Water

13 pages, 1974 KiB

Open AccessArticle

Comparative Analysis of the Disinfection Efficiency of Steel and Polymer Surfaces with Aqueous Solutions of Ozone and Sodium Hypochlorite

by Valentin Romanovski, Andrei Paspelau, Maksim Kamarou, Vitaly Likhavitski, Natalia Korob and Elena Romanovskaia

Water 2024, 16(5), 793; https://doi.org/10.3390/w16050793 - 6 Mar 2024

Cited by 3 | Viewed by 1741

Abstract

Disinfection of surfaces with various functional purposes is a relevant measure for the inactivation of microorganisms and viruses. This procedure is used almost universally, from water treatment facilities to medical institutions and public spaces. Some of the most common disinfectants the World Health [...] Read more.

Disinfection of surfaces with various functional purposes is a relevant measure for the inactivation of microorganisms and viruses. This procedure is used almost universally, from water treatment facilities to medical institutions and public spaces. Some of the most common disinfectants the World Health Organization recommends are chlorine-containing compounds. Sodium and calcium hypochlorites are only used for disinfection of the internal surfaces of water treatment facilities. However, it is known that ozone is a more powerful oxidizing agent. This study compares the effectiveness of inactivating yeast-like fungi Candida albicans, Gram-positive Bacillus subtilis, and Gram-negative bacteria Escherichia coli with aqueous ozone and sodium hypochlorite solutions. This study used ozone solutions in water with a concentration of 0.5–1.5 mg/L and sodium hypochlorite solutions with an active chlorine concentration of 50–150 mg/L. Steel and polymeric plates were used as substrates. Comparison of the CT (concentration by time) criterion at the ratio of LD50 in NaClO to ozonated water shows that the smallest difference, around 100 times, was observed in the inactivation of Candida albicans. The maximum difference is up to 230 times in the inactivation of Bacillus subtilis. Full article

(This article belongs to the Special Issue Water Treatment Technology for Emerging Contaminants)

► Show Figures

Figure 1

13 pages, 2655 KiB

Open AccessArticle

A Novel IoT-Based Performance Testing Method and System for Fire Pumps

by Shangcong Zhang, Yongfang Li, Xuefei Chen, Ruyi Zhou, Ziran Wu and Taha Zarhmouti

Water 2024, 16(5), 792; https://doi.org/10.3390/w16050792 - 6 Mar 2024

Viewed by 1620

Abstract

Fire pumps are the key components of water supply in a firefighting system. At present, there is a lack of fire water pump testing methods that intelligently detect faulty states. Existing testing approaches require manual operation, which leads to low efficiency and accuracy. [...] Read more.

Fire pumps are the key components of water supply in a firefighting system. At present, there is a lack of fire water pump testing methods that intelligently detect faulty states. Existing testing approaches require manual operation, which leads to low efficiency and accuracy. To solve the issue, this paper presents an automatic and smart testing approach that acquires measurements of the flow, pressure, shaft power and efficiency from smart sensors via an IoT network, so that performance curves are obtained in the testing processes. An IoT platform is developed for data conversion, transmission and storage. The Discrete Fréchet Distance is applied to evaluate the similarities between the acquired performance curves and metric performance curves, to determine the working condition of the fire pump. The weights of the measurement dimensions for distance computation are optimized by the Genetic Algorithm to improve the distinction between normal and faulty performance curves. Finally, the experimental results show that the proposed method can completely detect faulty states and prove its high practicality for real firefighting systems. Full article

(This article belongs to the Special Issue Water Supply System Reliability, Safety and Risk Modelling & Assessment, Volume II)

► Show Figures

Figure 1

17 pages, 5245 KiB

Open AccessArticle

Multiscale Spatiotemporal Dynamics of Drought within the Yellow River Basin (YRB): An Examination of Regional Variability and Trends

by Lei Jin, Shaodan Chen and Mengfan Liu

Water 2024, 16(5), 791; https://doi.org/10.3390/w16050791 - 6 Mar 2024

Cited by 2 | Viewed by 1410

Abstract

Drought, as a recurring extreme climatic event, inflicts diverse impacts on ecological systems, agricultural productivity, water resources, and socio-economic progress globally. Discerning the drought patterns within the evolving environmental landscape of the Yellow River Basin (YRB) is imperative for enhancing regional drought management [...] Read more.

Drought, as a recurring extreme climatic event, inflicts diverse impacts on ecological systems, agricultural productivity, water resources, and socio-economic progress globally. Discerning the drought patterns within the evolving environmental landscape of the Yellow River Basin (YRB) is imperative for enhancing regional drought management and fostering ecological conservation alongside high-quality development. This study utilizes meteorological drought indices, the Standardized Precipitation Evapotranspiration Index (SPEI) and the self-calibrating Palmer Drought Severity Index (scPDSI), for a detailed spatiotemporal analysis of drought conditions. It examines the effectiveness of these indices in the basin’s drought monitoring, offering a comprehensive insight into the area’s drought spatiotemporal dynamics. The findings demonstrate the following: (1) SPEI values exhibit distinct fluctuation patterns at varying temporal scales, with more pronounced fluctuations at shorter scales. Drought years identified via the 12-month SPEI time scale include 1965, 1966, 1969, 1972, 1986, 1997, 1999, 2001, and 2006. (2) A modified Mann–Kendall (MMK) trend test analysis of the scPDSI time series reveals a worrying trend of intensifying drought conditions within the basin. (3) Correlation analysis between SPEI and scPDSI across different time scales yields correlation coefficients of 0.35, 0.54, 0.69, 0.76, and 0.62, highlighting the most substantial correlation at an annual scale. Spatial correlation analysis conducted between SPEI and scPDSI across various scales reveals that, within diverse temporal ranges, the correlation peaks at a 12-month time scale, with subsequent prominence observed at 6 and 24 months. This observed pattern accentuates the applicability of scPDSI in the monitoring of medium- to long-term drought phenomena. Full article

(This article belongs to the Special Issue Impacts of Climate Change on Water Resources and Water Risks, the 2nd Edition)

► Show Figures

Figure 1

15 pages, 891 KiB

Open AccessArticle

Evaluating the Effectiveness of the “River Chief System”: An Empirical Study Based on the Water Quality Data of Coastal Rivers in Guangdong Province

by Kun Yang, Jinrui Yao, Yin Huang, Huiyan Ling, Yu Yang, Lin Zhang, Diyun Chen and Yuxian Liu

Water 2024, 16(5), 790; https://doi.org/10.3390/w16050790 - 6 Mar 2024

Cited by 1 | Viewed by 1492

Abstract

The river chief system (RCS) is an innovative reform in China for strengthening the management of rivers and lakes. It is an important means of curbing the current severe water-environment situation. However, the policy impact of the RCS is still inconclusive in the [...] Read more.

The river chief system (RCS) is an innovative reform in China for strengthening the management of rivers and lakes. It is an important means of curbing the current severe water-environment situation. However, the policy impact of the RCS is still inconclusive in the existing literature. Using monthly data spanning from January 2015 to March 2022 from 25 water quality monitoring stations in rivers flowing into the sea across 13 prefecture-level cities in Guangdong Province, this study adopted regression discontinuity to evaluate the policy effects of the RCS on water quality. The results show that after the RCS’s full implementation in Guangdong Province, the concentrations of dissolved oxygen (DO) increased and water quality indicators, such as permanganate index (COD_Mn), biochemical oxygen demand (BOD), ammonia nitrogen (NH₃-N), chemical oxygen demand (COD), and total phosphorus (TP), decreased; NH₃-N showed the largest decrease. These findings indicate that the RCS may contribute to a measurable improvement in reducing water pollution. However, no statistically significant changes in pH and total nitrogen (TN) were found, which indicates that the RCS fell short of achieving the policy effect of comprehensive water-pollution control. Therefore, in order to improve the RCS, it is necessary to refine the existing water-quality assessment indicators and to establish an evaluation system centered on the ecological health of rivers and lakes. Additionally, a paradigm shift from an administrative-boundary-based river management model to an overarching, holistic river-basin-based management approach is crucial for actualizing the holistic governance goals of the RCS. Full article

► Show Figures

Figure 1

16 pages, 5646 KiB

Open AccessArticle

Pressure Pulsation Characteristics on the Bulb Body of a Submersible Tubular Pump

by Jian Wang, Ze Chen, Linghao Li, Chuan Wang, Kangle Teng, Qiang He, Jiren Zhou, Shanshan Li, Weidong Cao, Xiuli Wang and Hongliang Wang

Water 2024, 16(5), 789; https://doi.org/10.3390/w16050789 - 6 Mar 2024

Viewed by 1005

Abstract

Submersible tubular pumps are an ideal choice for pump stations that require high flow rates and low lift. These pumps combine the unique features of submersible motors with axial flow pump technology, making them highly efficient and cost-effective. They have found extensive applications [...] Read more.

Submersible tubular pumps are an ideal choice for pump stations that require high flow rates and low lift. These pumps combine the unique features of submersible motors with axial flow pump technology, making them highly efficient and cost-effective. They have found extensive applications in China’s rapidly developing water conservancy industry. In this research, we focus on investigating the pressure pulsation characteristics of the internal bulb body in a specific pump station project in China. To conduct our analysis, we utilize a model of the submersible tubular pump and strategically position 18 monitoring points. These monitoring points cover various sections, including the impeller inlet and outlet, guide vane outlet, as well as the inlet, middle, and outlet sections of the bulb body segment. To calculate the unsteady flow of the system, we employ numerical simulation techniques. By combining the outcomes of model tests, we determine the pressure pulsation characteristics. The comparison of results reveals a remarkable similarity between the efficiency–head curves obtained from the numerical simulation and the model test. While the model test yields slightly higher head results, the numerical simulation indicates slightly higher efficiency values. This finding lends strong support to the reliability of numerical simulation results, which can provide valuable insights for the design and optimization of submersible tubular pumps. Overall, submersible tubular pumps demonstrate their suitability for pump stations with high flow rates and low lift requirements. The study of pressure pulsation characteristics within the bulb body contributes to a better understanding of their performance and facilitates their further application in the field of water conservancy engineering. Full article

(This article belongs to the Special Issue Hydraulics and Hydrodynamics in Fluid Machinery)

► Show Figures

Figure 1

27 pages, 7301 KiB

Open AccessArticle

Calibration of Hybrid-Maize Model for Simulation of Soil Moisture and Yield in Production Corn Fields

by Anthony A. Amori, Olufemi P. Abimbola, Trenton E. Franz, Daran Rudnick, Javed Iqbal and Haishun Yang

Water 2024, 16(5), 788; https://doi.org/10.3390/w16050788 - 6 Mar 2024

Viewed by 1540

Abstract

Model calibration is essential for acceptable model performance and applications. The Hybrid-Maize model, developed at the University of Nebraska-Lincoln, is a process-based crop simulation model that simulates maize growth as a function of crop and field management and environmental conditions. In this study, [...] Read more.

Model calibration is essential for acceptable model performance and applications. The Hybrid-Maize model, developed at the University of Nebraska-Lincoln, is a process-based crop simulation model that simulates maize growth as a function of crop and field management and environmental conditions. In this study, we calibrated and validated the Hybrid-Maize model using soil moisture and yield data from eight commercial production fields in two years. We used a new method for the calibration and multi-parameter optimization (MPO) based on kriging with modified criteria for selecting the parameter combinations. The soil moisture-related parameter combination (SM-PC3) improved simulations of soil water dynamics, but improvement in model performance is still required. The grain yield-related parameter combination significantly improved the yield simulation. We concluded that the calibrated model is good enough for irrigation water management at the field scale. Future studies should focus on improving the model performance in simulating total soil water (TSW) dynamics at different soil depths by including more soil water processes in a more dynamic manner. Full article

(This article belongs to the Section Soil and Water)

► Show Figures

Figure 1

18 pages, 6327 KiB

Open AccessArticle

Evaluating the Effectiveness of Rainwater Storage Tanks Based on Different Enabling Rules

by Yongwei Gong, Ge Meng, Kun Tian and Zhuolun Li

Water 2024, 16(5), 787; https://doi.org/10.3390/w16050787 - 6 Mar 2024

Viewed by 1168

Abstract

A proposed method for analyzing the effectiveness of rainwater storage tanks (RWSTs) based on various enabling rule scenarios has been proposed to address the issue of incomplete strategies and measures for controlling excessive rainwater runoff. Three enabling rules for RWSTs have been proposed, [...] Read more.

A proposed method for analyzing the effectiveness of rainwater storage tanks (RWSTs) based on various enabling rule scenarios has been proposed to address the issue of incomplete strategies and measures for controlling excessive rainwater runoff. Three enabling rules for RWSTs have been proposed, as follows: enabling rule I, which involves activation upon rainfall; enabling rule II, which requires the rainfall intensity to reach a predetermined threshold; and enabling rule III, which necessitates the cumulative rainfall to reach a set threshold. In order to assess the effectiveness of these enabling rules when reducing the total volume of rainwater outflow (TVRO), peak flow rate (PFR), and peak flow velocity (PFV), a comparative analysis was conducted to determine which enabling rule yielded the most optimal control effect. The findings indicate that the enabling rule I is responsible for determining the optimal unit catchment’s rainfall capture volume (UCRCV), which is measured at 300 m³·ha⁻¹. Additionally, the control effect of the TVRO of the RWSTs remains largely unaffected by the peak proportion coefficient. Enabling rule II establishes the optimal activation threshold at a rainfall intensity of 1 mm·min⁻¹; under this enabling rule, RWSTs demonstrate the most effective control over PFR and PFV. Enabling rule III enables the determination of the optimal activation threshold, which is set at a cumulative rainfall of 20 mm; under this enabling rule, the implementation of the RWST technique yields the most effective control over the TVRO. Consequently, the optimal rainwater runoff reduction plan for the study area has been successfully determined, providing valuable guidance for the implementation of scientific and reasonable optimal runoff management. Full article

(This article belongs to the Special Issue Urban Flooding Control and Sponge City Construction)

► Show Figures

Figure 1

15 pages, 20041 KiB

Open AccessArticle

Rainfall Runoff and Nitrogen Loss Characteristics on the Miyun Reservoir Slope

by Na Wang, Lei Wang, Liang Jin, Jiajun Wu, Min Pang, Dan Wei, Yan Li, Junqiang Wang, Ting Xu, Zhixin Yang and Jianzhi Xie

Water 2024, 16(5), 786; https://doi.org/10.3390/w16050786 - 6 Mar 2024

Cited by 1 | Viewed by 1154

Abstract

Rainfall intensity and slope gradient are the main drivers of slope surface runoff and nitrogen loss. To explore the distribution of rainfall runoff and nitrogen loss on the Miyun Reservoir slopes, we used artificial indoor simulated rainfall experiments to determine the distribution characteristics [...] Read more.

Rainfall intensity and slope gradient are the main drivers of slope surface runoff and nitrogen loss. To explore the distribution of rainfall runoff and nitrogen loss on the Miyun Reservoir slopes, we used artificial indoor simulated rainfall experiments to determine the distribution characteristics and nitrogen migration paths of surface and subsurface runoff under different rainfall intensities and slope gradients. The initial runoff generation time of subsurface runoff lagged that of surface runoff, and the lag time under different rainfall intensity and slope conditions ranges from 3.97 to 12.62 min. Surface runoff rate increased with increasing rainfall intensity and slope gradient; compared with a rainfall intensity of 40 mm/h, at a slope of 15°, average surface runoff rate at 60 and 80 mm/h increased by 2.38 and 3.60 times, respectively. Meanwhile, the subsurface runoff rate trended upwards with increasing rainfall intensity, in the order 5 > 15 > 10°. It initially increased and then decreased with increasing slope gradient, in the order 5 > 10 > 15°. Total nitrogen (TN) loss concentration of surface runoff shows a decrease followed by a stabilization trend; the concentration of TN loss decreases with decreasing rainfall intensity, and the stabilization time becomes earlier and is most obvious in 5° slope conditions. TN loss concentration in subsurface runoff decreased with increasing rainfall intensity, i.e., 40 > 60 > 80 mm/h. The surface runoff rainfall coefficient was mainly affected by rainfall intensity, a correlation between αs and slope gradients S was not obvious, and the fitting effect was poor. The subsurface runoff rainfall coefficient was mainly affected by slope gradient, the R² of all rainfall intensities was <0.60, and the fitting effect was poor. The main runoff loss pathway from the Miyun Reservoir slopes was surface runoff, which was more than 62.57%. At the same time, nitrogen loss was subsurface runoff, more than 51.14%. The proportion of surface runoff to total runoff increases with the increase of rainfall intensity and slope, with a minimum of 62.57%, and the proportion of nitrogen loss from subsurface runoff also decreases with increasing rainfall intensity but does not change with slope gradient. The order of different runoff modulus types was mixed runoff (surface and subsurface runoff occur simultaneously) > surface runoff > subsurface runoff. The surface and mixed runoff modulus increased significantly with increasing rain intensity under different rain intensities and slope gradients. Overall, rainfall intensity significantly affected slope surface runoff, and slope gradient significantly affected nitrogen loss. Full article

(This article belongs to the Special Issue Effects of Hydrology on Soil Erosion and Soil Conservation)

► Show Figures

Figure 1

19 pages, 5206 KiB

Open AccessArticle

Many-Objective Hierarchical Pre-Release Flood Operation Rule Considering Forecast Uncertainty

by Yongqi Liu, Guibing Hou, Baohua Wang, Yang Xu, Rui Tian, Tao Wang and Hui Qin

Water 2024, 16(5), 785; https://doi.org/10.3390/w16050785 - 6 Mar 2024

Cited by 1 | Viewed by 1097

Abstract

Flood control operation of cascade reservoirs is an important technology to reduce flood disasters and increase economic benefits. Flood forecast information can help reservoir managers make better use of flood resources and reduce flood risks. In this paper, a hierarchical pre-release flood operation [...] Read more.

Flood control operation of cascade reservoirs is an important technology to reduce flood disasters and increase economic benefits. Flood forecast information can help reservoir managers make better use of flood resources and reduce flood risks. In this paper, a hierarchical pre-release flood operation rule considering the flood forecast and its uncertainty information is proposed for real-time flood control. A many-objective optimization model considering the cascade reservoir’s power generation objective, flood control objective, and navigation objective is established. Then, a region search evolutionary algorithm is applied to optimize the many-objective optimization model in a real-world case study upstream of the Yangtze River basin. The optimization experimental results show that the region search evolutionary algorithm can balance convergence and diversity well, and the HV value is 40% higher than the MOEA/D algorithm. The simulation flood control results of cascade reservoirs upstream of the Yangtze River demonstrate that the optimized flood control rule can increase the average multi-year power generation of cascade reservoirs by a maximum of 27.72 × 10⁸ kWh under the condition of flood control safety. The rules proposed in this paper utilize flood resources by identifying runoff forecast information, and pre-release to the flood limit level 145 m before the big flood occurs, so as to ensure the safety downstream and the dam’s own flood control and provide reliable decision support for reservoir managers. Full article

► Show Figures

Figure 1

15 pages, 4135 KiB

Open AccessArticle

Nitrite Degradation by a Novel Marine Bacterial Strain Pseudomonas aeruginosa DM6: Characterization and Metabolic Pathway Analysis

by Zhe Chen, Wenying Yu, Yingjian Zhan, Zheng Chen, Tengda Han, Weiwei Song and Yueyue Zhou

Water 2024, 16(5), 784; https://doi.org/10.3390/w16050784 - 6 Mar 2024

Cited by 1 | Viewed by 1745

Abstract

High concentrations of nitrite in marine aquaculture wastewater not only pose a threat to the survival and immune systems of aquatic organisms but also contribute to eutrophication, thereby impacting the balance of coastal ecosystems. Compared to traditional physical and chemical methods, utilizing microorganism-mediated [...] Read more.

High concentrations of nitrite in marine aquaculture wastewater not only pose a threat to the survival and immune systems of aquatic organisms but also contribute to eutrophication, thereby impacting the balance of coastal ecosystems. Compared to traditional physical and chemical methods, utilizing microorganism-mediated biological denitrification is a cost-effective and efficient solution. However, the osmotic pressure changes and salt-induced enzyme precipitation in high-salinity seawater aquaculture environments may inhibit the growth and metabolism of freshwater bacterial strains, making it more suitable to select salt-tolerant marine microorganisms for treating nitrite in marine aquaculture wastewater. In this study, a salt-tolerant nitrite-degrading bacterium, designated as DM6, was isolated from the seawater (salinity of 25–30‰) of Portunus trituberculatus cultivation. The molecular identification of strain DM6 was conducted using 16S rRNA gene sequencing technology. The impacts of various environmental factors on the nitrite degradation performance of strain DM6 were investigated through single-factor and orthogonal experiments, with the selected conditions considered to be the key factors affecting the denitrification efficiency of microorganisms in actual wastewater treatment. PCR amplification of key genes involved in the nitrite metabolism pathway of strain DM6 was conducted, including denitrification pathway-related genes narG, narH, narI, nirS, and norB, as well as assimilation pathway-related genes nasC, nasD, nasE, glnA, gltB, gltD, gdhB, and gdhA. The findings indicated that strain DM6 is classified as Pseudomonas aeruginosa and exhibits efficient nitrite degradation even under a salinity of 35‰. The optimal nitrite degradation efficiency of DM6 was observed when using sodium citrate as the carbon source, a C/N ratio of 20, a salinity of 13‰, pH 8.0, and a temperature of 35 °C. Under these conditions, DM6 could completely degrade an initial nitrite concentration of 156.33 ± 1.17 mg/L within 36 h. Additionally, the successful amplification of key genes involved in the nitrite denitrification and assimilation pathways suggests that strain DM6 may possess both denitrification and assimilation pathways for nitrite degradation simultaneously. Compared to freshwater strains, strain DM6 demonstrates higher salt tolerance and exhibits strong nitrite degradation capability even at high concentrations. However, it may be more suitable for application in the treatment of wastewater from marine aquaculture systems during summer, high-temperature, or moderately alkaline conditions. Full article

(This article belongs to the Section Oceans and Coastal Zones)

► Show Figures

Figure 1

19 pages, 3744 KiB

Open AccessArticle

Simulating Aquifer for Nitrate Ion Migration Processes in Soil

by Oanamari Daniela Orbuleţ, Cristina Modrogan and Cristina-Ileana Covaliu-Mierla

Water 2024, 16(5), 783; https://doi.org/10.3390/w16050783 - 6 Mar 2024

Viewed by 1091

Abstract

The objective of this study was to explore the removal of nitrate ions from groundwater by employing dynamic permeable reactive barriers (PRBs) with A400-nZVI. This research aimed to determine the parameters of the barrier and evaluate its overall capacity to retain nitrate ions [...] Read more.

The objective of this study was to explore the removal of nitrate ions from groundwater by employing dynamic permeable reactive barriers (PRBs) with A400-nZVI. This research aimed to determine the parameters of the barrier and evaluate its overall capacity to retain nitrate ions during percolation with a potassium nitrate solution. The process involves obtaining zerovalent iron (nZVI) nanoparticles, which were synthesized and incorporated onto an anionic resin support material (A400) through the reduction reaction of ferrous ions with sodium borohydride (NaBH₄). This is achieved by preparing a ferrous sulfate solution, contacting it with the ion exchange resin at various solid–liquid mass ratios and gradually adding sodium borohydride under continuous stirring in an oxygen-free environment to create the A400-nZVI barrier. The results of the study, focusing on the development of permeable reactive barriers composed of nano zero-valent iron and ion exchangers, highlight the significant potential of water treatment processes when appropriately sized. The research specifically assesses the effectiveness of NO₃⁻ removal by using the A400-nZVI permeable reactive barrier, conducting laboratory tests that simulate a naturally stratified aquifer with high nitrate contamination. Full article

(This article belongs to the Special Issue Water Treatment, Innovative Method of Management and Regional Prospect of Pollutants)

► Show Figures

Figure 1

16 pages, 2149 KiB

Open AccessArticle

Effects of a Fishing Ban on the Ecosystem Stability and Water Quality of a Plateau Lake: A Case Study of Caohai Lake, China

by Tangwu Yang, Dianpeng Li, Qing Xu, Yijia Zhu, Zhengjie Zhu, Xin Leng, Dehua Zhao and Shuqing An

Water 2024, 16(5), 782; https://doi.org/10.3390/w16050782 - 6 Mar 2024

Cited by 1 | Viewed by 1481

Abstract

Long-term fishing bans have spurred extensive debate regarding their impacts on ecosystem structures, functions, and water qualities. However, data on the effects of specific changes induced by fishing bans on ecosystem structures, functions, and water qualities in lakes are still lacking. Therefore, the [...] Read more.

Long-term fishing bans have spurred extensive debate regarding their impacts on ecosystem structures, functions, and water qualities. However, data on the effects of specific changes induced by fishing bans on ecosystem structures, functions, and water qualities in lakes are still lacking. Therefore, the present study addresses this knowledge gap by employing an Ecopath model to assess alterations in an ecosystem’s structure and function before (2011) and after (2021) the implementation of the fishing ban in Caohai Lake and its association with changes in water quality. (1) We observed a substantial reduction in the area covered by submerged aquatic vegetation after the ban, amounting to a 65% decrease in coverage compared with that before the ban, and a 60% reduction in the total ecosystem’s biomass. (2) Following the ban, the number of fish species increased from 7 to 14, and this was accompanied by a rise in the fish biomass from 14.16 t·km⁻² to 25.81 t·km⁻²; a 4.5-fold increase in the total system consumption was observed, signifying accelerated energy and material flows within the ecosystem. (3) The fishing ban exhibited no significant impact on the total nitrogen concentration; however, it significantly reduced the water’s transparency and increased the total phosphorus, ammonia nitrogen, chemical oxygen demand, and chlorophyll contents (p < 0.05). This shift in nutrient dynamics fostered a transformation from a macrophyte-dominant lake to an alga-dominant lake. The fish abundance and diversity increase in closed-type macrophytic lakes, thereby accelerating energy and material flows within food webs. These findings present novel insights into the effective policy management of fishing bans within the Yangtze River Basin, thus enhancing our understanding of sustainable lake ecosystem management. Full article

(This article belongs to the Special Issue Water Pollution Control and Ecological Restoration)

► Show Figures

Figure 1

15 pages, 1295 KiB

Open AccessArticle

Continuous Heterogeneous Fenton for Swine Wastewater Treatment: Converting an Industry Waste into a Wastewater Treatment Material

by João Lincho, João Gomes, Rui C. Martins and Eva Domingues

Water 2024, 16(5), 781; https://doi.org/10.3390/w16050781 - 6 Mar 2024

Viewed by 1418

Abstract

Swine wastewater (SW) was treated using industrial wastes as raw materials in a pre-treatment process (coagulation or adsorption), followed by a continuous heterogeneous Fenton reaction. Before the treatment conducted as a continuous operation, two different batch optimization strategies were evaluated, in which the [...] Read more.

Swine wastewater (SW) was treated using industrial wastes as raw materials in a pre-treatment process (coagulation or adsorption), followed by a continuous heterogeneous Fenton reaction. Before the treatment conducted as a continuous operation, two different batch optimization strategies were evaluated, in which the effects of H₂O₂ concentration and pH were studied. The results show that using excessive H₂O₂ results in the same behavior, regardless of whether the pH is 3 or 7.5, while at low H₂O₂ concentrations, the acidic pH improves the chemical oxygen demand (COD) removal due to a higher solubility of iron. The partial addition of H₂O₂ after 60 min of the reaction proved to be unbeneficial. Considering other perspectives, a continuous Fenton process using iron filings (IF) as the iron source ([H₂O₂] = 50 mg/L) was applied after the SW pre-treatment, consisting of adsorption with red mud (RM) or coagulation with poly-diallyldimethylammonium chloride (PDADMAC). The RM adsorption presented higher COD removal and lower toxicity than the PDADMAC coagulation, revealing to be a suitable material for this purpose, but for both pre-treatments, the application of a subsequent continuous Fenton process revealed to be essential to achieve the COD discharge limits imposed by the Portuguese law. In addition, high amounts of dissolved iron were present in the samples (55–58 mg/L) after the Fenton process. However, after the overall treatment, the samples showed no harmful characteristics for Lepidium sativum, being classified as “non-toxic”, contrary to the initial wastewater. Full article

(This article belongs to the Section Wastewater Treatment and Reuse)

► Show Figures

Figure 1

16 pages, 4403 KiB

Open AccessArticle

Geospatial Analysis of Transmissivity and Uncertainty in a Semi-Arid Karst Region

by Thiago dos Santos Gonçalves, Harald Klammler and Luíz Rogério Bastos Leal

Water 2024, 16(5), 780; https://doi.org/10.3390/w16050780 - 6 Mar 2024

Cited by 1 | Viewed by 1212

Abstract

Aquifer properties, such as hydraulic transmissivity T and its spatial variability, are fundamental for sustainable groundwater exploitation in arid regions. Especially in karst aquifers, spatial variability can be considerable, and the application of geostatistical methods allows for spatial interpolation and mapping based on [...] Read more.

Aquifer properties, such as hydraulic transmissivity T and its spatial variability, are fundamental for sustainable groundwater exploitation in arid regions. Especially in karst aquifers, spatial variability can be considerable, and the application of geostatistical methods allows for spatial interpolation and mapping based on observations combined with the quantification of uncertainties. Moreover, direct measurements of T are typically scarce, while those of specific capacity S_c are more frequent. In this study, we establish the linear regression relationship between the logarithms of T and S_c measured in 51 wells in a semi-arid karst region in Northeastern Brazil. This relationship is used to estimate empirical values logT_emp based on measurements of logS_c at 269 wells. LogT_emp values are found to be normally distributed with an isotropic variogram of a significant nugget effect (attributed to local-scale karst features) and approximately 10 km range (attributed to larger-scale gradual changes in karst feature density). Ordinary kriging cross-validation indicates an optimum number of 25 neighboring wells for interpolation, which is used in a conditional sequential Gaussian simulation (SGSIM) to generate 500 realizations of logT_emp with respective maps of standard deviations and probabilities of (not) exceeding threshold values. High-transmissivity areas mostly coincide with karstified river valleys, while low-transmissivity areas occur toward the edges where aquifer thickness decreases. The resulting transmissivity maps are relevant for optimizing regional water management strategies, which includes stochastic approaches where transmissivity realizations can be used to parameterize multiple runs of numerical groundwater models. Full article

(This article belongs to the Section Hydrogeology)

► Show Figures

Figure 1

18 pages, 9004 KiB

Open AccessArticle

Numerical Analysis of Water–Sediment Flow Fields within the Intake Structure of Pumping Station under Different Hydraulic Conditions

by Cundong Xu, Junjiao Tian, Guoxia Wang, Haidong Lian, Rongrong Wang and Xiaomeng Hu

Water 2024, 16(5), 779; https://doi.org/10.3390/w16050779 - 5 Mar 2024

Cited by 1 | Viewed by 1319

Abstract

The vortices, backflow, and siltation caused by sediment-laden flow are detrimental to the safe and efficient operation of pumping stations. To explore the effects of water–sediment two-phase flow on the velocity field, vorticity field, and sediment distribution within intake structures, field tests and [...] Read more.

The vortices, backflow, and siltation caused by sediment-laden flow are detrimental to the safe and efficient operation of pumping stations. To explore the effects of water–sediment two-phase flow on the velocity field, vorticity field, and sediment distribution within intake structures, field tests and numerical simulations were conducted in this study with consideration for the sediment concentration, flow rate, and start-up combination. We applied a non-contact laser scanner and ultrasonic Doppler velocimetry to obtain the field data and reverse modeling of the three-dimensional model of the intake structure under siltation. A multiphase flow model based on the Euler–Euler approach combined with the k-ε turbulence model was adopted for numerical simulation under 10 working conditions, and the reliability was verified with field data. The results indicate that sediment promotes the evolution of coaxial vortices into larger-scale spiral vortices along the water depth, and the process of sediment deposition is controlled by the range, intensity, and flow velocity of the backflow zone. Furthermore, the maximum volume fraction of the near-bottom sediment increased by 202.01% compared to the initial state. The increase in flow rate exacerbates the turbulence of the flow field. Although the increase in sediment concentration benefits the flow diffusion, it further promotes sediment deposition. This study provides a new idea for modeling complex surfaces and considers different operating conditions. It can serve as a scientific reference for the structural optimization and anti-siltation design of similar water-conservancy projects. Full article

► Show Figures

Figure 1

19 pages, 6656 KiB

Open AccessArticle

Development and Application of a New Exponential Model for Hydraulic Conductivity with Depth of Rock Mass

by Zhi Dou, Xin Huang, Weifeng Wan, Feng Zeng and Chaoqi Wang

Water 2024, 16(5), 778; https://doi.org/10.3390/w16050778 - 5 Mar 2024

Cited by 1 | Viewed by 1385

Abstract

Hydraulic conductivity generally decreases with depth in the Earth’s crust. The hydraulic conductivity–depth relationship has been assessed through mathematical models, enabling predictions of hydraulic conductivity in depths beyond the reach of direct measurements. However, it is observed that beyond a certain depth, hydraulic [...] Read more.

Hydraulic conductivity generally decreases with depth in the Earth’s crust. The hydraulic conductivity–depth relationship has been assessed through mathematical models, enabling predictions of hydraulic conductivity in depths beyond the reach of direct measurements. However, it is observed that beyond a certain depth, hydraulic conductivity tends to stabilize; this phenomenon cannot be effectively characterized by the previous models. Thus, these models may make inaccurate predictions at deeper depths. In this work, we introduce an innovative exponential model to effectively assess the conductivity–depth relationship, particularly addressing the stabilization at greater depths. This model, in comparison with an earlier power-like model, has been applied to a globally sourced dataset encompassing a range of lithologies and geological structures. Results reveal that the proposed exponential model outperforms the power-like model in correctly representing the stabilized conductivity, and it well captures the fast stabilization effect of multiple datasets. Further, the proposed model has been utilized to analyze three distinct groups of datasets, revealing how lithology, geological stabilization, and faults impact the conductivity–depth relationship. The hydraulic conductivity decays to the residual hydraulic conductivity in the order (fast to slow): metamorphic rocks, sandstones, igneous rock, mudstones. The mean hydraulic conductivity in stable regions is roughly an order of magnitude lower than unstable regions. The faults showcase a dual role in both promoting and inhibiting hydraulic conductivity. The new exponential model has been successfully applied to a dataset from a specific engineering site to make predictions, demonstrating its practical usage. In the future, this model may serve as a potential tool for groundwater management, geothermal energy collection, pollutant transport, and other engineering projects. Full article

(This article belongs to the Special Issue Impact of Geological Uncertainty on Geological Hazards and Groundwater Environment Assessments)

► Show Figures

Figure 1

15 pages, 3602 KiB

Open AccessArticle

Assessing Objective Functions in Streamflow Prediction Model Training Based on the Naïve Method

by Yongen Lin, Dagang Wang, Tao Jiang and Aiqing Kang

Water 2024, 16(5), 777; https://doi.org/10.3390/w16050777 - 5 Mar 2024

Cited by 2 | Viewed by 1440

Abstract

Reliable streamflow forecasting is a determining factor for water resource planning and flood control. To better understand the strengths and weaknesses of newly proposed methods in streamflow forecasting and facilitate comparisons of different research results, we test a simple, universal, and efficient benchmark [...] Read more.

Reliable streamflow forecasting is a determining factor for water resource planning and flood control. To better understand the strengths and weaknesses of newly proposed methods in streamflow forecasting and facilitate comparisons of different research results, we test a simple, universal, and efficient benchmark method, namely, the naïve method, for short-term streamflow prediction. Using the naïve method, we assess the streamflow forecasting performance of the long short-term memory models trained with different objective functions, including mean squared error (MSE), root mean squared error (RMSE), Nash–Sutcliffe efficiency (NSE), Kling–Gupta efficiency (KGE), and mean absolute error (MAE). The experiments over 273 watersheds show that the naïve method attains good forecasting performance (NSE > 0.5) in 88%, 65%, and 52% of watersheds at lead times of 1 day, 2 days, and 3 days, respectively. Through benchmarking by the naïve method, we find that the LSTM models trained with squared-error-based objective functions, i.e., MSE, RMSE, NSE, and KGE, perform poorly in low flow forecasting. This is because they are more influenced by training samples with high flows than by those with low flows during the model training process. For comprehensive short-term streamflow modeling without special demand orientation, we recommend the application of MAE instead of a squared-error-based metric as the objective function. In addition, it is also feasible to perform logarithmic transformation on the streamflow data. This work underscores the critical importance of appropriately selecting the objective functions for model training/calibration, shedding light on how to effectively evaluate the performance of streamflow forecast models. Full article

(This article belongs to the Section New Sensors, New Technologies and Machine Learning in Water Sciences)

► Show Figures

Figure 1

12 pages, 5872 KiB

Open AccessArticle

Numerical Study of Pore Water Pressure in Frozen Soils during Moisture Migration

by Bicheng Zhou, Anatoly V. Brouchkov and Jiabo Hu

Water 2024, 16(5), 776; https://doi.org/10.3390/w16050776 - 5 Mar 2024

Cited by 1 | Viewed by 1479

Abstract

Frost heaving in soils is a primary cause of engineering failures in cold regions. Although extensive experimental and numerical research has focused on the deformation caused by frost heaving, there is a notable lack of numerical investigations into the critical underlying factor: pore [...] Read more.

Frost heaving in soils is a primary cause of engineering failures in cold regions. Although extensive experimental and numerical research has focused on the deformation caused by frost heaving, there is a notable lack of numerical investigations into the critical underlying factor: pore water pressure. This study aimed to experimentally determine changes in soil water content over time at various depths during unidirectional freezing and to model this process using a coupled hydrothermal approach. The agreement between experimental water content outcomes and numerical predictions validates the numerical method’s applicability. Furthermore, by applying the Gibbs free energy equation, we derived a novel equation for calculating the pore water pressure in saturated frozen soil. Utilizing this equation, we developed a numerical model to simulate pore water pressure and water movement in frozen soil, accounting for scenarios with and without ice lens formation and quantifying unfrozen water migration from unfrozen to frozen zones over time. Our findings reveal that pore water pressure decreases as freezing depth increases, reaching near zero at the freezing front. Notably, the presence of an ice lens significantly amplifies pore water pressure—approximately tenfold—compared to scenarios without an ice lens, aligning with existing experimental data. The model also indicates that the cold-end temperature sets the maximum pore water pressure value in freezing soil, with superior performance to Konrad’s model at lower temperatures in the absence of ice lenses. Additionally, as freezing progresses, the rate of water flow from the unfrozen region to the freezing fringe exhibits a fluctuating decline. This study successfully establishes a numerical model for pore water pressure and water flow in frozen soil, confirms its validity through experimental comparison, and introduces an improved formula for pore water pressure calculation, offering a more accurate reflection of the real-world phenomena than previous formulations. Full article

(This article belongs to the Special Issue Advances in Water–Rock Interactions and Thermo-Hydro-Mechanical Processes)

► Show Figures

Figure 1

23 pages, 7012 KiB

Open AccessArticle

Sensor Fish Deployments at the Xayaburi Hydropower Plant: Measurements and Simulations

by Pedro Romero-Gomez, Thanasak Poomchaivej, Rajesh Razdan, Wayne Robinson, Rudolf Peyreder, Michael Raeder and Lee J. Baumgartner

Water 2024, 16(5), 775; https://doi.org/10.3390/w16050775 - 5 Mar 2024

Viewed by 1325

Abstract

Fish protection is a priority in regions with ongoing and planned development of hydropower production, like the Mekong River system. The evaluation of the effects of turbine passage on the survival of migratory fish is a primary task for informing hydropower plant operators [...] Read more.

Fish protection is a priority in regions with ongoing and planned development of hydropower production, like the Mekong River system. The evaluation of the effects of turbine passage on the survival of migratory fish is a primary task for informing hydropower plant operators and authorities about the environmental performance of plant operations. The present work characterizes low pressures and collision rates through the Kaplan-type runners of the Xayaburi hydropower station. Both an experimental method based on the deployment of Sensor Fish and a numerical strategy based on flow and passage simulations were implemented on the analysis of two release elevations at one operating point. Nadir pressures and pressure drops through the runner were very sensitive to release elevation, but collision rates on the runner were not. The latter showed a frequency of occurrence of 8.2–9.3%. Measured magnitudes validated the corresponding simulation outcomes in regard to the averaged magnitudes as well as to the variability. Central to this study is that simulations were conducted based on current industry practices for designing turbines. Therefore, the reported agreement helps turbine engineers gain certainty about the prediction power of flow and trajectory simulations for fish passage assessments. This can accelerate the development of environmentally enhanced technology with minimum impact on natural resources. Full article

(This article belongs to the Special Issue River Science: Integrated Management of Water Resources in the Anthropocene)

► Show Figures

Figure 1

20 pages, 7930 KiB

Open AccessArticle

An Improved One-Line Evolution Formulation for the Dynamic Shoreline Planforms of Embayed Beaches

by Hung-Cheng Tao, Tai-Wen Hsu and Chia-Ming Fan

Water 2024, 16(5), 774; https://doi.org/10.3390/w16050774 - 5 Mar 2024

Viewed by 1086

Abstract

In this paper, an improved one-line evolution formulation is proposed and derived for the dynamic shoreline planforms of embayed beaches. Although embayed sandy beaches can perform several functions, serving as leisure spots and areas of coastal protection, shoreline advances and retreats occur continuously [...] Read more.

In this paper, an improved one-line evolution formulation is proposed and derived for the dynamic shoreline planforms of embayed beaches. Although embayed sandy beaches can perform several functions, serving as leisure spots and areas of coastal protection, shoreline advances and retreats occur continuously as a result of many natural forces, such as winds, waves, currents, tides, etc. The one-line evolution formulation for dynamic shoreline planforms based on the polar coordinate can be adopted to simulate high-planform-curvature shorelines and achieve better stability and simplicity in comparison with other description coordinates. While the polar coordinate and rectangular control volume are adopted to derive the one-line evolution formulation for dynamic shoreline planforms, the difference between the radial direction of the polar coordinate and the normal direction of the shoreline segment may result in inaccurate predictions of shoreline movements. In this study, a correction coefficient, which can adjust the influence of these two misaligned directions, is derived and included in the one-line evolution formulation, which is based on the polar coordinate. Thus, by considering the correction coefficient, an improved one-line evolution formulation for dynamic shoreline planforms of crenulate-shaped bays is proposed in this paper. Some numerical examples are provided to verify the merits of the proposed improved one-line evolution formulation. Moreover, the proposed numerical approach is applied to simulate the dynamic movements of the shoreline in Taitung—the southeastern part of Taiwan—and the effectiveness of the proposed formulation in solving realistic engineering applications is evidently verified. Full article

(This article belongs to the Special Issue Advanced Research in Civil, Hydraulic, and Ocean Engineering)

► Show Figures

Figure 1

17 pages, 3138 KiB

Open AccessArticle

Water Quality of Roof-Harvested Drinking Water Tanks in a Rural Area near a Gold and Copper Mine: Potential Health Risk from a Layer of Metal-Enriched Water and Sediment

by Ian A. Wright, Anna Christie and Amy-Marie Gilpin

Water 2024, 16(5), 773; https://doi.org/10.3390/w16050773 - 5 Mar 2024

Cited by 2 | Viewed by 2991

Abstract

This study investigated the drinking water quality of house water tanks that harvested roof runoff in a rural area surrounding a large copper and gold mine in Central Western New South Wales (NSW). Water was sampled from (1) the tops of water tanks, [...] Read more.

This study investigated the drinking water quality of house water tanks that harvested roof runoff in a rural area surrounding a large copper and gold mine in Central Western New South Wales (NSW). Water was sampled from (1) the tops of water tanks, (2) the bottoms of water tanks, and (3) kitchen taps. Water samples collected from the bottoms of tanks were turbid with suspended sediment. Concentrations of metals (lead, nickel, arsenic and manganese) from bottom-of-tank water samples often exceeded Australian drinking water guidelines. Overall, 37.2% of samples from bottoms of tanks exceeded arsenic guidelines (<10 µg L⁻¹). The mean concentration of lead in water from bottoms of tanks was 695 µg L⁻¹, with 18.6% of these samples exceeding lead guidelines (<10 µg L⁻¹) by >100 times. Our results highlight the risk of contaminated water and sediment at the bottoms of tanks. Further investigation of private household drinking water tanks is recommended for properties in other rural areas, including areas with and without nearby mining activity. We describe a layer of contaminated water and sediment at the bottoms of water tanks, near the water outlet, which is a potential contamination pathway and substantial health risk for house water supplies. Full article

(This article belongs to the Section Water Quality and Contamination)

► Show Figures

Graphical abstract

13 pages, 3213 KiB

Open AccessArticle

Water Level Fluctuation Rather than Eutrophication Induced the Extinction of Submerged Plants in Guizhou’s Caohai Lake: Implications for Lake Management

by Fusheng Chao, Xin Jiang, Xin Wang, Bin Lu, Jiahui Liu and Pinhua Xia

Water 2024, 16(5), 772; https://doi.org/10.3390/w16050772 - 5 Mar 2024

Cited by 1 | Viewed by 1777

Abstract

The intensifying global decline in submerged aquatic lake plants is commonly attributed to lake eutrophication, while other drivers such as water levels are seldom considered. This study focused on the sudden extinction of the submerged plants in Caohai Lake, Guizhou, and employed long-term [...] Read more.

The intensifying global decline in submerged aquatic lake plants is commonly attributed to lake eutrophication, while other drivers such as water levels are seldom considered. This study focused on the sudden extinction of the submerged plants in Caohai Lake, Guizhou, and employed long-term data and a whole-lake water level manipulation experiment to explore the impacts of nutrients and water level changes on the decline in submerged plants. The results indicated that over the past 40 years, the total nitrogen and ammonia nitrogen in the water did not change significantly, while the total phosphorus showed a significant decreasing trend. In recent years, however, the water level rose. The biomass of submerged plants continuously increased until a sudden large-scale extinction occurred in 2021; chlorophyll a also significantly increased. It is speculated that the large-scale extinction of the submerged plants was caused by water level fluctuations rather than eutrophication. After the restoration of the natural hydrological regime of low water levels in winter and spring and high levels in summer and autumn, the submerged plants gradually recovered, with the biomass increasing to 922.6 g/m² in 2023. The structural equation modeling indicated that the water depth and bottom light availability were the main drivers for the changes in the submerged plants. However, in lake protection and management, more attention is often paid to controlling nutrients, while other influencing factors are neglected. These findings confirm the importance of water levels in the decline in and restoration of submerged plants in shallow lakes, suggesting a focus on water level management in lake protection and aquatic vegetation restoration. Full article

► Show Figures

Graphical abstract

13 pages, 3221 KiB

Open AccessArticle

Holocene Paleoclimate Records in Equatorial West Africa: Insights Based on the Characterization of Glycerol Dialkyl Glycerol Tetraethers

by Peining Yang, Shengyi Mao, Yiyun Cao, Li Liu, Mengyue Zhai, Zhongyan Qiu and Lihua Liu

Water 2024, 16(5), 771; https://doi.org/10.3390/w16050771 - 5 Mar 2024

Viewed by 1199

Abstract

One gravity core retrieved from the Niger Delta was used to explore the origin of deposited organic matter (OM) and the paleo-climatic and environmental conditions over the Holocene in equatorial West Africa. The geochemical properties of sediments including glycerol dialkyl glycerol tetraethers (GDGTs) [...] Read more.

One gravity core retrieved from the Niger Delta was used to explore the origin of deposited organic matter (OM) and the paleo-climatic and environmental conditions over the Holocene in equatorial West Africa. The geochemical properties of sediments including glycerol dialkyl glycerol tetraethers (GDGTs) and elemental (%OC, %N, C/N) and isotopic (δ¹³C_org, δ¹⁵N) signatures were determined. The determination constrained the age of the column and revealed that the sediment OM was mainly derived from a marine source. The isoprenoid (iso)GDGTs were the dominant GDGTs, with a small amount of branched (br)GDGTs, which led to a low-branched and isoprenoid tetraether index (BIT, 0.02–0.21) and represented a low terrestrial input. Most isoGDGTs and OH-GDGTs were produced in situ by Marine Group I (MG-I) Thaumarchaeota, while the brGDGTs were mainly transported from land. A two-endmember model quantified the contribution of terrestrial OM, as 0.9–19.9% by BIT and 1.1–32.6% by δ¹³C. Accordingly, the millennium-scale sea surface temperatures (SSTs) were reconstructed based on the cyclopentane ring distribution (

{T E X}_{86}^{H}

) and the ring index of OH-GDGTs (RI-OH). The top core SSTs were lower than the modern mean annual SST due to the growth season and habitat depth of Thaumarchaeota. The reconstructed SSTs clearly revealed the four stages of paleoclimate change, in particular, the drought episode of 8.2 kyr and the following humid period. The above research has enhanced our understanding of the paleoclimate change in river outflow during the Holocene at the millennium scale. Full article

(This article belongs to the Section Water Quality and Contamination)

► Show Figures

Figure 1

22 pages, 2325 KiB

Open AccessReview

Survival and Development Strategies of Cyanobacteria through Akinete Formation and Germination in the Life Cycle

by Hye-In Ho, Chae-Hong Park, Kyeong-Eun Yoo, Nan-Young Kim and Soon-Jin Hwang

Water 2024, 16(5), 770; https://doi.org/10.3390/w16050770 - 4 Mar 2024

Cited by 1 | Viewed by 1667

Abstract

Eutrophic freshwater ecosystems are vulnerable to toxin-producing cyanobacteria growth or harmful algal blooms. Cyanobacteria belonging to the Nostocales order form akinetes that are similar to the seeds of vascular plants, which are resting cells surrounded by a thick membrane. They overwinter in sediment [...] Read more.

Eutrophic freshwater ecosystems are vulnerable to toxin-producing cyanobacteria growth or harmful algal blooms. Cyanobacteria belonging to the Nostocales order form akinetes that are similar to the seeds of vascular plants, which are resting cells surrounded by a thick membrane. They overwinter in sediment and germinate when conditions become favorable, eventually developing into vegetative cells and causing blooms. This review covers the cyanobacterial akinete of the Nostocales order and summarizes the environmental triggers and cellular responses involved in akinete germination and formation based on data from the literature. It also emphasizes the intimate and dynamic relationship that exists between the germination and formation of akinete in the annual life cycle of cyanobacteria. After comparing many published data, it is found that the tolerance ranges for factors affecting both akinete germination and formation do not differ significantly and are broadly consistent with the tolerance ranges for vegetative cell growth. However, the optimal range varies with different species and strains of cyanobacteria. The life cycle of cyanobacteria, as a result of akinete germination and formation, has a seasonal periodicity and spatial connectivity between the water column and the sediment. However, during the summer growing season, intimate coupling between akinete formation and germination can occur in the water column, and this can contribute to high population densities being maintained in the water column. During this time, shallow sediment could also provide suitable conditions for akinete germination, thereby contributing to the establishment of water column populations. The information summarized in this review is expected to help improve our shared understanding of the life cycle of the Nostocales cyanobacteria while also providing insights into the monitoring and management of harmful algal blooms. Full article

(This article belongs to the Special Issue The Management of Eutrophication, Harmful Algal Bloom and Ecological Health in Freshwater Ecosystems)

► Show Figures

Figure 1

28 pages, 9615 KiB

Open AccessArticle

Landscape-Scale Mining and Water Management in a Hyper-Arid Catchment: The Cuajone Mine, Moquegua, Southern Peru

by Morag Hunter, D. H. Nimalika Perera, Eustace P. G. Barnes, Hugo V. Lepage, Elias Escobedo-Pacheco, Noorhayati Idros, David Arvidsson-Shukur, Peter J. Newton, Luis de los Santos Valladares, Patrick A. Byrne and Crispin H. W. Barnes

Water 2024, 16(5), 769; https://doi.org/10.3390/w16050769 - 4 Mar 2024

Cited by 1 | Viewed by 2427

Abstract

The expansion of copper mining on the hyper-arid pacific slope of Southern Peru has precipitated growing concern for scarce water resources in the region. Located in the headwaters of the Torata river, in the department of Moquegua, the Cuajone mine, owned by Southern [...] Read more.

The expansion of copper mining on the hyper-arid pacific slope of Southern Peru has precipitated growing concern for scarce water resources in the region. Located in the headwaters of the Torata river, in the department of Moquegua, the Cuajone mine, owned by Southern Copper, provides a unique opportunity in a little-studied region to examine the relative impact of the landscape-scale mining on water resources in the region. Principal component and cluster analyses of the water chemistry data from 16 sites, collected over three seasons during 2017 and 2018, show distinct statistical groupings indicating that, above the settlement of Torata, water geochemistry is a function of chemical weathering processes acting upon underlying geological units, and confirming that the Cuajone mine does not significantly affect water quality in the Torata river. Impact mitigation strategies that firstly divert channel flow around the mine and secondly divert mine waste to the Toquepala river and tailings dam at Quebrada Honda remove the direct effects on the water quality in the Torata river for the foreseeable future. In the study area, our results further suggest that water quality has been more significantly impacted by urban effluents and agricultural runoff than the Cuajone mine. The increase in total dissolved solids in the waters of the lower catchment reflects the cumulative addition of dissolved ions through chemical weathering of the underlying geological units, supplemented by rapid recharge of surface waters contaminated by residues associated with agricultural and urban runoff through the porous alluvial aquifer. Concentrations in some of the major ions exceeded internationally recommended maxima for agricultural use, especially in the coastal region. Occasionally, arsenic and manganese contamination also reached unsafe levels for domestic consumption. In the lower catchment, below the Cuajone mine, data and multivariate analyses point to urban effluents and agricultural runoff rather than weathering of exposed rock units, natural or otherwise, as the main cause of contamination. Full article

(This article belongs to the Special Issue Impact of Climate and Socio-Economic on Irrigation Water Management and Agricultural Water Productivity)

► Show Figures

Graphical abstract

17 pages, 3030 KiB

Open AccessArticle

Source Apportionment and Health Risk Assessment of Groundwater Potentially Toxic Elements (PTEs) Pollution Characteristics in an Accident Site in Zhangqiu, China

by Min Wang, Xiaoyu Song, Yu Han, Guantao Ding, Ruilin Zhang, Shanming Wei, Shuai Gao and Yuxiang Liu

Water 2024, 16(5), 768; https://doi.org/10.3390/w16050768 - 4 Mar 2024

Cited by 1 | Viewed by 1199

Abstract

In order to understand the pollution degree and source of potentially toxic elements (PTEs) in groundwater around the accident site and evaluate their harm to human health, 22 groundwater samples were collected around the accident well, and the contents of As, Cd, Cr, [...] Read more.

In order to understand the pollution degree and source of potentially toxic elements (PTEs) in groundwater around the accident site and evaluate their harm to human health, 22 groundwater samples were collected around the accident well, and the contents of As, Cd, Cr, Cu, Hg, Ni, Pb, Zn, CH₂Cl₂ and C₂H₄Cl₂ were determined. On the basis of water quality evaluation, the source apportionment method combining qualitative and quantitative analysis was used to determine the main sources of PTEs in the region, and the health risk assessment model was used to evaluate the health risk of PTEs to the human body. The results show that pH, TDS, Th and COD all exceed the standard to varying degrees, among which TH is the index with the largest number exceeding the standard. The quality of the groundwater environment in the study area is at a very poor level, and the F value is between 7.25 and 8.49. The exposure results model showed that there was no non-carcinogenic risk of PTEs in the study area, and the health risk of oral intake in the exposed population was greater than that of skin contact. Compared with adults, children were more vulnerable to the health risk stress of PTEs in groundwater. The total carcinogenic risk is higher than the total non-carcinogenic risk. As, Cd and Cr are the primary factors causing carcinogenic health risks in this area. Principal component analysis (PCA) was used to analyze the sources of PTEs in groundwater, and three principal components were extracted. It was preliminarily determined that PTE pollution was mainly related to agricultural sources, anthropogenic industrial sources and industrial sedimentation sources. The results of positive definite factor matrix analysis (PMF) were basically similar to those of PCA, but PMF further clarified the contribution rate of three pollution sources, among which agricultural sources contributed the most to the accumulation of PTEs. Full article

(This article belongs to the Topic Human Impact on Groundwater Environment)

► Show Figures

Figure 1

13 pages, 1865 KiB

Open AccessArticle

Adsorption Removal Characteristics of Hazardous Metalloids (Antimony and Arsenic) According to Their Ionic Properties

by Seung-Hun Lee, Jinwook Chung and Yong-Woo Lee

Water 2024, 16(5), 767; https://doi.org/10.3390/w16050767 - 4 Mar 2024

Viewed by 1265

Abstract

Antimony and arsenic, which have a high carcinogenicity, should be removed depending on their ionic charge in water. Therefore, we attempted to confirm the adsorption characteristics of antimony and arsenic considering ionic charge to improve removal efficiency. We used palm-based activated carbon (PAC), [...] Read more.

Antimony and arsenic, which have a high carcinogenicity, should be removed depending on their ionic charge in water. Therefore, we attempted to confirm the adsorption characteristics of antimony and arsenic considering ionic charge to improve removal efficiency. We used palm-based activated carbon (PAC), coal-based activated carbon (CAC), modified activated carbon (MAC), styrene-divinylbenzene copolymer (SP825), activated alumina (AA), and zeolite as adsorbents for antimony and arsenic. Negatively charged adsorbents (CAC, PAC, MAC, and zeolite) with similar zeta potentials showed better removal efficiency as the surface area increased. However, SP825, which is almost neutral, and AA, which is positively charged, exhibited a high removal efficiency (100%) for arsenic and Sb(V), which are anions, regardless of surface area. However, due to the price, coal-based activated carbon or palm-based activated carbon is considered more advantageous than using AA or SP825. Last, during the arsenic adsorption process, As(III) was oxidized to As(V) due to Fe(II) contained in activated carbon. The addition of activated carbon can improve oxidation efficiencies of As(III) before coagulation and precipitation, in which As(V) is easier to remove than As(III). Full article

(This article belongs to the Section Water Quality and Contamination)

► Show Figures

Figure 1

22 pages, 15310 KiB

Open AccessArticle

The Applicability of the Drought Index and Analysis of Spatiotemporal Evolution Mechanisms of Drought in the Poyang Lake Basin

by Zihan Gui, Heshuai Qi, Faliang Gui, Baoxian Zheng, Shiwu Wang and Hua Bai

Water 2024, 16(5), 766; https://doi.org/10.3390/w16050766 - 4 Mar 2024

Viewed by 1379

Abstract

Poyang Lake, the largest freshwater lake in China, is an important regional water resource and a landmark ecosystem. In recent years, it has experienced a period of prolonged drought. Using appropriate drought indices to describe the drought characteristics of the Poyang Lake Basin [...] Read more.

Poyang Lake, the largest freshwater lake in China, is an important regional water resource and a landmark ecosystem. In recent years, it has experienced a period of prolonged drought. Using appropriate drought indices to describe the drought characteristics of the Poyang Lake Basin (PLB) is of great practical significance in the face of severe drought situations. This article explores the applicability of four drought indices (including the precipitation anomaly index (PJP), standardized precipitation index (SPI), China Z-index (CPZI), and standardized precipitation evapotranspiration index (SPEI)) based on historical facts. A systematic study was conducted on the spatiotemporal evolution patterns of meteorological drought in the PLB based on the optimal drought index. The results show that SPI is more suitable for the description of drought characteristics in the PLB. Meteorological droughts occur frequently in the summer and autumn in the PLB, with the frequency of mild drought being 17.29% and 16.88%, respectively. The impact range of severe drought or worse reached 22.19% and 28.33% of the entire basin, respectively. The probability of drought occurrence in the PLB shows an increasing trend in spring, while in most areas, it shows a decreasing trend in other seasons, with only a slight increase in the upper reaches of the Ganjiang River (UGR). One of the important factors influencing drought in the PLB is atmospheric circulation. The abnormal variation of the Western Pacific Subtropical High was one of the key factors contributing to the severe drought in the PLB in 2022. This study is based on a long-term series of meteorological data and selects the drought index for the PLB. It describes the spatiotemporal distribution characteristics and evolution patterns of drought and investigates the developmental path and influencing factors of drought in typical years. This study provides a reliable scientific basis for similar watershed water resource management. Full article

(This article belongs to the Special Issue Impacts of Climate Change on Extreme Hydro-Climatic Events: Droughts and Floods)

► Show Figures

Figure 1

15 pages, 4289 KiB

Open AccessArticle

Flood Forecasting Method and Application Based on Informer Model

by Yiyuan Xu, Jianhui Zhao, Biao Wan, Jinhua Cai and Jun Wan

Water 2024, 16(5), 765; https://doi.org/10.3390/w16050765 - 4 Mar 2024

Cited by 2 | Viewed by 2149

Abstract

Flood forecasting helps anticipate floods and evacuate people, but due to the access of a large number of data acquisition devices, the explosive growth of multidimensional data and the increasingly demanding prediction accuracy, classical parameter models, and traditional machine learning algorithms are unable [...] Read more.

Flood forecasting helps anticipate floods and evacuate people, but due to the access of a large number of data acquisition devices, the explosive growth of multidimensional data and the increasingly demanding prediction accuracy, classical parameter models, and traditional machine learning algorithms are unable to meet the high efficiency and high precision requirements of prediction tasks. In recent years, deep learning algorithms represented by convolutional neural networks, recurrent neural networks and Informer models have achieved fruitful results in time series prediction tasks. The Informer model is used to predict the flood flow of the reservoir. At the same time, the prediction results are compared with the prediction results of the traditional method and the LSTM model, and how to apply the Informer model in the field of flood prediction to improve the accuracy of flood prediction is studied. The data of 28 floods in the Wan’an Reservoir control basin from May 2014 to June 2020 were used, with areal rainfall in five subzones and outflow from two reservoirs as inputs and flood processes with different sequence lengths as outputs. The results show that the Informer model has good accuracy and applicability in flood forecasting. In the flood forecasting with a sequence length of 4, 5 and 6, Informer has higher prediction accuracy, and the prediction accuracy is better than other models under the same sequence length, but the prediction accuracy will decline to a certain extent with the increase in sequence length. The Informer model stably predicts the flood peak better, and its average flood peak difference and average maximum flood peak difference are the smallest. As the length of the sequence increases, the number of fields with a maximum flood peak difference less than 15% increases, and the maximum flood peak difference decreases. Therefore, the Informer model can be used as one of the better flood forecasting methods, and it provides a new forecasting method and scientific decision-making basis for reservoir flood control. Full article

► Show Figures

Figure 1

19 pages, 5537 KiB

Open AccessArticle

Time Series Analysis of Water Quality Factors Enhancing Harmful Algal Blooms (HABs): A Study Integrating In-Situ and Satellite Data, Vaal Dam, South Africa

by Altayeb A. Obaid, Elhadi M. Adam, K. Adem Ali and Tamiru A. Abiye

Water 2024, 16(5), 764; https://doi.org/10.3390/w16050764 - 3 Mar 2024

Viewed by 2015

Abstract

The Vaal Dam catchment, which is the source of potable water for Gauteng province, is characterized by diverse human activities, and the dam encounters significant nutrient input from multiple sources within its catchment. As a result, there has been a rise in Harmful [...] Read more.

The Vaal Dam catchment, which is the source of potable water for Gauteng province, is characterized by diverse human activities, and the dam encounters significant nutrient input from multiple sources within its catchment. As a result, there has been a rise in Harmful Algal Blooms (HABs) within the reservoir of the dam. In this study, we employed time series analysis on nutrient data to explore the relationship between HABs, using chlorophyll-a (Chl−a) as a proxy, and nutrient levels. Additionally, Chl−a data extracted from Landsat-8 satellite images was utilized to visualize the spatial distribution of HABs in the reservoir. Our findings revealed that HAB productivity in the Vaal Dam is influenced by the levels of total phosphorus (TP) and organic nitrogen (KJEL_N), which exhibited a positive correlation with chlorophyll-a (Chl−a) concentration. Long-term analysis of Chl−a in-situ data (1986–2022) collected at a specific point within the reservoir showed an average concentration of 11.25 μg/L. However, on certain stochastic dates, Chl−a concentration spiked to very high values, reaching a maximum of 452.8 μg/L, coinciding with elevated records of TP and KJEL_N concentrations on those dates, indicating their effect on productivity levels. The decadal time series and trend analysis demonstrated an increasing trend in Chl−a productivity over the studied period, rising from 4.75 μg/L in the first decade (1990–2000) to 10.51 μg/L in the second decade (2000–2010), and reaching 16.7 μg/L in the last decade (2010–2020). The rising averages of the decadal values were associated with increasing decadal averages of its driving factors, TP from 0.1043 to 0.1096 to 0.1119 mg/L for the three decades, respectively, and KJEL_N from 0.80 mg/L in the first decade to 1.14 mg/L in the last decade. Satellite data analysis during the last decade revealed that the spatial dynamics of HABs are influenced by the dam’s geometry and the levels of discharge from its two feeding rivers, with higher concentrations observed in meandering areas of the reservoir and within zones of restricted water circulation. Full article

► Show Figures

Figure 1

Journal Menu

Journal Browser

Water, Volume 16, Issue 5 (March-1 2024) – 171 articles

Further Information

Guidelines

MDPI Initiatives

Follow MDPI