Next Issue
Volume 10, March
Previous Issue
Volume 10, January
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
3.9
2.2
Journals
Actuators
Volume 10
Issue 2
share announcement

Actuators, Volume 10, Issue 2 (February 2021) – 21 articles

Cover Story (view full-size image): Extensile fluidic artificial muscles (EFAMs) are potentially revolutionary large-stroke actuators for soft robots because EFAMs can generate substantial axial force and can double in length when inflated. EFAM performance. EFAMs were manufactured in-house and consisted of a Kevlar braid for high strength, a latex bladder for achieving large strains, and swaged aluminum end-fittings designed to achieve airtightness at relatively large internal pressures. To collect force response data, EFAM force and stroke were measured while cycling over a range of inflation pressure. Three hyper-elastic constitutive relationships were formulated and analyzed to better understand the contributions of bladder stretch to EFAM performance. The hyperelastic bladder analysis also provides additional physical insights into EFAM performance and reduces error when predicting EFAM performance. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
12 pages, 4912 KiB  
Article
Investigation on a Linear Piezoelectric Actuator Based on Stick-Slip/Scan Excitation
by Yunlai Shi, Chengshu Lou and Jun Zhang
Actuators 2021, 10(2), 39; https://doi.org/10.3390/act10020039 - 20 Feb 2021
Cited by 17 | Viewed by 4784
Abstract
To perform a high resolution and long stroke application in optical precision instruments, a linear piezoelectric actuator operated in stick-slip/scan modes for driving a linear motion table is presented. The proposed piezoelectric actuator is a piezoelectric composite structure, which includes a metal elastomer, [...] Read more.
To perform a high resolution and long stroke application in optical precision instruments, a linear piezoelectric actuator operated in stick-slip/scan modes for driving a linear motion table is presented. The proposed piezoelectric actuator is a piezoelectric composite structure, which includes a metal elastomer, a piezoelectric stack, and a frictional ball. The purpose of this paper is to describe the operation principle, design, and the running test and resolution test of the linear motion table driven by the proposed piezoelectric actuator. The notable feature is the flexible hinges of the actuator, including composite hinge, pre-pressure adjustment flexible hinge, and transmission flexible hinge, which are designed for decoupling the motion in the action direction of the piezoelectric stack and the direction in which the pre-pressure is applied. A prototype has been fabricated and two operation modes of the piezoelectric actuator, stick-slip and scan mode, were utilized to test the driving characteristics of the linear motion table. Experimental results show that the finest step resolutions in stick-slip mode and scan mode achieved 12 nm and 4 nm, respectively. Full article
(This article belongs to the Section Precision Actuators)
►▼ Show Figures

Figure 1

20 pages, 46135 KiB  
Article
Implementation of the Biological Muscle Mechanism in HASEL Actuators to Leverage Electrohydraulic Principles and Create New Geometries
by Levi Tynan, Ganesh Naik, Gaetano D. Gargiulo and Upul Gunawardana
Actuators 2021, 10(2), 38; https://doi.org/10.3390/act10020038 - 19 Feb 2021
Cited by 5 | Viewed by 5879
Abstract
Biomimicry is a field of research that uses the functional and structural components of nature, at macroscopic and microscopic scales, to inspire solutions to problems in our industrial world. Soft robotics is an area of research that uses biomimicry, in this case, mimicking [...] Read more.
Biomimicry is a field of research that uses the functional and structural components of nature, at macroscopic and microscopic scales, to inspire solutions to problems in our industrial world. Soft robotics is an area of research that uses biomimicry, in this case, mimicking skeletal muscles (referred to in this field as “muscle-mimicking actuators”, to perform task of high difficulty, that can be operated in a harmlessly in different environments. One of the most recent advancements to develop from this field is the “Hydraulically amplified self-healing electrostatics (HASEL) actuator”. However, this method also brings many of the issues associated with the geometry of its design, especially with respect to the efficiency of the system. Though this system mimics the functionality of the skeletal muscle, there is room to adjust the existing electrostatic mechanisms, that distribute the locally produced force, to mimic the structure of the mechanism that distributes the force to the skeletal muscular, which is also locally produced. In this paper, we show that the current electrostatic parallel electrodes, as well as the zipping mechanisms, can be replaced with the sliding mechanism. This eliminates issues associated with compartmentalizing of the primary electrostatic force and the secondary hydraulic forces leading to a more efficient and controlled transmission electrostatic and hydrostatic forces to the load compared to current iterations and their geometric components. Full article
(This article belongs to the Special Issue Soft Actuators for Artificial Muscles)
►▼ Show Figures

Figure 1

23 pages, 8468 KiB  
Article
Characterisation and Control of a Woven Biomimetic Actuator for Wearable Neurorehabilitative Devices
by Vaughan Murphy, Brandon P. R. Edmonds and Ana Luisa Trejos
Actuators 2021, 10(2), 37; https://doi.org/10.3390/act10020037 - 19 Feb 2021
Cited by 4 | Viewed by 4140
Abstract
Twisted coiled actuators (TCAs) are a type of soft actuator made from polymer fibres such as nylon sewing thread. As they provide motion in a compact, lightweight, and flexible package, they provide a solution to the actuation of wearable mechatronic devices for motion [...] Read more.
Twisted coiled actuators (TCAs) are a type of soft actuator made from polymer fibres such as nylon sewing thread. As they provide motion in a compact, lightweight, and flexible package, they provide a solution to the actuation of wearable mechatronic devices for motion assistance. Their limitation is that they provide low total force, requiring them to actuate in parallel with multiple units. Previous literature has shown that the force and stroke production can be improved by incorporating them into fabric meshes. A fabric mesh could also improve the contraction efficiency, strain rate, and user comfort. Therefore, this study focused on measuring these performance metrics for a set of TCAs embedded into a woven fabric mesh. The experimental results show that the stroke of the actuators scaled linearly with the number of activated TCAs, achieving a maximum applied force of 11.28 N, a maximum stroke of 12.23%, and an efficiency of 1.8%. Additionally, two control methods were developed and evaluated, resulting in low overshoot and steady-state error. These results indicate that the designed actuators are viable for use in wearable mechatronic devices, since they can scale to meet different requirements, while being able to be accurately controlled with minimal additional components. Full article
(This article belongs to the Special Issue Feature Papers to Celebrate the SCIE Coverage)
►▼ Show Figures

Figure 1

11 pages, 2694 KiB  
Article
Piezoelectric MEMS Linear Motor for Nanopositioning Applications
by Víctor Ruiz-Díez, Jorge Hernando-García, Javier Toledo, Abdallah Ababneh, Helmut Seidel and José Luis Sánchez-Rojas
Actuators 2021, 10(2), 36; https://doi.org/10.3390/act10020036 - 18 Feb 2021
Cited by 15 | Viewed by 5416
Abstract
This paper reports the design, fabrication, and performance of piezoelectric bidirectional conveyors based on microelectromechanical systems (MEMS) and featuring 3D-printed legs in bridge resonators. The structures consisted of aluminum-nitride (AlN) piezoelectric film on top of millimeter-sized rectangular thin silicon bridges and two electrode [...] Read more.
This paper reports the design, fabrication, and performance of piezoelectric bidirectional conveyors based on microelectromechanical systems (MEMS) and featuring 3D-printed legs in bridge resonators. The structures consisted of aluminum-nitride (AlN) piezoelectric film on top of millimeter-sized rectangular thin silicon bridges and two electrode patches. The position and size of the patches were analytically optimized for travelling or standing wave generation, while the addition of 3D-printed legs allowed for a controlled contact and amplified displacement, a further step into the manufacturing of efficient linear motors. Such hybrid devices have recently demonstrated the conveyance of sliders of several times the motor weight, with speeds of 1.7 mm/s by travelling waves generated at 6 V and 19.3 kHz. In this paper both travelling and standing wave motors are compared. By the optimization of various aspects of the device such as the vibrational modes, leg collocation and excitation signals, speeds as high as 35 mm/s, and payloads above 10 times the motor weight were demonstrated. The devices exhibited a promising positional resolution while actuated with only a few sinusoidal cycles in an open-loop configuration. Discrete steps as low as 70 nm were measured in the conveyance of 2-mg sliders. Full article
(This article belongs to the Special Issue Selected Papers from the 1st International Electronic Conference on Actuator Technology: Materials, Devices and Applications (IeCAT))
►▼ Show Figures

Figure 1

12 pages, 1868 KiB  
Communication
Extended-State-Observer-Based Super Twisting Control for Pneumatic Muscle Actuators
by Yu Cao, Zhongzheng Fu, Mengshi Zhang and Jian Huang
Actuators 2021, 10(2), 35; https://doi.org/10.3390/act10020035 - 18 Feb 2021
Cited by 9 | Viewed by 2997
Abstract
This paper presents a tracking control method for pneumatic muscle actuators (PMAs). Considering that the PMA platform only feedbacks position, and the velocity and disturbances cannot be observed directly, we use the extended-state-observer (ESO) for simultaneously estimating the system states and disturbances by [...] Read more.
This paper presents a tracking control method for pneumatic muscle actuators (PMAs). Considering that the PMA platform only feedbacks position, and the velocity and disturbances cannot be observed directly, we use the extended-state-observer (ESO) for simultaneously estimating the system states and disturbances by using measurable variables. Integrated with the ESO, a super twisting controller (STC) is design based on estimated states to realize the high-precision tracking. According to the Lyapunov theorem, the stability of the closed-loop system is ensured. Simulation and experimental studies are conducted, and the results show the convergence of the ESO and the effectiveness of the proposed method. Full article
(This article belongs to the Special Issue Pneumatic, Hybrid Pneumatic–Electric, and Vacuum-Powered Actuators)
►▼ Show Figures

Figure 1

30 pages, 8354 KiB  
Article
Optimal Design and Performance Analysis of Radial MR Valve with Single Excitation Coil
by Guoliang Hu, Feng Zhou and Lifan Yu
Actuators 2021, 10(2), 34; https://doi.org/10.3390/act10020034 - 17 Feb 2021
Cited by 7 | Viewed by 2456
Abstract
The main issue addressed in this paper involves the magnetorheological (MR) valve increasing the pressure drop by changing the internal structure, which leads to the increase of dimension sizes and the easy blocking of the internal channel. Optimizing the design of the traditional [...] Read more.
The main issue addressed in this paper involves the magnetorheological (MR) valve increasing the pressure drop by changing the internal structure, which leads to the increase of dimension sizes and the easy blocking of the internal channel. Optimizing the design of the traditional radial MR valve without changing the internal structure and whole dimension size is indispensable. Firstly, a radial MR valve with single excitation coil was proposed. The mathematical models of the field-dependent pressure drop and viscosity pressure drop in fluid flow channels were deduced, and the calculation formula of pressure drop was also established. Then, ANSYS software was used to simulate and analyze the distributions of the magnetic flux lines and magnetic flux densities of the proposed radial MR valve. Subsequently, the radial MR valve was simulated and analyzed by using the ANSYS first-order and zero-order simulation tools. In addition, the experimental test bench of the proposed MR valve was setup, the static performance of pressure drop was tested, and the change of pressure drop of the optimal radial MR valve under different loads was studied, furthermore, the response time with current of the initial and optimal radial MR valve were also investigated. Finally, the dynamic performances of the optimal radial MR valve controlled cylinder system under different currents, frequencies and amplitudes were tested, respectively. The experimental results indicate that the total pressure drop of the initial valve is 1.842 MPa when the applied current is 1.8 A, and the total pressure drop of the optimal valve is 2.58 MPa, the increase is 40.07%. Meanwhile, the maximum damping force of the optimal radial MR valve controlled cylinder system can reach about 3.6 kN at the current of 1.25 A, which shows a better optimization effect of the optimal radial MR valve. Full article
(This article belongs to the Section Actuators for Land Transport)
►▼ Show Figures

Figure 1

17 pages, 1688 KiB  
Article
Control of an IPMC Soft Actuator Using Adaptive Full-Order Recursive Terminal Sliding Mode
by Romina Zarrabi Ekbatani, Ke Shao, Jasim Khawwaf, Hai Wang, Jinchuan Zheng, Xiaoqi Chen and Mostafa Nikzad
Actuators 2021, 10(2), 33; https://doi.org/10.3390/act10020033 - 16 Feb 2021
Cited by 5 | Viewed by 3320
Abstract
The ionic polymer metal composite (IPMC) actuator is a kind of soft actuator that can work for underwater applications. However, IPMC actuator control suffers from high nonlinearity due to the existence of inherent creep and hysteresis phenomena. Furthermore, for underwater applications, they are [...] Read more.
The ionic polymer metal composite (IPMC) actuator is a kind of soft actuator that can work for underwater applications. However, IPMC actuator control suffers from high nonlinearity due to the existence of inherent creep and hysteresis phenomena. Furthermore, for underwater applications, they are highly exposed to parametric uncertainties and external disturbances due to the inherent characteristics and working environment. Those factors significantly affect the positioning accuracy and reliability of IPMC actuators. Hence, feedback control techniques are vital in the control of IPMC actuators for suppressing the system uncertainty and external disturbance. In this paper, for the first time an adaptive full-order recursive terminal sliding-mode (AFORTSM) controller is proposed for the IPMC actuator to enhance the positioning accuracy and robustness against parametric uncertainties and external disturbances. The proposed controller incorporates an adaptive algorithm with terminal sliding mode method to release the need for any prerequisite bound of the disturbance. In addition, stability analysis proves that it can guarantee the tracking error to converge to zero in finite time in the presence of uncertainty and disturbance. Experiments are carried out on the IPMC actuator to verify the practical effectiveness of the AFORTSM controller in comparison with a conventional nonsingular terminal sliding mode (NTSM) controller in terms of smaller tracking error and faster disturbance rejection. Full article
(This article belongs to the Special Issue Feature Papers to Celebrate the SCIE Coverage)
►▼ Show Figures

Figure 1

22 pages, 10531 KiB  
Article
Novel Magnetic Circuit Topology of Linear Force Motor for High Energy Utilization of Permanent Magnet: Analytical Modelling and Experiment
by Bin Meng, Hao Xu, Bei Liu, Mingzhu Dai, Chenhang Zhu and Sheng Li
Actuators 2021, 10(2), 32; https://doi.org/10.3390/act10020032 - 14 Feb 2021
Cited by 13 | Viewed by 3286
Abstract
The magnetic circuit of existing linear force motors does not consider the issue of energy utilization of permanent magnets, and the structure is complicated. To achieve high energy utilization and simplify the structure, this paper presents a novel magnetic circuit topology for the [...] Read more.
The magnetic circuit of existing linear force motors does not consider the issue of energy utilization of permanent magnets, and the structure is complicated. To achieve high energy utilization and simplify the structure, this paper presents a novel magnetic circuit topology for the linear force motors of electro-hydraulic servo-proportional valves. In order to rapidly and accurately calculate the static characteristics of the force motor, an analytical model is established by using the equivalent magnetic circuit method. The model comprehensively considers the magnetic leakage effect, edge effect, and permeability nonlinearity. A prototype of the force motor is designed and manufactured, and a special experimental platform is built. The prototype force motor has a linear force-displacement characteristic and the output force increases with the increase of the excitation currents, which can reach about 41 N at 2 A. This indicates that it is suitable as an electro-mechanical converter for electro-hydraulic servo-proportional valves. Moreover, the analytical model is used to perform parameter optimization and calculate the magnetic flux density in the working air gap and the force-displacement characteristics under different excitation currents. The results are in good agreement with the electromagnetic field finite element simulation and experimental results. They indicate that the analytical model can rapidly and accurately predict the static characteristics of the force motor. The research work provides good reference means for the design of magnetic circuit topology with consideration of the high energy utilization of permanent magnets, and also the accurate analytical modeling of valve electro-mechanical converters. Full article
(This article belongs to the Section Aircraft Actuators)
►▼ Show Figures

Figure 1

15 pages, 3640 KiB  
Review
4D Textiles Made by Additive Manufacturing on Pre-Stressed Textiles—An Overview
by Hannah Carlotta Koch, David Schmelzeisen and Thomas Gries
Actuators 2021, 10(2), 31; https://doi.org/10.3390/act10020031 - 10 Feb 2021
Cited by 39 | Viewed by 6528
Abstract
Four-dimensional textiles are textiles that can change shape or function over time by the influence of a stimulus, mainly force and heat. In this review, the focus is on 4D textiles made by additive manufacturing which is built on the concept of 4D [...] Read more.
Four-dimensional textiles are textiles that can change shape or function over time by the influence of a stimulus, mainly force and heat. In this review, the focus is on 4D textiles made by additive manufacturing which is built on the concept of 4D printing. A literature survey in Web of Science and Scopus was carried out, which resulted in 29 contributions on additive manufacturing on pre-stressed textiles. In this paper, an overview of materials, production technologies and testing methods is given. The concepts of form giving and shape change transferred to 4D textiles are classified. The influencing factors on the properties of the material structure are presented. The main focus of the literature lies in defining process and material properties for improving the adhesion. Only limited research has been conducted on simulating the material behavior. Ideas for applications exist but no research has been conducted on real applications. Therefore, the challenges are identified, and future research directions are derived. Full article
(This article belongs to the Special Issue Shape Memory Polymer Actuators)
►▼ Show Figures

Figure 1

10 pages, 3055 KiB  
Communication
Sensuator: A Hybrid Sensor–Actuator Approach to Soft Robotic Proprioception Using Recurrent Neural Networks
by Pornthep Preechayasomboon and Eric Rombokas
Actuators 2021, 10(2), 30; https://doi.org/10.3390/act10020030 - 7 Feb 2021
Cited by 15 | Viewed by 5639
Abstract
Soft robotic actuators are now being used in practical applications; however, they are often limited to open-loop control that relies on the inherent compliance of the actuator. Achieving human-like manipulation and grasping with soft robotic actuators requires at least some form of sensing, [...] Read more.
Soft robotic actuators are now being used in practical applications; however, they are often limited to open-loop control that relies on the inherent compliance of the actuator. Achieving human-like manipulation and grasping with soft robotic actuators requires at least some form of sensing, which often comes at the cost of complex fabrication and purposefully built sensor structures. In this paper, we utilize the actuating fluid itself as a sensing medium to achieve high-fidelity proprioception in a soft actuator. As our sensors are somewhat unstructured, their readings are difficult to interpret using linear models. We therefore present a proof of concept of a method for deriving the pose of the soft actuator using recurrent neural networks. We present the experimental setup and our learned state estimator to show that our method is viable for achieving proprioception and is also robust to common sensor failures. Full article
(This article belongs to the Special Issue Smart and Soft Self-Sensing Actuators)
►▼ Show Figures

Figure 1

23 pages, 9345 KiB  
Article
Design, Modeling, and Control of a Single Leg for a Legged-Wheeled Locomotion System with Non-Rigid Joint
by Vítor H. Pinto, José Gonçalves and Paulo Costa
Actuators 2021, 10(2), 29; https://doi.org/10.3390/act10020029 - 3 Feb 2021
Cited by 6 | Viewed by 3208
Abstract
This article presents an innovative legged-wheeled system, designed to be applied in a hybrid robotic vehicle’s locomotion system, as its driving member. The proposed system will be capable to combine the advantages of legged and wheeled locomotion systems, having 3DOF connected through a [...] Read more.
This article presents an innovative legged-wheeled system, designed to be applied in a hybrid robotic vehicle’s locomotion system, as its driving member. The proposed system will be capable to combine the advantages of legged and wheeled locomotion systems, having 3DOF connected through a combination of both rigid and non-rigid joints. This configuration provides the vehicle the ability to absorb impacts and selected external disturbances. A state space approach was adopted to control the joints, increasing the system’s stability and adaptability. Throughout this article, the entire design process of this robotic system will be presented, as well as its modeling and control. The proposed system’s design is biologically inspired, having as reference the human leg, resulting in the development of a prototype. The results of the testing process with the proposed prototype are also presented. This system was designed to be modular, low-cost, and to increase the autonomy of typical autonomous legged-wheeled locomotion systems. Full article
(This article belongs to the Special Issue Variable Stiffness Actuators)
►▼ Show Figures

Figure 1

18 pages, 22982 KiB  
Article
Towards End-to-End Deep Learning Performance Analysis of Electric Motors
by Nikita Gabdullin, Sadjad Madanzadeh and Alexey Vilkin
Actuators 2021, 10(2), 28; https://doi.org/10.3390/act10020028 - 3 Feb 2021
Cited by 8 | Viewed by 3350
Abstract
Convolutional Neural Networks (CNNs) and Deep Learning (DL) revolutionized numerous research fields including robotics, natural language processing, self-driving cars, healthcare, and others. However, DL is still relatively under-researched in physics and engineering. Recent works on DL-assisted analysis showed enormous potential of CNN applications [...] Read more.
Convolutional Neural Networks (CNNs) and Deep Learning (DL) revolutionized numerous research fields including robotics, natural language processing, self-driving cars, healthcare, and others. However, DL is still relatively under-researched in physics and engineering. Recent works on DL-assisted analysis showed enormous potential of CNN applications in electrical engineering. This paper explores the possibility of developing an end-to-end DL analysis method to match or even surpass conventional analysis techniques such as finite element analysis (FEA) based on the ability of CNNs to predict the performance characteristics of electric machines. The required depth in CNN architecture is studied by comparing a simplistic CNN with three ResNet architectures. Studied CNNs show over 90% accuracy for an analysis conducted under a minute, whereas a FEA of comparable accuracy required 200 h. It is also shown that training CNNs to predict multidimensional outputs can improve CNN performance. Multidimensional output prediction with data-driven methods is further discussed in context of multiphysics analysis showing potential for developing analysis methods that might surpass FEA capabilities. Full article
(This article belongs to the Section Actuators for Land Transport)
►▼ Show Figures

Figure 1

17 pages, 3576 KiB  
Article
Improved Control Scheduling Based on Learning to Prediction Mechanism for Efficient Machine Maintenance in Smart Factory
by Sehrish Malik and DoHyeun Kim
Actuators 2021, 10(2), 27; https://doi.org/10.3390/act10020027 - 31 Jan 2021
Cited by 5 | Viewed by 3021
Abstract
The prediction mechanism is very crucial in a smart factory as they widely help in improving the product quality and customer’s experience based on learnings from past trends. The implementation of analytics tools to predict the production and consumer patterns plays a vital [...] Read more.
The prediction mechanism is very crucial in a smart factory as they widely help in improving the product quality and customer’s experience based on learnings from past trends. The implementation of analytics tools to predict the production and consumer patterns plays a vital rule. In this paper, we put our efforts to find integrated solutions for smart factory concerns by proposing an efficient task management mechanism based on learning to scheduling in a smart factory. The learning to prediction mechanism aims to predict the machine utilization for machines involved in the smart factory, in order to efficiently use the machine resources. The prediction algorithm used is artificial neural network (ANN) and the learning to prediction algorithm used is particle swarm optimization (PSO). The proposed task management mechanism is evaluated based on multiple scenario simulations and performance analysis. The comparisons analysis shows that proposed task management system significantly improves the machine utilization rate and drastically drops the tasks instances missing rate and tasks starvation rate. Full article
(This article belongs to the Special Issue Sensing and Actuating Tasks in IoT Environments)
►▼ Show Figures

Figure 1

25 pages, 3066 KiB  
Article
Characterization and Analysis of Extensile Fluidic Artificial Muscles
by Jacek Garbulinski, Sai C. Balasankula and Norman M. Wereley
Actuators 2021, 10(2), 26; https://doi.org/10.3390/act10020026 - 30 Jan 2021
Cited by 12 | Viewed by 5663
Abstract
Extensile fluidic artificial muscles (EFAMs) are soft actuators known for their large ranges of extension, low weight, and blocked forces comparable to those of pneumatic cylinders. EFAMs have yet to be studied in a way that thoroughly focuses on their manufacturing, experimental characterization, [...] Read more.
Extensile fluidic artificial muscles (EFAMs) are soft actuators known for their large ranges of extension, low weight, and blocked forces comparable to those of pneumatic cylinders. EFAMs have yet to be studied in a way that thoroughly focuses on their manufacturing, experimental characterization, and modeling. A fabrication method was developed for production of two EFAMs. The quasi-static axial force response of EFAMs to varying displacement was measured by testing two specimens under isobaric conditions over a pressure range of 103.4–517.1 kPa (15–75 psi) with 103.4 kPa (15 psi) increments. The muscles were characterized by a blocked force of 280 N and a maximum stroke of 98% at 517.1 kPa (75 psi). A force-balance model was used to analyze EFAM response. Prior work employing the force-balance approach used hyper-elastic constitutive models based on polynomial expressions. In this study, these models are validated for EFAMs, and new constitutive models are proposed that better represent the measured stress values of rubber as a function of strain. These constitutive models are compared in terms of accuracy when estimating pressure-dependent stress–strain relationships of the bladder material. The analysis demonstrates that the new hyper-elastic stress models have an error 5% smaller than models previously employed for EFAMs for the same number of coefficients. Finally, the analysis suggests that the new stress functions have smaller errors than the polynomial stress model with the same number of coefficients, guarantee material stability, and are more conservative about the stress values for strains outside of the testing range. Full article
(This article belongs to the Special Issue Pneumatic Soft Actuators)
►▼ Show Figures

Figure 1

19 pages, 1526 KiB  
Article
On the Optimization of a Multimodal Electromagnetic Vibration Energy Harvester Using Mode Localization and Nonlinear Dynamics
by Kaouthar Aouali, Najib Kacem, Noureddine Bouhaddi and Mohamed Haddar
Actuators 2021, 10(2), 25; https://doi.org/10.3390/act10020025 - 30 Jan 2021
Cited by 6 | Viewed by 2700
Abstract
In this paper we study a generic model of a nonlinear quasiperiodic vibration energy harvester (VEH) based on electromagnetic transduction. The proposed device consists of multiple moving magnets guided by elastic beams and coupled by repulsive magnetic forces. A system of two degrees-of-freedom [...] Read more.
In this paper we study a generic model of a nonlinear quasiperiodic vibration energy harvester (VEH) based on electromagnetic transduction. The proposed device consists of multiple moving magnets guided by elastic beams and coupled by repulsive magnetic forces. A system of two degrees-of-freedom (DOFs) with tunable nonlinearity and mode localization is experimentally validated. The validated 2-DOFs harvester is optimized using a multiobjective optimization procedure to improve its harvested power and frequency bandwidth. An efficient criterion using the modal kinetic energy of the finite element model is proposed to quantify the energy localized in the structure perturbed zones. Afterward, this concept has been generalized to a 5-DOFs VEH with two perturbed DOFs oscillators and the optimal performances are derived using a multiobjective optimization. This proposed model enables a significant increase in the harvested power and frequency bandwidth by 101% and 79%, respectively, compared to that of the 2-DOFs device. Moreover, it has been shown that harvesting energy from two perturbed magnets among five provides almost the same amount of harvested energy and enhances the frequency bandwidth by 18% compared to those of the periodic system. Consequently, the harvester can be improved by reducing the transduction circuits number and the manufacturing cost. Full article
►▼ Show Figures

Figure 1

19 pages, 7595 KiB  
Article
Actuator Fault Tolerant Control of Variable Cycle Engine Using Sliding Mode Control Scheme
by Yuan Yuan, Tianhong Zhang, Zhonglin Lin, Zhiwen Zhao and Xinglong Zhang
Actuators 2021, 10(2), 24; https://doi.org/10.3390/act10020024 - 27 Jan 2021
Cited by 4 | Viewed by 3096
Abstract
This paper presents a fault tolerant control (FTC) design for the actuator faults in a variable cycle engine (VCE). Ensured by the multiple variable geometries structure of VCE, the design is realized by distributing the control effort among the unfaulty actuators with the [...] Read more.
This paper presents a fault tolerant control (FTC) design for the actuator faults in a variable cycle engine (VCE). Ensured by the multiple variable geometries structure of VCE, the design is realized by distributing the control effort among the unfaulty actuators with the “functional redundancy” idea. The FTC design consists of two parts: the fault reconstruction part and the fault tolerant control part, which use a sliding mode observer (SMO) and a sliding mode control (SMC) scheme respectively. Considering the inaccuracy of the fault reconstruction result, the proposed design requires only inaccurate fault information. The stability of the closed-loop control system is proved and the existence condition for the proposed control law is analyzed. This work also reveals its relation to the sliding mode control allocation design and the adaptive SMC design. An application case is then studied for tolerating the loss of effectiveness fault of the nozzle area actuator. Results show that the FTC design is able to tolerate the fault and achieves the same control goal as in the fault-free situation. Finally, a hardware-in-the-loop test is carried out to verify the design in a real-time distributed control system, which demonstrates its use from the engineering perspective. Full article
(This article belongs to the Section Aircraft Actuators)
►▼ Show Figures

Figure 1

17 pages, 4812 KiB  
Article
Torque Characteristics Analysis of a Magnetorheological Brake with Double Brake Disc
by Guoliang Hu, Lifan Wu and Linsen Li
Actuators 2021, 10(2), 23; https://doi.org/10.3390/act10020023 - 27 Jan 2021
Cited by 31 | Viewed by 4796
Abstract
Magnetorheological (MR) brake is a sort of electromagnetic brake that uses the controllable output characteristics of MR fluid for braking. In this paper, an MR brake with a double brake disc was developed to improve the braking performance of conventional MR brakes. The [...] Read more.
Magnetorheological (MR) brake is a sort of electromagnetic brake that uses the controllable output characteristics of MR fluid for braking. In this paper, an MR brake with a double brake disc was developed to improve the braking performance of conventional MR brakes. The effective damping gaps were increased from the traditional two sections to four sections by increasing the single brake disc of the conventional MR brake to a double brake disc. By reasonably arranging the non-magnetic sleeve inside the MR brake, the magnetic flux lines were better guided to the effective damping gaps, which increased the utilization rate of the magnetic field, effectively enhanced the braking performance, and also reduced the braking power consumption. The structure and working principle of the MR brake with double brake disc were discussed. The magnetic field of the proposed MR brake was analyzed by ANSYS software, and the theoretical result of braking performance was obtained by combining the established mechanical model. The braking performance test rig was setup to investigate the torque performance of the MR brake. The experimental results show that the maximum braking torque is 18.01 N·m at the applied current of 2.0 A and the rotational speed of 400 r·min−1, and the simulation values are basically verified. In addition, the results indicate that the constant torque characteristic of the MR brake is relatively stable, and the torque is almost unaffected by the changes of rotational speed. The results can provide some guidance for the structural design and optimization of the MR actuators. Full article
(This article belongs to the Section Actuators for Land Transport)
►▼ Show Figures

Figure 1

23 pages, 622 KiB  
Article
Modern Semi-Active Control Schemes for a Suspension with MR Actuator for Vibration Attenuation
by Kevin Herubiel Floreán-Aquino, Manuel Arias-Montiel, Jesús Linares-Flores, José Gabriel Mendoza-Larios and Álvaro Cabrera-Amado
Actuators 2021, 10(2), 22; https://doi.org/10.3390/act10020022 - 27 Jan 2021
Cited by 17 | Viewed by 3749
Abstract
This article describes semi-active modern control schemes for a quarter-vehicle suspension with a magnetorheological damper (MRD) to attenuate vibrations and simultaneously improve the passenger comfort and the vehicle road-holding. The first solution is a multiple positive position feedback (MPPF) control scheme to attenuate [...] Read more.
This article describes semi-active modern control schemes for a quarter-vehicle suspension with a magnetorheological damper (MRD) to attenuate vibrations and simultaneously improve the passenger comfort and the vehicle road-holding. The first solution is a multiple positive position feedback (MPPF) control scheme to attenuate the vibration amplitude at the two modal frequencies. The second solution is based on elementary passivity considerations on the exact regulation error dynamics passive output. The passive output feedback is used to improve the control aims. Finally, the third solution deals with a disturbance rejection control (DRC) based on an extended state observer. The three proposed control schemes consider an inverse polynomial model of a commercial MRD for numerical implementation and are evaluated by comfort and road-holding performance indexes proposed in the literature. Furthermore, the effects of variation in the sprung mass (emulating different number of passengers) on the controllers’ performance is analysed. The numerical results show in both scenarios (constant and variable sprung mass) that passivity based control (PBC) and DRC improve the performance indexes compared with the classical sky-hook control and the open-loop systems with a different constant current input for the MRD. Obtained results for damping force and power consumption are within the operation range of the considered commercial MRD showing the viability for experimental implementation of the proposed control schemes. Full article
(This article belongs to the Special Issue Actuators for System Identification, Vibration Analysis, and Control)
►▼ Show Figures

Figure 1

12 pages, 8895 KiB  
Article
Analysis of the Nonlinear Response of Piezo-Micromirrors with the Harmonic Balance Method
by Andrea Opreni, Nicolò Boni, Roberto Carminati and Attilio Frangi
Actuators 2021, 10(2), 21; https://doi.org/10.3390/act10020021 - 25 Jan 2021
Cited by 30 | Viewed by 5430
Abstract
In this work, we address the simulation and testing of MEMS micromirrors with hardening and softening behaviour excited with patches of piezoelectric materials. The forces exerted by the piezoelectric patches are modelled by means of the theory of ferroelectrics developed by Landau–Devonshire and [...] Read more.
In this work, we address the simulation and testing of MEMS micromirrors with hardening and softening behaviour excited with patches of piezoelectric materials. The forces exerted by the piezoelectric patches are modelled by means of the theory of ferroelectrics developed by Landau–Devonshire and are based on the experimentally measured polarisation hysteresis loops. The large rotations experienced by the mirrors also induce geometrical nonlinearities in the formulation up to cubic order. The solution of the proposed model is performed by discretising the device geometry using the Finite Element Method, and the resulting large system of coupled differential equations is solved by means of the Harmonic Balance Method. Numerical results were validated with experimental data collected on the devices. Full article
(This article belongs to the Special Issue Feature Papers to Celebrate the SCIE Coverage)
►▼ Show Figures

Figure 1

23 pages, 4289 KiB  
Article
Active Disturbance Rejection Control for Position Tracking of Electro-Hydraulic Servo Systems under Modeling Uncertainty and External Load
by Manh Hung Nguyen, Hoang Vu Dao and Kyoung Kwan Ahn
Actuators 2021, 10(2), 20; https://doi.org/10.3390/act10020020 - 22 Jan 2021
Cited by 32 | Viewed by 5325
Abstract
In this paper, an active disturbance rejection control is designed to improve the position tracking performance of an electro-hydraulic actuation system in the presence of parametric uncertainties, non-parametric uncertainties, and external disturbances as well. The disturbance observers (Dos) are proposed to estimate not [...] Read more.
In this paper, an active disturbance rejection control is designed to improve the position tracking performance of an electro-hydraulic actuation system in the presence of parametric uncertainties, non-parametric uncertainties, and external disturbances as well. The disturbance observers (Dos) are proposed to estimate not only the matched lumped uncertainties but also mismatched disturbance. Without the velocity measurement, the unmeasurable angular velocity is robustly calculated based on the high-order Levant’s exact differentiator. These disturbances and angular velocity are integrated into the control design system based on the backstepping framework which guarantees high-accuracy tracking performance. The system stability analysis is analyzed by using the Lyapunov theory. Simulations based on an electro-hydraulic rotary actuator are conducted to verify the effectiveness of the proposed control method. Full article
(This article belongs to the Special Issue Advanced Fluid Power Systems and Actuators)
►▼ Show Figures

Figure 1

5 pages, 178 KiB  
Editorial
Acknowledgment to Reviewers of Actuators in 2020
by Actuators Editorial Office
Actuators 2021, 10(2), 19; https://doi.org/10.3390/act10020019 - 20 Jan 2021
Viewed by 1960
Abstract
Peer review is the driving force of journal development, and reviewers are gatekeepers who ensure that Actuators maintains its standards for the high quality of its published papers [...] Full article
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-21
Previous Issue
Next Issue
Back to TopTop