F: Electrical Engineering
A section of Energies (ISSN 1996-1073).
Section Information
We are living nowadays an Energy transition. We are going more electrical than ever before in transportation: electrical vehicles and ships, electrical motors are every were. Back home, more electronics, electrical kitchens and electronic controlled devices are more and more present. In some houses is not rare to see photovoltaic systems, home batteries, electrical vehicle chargers, electrical grass cutting machines, even equipped with small batteries. It is clear that energy is going more to be electrical and this is a great chance to go more toward renewable energies. Photovoltaics, wind power generation, and other renewables are going to play an unprecedented role in the way that we generate, store and consume energy. This is a chance of the change in a sustainable world that has only one possible direction, with new technologies and ideas.
This section is devoted to present the new technologies, trends and breakthroughs to promote more renewable energies for a future 100% renewable energy reality. This section, focuses on original and new research results regarding electrical power and energy technologies, as well as in diverse applications. Thus, manuscripts on planning, design, implementation, theoretical studies, economical and viability studies, as well as on their application to traditional as well as novel scenarios are solicited. Submissions addressing reviews and surveys will also be welcome. Download Section Flyer
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Advances in Permanent Magnet Motor and Motor Control (Deadline: 28 November 2024)
- Robust Control of Electric Drives and Mechatronic Systems (Deadline: 28 November 2024)
- Advances in Power and Energy Management for Distribution Systems with High Penetration of Distributed Energy Resources (Deadline: 30 November 2024)
- Advanced Technologies for Modeling, Optimization and Control of the Distribution Grid (Deadline: 30 November 2024)
- Thermo-Mechanical and Electrical Measurements for Energy Systems (Deadline: 30 November 2024)
- Trends and Challenges in Power System Stability and Control (Deadline: 30 November 2024)
- Intelligence of Energy and Power System (Deadline: 30 November 2024)
- Demand-Side Energy Management Optimization (Deadline: 12 December 2024)
- New Challenges and Development of Electric Machines (Deadline: 19 December 2024)
- New Circuit Configurations and Control in Power Electronics and Power Magnetics (Deadline: 20 December 2024)
- Integration of Renewable Energy in Australasian Power Systems: Problems and Solutions (Deadline: 20 December 2024)
- Advances in Permanent Magnet Synchronous Generator (Deadline: 25 December 2024)
- Computational Intelligence-Based Modeling, Control, Estimation, and Optimization in Electrical Motor/Drive, Renewable Energy, and Power Systems, Volume II (Deadline: 30 December 2024)
- Advanced Reliability Modelling and Operation Management Strategies for Power Systems (Deadline: 31 December 2024)
- Power Converters: Modeling, Control, and Applications in Power Electronics—2nd Edition (Deadline: 31 December 2024)
- Innovative Techniques for Distribution Grids Digitalization (Deadline: 31 December 2024)
- Modeling Approaches of Electromagnetic Devices for R&D Engineers (Deadline: 31 December 2024)
- Large-Scale Integration of Renewable Energy in Electric Systems (Deadline: 31 December 2024)
- Development of Electrical Machines: Latest Studies and Future Prospects (Deadline: 31 December 2024)
- Selected Papers from the ICEUBI2024—International Congress on Engineering (Deadline: 31 December 2024)
- Permanent Magnet Motors: Revolutionary Breakthrough in Future Power (Deadline: 15 January 2025)
- Power System Voltage Stability, Modelling, Analysis and Control (Deadline: 15 January 2025)
- Interaction Optimization Between Integrated Energy Systems and Power Systems (Deadline: 22 January 2025)
- Optimizing Power Networks for Enhanced Resilience and Efficiency in Integrated Energy Systems 2024 (Deadline: 23 January 2025)
- Operation and Optimization of Renewable Energy Power System: 2nd Edition (Deadline: 23 January 2025)
- Fault Detection and Diagnosis Applications for Electric Vehicles and Power Electronics (Deadline: 24 January 2025)
- Advances in Power Quality and Electrical Machines (Deadline: 24 January 2025)
- Design and Optimization of Power Transformer Diagnostics: 3rd Edition (Deadline: 27 January 2025)
- Reliability and Condition Monitoring of Electric Motors and Drives (Deadline: 28 January 2025)
- Advanced Topologies and Control Strategies in Electric Machines and Drives (Deadline: 31 January 2025)
- Advanced Technologies in Power Quality and Solutions—2nd Edition (Deadline: 31 January 2025)
- Artificial Intelligence for Motor Drive Systems and Its Applications (Deadline: 31 January 2025)
- Condition Monitoring of Power System Components 2024 (Deadline: 31 January 2025)
- Advances in Power Converters and Inverters (Deadline: 15 February 2025)
- Emerging Trends in Superconductivity for Electric Power Technologies (Deadline: 18 February 2025)
- Energy, Electrical and Power Engineering: 3rd Edition (Deadline: 20 February 2025)
- Electromagnetic Modeling for Power Electronics (Deadline: 20 February 2025)
- Linear and Nonlinear Electric Circuits: Theoretical Analysis and Applications—2nd Edition (Deadline: 20 February 2025)
- Magnetic Field Computations and Energy Efficiency Studies in Electrical Machines (Deadline: 25 February 2025)
- Condition Monitoring of Electrical Machines Based on Models (Deadline: 25 February 2025)
- Challenges to Transient Stability of Power Grids with Increasing Inverter-Based Energy Resources and Contempary Solutions (Deadline: 25 February 2025)
- Modelling, Condition Monitoring and Design of Electrical Machines (Deadline: 25 February 2025)
- Power Transmission and Distribution Equipment and Systems: 2nd Edition (Deadline: 25 February 2025)
- Advances and Optimization of Electric Energy System—2nd Edition (Deadline: 28 February 2025)
- Future of Transport: Hybrid Electrification and Hydrogen Integration in Vehicles and Infrastructure (Deadline: 28 February 2025)
- Smart Power System Management Based on Synchronized Measurement Applications (Deadline: 28 February 2025)
- Energy-Efficient Advances in More Electric Aircraft (Deadline: 28 February 2025)
- Experimental and Modeling Methods, and Novel Applications of Electromagnetic Energy (Deadline: 5 March 2025)
- Trends and Challenges in Cyber-Physical Energy Systems (Deadline: 5 March 2025)
- Design, Analysis, Optimization and Control of Electric Machines (Deadline: 10 March 2025)
- Applications of Electromagnetism in Energy Efficiency (Deadline: 10 March 2025)
- Electrical Equipment State Measurement and Intelligent Calculation (Deadline: 10 March 2025)
- Frequency Regulation in Low-Inertia Renewable-Energy-Dominated Grid II (Deadline: 19 March 2025)
- Innovation in High-Voltage Technology and Power Management (Deadline: 20 March 2025)
- Driving, Reliability, and Applications of Wide Bandgap Power Devices and Hybrid Power Devices (Deadline: 25 March 2025)
- Control and Optimization of Electrical Power and Energy Systems to Integrate More Renewable and Sustainable Energy Resources (Deadline: 25 March 2025)
- Neural Networks and Deep Learning and Their Applications in Electrical Engineering (Deadline: 31 March 2025)
- Planning, Operation, and Control of New Power Systems (Deadline: 31 March 2025)
- Advances in Power Distribution Systems (Deadline: 31 March 2025)
- Improvements in Grounding Practice: Topology of Grounding Systems, Soil Characteristics Impact, and Simulation Methods for Transients’ Studies (Deadline: 31 March 2025)
- Power Quality in Modern Distribution Systems: Latest Advances and Prospects (Deadline: 31 March 2025)
- Topology Optimization of Special Power Supply and Balance Control of Distribution System (Deadline: 31 March 2025)
- Electronics for Energy Conversion and Renewables (Deadline: 1 April 2025)
- Optimization of Building Energy Systems and Energy Grids (Deadline: 10 April 2025)
- Developments in Automatic Control in Drives and Power Electronics (Deadline: 10 April 2025)
- Electric Machinery and Transformers III (Deadline: 10 April 2025)
- Analysis and Design of High-Energy-Efficiency Permanent Magnet Machines: 2nd Edition (Deadline: 15 April 2025)
- Failure Diagnosis and Prognosis of AC Rotating Machines (Deadline: 15 April 2025)
- New Progress in Electricity Demand Forecasting (Deadline: 15 April 2025)
- Advances in Fault Detection, Diagnosis and Prognosis in Industrial Motors—2nd Edition (Deadline: 15 April 2025)
- Power Electronic Design and Applications in Power Generation, Transmission, and Distribution Systems (Deadline: 25 April 2025)
- Operation and Control of Distributed Power Resources Under Market Environment (Deadline: 25 April 2025)
- Advances in Cooperative Control and State Estimation of Power Systems with Large Scale Renewable Energy Sources: 2nd Edition (Deadline: 25 April 2025)
- Design and Production Process Optimization for High Performance and Energy Efficiency in Electrical Machines (Deadline: 30 April 2025)
- Advanced Control of Electrical Drives and Power Converters (Deadline: 30 April 2025)
- Electrical Machine Systems with High Efficiency, Reliability and Integration (Deadline: 30 April 2025)
- Advancements in Electromagnetic Technology for Electrical Engineering (Deadline: 5 May 2025)
- Computational Intelligence in Electrical Systems: 2nd Edition (Deadline: 15 May 2025)
- Recent Advances in Control Algorithms for a Fault-Tolerant PMSM Drives (Deadline: 15 May 2025)
- Pulsed Power Science and High Voltage Discharge (Deadline: 25 May 2025)
- Advanced Structures, Fault Diagnosis and Tolerant Control of Permanent Magnet Synchronous Motors: 2nd Edition (Deadline: 17 June 2025)
- Optimization Design of Electromagnetic Mechanism (Deadline: 12 July 2026)
Topical Collections
Following topical collections within this section are currently open for submissions:
