Methane

Steam reforming is an important industrial process for hydrogen production. Acetone, the by-product of phenol production from cumene peroxidation, is a useful source of hydrogen due to its availability and low value compared to hydrogen fuel. This study aimed to utilize the Gibbs free energy minimization method using the Soave–Redlich–Kwong (SRK) equation of state (EOS) to conduct a thermodynamic analysis of the steam reforming process for pure component acetone. The steam reforming process is temperature dependent, with increasing temperatures leading to higher hydrogen production. Competing reactions, particularly the exothermic reverse water–gas shift, impact hydrogen yields beyond 650 °C. The study identified 600 °C as the optimum temperature to strike a balance between maximizing hydrogen production and minimizing the reverse water–gas shift’s impact. The optimal hydrogen yield (70 mol%) was achieved at a steam-to-oil ratio (STOR) of 12. High STOR values shift the equilibrium of the water–gas shift reaction towards hydrogen production due to increased steam, effectively consuming acetone and favoring the desired product. Atmospheric pressure is optimum for hydrogen production because the equilibrium of gas phase reactions shifts in favor of the lighter components at lower pressures. Full article

The evaluation of measurement uncertainty of natural gas properties calculated from composition data are an essential aspect of fiscal metering in the trade of natural gas. For conformity assessment, and in gas allocation, it is essential to have a reliable value for the uncertainty. This need is also reflected in, e.g., ISO 6976, the standard for computing natural gas properties, which follows the requirements of the “Guide to the expression of uncertainty in measurement” much more closely. Normalised compositions and their associated standard uncertainties do not suffice for this purpose. A novel algorithm is provided to recover these correlations from the normalised fractions and associated standard uncertainties, enabling the industry work with the data already stored in their repositories. The standard uncertainties are reproduced within 2%, which is acceptable for uncertainty calculations. The correlation coefficients obtained from the recovery algorithm agree with the ones obtained by normalisation. Full article

This study aimed to obtain the energy recovery potential of the biogas produced from anaerobic digestion (AD) of the sludge from a wastewater treatment plant (WWTP), including the use of biochar as an additive for substrate co-digestion and catalyst for methane production. We carried out the following steps: chemical–physical laboratory analyses of sludge samples; the building, operation, and monitoring of an experimental prototype of a batch bioreactor of 2.5 L for the AD of the sludge (with and without the addition of charcoal); qualitative measurements of biogas; the study of charcoal morphology; and the projection of useful energy generation from the AD sludge after treatment. A study on the economic viability and avoided greenhouse gas (GHG) emissions was performed based on the experimental results. The substrate showed alterations in all the physicochemical parameters evaluated after AD, such as a reduction of 35% in the biochemical oxygen demand (BOD) analysis; the experiment carried out using biochar showed positive results regarding the speed of CH₄ production and a greater potential for energy recovery. Enterprises from 2000 kW onwards would present an internal rate of return (IRR) equal to or higher than the minimum attractiveness rate (MAR) of 15%. The USD 95.28/MWh tariff presented economic feasibility for the studied scenarios. WWTPs that produce enough sludge to generate power of 2000 kW would need to process the waste of 117,200 inhabitants with charcoal addition and 136,000 without charcoal. It would be possible to avoid the emission of 2307.97 tCO₂/year (2000 kW). According to the results obtained, this study revealed that using alternative energies based on anaerobic digestion and biochar can generate positive results regarding methane production, and its application as an energy source in a WWTP proved to be economically viable at a specific level of power production. Full article

During the process of mining underground coal, the coal emits a large amount of methane into the mining space, which may lead to methane accumulation and exceed explosion safety limits When the methane encounters a fire source, a methane explosion may occur. The forceful impact caused by a methane explosion in an underground roadway can cause serious damage to the roadway structures and even lead to the collapse of the ventilation system. At the same time, the explosion impact may result in the death of workers and cause physical injury to the surviving workers. Therefore, it is necessary to study the damage effect and injury range of methane explosions. On the basis of the damage criteria and damage characteristics of methane explosions, according to the overpressure distribution of shock waves in the propagation process of a methane explosion, the explosion hazard range is divided into four ranges (from inside to outside): death range, serious injury range, minor injury range, and safety range. Four injury degrees of shock wave overpressure to personal body (slight, medium, serious injury, death), and seven damage degrees of overpressure to structures are also analyzed. The thresholds of their damage (destruction) are determined. On this basis, an experimental system and numerical simulation are constructed to measure damage characteristics, the overpressure value, and the range distance of a methane explosion with different initial explosion intensities. According to the experimental and numerical results, the attenuation formula of a methane explosion shock wave in the propagation process is derived. The research results show that the overpressure and impulse of shock waves are selected as the damage criteria for comprehensive evaluation, and the overpressure criterion is suitable of determining the injury (failure) range over long distances. The four injury ranges are in line with the actual situation and are reasonable. The injury degree also conforms to the medical results, which can be used to guide the injury degree of mine methane explosions. The injury range caused by methane explosions with different initial explosion intensities is reasonable and is basically consistent with the on-site situation. The derived attenuation formula and calculated safety distance are in good agreement with the experimental and numerical results. The research results can provide guidance and help in the escape, rescue, and protection of coal mine underground person. Full article

Municipal solid waste (MSW) remains in sanitary landfills for many years. To maintain a circular economy, assessing the feasibility of reinserting MSW excavated from sanitary landfills into the production chain is important. This reduces environmental impacts, helping to minimize soil, water, and air pollution resulting from the decomposition of waste in landfills. In addition, it promotes economic benefits from the energy recovery of waste, such as biomass, which can generate electricity and heat, contributing to a sustainable energy matrix. The present study aimed to evaluate the easily degradable MSW group with 24 years of landfilling (ED-24) regarding its potential for methane generation. The ED group consisted of putrescible organic matter, wood, paper, cardboard, and pruning landfilled at a sanitary landfill in Southeastern Brazil. The feasibility of valuing ED-24 as a substrate for anaerobic digestion was assessed by analyzing its physical, chemical, and biochemical characterization and calculating its theoretical methane yield (TMY). The total volatile solids (TVS) and holo-cellulose contents of ED-24 were 73.45% and 61.39%, respectively, on a dry-weight basis. These values were in the range of those determined for non-landfilled lignocellulosic materials. Thus, 24 years of landfilling partially degraded the anaerobically lignocellulosic materials. The TMY of ED-24 was 233.41 mL CH4/g TVS, indicating a potential to generate methane. Despite the high lignin value, ED-24 can be valued as a substrate for anaerobic digestion. Full article

Anaerobic digestion plays a crucial role in the transition toward a circular economy. Incorporating system supervision through mathematical modelling can enhance control and resilience. This study aims to assess the impact of scheduled digester maintenance on the effectiveness of modelling as a tool for monitoring and control. Data from a pilot-scale plug-flow digester were analyzed using an adapted ADM1 model. The maintenance involved halting the digester and removing sedimented solids. Model calibration indicated solid retention in the first two zones of the reactor, while the hydrolysis coefficient and biogas potential remained at 0.122 d⁻¹ and 100.4 mL CH₄/gVS, respectively. The average biogas production decreased from 156 to 109 mL/gVS pre- and post-maintenance. Simulations showed a decline in the model’s predictive accuracy after maintenance. To improve model fit, the initial conditions, solids retention, and kinetic parameters were adjusted. Optimal performance was achieved with k_hyd at 0.045 d⁻¹ and B₀ at 52.28 mL gVS⁻¹, revealing an issue with the digester’s heating system. In conclusion, maintenance can significantly alter digester conditions, requiring model recalibration to maintain its effectiveness as a digital copilot for process supervision. Full article

Several additives have been shown to reduce enteric methane emissions from ruminants when supplied in feed. However, utilising this method to deliver such methane-reducing compounds (MRCs) in extensive grazing systems is challenging. Use of livestock drinking water presents a novel method to deliver MRCs to animals in those systems. This work evaluated 13 MRCs for suitability to be deployed in this manner. Compounds were analysed for solubility and stability in aqueous solution using Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy. Furthermore, aqueous solutions of MRCs were subjected to variations in temperature and starting pH of water used to assess solubility and stability of the MRCs in simulated water trough conditions, also using FTIR-ATR spectroscopy. In vitro batch culture fermentations were carried out using a medium-quality tropical grass feed substrate, to simulate pastures consumed by cattle in extensive grazing systems. Measurements were made of total gas and methane production, in vitro dry matter digestibility (IVDMD), and volatile fatty acid (VFA) concentration. Of the MRCs tested, 12 were found to be soluble and stable in water using the FTIR method employed, whilst the other could not be measured. Of the 12 soluble and stable MRCs, one containing synthetic tribromomethane (Rumin8 Investigational Veterinary Product) reduced methane production by 99% (p = 0.001) when delivered aqueously in vitro, without a reduction in IVDMD (p = 0.751), with a shift towards decreased acetate and increased propionate production and decreased total VFA production (p < 0.001). Other compounds investigated also appeared suitable, and the methods developed in this study could be used to guide future research in the area. Full article

Hydrogen (H₂) is a highly efficient and clean energy source with the potential for renewable energy. The production of H₂ from biological routes such as biophotolysis, photofermentation, dark fermentation, and bioelectrochemical production is characterized as a renewable alternative to current production, which is mainly based on energy-intensive electrochemical and thermochemical processes and responsible for the emission of high amounts of environmentally harmful compounds. Dark fermentation is the most efficient and cost-effective method for producing biohydrogen, making it a key research focus. This article offers a comprehensive overview of the dark fermentation process with the aim of enhancing hydrogen productivity and yields. Aspects related to the main substrates used, the inoculum sources and their pretreatment, and physical-chemical parameters of the process are covered. Furthermore, this manuscript addresses topics such as process integration, genetic and metabolic engineering of fermentative microorganisms, and the main types of bioreactors aimed at greater yields and productivity of biohydrogen to enable its production through dark fermentation on a larger scale. Full article

This research project aimed to address the growing concern about methane emissions from seaweed by developing a Convolutional Neural Network (CNN) model capable of accurately predicting these emissions. The study used PANDAS to read and analyze the dataset, incorporating statistical measures like mean, median, and standard deviation to understand the dataset. The CNN model was trained using the ReLU activation function and mean absolute error as the loss function. The model performance was evaluated through MAPE graphs, comparing the mean absolute percentage error (MAPE) between training and validation sets and between true and predicted emissions, and analyzing trends in yearly greenhouse gas emissions. The results demonstrated that the CNN model achieved a high level of accuracy in predicting methane emissions, with a low MAPE between the expected and actual values. This approach should enhance our understanding of methane emissions from Sargassum, contributing to more accurate environmental impact assessments and effective mitigation strategies. Full article

The electrochemical reduction of carbon dioxide (CO₂) to methane (CH₄) holds tremendous potential in mitigating greenhouse gas emissions and producing renewable fuels. Thus, this review provides a comprehensive overview of the utilization of copper-based metal–organic frameworks (Cu-MOFs) as catalysts for this transformative process. Diverse key aspects of Cu-MOFs that make them ideal candidates for CO₂ reduction are discussed, including their high surface areas, tunable pore sizes, and customizable active sites. Furthermore, recent advances in the design and synthesis of Cu-MOFs tailored specifically for enhanced catalytic activity and selectivity towards CH₄ production are highlighted. Additionally, mechanistic insights into the CO₂ reduction process on Cu-MOF catalysts are examined. Moreover, the recent application of diverse Cu-MOFs and derived materials in electrochemical reduction systems is discussed, and future research directions and potential applications of Cu-MOFs in sustainable energy conversion technologies are outlined. Thus, this review provides valuable insights into the current state of the art and the prospects for utilizing Cu-MOFs as efficient catalysts for the electrochemical conversion of CO₂ to CH₄, offering a pathway towards a greener and more sustainable energy future. Full article

The sustainable meeting of the global quest for ruminant intensification dictates the need to identify alternative, eco-friendly, and safe feed ingredients. In this sense, macroalgae offer a new paradigm in sustainable ruminant feed supply. This study aimed to investigate the potential of sub-Antarctic macroalgae, including Lessonia flavicans, Macrocystis pyrifera, Gigartina skottbergii, and Ulva Lactuca, regarding their chemical composition, in vitro gas production, and CH₄ production. A completely randomized design consisted of a 96 h (h) incubation that included four different species and a control (alfalfa hay) with buffered rumen fluid. In vitro total gas, fermentation characteristics, and CH₄ production were evaluated. The highest and the lowest crude protein (CP) contents were for U. lactuca (185.9 g/kg) and G. skottsbergi (86 g/kg), respectively (p < 0.0001). All macroalage had lower levels of natural detergent fiber (NDF) and acid detergent fiber (ADF) compared to alfalfa hay (p < 0.0001). The highest potential of gas production (b) was for M. pyriphera (162.8 mL gas/g DM), followed by alfalfa (119.3 mL gas/g DM). However, G. skottsbergi and M. pyriphera showed the highest dry matter degradability at 96 h (68.49 and 67.62 mg/100 mg, respectively; p < 0.0001) and microbial crude protein (679.8 and 669.8 mg/g, respectively, p < 0.0001). All four tested algae produced lower amounts of methane compared to alfalfa hay (p < 0.0001). After 24 h of incubation, M. pyriphera, L. flavicons, G. skottsbergi, and U. lactuca reduced CH₄ by 99.7%, 98.6%, 92.9%, and 79.8%, respectively, when compared with the control. Also, all tested algae had lower (p = 0.0001) CH₄ production (ml CH₄/g Dry matter degradability, DMD) than alfalfa hay. The current results suggest that M. pyriphera and L. flavicons are promising feed additives for ruminants with eco-friendly production and acceptable CP content and DMD that could effectively mitigate CH₄ emissions. Overall, these findings suggest that macroalgae hold promise as a substitute feed source for sustaining ruminant production at the onset of global warming. Full article

The addition of methane-reducing compounds (MRCs) to livestock drinking water presents an alternative method for enteric methane mitigation in extensive systems where these compounds cannot be fed through the diet. This work evaluated several such compounds with the potential to be deployed in this manner. Methane-reducing compounds were selected based on the existing literature and likelihood of dissolution when combined with a commercially available water-based nutrient supplement (uPRO) (uPRO ORANGE^®, DIT AgTech, QLD, Australia). This, in turn, would demonstrate the capacity for MRCs to be administered through animal drinking water when such supplements are in use. This technique requires the analysis of MRC solubility and stability in solution, which was completed via Fourier transform infrared-attenuated total reflectance spectroscopy. The uPRO supplement is comprised of urea, urea phosphate, and ammonium sulfate, providing nitrogen, phosphorus, and sulfur—limiting nutrients for ruminants grazing extensive systems during drier periods of the year. Accordingly, medium-quality Rhodes grass hay was used in fermentation runs to simulate a basal diet during the dry season. Methane-reducing compounds were assessed in accordance with each variable measured (gas/methane production, dry matter digestibility, stability under different environmental conditions) along with existing research in the field to determine the most suitable compound for co-administration. Whilst most compounds examined in this study appeared to retain their structure in solution with uPRO, fermentation results varied in terms of successful methane mitigation. The additive Agolin Ruminant L emerged as the most promising compound for further in vivo investigation. Full article

To achieve optimal performance, anaerobic digestion (AD) requires well-balanced operation conditions, steady physical–chemical conditions, and adequate nutrient concentrations. The use of anaerobic structured-bed reactor (ASTBR) presents these conditions. However, several additional investigations are required to elucidate robustness to treat domestic sewage (DS). This pioneering study investigated the performance of an ASTBR in treating DS across four decreasing hydraulic retention times (HRTs) (12, 8, 6, and 5 h). The study aimed to assess organic matter removal, the influence on physical–chemical parameters, and the monitoring of trace metals (TMs) during long-term operation (614 days). Overall, the results underscore the viability of employing ASTBR for DS treatment, achieving an average chemical oxygen demand (COD) removal efficiency of 70%. The system demonstrated consistent long-term operation over 614 days, maintaining stability even with decreasing hydraulic retention times (HRTs). The average effluent concentration of volatile fatty acids (VFAs) was 20.4 ± 3.3 mg L⁻¹, with a pH value averaging 7.2 ± 0.1. TM concentrations at an HRT of 12 h exhibited higher levels in the effluent compared to the influent, gradually decreasing over the course of operation and ultimately stabilizing at levels similar to those observed in the influent. The concentrations of metals, including Ba, Cr, Fe, Mn, Ni, Pb, Se, and Zn, monitored in the effluent samples adhered to the allowable discharge thresholds as stipulated by Brazilian regulations. Full article

To develop technology to efficiently utilize digestate from methane fermentation in agricultural production, the application of digestate from methane fermentation for supplying nutrients in sweet potato cultivation was investigated in sandy soil. Different strengths of diluted digestate with water were applied to sweet potato plants as water and nutrient supplies to determine the appropriate strength of digestate from methane fermentation for sweet potato production in sandy soil. The growth of sweet potato cultivated with diluted digestate was also compared with that of sweet potato cultivated with a commercial chemical nutrient solution. The growth rate of the tuberous roots with the strength of 1/20 of the digestate was greatest among the treatments with different digestate strengths (1/80–1/2) and commercial nutrient solutions (1/4–1). Consequently, we proposed a sweet potato production system using a bottom irrigation method with digestate from methane fermentation, which will be applicable in semiarid regions. In conclusion, the results of this study can be effectively used in a regional agricultural system combined with a methane fermentation system and can contribute to increasing food production as well as the establishment of a resource recycling society. Full article

Ruminant livestock industries can support the climate stabilization ambitions of the Paris Agreement through interventions that reduce GHG emissions (predominantly biogenic methane) and sequester carbon in landscapes. This study explored pathways for the Australian red meat industry (grazing, feedlot finishing, and domestic processing) to become climate neutral, whereby the radiative forcing (RF) footprint is plateaued and there is no additional forcing contribution. Emissions timeseries (CO₂, N₂O, CH₄) were compiled for 1990 to 2020 and projected to 2030 under a business-as-usual scenario (including an 18% increase in sheep and 13% increase in beef cattle) and with a range of production system and vegetation management interventions. The RF footprint peaked in 2018 at 7.13 mW/m² and decreased to 7.07 mW/m² in 2020. With the future expansion of the herd/flock and under business-as-usual conditions, the RF footprint is projected to increase by 2.8% by 2030. However, with a combination of interventions, production has the potential to increase with a decreasing RF footprint, a condition that can be described as climate neutral. The Australian red meat industry has made an historical contribution to global RF increase. However, with ongoing RF management, it is possible to increase food production within climate-neutral limits. Full article

Previous studies have shown that light quality and quantity affect methane emissions from plants. However, the role of photoperiod in plant-derived methane has not been addressed. We studied the effects of two photoperiods—long-day (16 h light/8 h dark), and short-day (8 h light/16 h dark)—on growth and methane emissions of lettuce (a long-day plant), mung bean (a short-day plant), and tomato (a day-neutral plant) under a temperature regime of 22/18 °C. All species were grown under both light durations. First, seeds were germinated in Petri dishes for one week, then plants were transferred to pots and randomly assigned to one of the two experimental conditions. Under each condition, twelve plants were grown for 21 days; at that time, plant growth and physiological traits, including plant dry mass, growth index, photosynthesis, chlorophyll fluorescence, total chlorophyll, nitrogen balance index, flavonoids, and anthocyanin, were measured. Lettuce plants under the short-day photoperiod had the highest methane emissions. Long-day plants that were exposed to short-day conditions and short-day plants that were exposed to long-day conditions were stressed; day-neutral plants were also stressed under short days (p < 0.05). All three species had decreased total dry mass under short-day conditions, most likely because of decreased photosynthesis and increased transpiration and stomatal conductance. Methane emission was positively correlated with shoot/root mass ratio, nonphotochemical quenching and anthocyanin; but was negatively correlated with stem height, dry mass, photosynthesis, water-use efficiency, total chlorophyll, and flavonoids (p < 0.05). This study revealed that, besides light intensity and quality, light duration can also affect methane emissions from plants. Full article

This study investigates the utilization of controlled nanocatalysts in methane conversion reactions, addressing the pressing need for the efficient utilization of methane as a feedstock for valuable chemicals and clean energy. The methods employed include a comprehensive review of recent advancements in nanocatalyst synthesis, characterization, and application, as well as the critical analysis of underlying mechanisms and controversies in methane activation and transformation. The main findings reveal significant progress in the design and synthesis of controlled nanocatalysts, enabling enhanced activity, selectivity, and stability in methane conversion reactions. Moreover, the study highlights the importance of resolving controversies surrounding metal–support interactions for rational catalyst design. Overall, the study underscores the pivotal role of nanotechnology in shaping the future of methane utilization and sustainable energy production, providing valuable insights for guiding future research directions and technological developments in this field. Full article

In the present study, a comparison of the dry reforming of a gas mixture containing methane, carbon dioxide and nitrogen without contaminants to a ruthenium-based Ru/Al₂O₃ catalyst was carried out in a microreactor for the first time. The influence of the contact time, temperature and composition of the feed on the conversion was exhaustively investigated. The optimal operating conditions were found to be a contact time of 80 milliseconds, a temperature of 700 °C and a CH₄:CO₂ ratio of 1. The assessment of diffusional limitations reveals that there is no resistance to mass transfer, which reveals the potential benefit of the determination of intrinsic reaction kinetics within a microreactor. Full article

To solve the sand problem during the depressurization of methane hydrate (MH), we proposed a method to build a porous grout body with sufficient permeability and strength around the wellbore through inhibitor pre-injection and grouting, and verified its effectiveness and potential in our previous research using artificial cores created with silica sand and alternative hydrates such as TBAB- hydrate and iso-butane hydrate. However, all of the artificial cores mentioned above were created with high homogeneity, injected, cured, and had their physical properties measured in the vertical direction, which differs from real reservoir conditions. To investigate the effects of grouting in a more realistic fluid flow, we conducted further experiments using horizontal 1D cores, 1D cubic models, and a 2D cross-sectional model mimicking the near wellbore. These experiments revealed that (1) the generated gas somewhat suppressed the effects of grouting as in the case of previous experiments, and (2) grouted reservoirs would be heterogenous and anisotropic due to the fluid densities and the distribution of grout particles and turbidite sediments, but sufficient permeability and satisfactory strength could still be attained. The above series of experiments demonstrated that our method has the potential to effectively produce actual MH, preventing sand problems even in heterogeneous and anisotropic grouted reservoirs. Full article