) well described the process of sulfonamide adsorption on ATP/BC. Thermodynamic calculations showed that the adsorption behavior of sulfonamides on the ATP/BC was an endothermic (ΔH > 0), random (ΔS > 0), spontaneous reaction (ΔG < 0) that was dominated by chemisorption (−20 kJ∙mol⁻¹ > ΔG). The potential adsorption mechanisms include electrostatic interaction, hydrogen bonding, π–π interaction, and Lewis acid–base interactions. This study provides an optional material to treat sulfonamides in wastewater and groundwater. Full article

► Show Figures

Graphical abstract

21 pages, 3719 KiB

Open AccessArticle

Thermogravimetric Analysis and Kinetic Modeling of the AAEM-Catalyzed Pyrolysis of Woody Biomass

by Wei Wang, Romain Lemaire, Ammar Bensakhria and Denis Luart

Molecules 2022, 27(22), 7662; https://doi.org/10.3390/molecules27227662 - 8 Nov 2022

Cited by 10 | Viewed by 2359

Abstract

This work analyzes the catalytic effects induced by alkali and alkaline earth metals (AAEMs) on pyrolysis kinetics. To this end, thermogravimetric analyses (TGA) were carried out with raw beech wood and samples impregnated with NaCl, KCl and MgCl₂ at four heating rates [...] Read more.

This work analyzes the catalytic effects induced by alkali and alkaline earth metals (AAEMs) on pyrolysis kinetics. To this end, thermogravimetric analyses (TGA) were carried out with raw beech wood and samples impregnated with NaCl, KCl and MgCl₂ at four heating rates (5, 10, 15 and 30 °C/min). Obtained results showed that AAEM compounds promote the decomposition of biomass by reducing the initial and peak pyrolysis temperatures. More specifically, the catalytic effect of the alkaline earth metal was shown to be stronger than that of alkali metals. To further interpret the obtained trends, a kinetic modeling of measured data was realized using two isoconversional methods (the Ozawa–Flynn–Wall (OFW) and Kissinger–Akahira–Sunose (KAS) models). With a view to identifying a suitable reaction model, model fitting and master plot methods were considered to be coupled with the isoconversional modeling approaches. The 3-D diffusion reaction model has been identified as being well suited to properly simulate the evolution of the conversion degree of each sample as a function of the temperature. Furthermore, the kinetic parameters derived from the present modeling work highlighted significant decreases of the activation energies when impregnating wood with AAEM chlorides, thus corroborating the existence of catalytic effects shifting the decomposition process to lower temperatures. A survey of the speculated pathways allowing to account for the impact of AAEMs on the thermal degradation of woody biomass is eventually proposed to better interpret the trends identified in this work. Full article

► Show Figures

Figure 1

24 pages, 1956 KiB

Open AccessArticle

Oak Biomass in the Form of Wood, Bark, Brushwood, Leaves and Acorns in the Production Process of Multifunctional Biochar

by Bogdan Saletnik, Aneta Saletnik, Grzegorz Zaguła, Marcin Bajcar and Czesław Puchalski

Molecules 2022, 27(21), 7191; https://doi.org/10.3390/molecules27217191 - 24 Oct 2022

Cited by 3 | Viewed by 2856

Abstract

Biochar from forest biomass and its remains has become an essential material for environmental engineering, and is used in the environment to restore or improve soil function and its fertility, where it changes the chemical, physical and biological processes. The article presents the [...] Read more.

Biochar from forest biomass and its remains has become an essential material for environmental engineering, and is used in the environment to restore or improve soil function and its fertility, where it changes the chemical, physical and biological processes. The article presents the research results on the opportunity to use the pyrolysis process to receive multifunctional biochar materials from oak biomass. It was found that biochars obtained from oak biomass at 450 and 500 °C for 10 min were rich in macronutrients. The greatest variety of the examined elements was characterized by oak-leaf pyrolysate, and high levels of Ca, Fe, K, Mg, P, S, Na were noticed. Pyrolysates from acorns were high in Fe, K, P and S. Oak bark biochars were rich in Ca, Fe, S and contained nitrogen. In addition, biomass pyrolysis has been found to improve energy parameters and does not increase the dust explosion hazard class. The oak biomass pyrolytic at 450 and 500 °C after 10 min increases its caloric content for all samples tested by at least 50%. The highest caloric value among the raw biomass tested was observed in oak bark: 19.93 MJ kg⁻¹ and oak branches: 19.23 MJ kg⁻¹. The mean and highest recorded K_st_max were 94.75 and 94.85 bar s⁻¹, respectively. It can be concluded that pyrolysis has the potential to add value to regionally available oak biomass. The results described in this work provide a basis for subsequent, detailed research to obtain desired knowledge about the selection of the composition, purpose, and safety rules of production, storage, transport and use of biochar materials. Full article

► Show Figures

Figure 1

14 pages, 2004 KiB

Open AccessReview

Increasing Sugar Content in Source for Biofuel Production Using Agrochemical and Genetic Approaches at the Stages of BioMass Preharvesting and Harvesting

by Darya Zolotareva, Alexey Zazybin, Yelizaveta Belyankova, Anuar Dauletbakov, Saniya Tursynbek, Khadichahan Rafikova, Assel Ten, Valentina Yu, Sarah Bayazit, Anna Basharimova and Murat Aydemir

Molecules 2022, 27(16), 5210; https://doi.org/10.3390/molecules27165210 - 16 Aug 2022

Cited by 3 | Viewed by 2096

Abstract

In order to optimize biofuel (including bioethanol) production processes, various problems need to be solved, such as increasing the sugar content of raw materials/biomass to gain a higher yield of the product. This task can be solved in several ways, with their own [...] Read more.

In order to optimize biofuel (including bioethanol) production processes, various problems need to be solved, such as increasing the sugar content of raw materials/biomass to gain a higher yield of the product. This task can be solved in several ways, with their own advantages and disadvantages, and an integrated approach, such as using a combination of ripening agents and phytohormones or application of a superabsorbent polymer with at least one sugar-enhancing agent, can be applied as well. Here, we reviewed several methods, including pre- and postharvest factors (light, temperature, partial replacement of potassium with magnesium, etc.), genetic modifications (traditional breeding, phytohormones, etc.), chemical ripening methods (Ethephon, Moddus, etc.), and some alternative methods (DMSO treatment, ionic liquids, etc.). The aim of this review was to provide a comprehensive, up-to-date summary of methods of increasing the carbohydrate level in plants/biomass for bioethanol production. Full article

► Show Figures

Figure 1

14 pages, 3483 KiB

Open AccessArticle

Co-Removal Effect and Mechanism of Cr(VI) and Cd(II) by Biochar-Supported Sulfide-Modified Nanoscale Zero-Valent Iron in a Binary System

by Rui Zhao, Xiufeng Cao, Tao Li, Xiaowei Cui and Zhaojie Cui

Molecules 2022, 27(15), 4742; https://doi.org/10.3390/molecules27154742 - 25 Jul 2022

Cited by 5 | Viewed by 2034

Abstract

This study aimed to explore the co-removal effect and mechanism of Cr(VI) and Cd(II) with an optimized synthetic material. The toxicity and accumulation characteristics of Cr(VI) and Cd(II) encountered in wastewater treatment areas present significant challenges. In this work, a rational assembly of [...] Read more.

This study aimed to explore the co-removal effect and mechanism of Cr(VI) and Cd(II) with an optimized synthetic material. The toxicity and accumulation characteristics of Cr(VI) and Cd(II) encountered in wastewater treatment areas present significant challenges. In this work, a rational assembly of sulfide-modified nanoscale zero-valent iron (SnZVI) was introduced into a biochar (BC), and a Cr(VI)–Cd(II) binary system adsorbent with high efficiency was synthesized. When the preparation temperature of the BC was 600 °C, the molar ratio of S/Fe was 0.3, the mass ratio of BC/SnZVI was 1, and the best adsorption capacities of BC-SnZVI for Cr(VI) and Cd(II) in the binary system were 58.87 mg/g and 32.55 mg/g, respectively. In addition, the adsorption mechanism of BC-SnZVI on the Cr(VI)-Cd(II) binary system was revealed in depth by co-removal experiments, indicating that the coexistence of Cd(II) could promote the removal of Cr(VI) by 9.20%, while the coexistence of Cr(VI) could inhibit the removal of Cd(II) by 43.47%. This work provides a new pathway for the adsorption of Cr(VI) and Cd(II) in binary systems, suggesting that BC-SnZVI shows great potential for the co-removal of Cr(VI) and Cd(II) in wastewater. Full article

► Show Figures

Figure 1

Journal Menu

Journal Browser

Recycling of Biomass Resources: Biofuels and Biochemicals

Share This Topical Collection

Editors

Topical Collection Information

Keywords

Published Papers (17 papers)

2024

Jump to: 2023, 2022

2023

Jump to: 2024, 2022

2022

Jump to: 2024, 2023

Further Information

Guidelines

MDPI Initiatives

Follow MDPI